From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
2257 results
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery (c) Oerlikon Neumag
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery
20.03.2020

Oerlikon Neumag: RoTac³ tangling unit with comprehensive modifications

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac3. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac3 in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

More information:
Oerlikon Neumag Manmade Fibers segment
Source:

Oerlikon Neumag 

print close
more
Lenzing Logo (c) Lenzing
Lenzing Logo
20.03.2020

Lenzing Group’s Sustainability Report for 2019 published

  • First fiber producer to have an approved science-based target – CO2 neutrality by 2050
  • Breakthrough in REFIBRA™ technology – worn textiles can also be used as fiber raw material
  • Pioneer in the introduction of blockchain technology for fiber recognition
  • On track to meet all sustainability targets

Lenzing – Just ahead of the “Day of Forests ” on March 21, which the FAO (Food and Agricultural Organization of the United Nations) introduced in the 1970s in response to global deforestation, the Lenzing Group presents its Sustainability Report 2019. This sets out how the company is actively dealing with the global challenges.

Lenzing produces fibers from the renewable raw material wood and is well known among its customers and partners in the global textile and nonwoven fabric industry for the clear position it takes as a sustainable producer. It is no accident that the new report is appearing on the International Day of Forests. Lenzing’s sustainable practices in procurement, especially for wood and pulp, were once again ranked as leading in the 2019 reporting year (Hot Button Report).

  • First fiber producer to have an approved science-based target – CO2 neutrality by 2050
  • Breakthrough in REFIBRA™ technology – worn textiles can also be used as fiber raw material
  • Pioneer in the introduction of blockchain technology for fiber recognition
  • On track to meet all sustainability targets

Lenzing – Just ahead of the “Day of Forests ” on March 21, which the FAO (Food and Agricultural Organization of the United Nations) introduced in the 1970s in response to global deforestation, the Lenzing Group presents its Sustainability Report 2019. This sets out how the company is actively dealing with the global challenges.

Lenzing produces fibers from the renewable raw material wood and is well known among its customers and partners in the global textile and nonwoven fabric industry for the clear position it takes as a sustainable producer. It is no accident that the new report is appearing on the International Day of Forests. Lenzing’s sustainable practices in procurement, especially for wood and pulp, were once again ranked as leading in the 2019 reporting year (Hot Button Report).

“Stand up! A gainst business as usual ”

Under the motto “Stand up! Against business as usual ”, Lenzing emphasizes its wider responsibilities over and above its products. Business - as - usual scenarios have to be overcome, in particular for climate protection. With a science-based target, Lenzing is taking action to master the problems caused by climate change. The Lenzing Group is committed to reducing its greenhouse gas emissions per ton of product by 50 percent by 2030 (baseline: 2017). The Science-Based Target s initiative has approved Lenzing’s climate target as science-based.

Breakthrough in REFIBRA™ technology

One of Lenzing’s strategic principles under its “Naturally positive” sustainability strategy and a focus in the 2019 Sustainability Report is the circular economy. To address the enormous textile waste challenges of industry and society, Lenzing has developed a unique recycling technology branded REFIBRA™. This technology enables garment production waste to be reprocessed into fibers. 

 

 

More information:
Lenzing
Source:

Lenzing

print close
more
A modern hydroponic herb growing facility. (c) AWOL
A modern hydroponic herb growing facility.
20.03.2020

Salad days for the UK’s Anglo Recycling

Anglo Recycling Technology is on course to deliver no less than a million of its special nonwoven mats for hydroponically growing herbs to a major customer in the Middle East this year. The Growfelt-branded products arose from the discovery back in the late 1990s by Anglo Recycling’s owner Simon Macaulay, that the Sussex-based retail supplier of salads, Van Heineken Brothers (now Vitacress), used nonwoven felts on which to grow its cress.

“I drove down to see the company’s production manager, Chris Moncrieff and discovered they were indeed growing cress on felts, but they were made from virgin materials and he liked the idea of maybe using a blend of virgin fiber offcuts of cotton, wool, and polypropylene,” he explains. “That’s how Growfelt was born. For the first six years, we supplied exclusively to Vitacress and in return, they helped us to bring our factory up to food-grade standard and to set in place a testing regime for Salmonella E-Coli coliforms and listeria.”

Anglo Recycling Technology is on course to deliver no less than a million of its special nonwoven mats for hydroponically growing herbs to a major customer in the Middle East this year. The Growfelt-branded products arose from the discovery back in the late 1990s by Anglo Recycling’s owner Simon Macaulay, that the Sussex-based retail supplier of salads, Van Heineken Brothers (now Vitacress), used nonwoven felts on which to grow its cress.

