From the Sector

• Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
• In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

And finishings of the E.C.O. KOSMOS cross-collection, continuing its ethical and sustainable path and having also exclusives collaborations with international brands
Italian Converter, a leading manufacturer of innovative fabrics for fashion, footwear and accessories, expands E.C.O. Kosmos, the fully traceable, transparent and 100% Made in Italy cross-collection. The acronym E.C.O. - Ecologic, Conversion, Optimization perfectly reflects the founding values of the Italian Converter philosophy and represents a further step in the company's responsible path. E.C.O. Kosmos has also been selected to be part of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) and also welcomed with enthusiasm the proposal to support C.L.A.S.S. Smart Materials Bank, the educational platform and e-shop of C.L.A.S.S. designed for young designers who want to discover and experiment with innovative and sustainable textile solutions from the best manufacturers in ways suitable for their reality.

Here are some highlights of the collection:

• E.C.O. Alba – E.C.O. Aurora, fabrics made of 50% casual cotton combined with AMNI SOUL ECO ® technology.
• E.C.O. Sonica is a semi-shiny satin with an elegant and refined appearance. the textile sector at an international level.
• E.C.O. Aly is a vintage effect raffia, a very trendy theme right now.

To Accelerate Public-Private Cooperation in Supply Chain Transparency

Asia Pacific Rayon (APR) has joined the first neutral and public traceability platform capable of visualising blockchain-based supply chain data from multiple companies and sources. It aims to help businesses across industries respond to consumer demands for ethical and environmentally friendly products.
The neutral and safe space for collaboration is provided by the World Economic Forum and created in collaboration with Everledger, Lenzing Group, TextileGenesis™, and the International Trade Centre. APR will contribute to Phase 2 of the initiative which seeks to incorporate more data sources.

“APR has started harnessing the potential of enterprise blockchain technology to enable customers to trace finished products back to the plantation forest origins on a smartphone app. To be able now to connect our data to other similar industry initiatives is a natural next step for APR, as is extending the benefits of our upstream traceability to the rest of the textile value chain.

Enhancing Follow Our Fibre with New Mill Sustainability Dashboard

Launched in mid-2019, APR’s blockchain-based Follow Our Fibre allows customers and stakeholders to scan its viscose product with a user-friendly app to access data that traces the product’s journey from plant nursery to viscose manufacturing and on to seaports. In October 2019, APR announced a collaboration with TrusTrace to integrate Follow Our Fibre with the latter’s T-Trace module. This helps connect APR’s upstream data to downstream textile value chain actors such as yarn and fabric customers and fashion brands.

More recently, a sustainability dashboard tracking key mill environmental performance indicators has been added to Follow Our Fibre. The dashboard presents APR’s performance in its first year of operations where a baseline has been established for quarterly tracking, reporting and continuous improvement.
The performance indicators follow key industry standards being set by ZDHC for Man-Made Cellulosic Fibres (MMCF), as well as the European Union Best Available Technologies (EU BAT).

• Investment of approx. USD 1.3 bn in 500,000 t dissolving wood pulp plant
• Key milestone to structurally strengthen cost leadership position
• Significant step towards carbon neutrality

The Lenzing Group and Duratex announced that they will build a 500,000 t dissolving wood pulp plant in the State of Minas Gerais, near Sao Paulo (Brazil). The start-up is planned for the first half of 2022. In the joint venture, Lenzing holds a 51 percent, Duratex a 49 percent stake. The expected industrial CAPEX will be approx. USD 1.3 bn. The project is financed through long-term debt. The corresponding financing contracts are expected to be concluded at the end of the first quarter of 2020.

Key milestone to structurally strengthen cost leadership position
The new dissolving wood pulp plant strengthens the Lenzing Group’s backward integration and cost position as well as its specialty fiber growth in line with its sCore TEN corporate strategy. The single-line dissolving wood pulp plant with an annual nameplate capacity of 500,000 tons will be the largest and most competitive production facility of its kind. Dissolving wood pulp is a key raw material required for manufacturing Lenzing’s biobased fibers. The joint venture will supply the entire volume of dissolving wood pulp to the Lenzing Group.

