From the Sector

Reset
3888 results
04.08.2021

Lenzing: Earnings more than doubled in the first half of 2021

  • Strong operating result: EBITDA at EUR 217.8 mn, cash flow from operating activities at EUR 199.8 mn
  • Major strategic projects continue fully on track – production start of the lyocell plant in Thailand in the fourth quarter of 2021
  • Start of strategic cooperation agreement for textile recycling with Södra
  • New milestones in the implementation of group-wide carbon neutrality: EUR 200 mn investment in existing locations in Asia
  • Guidance 2021: Lenzing expects EBITDA of at least EUR 360 mn

The Lenzing Group reported a significant improvement in revenue and earnings in the first half of the year. Growing optimism in the textile and apparel industry and the ongoing recovery in retail caused a substantial increase in demand and prices on the global fiber market, in particular at the beginning of the current financial year.

  • Strong operating result: EBITDA at EUR 217.8 mn, cash flow from operating activities at EUR 199.8 mn
  • Major strategic projects continue fully on track – production start of the lyocell plant in Thailand in the fourth quarter of 2021
  • Start of strategic cooperation agreement for textile recycling with Södra
  • New milestones in the implementation of group-wide carbon neutrality: EUR 200 mn investment in existing locations in Asia
  • Guidance 2021: Lenzing expects EBITDA of at least EUR 360 mn

The Lenzing Group reported a significant improvement in revenue and earnings in the first half of the year. Growing optimism in the textile and apparel industry and the ongoing recovery in retail caused a substantial increase in demand and prices on the global fiber market, in particular at the beginning of the current financial year.

Revenue rose by 27.5 percent to EUR 1.03 bn in the first half of 2021. This increase is primarily attributable to higher viscose prices, which stood at more than RMB 15,000 in May thanks to significantly higher demand for fibers, especially in Asia. The focus on wood-based specialty fibers such as TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ branded fibers also had a positive impact on the revenue development; the share of specialty fibers in fiber revenue rose to 72.8 percent in the reporting period. The negative impact of more unfavorable currency effects was consequently more than offset.

The earnings development essentially reflects the positive market development and was additionally reinforced by measures to improve efficiency. Energy and logistics costs increased significantly throughout the entire reporting period. EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled and amounted to EUR 217.8 mn in the first half of 2021 (compared to EUR 95.6 mn in the first half of 2020). The EBITDA margin rose from 11.8 percent to 21.1 percent. Net profit for the period amounted to EUR 96.1 mn (compared to a net loss of EUR minus 14.4 mn in the first half of 2020) and earnings per share to EUR 3.06 (compared to EUR 0.06 in the first half of 2020).

“Lenzing had a very strong first half-year. The demand for our sustainably produced specialty fibers once again developed excellently,” says Stefan Doboczky, CEO of the Lenzing Group.

Source:

Lenzing AG

(c) EconCore
03.08.2021

Basaltex & EconCore: New composite of basalt fibres for rail carriage interiors

  • Testing and development achieve rigidity and safety milestone

Basaltex, pioneers in innovative uses of basalt fibres, has achieved a significant milestone in developing and testing a new composite material solution comprising fibres of basalt combined with EconCore’s patented honeycomb technology.

This new material development has greatly improved fire resistance and is highly rigid, as well as the usual honeycomb properties of light-weighting.

The company has tested the composite of basalt fibres, a bio resin and rPET honeycomb.

Filaments of only stone fibres are extruded at a temperature of 1450°C, similar to glass but with a number of advantages, not least the absence of boric acid in the process.

Combining this ecological fibre with EconCore’s sustainable technology using rPET, and the bioresin polyfurfuryl alcohol - 100% derived from a waste stream of sugar cane - make this a very sustainable and environmentally friendly product, unlike the majority of thermoset solutions in this type of application.

  • Testing and development achieve rigidity and safety milestone

Basaltex, pioneers in innovative uses of basalt fibres, has achieved a significant milestone in developing and testing a new composite material solution comprising fibres of basalt combined with EconCore’s patented honeycomb technology.

This new material development has greatly improved fire resistance and is highly rigid, as well as the usual honeycomb properties of light-weighting.

The company has tested the composite of basalt fibres, a bio resin and rPET honeycomb.

Filaments of only stone fibres are extruded at a temperature of 1450°C, similar to glass but with a number of advantages, not least the absence of boric acid in the process.

Combining this ecological fibre with EconCore’s sustainable technology using rPET, and the bioresin polyfurfuryl alcohol - 100% derived from a waste stream of sugar cane - make this a very sustainable and environmentally friendly product, unlike the majority of thermoset solutions in this type of application.

Railway applications require materials with enhanced fire resistance and the testing has shown that the EconCore-Basaltex solution fits these needs well, at the same time offering the perspective of drastic weight reduction against traditional monolithic GRPs used rather widely in train interiors.

