From the Sector

Polyester has been the cornerstone of the textile printing industry for decades. Its compatibility with the digital sublimation process—a cost-effective, simple technology—has driven exponential growth in polyester printing. However, the very characteristics that make polyester well suited for sublimation printing render this printing technique unsuitable for other materials, such as cotton and some blended fibres, leaving a significant gap in the market.

This gap was, until recently, partially filled by direct-to-textile printing. However, this method requires substantial initial investments in equipment and heavily relies on the time- and resource-consuming pre- and post-processing of fabrics to ensure colourfastness, colour accuracy, and compatibility with different substrates. Consequently, a need arose for a more sustainable and cost-effective solution that could cater to a wider range of textiles.

In response to this demand, Mimaki spent six years developing a breakthrough technology, TRAPIS, a simple two-step textile transfer printing solution, consisting of only an inkjet printer and a high-pressure calender. The design of choice is printed by the inkjet printer onto the company’s groundbreaking Texcol® pigment ink transfer paper. This is then transferred to the application via the calender.

Entirely removing the treatment stages means that printing on non-polyester materials has gone from an expensive and time-consuming task to one that is simple, cost-efficient and more sustainable.

Ideal for home textiles and soft signage which often require vibrant colours but varied materials, this technology gives printers the ability to print on a wide variety of materials, including natural fibres like cotton and silk without losing stretchability or colourfastness. All this can be done with just one type of ink, making the process flexible and adaptable to customer demands.  

The pre-treatment and washing of the fabric is often needed in digital dye printing, producing a significant amount of wastewater in the process. TRAPIS eliminates those stages altogether and is almost entirely waterless, saving around 14.5 litres per square metre of water, an almost 90% decrease in comparison to digital dye printing .

Additionally, this eliminates the need for wastewater treatment facilities, which can be both expensive and constrictive when it comes to where the solution is installed.

Mimaki Deutschland wird von April bis September 2024 jeden Monat Tage des offenen Showrooms aka „Mimaki Demo Days“, abhalten. In diesen Tagen wird es jedem Endkunden und Interessenten ermöglicht, eine individuelle Demonstration direkt bei Mimaki zu erleben. Eigene Druckdaten und Medien können mitgebracht werden.

„Mit den Mimaki Demo Days soll unser Kontakt zum Markt gestärkt und auch der Zugang vom Anwender zu neuesten Technologien erleichtert werden“, erklärt Hisashi Takeuchi, Geschäftsführer der Mimaki Deutschland GmbH die Intention. Alle Mimaki Demo Days dauern zehn Arbeitstage und innerhalb dieser Zeit können die Interessenten ihren Besuch mit dem Mimaki-Team planen.

Dafür gibt es mehrere Anreize für die Besucher:

• Mimaki Deutschland beherbergt in München und Hagen viele aktuelle Modelle. Auf Wunsch kann eine Demonstration mit mehreren Geräten und Tintentypen organisiert werden.
• Große High-End Geräte wie JFX600-2513 oder Tiger600-1800TS, die normalerweise auf großen Messen zu besichtigen sind, stehen für eigene Testdrucke bereit.
• Hinzu kommen in fast jedem Monat neue Produkte: Im April wird ein Teil der FESPA- Neuheiten wie der UCJV330-160 und das Kebab HS-System verfügbar sein. Weitere FESPA-Erscheinungen wie der JFX600-2531, CFX-2531 und TRAPIS (Transfer Pigment System) folgen im kommenden Quartal.

Mimaki Europe wird auf der FESPA Global Print Expo 2024 (19. bis 22. März 2024) seine neuesten Produkte im Bereich der UV-Drucktechnologie vorstellen. Als offizieller UV Excellence Partner der FESPA wird Mimaki einige seiner UV-Lösungen in der Mitte seines Standes und in seinem eigenen Experience Centre präsentieren.

Während der täglichen Führungen durch das Mimaki Experience Centre haben die Besucher die Gelegenheit, das Mimaki-Portfolio – Sign & Graphics, Textile & Apparel, 3D-Druck - zu erkunden. Die Tour wird auch Vorführungen von zwei neuen, noch nicht auf dem Markt befindlichen Produkten für den Sign & Graphics Bereich beinhalten.