“I drove down to see the company’s production manager, Chris Moncrieff and discovered they were indeed growing cress on felts, but they were made from virgin materials and he liked the idea of maybe using a blend of virgin fiber offcuts of cotton, wool, and polypropylene,” he explains. “That’s how Growfelt was born. For the first six years, we supplied exclusively to Vitacress and in return, they helped us to bring our factory up to food-grade standard and to set in place a testing regime for Salmonella E-Coli coliforms and listeria.”

In recent years, however, Anglo Recycling, which is based in Whitworth, near Rochdale in the UK, has significantly broadened its customer base. It now offers a core of three growing media products to meet the differing needs of customers across Europe, the Middle East, and the Far East, whether for retail presentation and appearance or for water holding.

 

Anglo Recycling Technology Ltd., Tong Lane, Whitworth, Rochdale, Lancashire, OL128BG (c) AWOL
More information:
Anglo Recycling Technology
Source:

AWOL

print close
more
Yarn (c) Sateri
Yarn
18.03.2020

Sateri Achieves Breakthrough in Commercial Production of Viscose Using Recycled Textile Waste

Forging Ahead with Circular Bioeconomy

Sateri, the world ’ s largest producer of viscose, has successfully produced on commercial scale viscose fiber regenerated from textile waste. The high-quality new fiber uses a mix of dissolving pulp made from recycled post-consumer textile waste by Swedish company Södra, and other PEFC - certified wood pulp.

Trialed at Sateri ’ s Linz Nanjng yarn spinning mill using two advanced technologies, Siro compact and Vortex, the new fiber has proven compatibility with existing spinning technologies, ensuring stable yarn production without the need to adjust existing processes or parameters. The fiber also has excellent spinning efficiency and delivers yarn evenness and tenacity.

Forging Ahead with Circular Bioeconomy

Sateri, the world ’ s largest producer of viscose, has successfully produced on commercial scale viscose fiber regenerated from textile waste. The high-quality new fiber uses a mix of dissolving pulp made from recycled post-consumer textile waste by Swedish company Södra, and other PEFC - certified wood pulp.

Trialed at Sateri ’ s Linz Nanjng yarn spinning mill using two advanced technologies, Siro compact and Vortex, the new fiber has proven compatibility with existing spinning technologies, ensuring stable yarn production without the need to adjust existing processes or parameters. The fiber also has excellent spinning efficiency and delivers yarn evenness and tenacity.

Sateri ’ s breakthrough comes on the back of RGE’s announcement in October last year of a USD200 million investment towards next-generation cellulosic fiber innovation. Sateri is working with several dissolving pulp producers using various innovative technologies to aid the push towards a circular bio-economy. Sateri will be partnering yarn customers, garment manufacturer s and fashion brands to market and officially launch this new recycled viscose fiber product in the coming months, with the eventual goal of making recycled fiber available to the mass market.

(c) Sateri
More information:
Sateri
Source:

Sateri

print close
more
From left: Carlo Centonze, Dr. Thierry Pelet holding the first prototype of HeiQ Viroblock NPJ03 treated face masks (c) HeiQ
From left: Carlo Centonze, Dr. Thierry Pelet holding the first prototype of HeiQ Viroblock NPJ03 treated face masks
17.03.2020

HeiQ Viroblock NPJ03 antiviral textile technology tested effective against Coronavirus

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ Viroblock NPJ03 is a unique combination of vesicle and silver technologies designed to inhibit the growth and persistence of bacteria and viruses. The HeiQ vesicle technology targets lipid- enveloped viruses, such as coronavirus, providing rapid virus deactivation, while the HeiQ silver technology inhibits the replication of both bacteria and viruses. HeiQ Viroblock NPJ03 can be applied to a wide spectrum of textile surfaces including face masks, air filters, medical gowns, curtains, drapes and more. HeiQ also has a range of highly wash-durable antimicrobial and odor control textile technologies, called HeiQ Pure, combining silver-based and bio-based materials for all fabric types.

More information:
HeiQ Coronavirus
Source:

HeiQ

print close
more
Oerlikon logo (c) Oerlikon
Oerlikon logo
17.03.2020

Oerlikon wins three large manmade fibers orders in China

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.