Such sandwich panel could be deployed in applications such as cladding panels, partitions, tables and flooring. The thermoset skin layers give a fast cure at elevated temperature, meaning short cycle time and enabling automated production’.

As well as the railway interior application, this new material combination could be used in any application that requires fire performance combined with a low weight.

More information:
Basaltex basalt fibers EconCore
Source:

EconCore

03.08.2021

Asahi Kasei Spandex Europe GmbH will be discontinued by March 2022

  • "Optimizing the global strategy of its ROICA™ premium stretch fiber business"

Asahi Kasei Corporation markets premium stretch fiber (elastic polyurethane filament) under the brand of ROICA™ with superior performance features enabled by integrated production from raw material to finished yarn based on its advanced technology.

Asahi Kasei operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with numerous sales offices around the world. Asahi Kasei has now decided to restructure and optimize its global strategy in order to further improve the business performance and level of sales services.

  • "Optimizing the global strategy of its ROICA™ premium stretch fiber business"

Asahi Kasei Corporation markets premium stretch fiber (elastic polyurethane filament) under the brand of ROICA™ with superior performance features enabled by integrated production from raw material to finished yarn based on its advanced technology.

Asahi Kasei operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with numerous sales offices around the world. Asahi Kasei has now decided to restructure and optimize its global strategy in order to further improve the business performance and level of sales services.

As a part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH, will be discontinued by March 31, 2022.
Recognizing the importance of the European market as leading fashion market and in light of sustainable trends together with valued customers and supply chains, Asahi Kasei will continue sales, technical, and marketing services in Europe from Asahi Kasei Europe, the European regional headquarters of the Asahi Kasei Group, focusing on ROICA™ added value products manufactured at its global ROICA™ production sites.

More information:
Asahi Kasei stretch fibre ROICA™
Source:

Asahi KASEI

03.08.2021

Sebastian Hofmann neuer President Global Marketing bei FHCS

Sebastian Hofmann übernimmt die Position President Global Marketing bei Freudenberg Home and Cleaning Solutions (FHCS). Er tritt die Nachfolge von Dr. Andreas Mack an, der das Unternehmen im Juli verlassen hat. In seiner neuen Funktion verantwortet Hofmann weltweit das Marketing für die Haushalts- und Reinigungsproduktemarken des Weinheimer Unternehmens. Dazu gehören unter anderem die Marken Vileda, Vileda Professional, Gimi, Marigold, Gala und O-Cedar. Darüber hinaus verantwortet er die Produktentwicklung, den weltweiten Vertrieb, die Markenkommunikation sowie das E-Commerce. Hofmann berichtet an Karin Overbeck (CEO).

Hofmann blickt auf 15 Jahre Erfahrung in regionalen und globalen Brand- und Marketing-Positionen in der Konsumgüterindustrie zurück. So verantwortete er bei Procter & Gamble die Wäschepflegemarken Ariel und Lenor sowie die Rasurmarken Gillette und Venus. Zuletzt verantwortete Hofmann dort als Senior Brand Director das globale Geschäft der Marke Braun.

Sebastian Hofmann übernimmt die Position President Global Marketing bei Freudenberg Home and Cleaning Solutions (FHCS). Er tritt die Nachfolge von Dr. Andreas Mack an, der das Unternehmen im Juli verlassen hat. In seiner neuen Funktion verantwortet Hofmann weltweit das Marketing für die Haushalts- und Reinigungsproduktemarken des Weinheimer Unternehmens. Dazu gehören unter anderem die Marken Vileda, Vileda Professional, Gimi, Marigold, Gala und O-Cedar. Darüber hinaus verantwortet er die Produktentwicklung, den weltweiten Vertrieb, die Markenkommunikation sowie das E-Commerce. Hofmann berichtet an Karin Overbeck (CEO).

Hofmann blickt auf 15 Jahre Erfahrung in regionalen und globalen Brand- und Marketing-Positionen in der Konsumgüterindustrie zurück. So verantwortete er bei Procter & Gamble die Wäschepflegemarken Ariel und Lenor sowie die Rasurmarken Gillette und Venus. Zuletzt verantwortete Hofmann dort als Senior Brand Director das globale Geschäft der Marke Braun.

More information:
Vileda
Source:

Publik. Agentur für Kommunikation i.A. Vileda GmbH

Freudenberg: Protection and Flexibility for Workwear (c) Freudenberg Performance Materials Holding SE & Co. KG
03.08.2021

Freudenberg: Protection and Flexibility for Workwear

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Active contribution to sustainability
Many products of the Freudenberg Workwear Range consist of a high percentage of recycled polyester coming from post-consumer PET bottles.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

TexCoat G4 non-contact precision spray fabric-finishing system (c) Baldwin Technology Company Inc.
02.08.2021

Baldwin at Techtextil North America

  • Introducing TexCoat G4 to US textile industry
  • Non-contact precision spray fabric-finishing system enhances sustainability and process control

Baldwin Technology Company Inc. will be showcasing its TexCoat G4 non-contact precision spray fabric-finishing system at the Techtextil North America trade show, held Aug. 23 to 25, in Raleigh, North Carolina.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, and significantly reduced water and energy consumption.