In der „Sustainability Corner“ des Mimaki-Standes wird ein innovatives, industrielles Textildrucksystem vorgestellt, welches die Zukunftsvision von Mimaki widerspiegelt. Mimakis FESPA-Angebot mit UV-Technologie besteht aus dem kürzlich eingeführten UJV100-160Plus und UCJV330-160. Der UJV100-160Plus zeichnet sich durch einen niedrigen Stromverbrauch aus und bietet zusätzliche Funktionen zur Steigerung der Kundenrentabilität. Der integrierte Drucker/Schneideplotter UCJV330-160 ist eine neue Ergänzung des Produktportfolios der 330er-Serie von Mimaki und bietet Hochgeschwindigkeits- und Qualitätsdruck für verschiedene Anwendungen.

Nachdem Mimaki letztes Jahr in den DTF-Markt eingestiegen ist, wird das neueste Produkt des Unternehmens, der TxF300-75, zum ersten Mal auf einer EMEA-weiten Messe vorgestellt

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

NOPINZ places a strong emphasis on sustainability and is committed to minimising its environmental impact. Using a microfactory approach gives better oversight and control of the manufacturing process, including sourcing materials sustainably and locally where possible, reducing transportation, and improving access to recycling. “Our ‘zero to landfill’ policy, means that we reduce our wastage where possible and either recycle or donate excess product to charity,” Blake adds. “We hope to become a B-Corp company in the future.”

“We tested out a few printers, before we ultimately settled on Mimaki,” Blake Pond, the founder of NOPINZ explained. Now the company’s line-up entirely consists of Mimaki’s textile dye sublimation solutions.
“During our search we prioritised the ability to produce fluorescence and accurately replicate colours. Customers often come to us with existing kit made by other manufacturers, which they want to match, so accurately replicating colour is extremely important. And even without existing kit, customers occasionally ask for specific pantone colours. When it comes to cycling kit, colour is often pivotal when considering where to buy from.”

As two flagship dye sublimation printers, both the TS300P-1800 and TS55-1800 are equipped to print on the various technical fabrics that are needed for cycling attire and faithfully reproduce colours to meet customer expectations.

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

Direct-to-film vs. Screen Printing
Direct-to-film printing is the process of digitally printing directly onto a special transfer film sheet. The printed film is subsequently sprinkled with a hot-melt powder and heated. Once the transfer sheet is cured and dried, it can be heat-pressed onto a variety of fabrics to create premium transferred designs for customised merchandising, sportswear, and an array of other promotional applications for the textile market. Compared with traditional screen printing, the plate creation required for that process is far too time-consuming. Not only this, but it does not match direct-to-film’s ability to produce vivid colours and quality details such as shapes, lettering, and motifs often sought after in the promotional and merchandising space for bespoke textiles.

The Mimaki TxF150-75
Mimaki’s first direct-to-film inkjet printer is the TxF150-75, a fitting extension to the 150 series, with a maximum printing width of 80cm. Offering a stable printing plotter, the model’s built-in ink circulation system and degassed ink pack are resolutions to common direct-to-film challenges such as poor ink ejection and white ink clogging. The new printer also includes core Mimaki features including NCU (Nozzle Check Unit) and NRS (Nozzle Recovery System) for stable, uninterrupted print production. Operating in harmony with the textile printer itself is Mimaki’s ECO PASSPORT by OEKO-TEX® certified water-based pigment textile inks, formulated especially for the TxF150-75. Coupled with Mimaki’s RasterLink7 RIP software, users are offered end-to-end oversight and efficiency from creative design to final product.

In addition, and in line with Mimaki’s collaborative approach to meeting customer needs, Adkins has developed an 80cm wide powder shaker cure unit to complete this ‘A brand’ direct-to-film printing solution. By offering the printer and post-processing unit at 80cm wide, customers can print larger garments with less waste and quicker production times, making the process much more cost effective.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO₂ emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Mimaki Europe kehrt in diesem Jahr als Goldsponsor auf die FESPA Global Print Expo 2023 zurück (23. bis 26. Mai in München, Deutschland). Mit seinen neuesten Innovationen, Technologien und Kooperationsprojekten wird das Unternehmen gemeinsam mit anderen Branchenvertretern auf der FESPA „neue Perspektiven“ präsentieren. Mimaki wird seine Flaggschiff-Drucker und -Schneideplotter für den Werbetechnik-, Industrie- und Textilmarkt vorstellen, darunter den kürzlich angekündigten DTF-Drucker (Direct-to-Film) TxF150-75, die leistungsstarke 330-Serie und die 100-Einstiegsserie.