“Wood-based cellulosic fibers offer an important contribution to enhance sustainability in the textile industry. In line with its corporate strategy sCore TEN, Lenzing is committed to drive organic growth in this market. With this investment, we will become more competitive, act more independently and subsequently strengthen our market position. The trust and support of the main shareholders of Lenzing and Duratex were of great importance for this key project”, states Stefan Doboczky, CEO of the Lenzing Group.

Strong focus on sustainability
In planning the new production facility, particular importance was given to sustainability aspects. The joint venture secured FSC®-certified plantations1 covering an area of over 44,000 hectares to provide the necessary biomass. These plantations operate completely in accordance with the guidelines and high standards of the Lenzing Group for sourcing wood and pulp. The plant will operate among the highest productive and energy-efficient in the world and will feed the 40 percent of excess bioelectricity generated on site as “green energy” into the public grid. With this project, Lenzing sets a milestone in its strategy to carbon neutrality.

SGL Carbon and Solvay collaborate to develop highly-competitive advanced carbon fiber composites for aerospace primary structures

SGL Carbon and Solvay have entered into a joint development agreement (JDA) to bring to market the first composite materials based on large-tow intermediate modulus (IM) carbon fiber. These materials, which address the need to reduce costs and CO2 emissions, and improve the production process and fuel efficiency of next-generation commercial aircraft, will be based on SGL Carbon’s large-tow IM carbon fiber and Solvay’s primary structure resin systems.

The agreement encompasses both thermoset and thermoplastic composite technologies. It builds on Solvay’s leadership in supplying advanced materials to the aerospace industry and SGL Carbon’s expertise in high-volume carbon fiber manufacturing.

“For Solvay, this is an opportunity to lead the aerospace adoption of a composite material based on 50K IM carbon fiber. This is a highly competitive value proposition that brings more affordable high-performance solutions to our customers. We see this as the first step in a long-term partnership,” said Augusto Di Donfrancesco, member of Solvay’s executive committee.

“By combining SGL’s carbon fiber expertise in our newly developed, unique 50K IM fiber with Solvay’s resin formulation and aerospace market expertise, both partners are aiming to develop an advanced aerospace material system. This alliance supports our strategic direction and accelerates our growth in the attractive aerospace market,” said Dr. Michael Majerus, spokesman of the management board of SGL Carbon.

Composite materials for aerospace applications represent a multi-billion-dollar market that is expected to grow strongly in the coming decade. Solvay and SGL Carbon are uniquely positioned to develop solutions to address the needs of this market.

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

Airborne’s focus is on high-end composite components, at high production rates at radically low conversion costs. Airborne is building up a suite of automated solutions for the manufacturing of composites with the aim to radically reduce costs and touch labour, minimize the footprint and use of material, and improve the time to market for their clients. The company offers i.a. solutions in automated honeycomb potting, automated kitting and automated lamination of thermosets and thermoplastics. In order to develop new business opportunities in the D-A-CH region for the end-markets aerospace and automotive, Airborne is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Dr. Effing, CEO of AMAC GmbH confirms: "As a first step for the establishment of Airborne on the German market, we just signed their membership at AZL in Aachen which will help to connect with over 80 companies and latest research developments. In the framework of theirstrategy to strengthen the supply to the aircraft sector, Airborne will also exhibit at the Aircraft Interiors Expo in Hamburg from March 31st to April 2nd 2020.”

Fortum, together with the sustainable fibre technology company Spinnova have today introduced the first prototype product born out of their joint development of using wheat straw in the production of highly sustainable textile fibre.

Fortum and Spinnova are showcasing the world’s first clothing made from agricultural waste, namely wheat straw, at the Textile Exchange Sustainability Conference in Vancouver, during 15-17 October. The showpieces include a knitted t-shirt, as well as a jacket and skirt made of a woven fabric on organic cotton warp.

The prototype material is unique also due to its extremely low environmental impact from raw material extraction, processing and manufacture, verified by life-cycle analysis (LCA).