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides.

  • Introducing TexCoat G4 to US textile industry
  • Non-contact precision spray fabric-finishing system enhances sustainability and process control

Baldwin Technology Company Inc. will be showcasing its TexCoat G4 non-contact precision spray fabric-finishing system at the Techtextil North America trade show, held Aug. 23 to 25, in Raleigh, North Carolina.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, and significantly reduced water and energy consumption.

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides.

Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection. The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption.

Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.

Source:

Baldwin Technology Company Inc.

(c) Andritz AG
02.08.2021

ANDRITZ to supply textile recycling line to Renaissance Textile (F)

International technology Group ANDRITZ has received an order from Renaissance Textile to deliver a recycling line for their first recycling platform, located in Laval, France. Start-up of the recycling line from ANDRITZ Laroche is scheduled for the end of Q2 2022.

First of all, postconsumer waste fibers will be opened, then mixed with virgin fibers and spun once again in order to ultimately produce new textiles. The specific design of this line is the outcome of close collaboration between experts from ANDRITZ Laroche and the customer, with customized trials being conducted at the ANDRITZ technical center in Cours, France.

Renaissance Textile’s target is to become the first French recycling platform dedicated to end-of-life
textiles, and the company will soon open the new 12,000 sqm plant.

International technology Group ANDRITZ has received an order from Renaissance Textile to deliver a recycling line for their first recycling platform, located in Laval, France. Start-up of the recycling line from ANDRITZ Laroche is scheduled for the end of Q2 2022.

First of all, postconsumer waste fibers will be opened, then mixed with virgin fibers and spun once again in order to ultimately produce new textiles. The specific design of this line is the outcome of close collaboration between experts from ANDRITZ Laroche and the customer, with customized trials being conducted at the ANDRITZ technical center in Cours, France.

Renaissance Textile’s target is to become the first French recycling platform dedicated to end-of-life
textiles, and the company will soon open the new 12,000 sqm plant.

More information:
Andritz Andritz AG circular economy
Source:

Andritz AG

30.07.2021

Industrie kann Flexi-Joker in der Energiewende werden

  • Teilhabe des Sektors an den Energiemärkten verspricht Stabilität der Netze und Nutzen für Unternehmen

Damit sich Verbraucher und Industrie möglichst schnell mit immer größeren Anteilen von Wind- und Solarstrom versorgen lassen, muss das deutsche Energiesystem flexibler werden. Das geht nicht ohne die Industrie. Als einer der größten Energiekunden sollte sie künftig mit ihrem Bedarf aber auch mit der Bereitstellung und Speicherung von Energie aktiv und flexibel an den Energiemärkten handeln. Wie das geht und wie sich das lohnen kann, erforscht, erprobt und verwirklicht angewandte Forschung aus der Zuse-Gemeinschaft.
 

  • Teilhabe des Sektors an den Energiemärkten verspricht Stabilität der Netze und Nutzen für Unternehmen

Damit sich Verbraucher und Industrie möglichst schnell mit immer größeren Anteilen von Wind- und Solarstrom versorgen lassen, muss das deutsche Energiesystem flexibler werden. Das geht nicht ohne die Industrie. Als einer der größten Energiekunden sollte sie künftig mit ihrem Bedarf aber auch mit der Bereitstellung und Speicherung von Energie aktiv und flexibel an den Energiemärkten handeln. Wie das geht und wie sich das lohnen kann, erforscht, erprobt und verwirklicht angewandte Forschung aus der Zuse-Gemeinschaft.
 
Rund 28 Prozent des deutschen Endenergieverbrauchs entfallen auf die Industrie. Für die Energiewende nimmt der Sektor auch deshalb eine Schlüsselstellung ein, weil er hohe Bedarfe sowohl an Strom wie auch an Wärme bzw. Kälte hat. Für die künftig erforderliche erhöhte Flexibilität an den Energiemärkten müssen jedoch Wärme- und Strommarkt gemeinsam für höhere Anteile erneuerbarer Energien erschlossen werden. Die Gesellschaft zur Förderung angewandter Informatik (GFaI) aus Berlin entwickelt aktuell mit Partnern im vom Bundeswirtschaftsministerium geförderten Projekt „Flexibilitätswende“ Modelle, um für Industriebetriebe die Eintrittsschwelle zur Teilnahme an den Energiemärkten zu senken. Das geht mit möglichst praxisnahen Software-Prototypen, die aber dennoch auf das jeweilige Unternehmen angepasst werden müssen.