TxF150-75, der auf der FESPA sein internationales Messedebüt geben wird, ist Mimakis erster Vorstoß in die DTF-Technologie, ein einfaches und kostengünstiges Verfahren zur Veredelung von Kleidungsstücken, vor allem T-Shirts. Durch die in das Gerät integrierten Kerntechnologien von Mimaki werden häufig auftretende DTF-Druckprobleme verhindert, z. B. schlechter Tintenausstoß und das Verstopfen der Düsen für weiße Tinte, sodass alle Prozesse effizient und mit minimalem Aufwand durchgeführt werden können.

Zu den weiteren bemerkenswerten Technologien, die auf der Messe gezeigt werden, gehören Mimakis Flaggschiffe für Sign Graphics, von der 100 Einstiegsserie bis zur 330-Hochleistungsserie. Der Druck- und Schneide-Workflow wird mit Mimakis neuestem Schneideplotter, dem CG-AR Serie, demonstriert. Aus dem industriellen Bereich von Mimaki können die Besucher die fortschrittlichen UV-Flachbettdrucker des Unternehmens erleben, vom kleineren UJF-6042 MkII e bis zum großformatigen JFX600-2513. Bei den Textildruckern werden die Sublimationsdrucker TS100-1600 und TS330-1600 zu sehen sein.

Ganz im Sinne des FESPA-Mottos „New Perspectives“ wird Mimaki die globale Messe nutzen, um die Druckindustrie mit einem verschärften Blick auf die Nachhaltigkeit in einem neuen Kontext zu betrachten. Das Unternehmen plant, sein Engagement in diesem Bereich zu bekräftigen und mit kreativen, umweltbewussten Experten aus der gesamten Branche zusammenzuarbeiten. In diesem Jahr wird Mimaki die von der Natur inspirierten Kunstwerke des niederländischen Surrealisten Rik Lina ausstellen.

Auch die bekannte Customer Gallery wird wieder zu sehen sein, dieses Mal mit einer Reihe von inspirierenden Anwendungen, die von Mimakis Kunden aus unterschiedlichen Bereichen erstellt wurden − vom Industrie- und Textildruck über die Werbetechnik bis hin zum 3D-Druck.

Mimaki announce their third Global Innovation Days (19th – 21st October 2022). This collaborative virtual experience unites Mimaki’s regional offices to discuss trends across the different markets and the American, Asian, and European regions operated in by Mimaki, through a series of live and pre-recorded demonstrations, webinars, and round-table discussions. The programme of events will be led by experts from Mimaki Europe, Japan, USA and Australia.

With a focus on addressing the queries and requirements across the many facets of the print industry, the event will see collaborations with the likes of FESPA, from whom spokespeople will be attending to discuss the latest trends and innovations identified at FESPA this year, as well as a look ahead to next year’s event and what people can expect to see.

Attendees will also have the opportunity to further explore the latest additions to Mimaki’s product portfolio, with demonstrations of the technologies and the applications that they are able to create coming live from the Mimaki showroom in Amsterdam. The 330 series, including the JV330-160, CJV330-160 and TS330-1600, will be showcased, as well as the full-colour capabilities of the 3DUJ-2207 3D printer, and Mimaki’s latest flatbed printer, the JFX600-2513, which boasts speeds thrice superior to that of its predecessor. Another highlight of the event will be a discussion held with leading print media and software vendors, to examine the current market trends from outside of the manufacturing perspective.

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

In the Spotlight
Standout technology on show includes the new 330 series, consisting of the JV330-160, the CJV330-160 and the TS330-1600. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. The eco-solvent inkjet printers, the JV330-160 and CJV330-160, boast innovative features such as the new media changer that allows three rolls of media to be loaded simultaneously, and the XY slitter, which provides in-line X-axis and Y-axis sheet-fed cutting. The TS330-1600, which will make its international tradeshow debut at FESPA, is a sublimation printer with an improved take-up system and optional add-ons to further increase efficiency, including a 10kg ink tank supply unit and a mini jumbo roll unit.

Additionally, FESPA visitors will see Mimaki’s all new CG-AR cutting plotter.