“We are very excited to present this revolutionary textile. Today, wheat straw is mostly discarded or even burned in the fields. As it can now be used in numerous textile applications, this opens up huge possibilities globally. This cooperation is a tangible step towards Fortum’s strategy to build options for significant new businesses that improve resource efficiency and provide smart solutions for a cleaner world. We would like to invite more key industry players to join us in this journey,” says Heli Antila, VP, Biobased solutions at Fortum.

“We are all very proud of this amazing collaborative accomplishment! This was a very fast journey from the first trials to real, appealing fabric materials. This shows that wheat straw-based fibre is well on its way to being a drop-in product of the most sustainable kind,” says Spinnova’s CEO Janne Poranen.

• Growing demand for natural fabrics and blends driving Brodelec business growth

September 25th, 2019, Rosh Ha’ayn, Israel – Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that Orleans, France-based Brodelec has installed the country’s first-ever Kornit Presto S system for roll-to-roll, pigment-based digital textile printing.

This installation will enable the multiservice marking brand to expand their business further into customized décor and on-demand fashion.

Brodelec has partnered with Kornit for over a decade and owns several direct-to-garment print systems. Based on demand for natural fabrics and blends in the home décor and fashion markets, they are now expanding their offerings to include bespoke direct-to-fabric services.

Brodelec chose the Kornit Presto S as it is the only single-step solution and therefore the fastest route from design to finished product, making it the most efficient and eco-friendly fabric printing solution in France today.

• Interfilière Paris, 6th-8th July 2019, booth D60

Able to offer an alchemy of design and sustainable innovation, Iluna Group with ROICA™ by Asahi Kasei join the latest edition of the Parisian tradeshow for lingerie with a range of innovations capable of combining innovation, aesthetics and quality. "Ethical" lace and stockings, where quality standards go hand in hand with fashion content, respecting both the environment and humans, an offer already selected among the protagonists of the Sustainable Thinking Exhibition of the Salvatore Ferragamo Museum, for its value in the field of responsible innovation.

Experts in the production of stretch lace since 1985, ILUNA today represents the largest European laces’producer. Thanks to the effectiveness of their responsible innovation strategy, Iluna Group has been the very first lace producer to have gained the GRS (Global Recycled Standard) for their transformed products, together with the company certification STeP (Sustainable Textile Production by Oeko –Tex®).
A relevant achievement for the firm that, thanks to the Green Label collection, now even richer, make responsible innovation an asset for production that focuses on smart ingredients as ROICA Eco-Smart™ family and Q-Nova® by Fulgar.

A range that culminates today in the launch of an athleisure and sporty-chic capsule collection that perfectly fit the contemporary modern wardrobe, result of a qualified and totally traceable supply chain, from yarn up to garment, based on design, sustainability and performance.

Of major interest is the fact that the Iluna fashion R&D based its strategic choice for the AI2020/2021 on the extension of the offer with new Black label’s developments between lace and embroidery, the premium R&D line.

The range of new Ultralight multicolor laces offers jacquardtronic and textronic 4 or 5 colours galloons with a 3D effect. The change of the color of thread in the background as well as in the design gives life to unique coordinated solutions for creatives. The match between expectations of brands and retailers are met always keeping as a priority the contemporary design, that is integrated to unique strategy committed to responsibility both at corporate and product level.

To ILUNA smart innovation is not just a project, its space at Interfilière where visitors will have the chance to discover the new collection and above all to experience and touch latest boundaries of lace smart innovations pursued staying true to the values the brand. Iluna team is pleased to welcome you with a special cadeaux created in collaboration with ROICA™ by Asahi Kasei.

PREMIUM GROUP announces a strategic partnership with JOOR – the world’s largest wholesale platform based in the US.

The organiser of the PREMIUM and SEEK trade shows as well as the #FASHIONTECH BERLIN conference had been looking for a strong digital platform and a partner to facilitate the step into the US market for its exhibitors for quite some time.

“With JOOR we have now found the perfect match and digital complement to support our network in entering the US market and growing sales,” explains Jörg Arntz, Managing Director of the PREMIUM GROUP. “Both our companies share the philosophy of being more impactful in joining forces and thinking beyond the boundaries. Strong networks, both online and offline, have never been as crucial as in these times of serious market transformation.”