Nicht nur den Strom- und Wärme-, sondern auch den Kältemarkt gilt es künftig für die mit der Energiewende steigenden Anforderungen an die Flexibilisierung von Angebot und Nachfrage zu ertüchtigen, zumal er in Zeiten von Klimaerhitzung und Digitalisierung eine wachsende Bedeutung am Energiemarkt erlangt. Besonders hoch ist der Kältebedarf in vielen Branchen am frühen Nachmittag, wenn auch die Strompreise hoch sind. Sinnvoll sind deshalb Kältespeicher, damit die Unternehmen ihren Strombedarf für Kälteanwendungen größtenteils zu Zeiten niedriger Strompreise, z.B. nachts, decken können. Möglich ist das mit einem  vom Institut für Luft- und Kältetechnik (ILK) perfektionierten Eisspeicher,  der Vakuum-Flüssigeis-Technologie. Sie lässt sich mit dem Knowhow der Forschenden aus Dresden für Verbraucher in Industrie- und Dienstleistungsbranchen skalieren und entsprechend dimensionieren, z.B. für Rechenzentren.

Source:

Zuse-Gemeinschaft

29.07.2021

Autoneum benefited from market dynamics

Solid net profit and further strengthening of the balance sheet thanks to significant revenue and profitability increases

The automobile industry recovered significantly in the first half of 2021 compared to the prior-year period, which had been impacted by the effects of the coronavirus pandemic. Autoneum benefited from the market dynamics and managed to increase its revenue in local currencies by 24.3% in the first semester. EBIT rose to CHF 44.7 million thanks to higher revenues and further progress in the turnaround in North America, corresponding to an EBIT margin of 5.0%. The strong free cash flow of CHF 67.2 million has allowed for a further reduction in net debt.

Solid net profit and further strengthening of the balance sheet thanks to significant revenue and profitability increases

The automobile industry recovered significantly in the first half of 2021 compared to the prior-year period, which had been impacted by the effects of the coronavirus pandemic. Autoneum benefited from the market dynamics and managed to increase its revenue in local currencies by 24.3% in the first semester. EBIT rose to CHF 44.7 million thanks to higher revenues and further progress in the turnaround in North America, corresponding to an EBIT margin of 5.0%. The strong free cash flow of CHF 67.2 million has allowed for a further reduction in net debt.

In the first half of 2021, 29.2% more light vehicles were produced worldwide than in the coronavirus-hit first half of 2020. The market recovery, though significant, was hampered by the global semiconductor shortage, which led to temporary production stoppages and manufacturers producing lower vehicle volumes. Autoneum increased revenue in local currencies by 24.3% in the first six months. In Swiss francs, revenue climbed by 21.9% to CHF 890.3 million. Business Group SAMEA (South America, Middle East and Africa) grew clearly above market, while the shortage of semiconductors in North America in particular impacted the production of models supplied by Autoneum and the revenue development of Business Group North America.

Autoneum managed to improve its operating result (EBIT) considerably by CHF 76.5 million in the first six months compared to the prior-year period. In addition to higher revenues, this was mainly due to the immediate and sustainable adjustment of the cost structure in all Business Groups to the new market reality in 2020 as well as the improved earnings achieved in the turnaround program in North America. Higher material costs, however, had a negative impact on the operating result. EBIT in the amount of CHF 44.7 million (prior-year period: CHF –31.8 million) corresponds to an EBIT margin of 5.0% (prior-year period: –4.4%).

The development of global light vehicle production in the second half of 2021 remains uncertain due to the semiconductor shortage. Although there is a high demand from end customers in all regions, it can be assumed that the shortage of chips will continue to impact automobile production in the second half of the year, but not as severely as in the second quarter of the first half-year.

Revenue in the second half-year 2021 is expected to be higher than in the first semester. Based on the unfavorable allocation of semiconductors to vehicle models supplied by Autoneum in the first half of 2021, revenue development is likely to be slightly below market for the full year 2021. With an easing of the semiconductor shortage, this will normalize.

Source:

Autoneum Management Ltd

29.07.2021

Epson für Deutschen Nachhaltigkeitspreis 2022 nominiert

Die Nominierten für den 14. Deutschen Nachhaltigkeitspreis für Unternehmen stehen fest. Epson Deutschland GmbH gehört im Transformationsfeld „Lieferkette“ dazu. Über die Gewinner entscheidet eine hochkarätige Jury aus Wissenschaft, Wirtschaft und Politik. Die Preisträger werden im Dezember bekanntgegeben.

Der Deutsche Nachhaltigkeitspreis prämiert Vorreiter der Nachhaltigkeit in der Wirtschaft. Ausgezeichnet werden Unternehmen, bei denen Nachhaltigkeit Teil des Geschäftsmodells ist und die mit innovativen Produkten und Dienstleistungen, hohen ökologischen Standards in der Produktion oder besonderem sozialen Engagement in ihrer Wertschöpfungskette wirksame Beiträge zur Umgestaltung leisten.