Urbanising FESPA 2022
In line with FESPA 2022’s tagline, ‘Experience print in motion’, Mimaki’s stand will bring a vibrancy to the show, by demonstrating real-world applications alongside the machines that created them. This year will see Mimaki’s stand convey the streets of Berlin in its design, and urban inspired works by designers, including Nicky Nahafahik and Xavier Protano, all printed using various Mimaki’s printing technologies and displayed on the stand - allowing visitors experience Berlin from inside the Messe Berlin halls. Mimaki will also join forces with Dutch designer Tessa Koops to create a selection of unique fashion items, after their successful collaborations in 2019.

Celebrating Customer Success
As a centrepiece of Mimaki’s stand, the customer gallery will return to FESPA 2022, showcasing and celebrating customer samples and testimonials. There will also be live demonstrations of Mimaki’s latest technologies in dedicated sign, UV and textile application areas. The latest UV printers on display include the UJV100, and the JFX and UJF series. The acclaimed 3D printer, the 3DUJ-2207, will also return to FESPA this year to showcase the many high-quality, full-colour models, including figurines, scale models and prototypes, achievable with this cost-efficient, entry-level printer.

To answer questions about the applications and Mimaki technologies, hospitality and meeting areas will provide space for one-to-one conversations with Mimaki experts.

• Mimaki’s Newest Product Series to Transform the Sign Graphics and Textile Markets with Improved Efficiency and Quality 
• Mimaki to launch the 330 Printer Series and the new entry-level cutting plotter series, the CG-AR

Mimaki Europe today announces a brand-new large format inkjet printer series, the 330 Series, including the JV330-160, CJV330-160 and TS330-1600, as well as a new range of CG-AR cutting plotters. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. Similarly, the CG-AR Series offers users new workflow enhancing, entry-level cutting plotter technologies available in three sizes. Both launches align with Mimaki’s objective to grow both its high-end and entry-level product range, to further encourage and support customers expanding and improving upon their printing services and product offering.

Introducing Mimaki’s latest printers – the 330 Series

Following on from the success of the 100 and 300 Plus Series, the 330 Series was developed to offer mid- to high-end printing models, focusing on high image quality and productivity. As a company renowned for its high-colour range, Mimaki’s newest printers can achieve high resolution, durable prints for both the Sign Graphic and Textile industries. 

The eco-solvent inkjet printers, the JV330-160 and CJV330-160, deliver the high-standard of colour required for indoor and outdoor sign graphics through the new “Deep Color Natural” input profile, offering eye-catching and vivid solid colours, natural skin tones as well as deep reds and neutral greys. With printing speeds of 21.0m2/h during standard mode while using 4 colours, this printer is ideal for print jobs that require quick delivery. The in-built cleaning mechanisms and monitoring features ensure an efficient workflow and allow for longer running times.

Both models feature a newly designed unwinding system that allows three rolls of media to be loaded simultaneously, greatly reducing the time and manpower required to change print media. One operator can bring the desired media into position simply by turning the media changer. Another standard feature is an “XY slitter” - a highly precise cutting technology, which provides in-line X-axis and Y-axis sheet-fed cutting. This eliminates the unwinding and rough cutting from the workflow, helping printers to significantly speed up and streamline the post-process, with less interference needed.

The print-only model JV330-160 as well as the integrated printer and cutter CJV330-160 will be available globally in April 2022.

In addition to the Sign Graphics solutions, Mimaki has also released the TS330-1600, a sublimation transfer inkjet printer, for the textile industry. Enabling both high production and high image quality, and equipped with new functions to improve stable operation, the TS330-1600 can achieve a printing speed of 69m2/h in Draft mode with a 4-colour ink set, with the fastest mode reaching up to 135m2/h. The newest cleaning mechanism applies a cloth wiper that removes unwanted ink from the nozzle surface, reducing ink splatter and improving the overall upkeep of the machine.

Increasing efficiency with entry-level CG-AR plotting cutter series

Alongside the 330 Series, Mimaki has also launched the CG-AR Series plotting cutters. Available in three different sizes (CG-60AR, CG-100AR and CG-130AR), these plotters go above and beyond current entry-level options available today. Recognising customer demand of shorter delivery times, these cutters provide increased speed and accuracy, all with user-friendly operability. In addition, the cutters have the ability to handle a diverse range of materials, such as PVC, fluorescent and reflective sheets.