Die Nominierten für den 14. Deutschen Nachhaltigkeitspreis für Unternehmen stehen fest. Epson Deutschland GmbH gehört im Transformationsfeld „Lieferkette“ dazu. Über die Gewinner entscheidet eine hochkarätige Jury aus Wissenschaft, Wirtschaft und Politik. Die Preisträger werden im Dezember bekanntgegeben.

Der Deutsche Nachhaltigkeitspreis prämiert Vorreiter der Nachhaltigkeit in der Wirtschaft. Ausgezeichnet werden Unternehmen, bei denen Nachhaltigkeit Teil des Geschäftsmodells ist und die mit innovativen Produkten und Dienstleistungen, hohen ökologischen Standards in der Produktion oder besonderem sozialen Engagement in ihrer Wertschöpfungskette wirksame Beiträge zur Umgestaltung leisten.

Zu dem ganzheitlichen Ansatz des Konzerns gehört, dass Epson Produkte ausschließlich in Epson-eigenen Fabriken hergestellt werden – gegen den Trend zur Fremdfertigung in der IT-Branche. So stellt das Unternehmen sicher, dass während der Produktion hohe Umwelt-, Arbeits- und Sozialstandards eingehalten werden – unabhängig davon, in welchem Land sich der Standort befindet. Dieselben Anforderungen werden über den Epson Verhaltenskodex auch an die Lieferkette gestellt und überprüft. Epson Deutschland GmbH spricht sich für eine umfassende Kontrolle von Lieferketten aus und begrüßt die Einführung eines deutschen Lieferkettengesetzes ab dem Jahr 2023.

Source:

Epson Deutschland GmbH

27.07.2021

Lenzing raises outlook for current financial year 2021

The Lenzing Group recorded a significantly improved development of its operating result in the first half of 2021. The preliminary EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled year-on-year to EUR 217.8 mn (compared to EUR 95.6 mn in the first half of 2020).

The currently positive environment is still characterized by a high level of uncertainty regarding the COVID-19 pandemic. Despite the continued limited visibility, the Managing Board of the Lenzing Group raises the outlook for the 2021 financial year.

Taking into account the above factors and due to the very positive development of the first half of the year, the Lenzing Group expects the EBITDA in 2021 to reach at least a level of EUR 360 mn.

The results of the Lenzing Group for the first half of 2021 will be published on Wednesday, August 04, 2021.

The Lenzing Group recorded a significantly improved development of its operating result in the first half of 2021. The preliminary EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled year-on-year to EUR 217.8 mn (compared to EUR 95.6 mn in the first half of 2020).

The currently positive environment is still characterized by a high level of uncertainty regarding the COVID-19 pandemic. Despite the continued limited visibility, the Managing Board of the Lenzing Group raises the outlook for the 2021 financial year.

Taking into account the above factors and due to the very positive development of the first half of the year, the Lenzing Group expects the EBITDA in 2021 to reach at least a level of EUR 360 mn.

The results of the Lenzing Group for the first half of 2021 will be published on Wednesday, August 04, 2021.

More information:
Lenzing AG
Source:

Lenzing AG

27.07.2021

Nastrificio di Cassano: Responsible and certified labels and tags

100% sustainability lives in the smallest detail, starting with the label, the element that can tell the story of responsibility. This is why Nastrificio di Cassano has created NDC Green, Made in Italy and fully traceable range that guarantees high quality standards while respecting the planet.
 
NDC Green comprises 4 categories:

100% sustainability lives in the smallest detail, starting with the label, the element that can tell the story of responsibility. This is why Nastrificio di Cassano has created NDC Green, Made in Italy and fully traceable range that guarantees high quality standards while respecting the planet.
 
NDC Green comprises 4 categories:

  • LABìO ECO-SOFT®: made using TENCEL™ lyocell  yarn which is compostable and biodegradable (as attested by TUV Austria), this product boasts performances and is resistant up to 10 domestic washings at 30°. The reference is produced with fifteen times less water consumption than cotton production and the resins used are GOTS certified.
  • LABìO HANGreen is the smart solution for the creation of hard tags, hangtags, shopping bags and garment covers and, as LABIO ECO-SOFT® range, it’s made with  compostable and biodegradable TENCEL™ lyocell yarn and the resin is compostable, too. These peculiarities make this product unique.
  • ACETATE NAIA™, the 'smart satin' that respects forests and oceans, is the NAIA™ single-ingredient solution produced by Eastman: the 100% traceable, compostable and biodegradable cellulose yarn in both soil and sea respects the natural growth rate of forests.
  • RECYCLED POLYESTER: is made from post-consumer yarn recycled from GRS-certified PET bottles. Available in both satin and resinated taffeta versions, it guarantees excellent printability for an elegant and sophisticated look
Modebusiness Award Gewinner Heiko Wunder mit Dr. Stephan Keller. (c) Ast Jürgens
26.07.2021

Modebusiness Award 2021 geht an Heiko Wunder

Im THE SKY im Dreischeibenhaus wurde Mode-Pionier und Nachhaltigkeitsvordenker Heiko Wunder am Sonntagabend, 25. Juli, mit dem Modebusiness Award ausgezeichnet. Die Landeshauptstadt ist für den gebürtigen Düsseldorfer nicht nur Lebensmittelpunkt, sondern auch Ideenschmiede und Keimzelle seines nationalen Erfolgskonzepts: seiner Modemarke "wunderwerk".

Mit Anfang 20 entstand bei Heiko Wunder der Wunsch, eine modische, ressourcenschonende und konsequent nachhaltige Modekollektion auf den Markt zu bringen: "wunderwerk". "Im Namen meiner Modemarke stecken zwei Worte: Werk kommt dabei von ehrlich verrichteter Arbeit, und das Wunder passt wegen meines Nachnamens sehr gut dazu", so der Preisträger.

Im THE SKY im Dreischeibenhaus wurde Mode-Pionier und Nachhaltigkeitsvordenker Heiko Wunder am Sonntagabend, 25. Juli, mit dem Modebusiness Award ausgezeichnet. Die Landeshauptstadt ist für den gebürtigen Düsseldorfer nicht nur Lebensmittelpunkt, sondern auch Ideenschmiede und Keimzelle seines nationalen Erfolgskonzepts: seiner Modemarke "wunderwerk".

Mit Anfang 20 entstand bei Heiko Wunder der Wunsch, eine modische, ressourcenschonende und konsequent nachhaltige Modekollektion auf den Markt zu bringen: "wunderwerk". "Im Namen meiner Modemarke stecken zwei Worte: Werk kommt dabei von ehrlich verrichteter Arbeit, und das Wunder passt wegen meines Nachnamens sehr gut dazu", so der Preisträger.

Oberbürgermeister Dr. Stephan Keller: "Der Modebusiness Award geht in diesem Jahr an Heiko Wunder, der nicht nur die lokale Modeindustrie maßgeblich geprägt hat, sondern auch eine nationale Einflussgröße in der Mode und Vordenker im Verknüpfen von Produktion und Nachhaltigkeit ist. Ich freue mich sehr, dass Mode hier in Düsseldorf nach wie vor erlebt und gelebt wird und viele namhafte Akteure aus der Mode- und Handelsbranche zur Verleihung des Modebusiness Awards zusammengekommen sind, um der Auszeichnung einen würdigen Rahmen zu verleihen."

Die Verleihung des Modebusiness Awards fand erstmalig im Rahmen der Düsseldorf Fashion Days – Festival Edition statt, die vom 21. bis zum 28. Juli 2021 sowohl Order- und Fachveranstaltungen als auch Shoppingevents und Modenschauen im gesamten Stadtgebiet präsentierten. Die Idee: Die bekannten und seit Jahrzehnten etablierten Ordertage für Fachhändler auf Messen und in den rund 600 Showrooms, die seit dem Sommer letzten Jahres unter der Marke Düsseldorf Fashion Days stattfinden, wurden um Events für Endkonsumenten erweitert. Dadurch entstand ein Mode- und Lifestyle-Festival für die gesamte Stadt, welches mit dem Shopping Day am Samstag, den 24. Juli, einen Höhepunkt für die Privatkundinnen und -kunden fand. Der Modebusiness Award war hingegen für das Fachpublikum der deutschsprachigen Modewirtschaft ein gelungener Abschluss des Wochenendes.

Source:

PR + Presseagentur textschwester

Foto: Pixabay
26.07.2021

Lenzing invests GBP 20 mn in wastewater treatment at Grimsby site

  • Full utilization of production capacity possible at the site
  • New EU environmental requirements will be fully and promptly satisfied starting in 2024

The Lenzing Group, a global provider of wood-based specialty fibers for the textile and nonwoven industries, is investing GBP 20 mn (equal to EUR 23.3 mn) to build a new, state-of-the-art wastewater treatment plant at its site in Grimsby, United Kingdom. The investment is part of the company’s plans to reduce wastewater emissions by 2022.

Once it has implemented this project, Lenzing will have biological wastewater treatment plants that meet the best available techniques (BAT) quality standard at all its production sites. The plant design, which will employ a new technology developed as part of a research project, is fully aligned with the UK regulator and supported by the local authorities.

  • Full utilization of production capacity possible at the site
  • New EU environmental requirements will be fully and promptly satisfied starting in 2024

The Lenzing Group, a global provider of wood-based specialty fibers for the textile and nonwoven industries, is investing GBP 20 mn (equal to EUR 23.3 mn) to build a new, state-of-the-art wastewater treatment plant at its site in Grimsby, United Kingdom. The investment is part of the company’s plans to reduce wastewater emissions by 2022.

Once it has implemented this project, Lenzing will have biological wastewater treatment plants that meet the best available techniques (BAT) quality standard at all its production sites. The plant design, which will employ a new technology developed as part of a research project, is fully aligned with the UK regulator and supported by the local authorities.

The site’s current wastewater situation complies fully with the EU Water Framework Directive as well as all local laws and regulations. The investment has been approved by the Supervisory Board, ensuring that construction can start this year and the plant will be commissioned well before the UK-ratified EU directive1 goes into effect. This will be the largest investment since opening this lyocell site, which manufactures premium products for technical and innovative market segments, among other things.

Responsible water use
After modernizing the wastewater treatment plant at the company’s Purwakarta site in Indonesia, the construction of the new plant in Grimsby marks another big step toward reducing the Group’s wastewater emissions 20 percent by 2022 (against a 2014 baseline). Responsible water use is one of the core elements of Lenzing’s “Naturally positive” sustainability strategy and is largely executed by using water efficiently in manufacturing and employing state-of-the-art water treatment technologies.

INDA: RISE® - Virtual Conference opens and Speakers announced (c) INDA
26.07.2021

INDA: RISE® - Virtual Conference and Speakers announced

The 11th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

The 11th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

  • Promising Materials Development Using PLA
    presented by Behnam Pourdeyhimi, Ph.D., William A. Klopman Distinguished Professor and Executive Director, North Carolina State University, The Nonwovens Institute
  • Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology at Its Best, featuring insights from Fabio Zampollo, CEO, Teknoweb Materials S.r.l.
  • Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles
    with speakers, DeeAnn Nelson, Ph.D., Development Program Manager, and Nick Carter, Vice-President of Marketing and Business Intelligence, both from Avgol Nonwovens
  • High-Loft, Ultra-Soft Hygiene Solutions,
    presented by Paul Rollin, Ph.D., Global Team Lead – Nonwovens, ExxonMobil Chemical Company
  • Innovating a Sustainable Future for Nonwovens; A European Perspective
    given by Matthew Tipper, Ph.D., Operations Director, Nonwovens Innovation & Research Institute Ltd., (NIRI), UK
  • Filtration Media Functionalized with Zinc Oxide
    by Wai-shing Yung, Ph.D., Technical Director, Ascend Performance Materials
26.07.2021

WEKO has taken over RotaSpray GmbH

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Source:

Weitmann & Konrad GmbH & Co. KG

Alexander Hahn, CEO & Gründer Deutsche Lichtmiete AG mit dem Deutschen Award für Nachhaltigkeitsprojekte 2021. Alexander Hahn, CEO & Gründer Deutsche Lichtmiete AG mit dem Deutschen Award für Nachhaltigkeitsprojekte 2021. Quelle: Deutsche Lichtmiete
26.07.2021

Deutsche Lichtmiete gewinnt Award für Nachhaltigkeitsprojekte 2021

Die Deutsche Lichtmiete gewinnt mit ihrem Projekt „Beleuchtungsmodernisierung im LaaS Modell“ den Deutschen Award für Nachhaltigkeitsprojekte 2021 des DISQ Deutsches Institut für Service-Qualität in der Kategorie „Dienstleistung – Beratung“. Nach dem Wachstumschampion, Sustainability Heroes Award, Bundespreis Ecodesign und TOP Innovator 2021 ist das für den Marktführer für Light as a Service (LaaS) in Europa die fünfte Auszeichnung für sein nachhaltiges, erfolgreiches Geschäftsmodell innerhalb eines Jahres.
 

Die Deutsche Lichtmiete gewinnt mit ihrem Projekt „Beleuchtungsmodernisierung im LaaS Modell“ den Deutschen Award für Nachhaltigkeitsprojekte 2021 des DISQ Deutsches Institut für Service-Qualität in der Kategorie „Dienstleistung – Beratung“. Nach dem Wachstumschampion, Sustainability Heroes Award, Bundespreis Ecodesign und TOP Innovator 2021 ist das für den Marktführer für Light as a Service (LaaS) in Europa die fünfte Auszeichnung für sein nachhaltiges, erfolgreiches Geschäftsmodell innerhalb eines Jahres.
 
In ihrer Begründung bezeichnet die Jury das Projekt als Geschäftsmodell-Innovation, „der Zugang zu hocheffizienten Beleuchtungskonzepten wird erleichtert und professionell umgesetzt. Der Einsatz moderner LED-Technik ist ein großer Schritt Richtung CO2-Neutralität.“ Der Deutsche Award für Nachhaltigkeitsprojekte wurde erstmalig vom DISQ ausgelobt. In die Vorauswahl des DISQ gingen 125 Einreichungen aus 202 Nominierungen ein. Die hochkarätig besetzte Jury aus Wirtschaft, Wissenschaft und Medien um Schirmherrin und Bundesministerin a.D. Brigitte Zypris vergab insgesamt 49 Preise in 24 Kategorien. Ausgezeichnet wurden die besten Projekte in jeder Kategorie. Die Deutsche Lichtmiete ist Testsieger mit ihrem Projekt „Beleuchtungsmodernisierung im LaaS Modell“.
 
Der Fokus des Deutschen Awards für Nachhaltigkeitsprojekte liegt auf den 17 Zielen zur nachhaltigen Entwicklung der Vereinten Nationen (SDG – Sustainable Development Goals). Die Deutsche Lichtmiete ließ ihren Nachhaltigkeitsimpact 2020 nach dem imug Impact 360° Standard zertifizieren. Die unabhängige renommierte Nachhaltigkeits-Ratingagentur imug identifizierte einen „sehr starken Nachhaltigkeitsimpact“ und bestätigte der Deutschen Lichtmiete, „direkte und indirekte Beträge zu den UN-Nachhaltigkeitszielen“ zu leisten.

Source:

Deutsche Lichtmiete AG

23.07.2021

FET installs new Spunbond system at University of Leeds

Fibre Extrusion Technology Ltd, UK has completed the installation and commissioning of a new FET Laboratory Spunbond system for the University of Leeds.

Fibre Extrusion Technology Ltd, UK has completed the installation and commissioning of a new FET Laboratory Spunbond system for the University of Leeds.

This FET spunbond system is now an integral part of the research facilities of the CCTMIH (Clothworkers’ Centre for Textile Materials Innovation for Healthcare), led by Prof. Stephen Russell based in the School of Design, University of Leeds, who commented “The new spunbond system is perfectly suited to our academic research work, and is already proving itself to be extremely versatile and intuitive to use”.
 
This spunbond system complements existing research lab facilities at the university, which covers all areas of fibre and fabric processing, physical testing and characterisation. It forms part of a wider investment in facilities to support fundamental, academic research on ‘future manufacturing’ for medical devices, where the focus is on studying small-scale processing of unconventional polymers and additive mixes to form spunbond fabrics with multifunctional properties.
 
Key to this research is developing the underlying process-structure-performance relationships, based on the measured data, to provide detailed understanding of how final fabric performance can be controlled during processing.

As a rule, many exciting materials developed in academic research struggle to progress beyond the bench, because of compatibility issues with key manufacturing processes such as spunbond. By leveraging mono, core-sheath and island-in-the-sea bicomponent technology, the Leeds University team is working with polymer and biomaterial research scientists, engineers and clinicians to explore the incorporation of unusual materials in spunbond fabrics, potentially widening applications.
 
FET has built on its melt spinning expertise to develop a true laboratory scale spunbond system and is currently working on a number of other such projects globally with research institutions and manufacturers.

Source:

Fibre Extrusion Technology Ltd / Project Marketing Ltd

Azgard 9’s innovative fabric absorbs carbon dioxide while simultaneously producing oxygen. (c) Azgard 9
23.07.2021

Monforts customers at Première Vision Digital Denim Week

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Turkey’s Orta’s new Denim Route – inspired by the historical Silk Road for trade between the East and West – is an interactive supplier map detailing the regions from which it sources cotton, dyestuff, chemicals and various fibres to complement its other transparency initiatives.

Meanwhile, a living and breathing piece of clothing that absorbs carbon dioxide while simultaneously producing oxygen was introduced at Digital Denim Week 2021 by Azgard 9 (Pakistan) .

22.07.2021

ISKO joins the Ellen MacArthur Foundation’s Jeans Redesign project

ISKO, a global, leading premium denim ingredient brand, announced its participation in The Jeans Redesign – a project, established by the Ellen MacArthur Foundation’s Make Fashion Circular initiative, to encourage and guide the denim industry to transform the way jeans are made and move towards a circular economy for fashion.

ISKO meets the requirements for participation set by The Jeans Redesign guidelines and has made a commitment that 85% of its entire fabric production will consist of recycled material content made from pre-consumer and post-consumer recycled materials. This production will be independently verified by Textile Exchange audit bodies.

ISKO, a global, leading premium denim ingredient brand, announced its participation in The Jeans Redesign – a project, established by the Ellen MacArthur Foundation’s Make Fashion Circular initiative, to encourage and guide the denim industry to transform the way jeans are made and move towards a circular economy for fashion.

ISKO meets the requirements for participation set by The Jeans Redesign guidelines and has made a commitment that 85% of its entire fabric production will consist of recycled material content made from pre-consumer and post-consumer recycled materials. This production will be independently verified by Textile Exchange audit bodies.

This achievement is made possible using ISKO’s R-TWO™ technology which is created through a patented and exclusive yarn spinning technique that retains the unique properties and benefits found in ISKO’s statement fabrics. ISKO’s R-TWO™ is the embodiment of its Responsible Innovation™ mindset and aligns with the principles of a circular economy espoused by the Ellen MacArthur Foundation – to ensure durability, material health, recyclability and traceability. R-TWO™ positions ISKO as a sustainability leader and enables it to exceed the project guidelines to create denim that is designed to be used more, made to be made again and made from safe and recycled or renewable inputs.

More information:
Isko
Source:

menabo for ISKO