 

More information:
Oerlikon Manmade Fibers Manmade Fibers segment
Source:

Oerlikon

print close
more
Domo logo (c) Domo
Domo logo
article as PDF
14.03.2020

DOMO Chemicals to invest €12 million in new nylon plant in China

  • Move is in line with global growth strategy with a strong focus in the Asia Pacific region
  • Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
  • Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

  • Move is in line with global growth strategy with a strong focus in the Asia Pacific region
  • Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
  • Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

DOMO Chemicals will invest €12 million in the new plant, which will have more than 11,500 m 2-floor space. The company plans to install multiple production lines at the first stage of development, which would offer an estimated capacity of 25,000 tons/year. There will be enough additional space available to cope with future demand requirements. The move is in line with the company’s global growth strategy with a strong focus on the Asia Pacific (APAC) region.

Source:

Domo 

print close
more
12.03.2020

Kelheim Fibres achieves low risk in first CanopyStyle Audit

Today, environmental not-for-profit organization Canopy, third-party auditor NEPCon, and Kelheim Fibres released the results of Kelheim’s CanopyStyle Audit. The company’s current supply chain is confirmed as low risk of sourcing wood from Ancient and Endangered Forests or other controversial sources.

Key findings of the audit include:

  • The company is at low risk of sourcing from Ancient and Endangered Forests;
  • The company has a limited fibre basket and uses a significant proportion of FSC-certified fibres in its viscose products; and
  • The company has begun supporting forest conservation solutions in key areas of Ancient and Endangered Forests.

In the spirit of continuous improvement, Canopy recommends that the company increase the proportion of FSC-certified fibre, and make efforts to source 100% FSC, as well as continue to invest in research and development of low-impact alternative fibres, with the goal of launching a fibre line that contain these products.

Today, environmental not-for-profit organization Canopy, third-party auditor NEPCon, and Kelheim Fibres released the results of Kelheim’s CanopyStyle Audit. The company’s current supply chain is confirmed as low risk of sourcing wood from Ancient and Endangered Forests or other controversial sources.

Key findings of the audit include:

  • The company is at low risk of sourcing from Ancient and Endangered Forests;
  • The company has a limited fibre basket and uses a significant proportion of FSC-certified fibres in its viscose products; and
  • The company has begun supporting forest conservation solutions in key areas of Ancient and Endangered Forests.

In the spirit of continuous improvement, Canopy recommends that the company increase the proportion of FSC-certified fibre, and make efforts to source 100% FSC, as well as continue to invest in research and development of low-impact alternative fibres, with the goal of launching a fibre line that contain these products.

This audit, which reflects a snapshot in time, is to be conducted annually to ensure that the company continues to meet the expectations of the CanopyStyle initiative. The audit findings contribute to Hot Button Issue Report.

The public report from Kelheim Fibre’s audit evaluations is available for download here: www.kelheim-fibres.com/en/sustainability/certificates/

More information:
Kelheim Fibres Canopy Nepcon
Source:

Kelheim Fibres GmbH

print close
more
12.03.2020

Consultation Process at the Winterthur Location Completed

  • Discontinuation of assembly at the Winterthur location confirmed
  • Reduction of 87 jobs
  • Comprehensive social plan in place

On January 29, 2020, Rieter announced its intention to discontinue the assembly of machines at the Winterthur location due to structural changes in the market situation. The consultation process with employee representatives was completed March 11, 2020. After intensive discussion and detailed examination of the submitted proposals, the discontinuation of assembly and the associated reduction of 87 jobs was confirmed.

The final position was communicated to the employee representatives and the Office for Economy and Labor of the Canton of Zurich. Rieter’s employees were informed of the result. The decision will be implemented gradually during 2020.

Rieter has a comprehensive social plan. The focus is on the reintegration of affected employees with the support of the Regional Employment Centre (RAV) as well as a job center and the avoidance of hardship cases. The company intends to reduce the headcount by means of workforce turnover and early retirement, however some layoffs will be unavoidable.

  • Discontinuation of assembly at the Winterthur location confirmed
  • Reduction of 87 jobs
  • Comprehensive social plan in place

On January 29, 2020, Rieter announced its intention to discontinue the assembly of machines at the Winterthur location due to structural changes in the market situation. The consultation process with employee representatives was completed March 11, 2020. After intensive discussion and detailed examination of the submitted proposals, the discontinuation of assembly and the associated reduction of 87 jobs was confirmed.

The final position was communicated to the employee representatives and the Office for Economy and Labor of the Canton of Zurich. Rieter’s employees were informed of the result. The decision will be implemented gradually during 2020.

Rieter has a comprehensive social plan. The focus is on the reintegration of affected employees with the support of the Regional Employment Centre (RAV) as well as a job center and the avoidance of hardship cases. The company intends to reduce the headcount by means of workforce turnover and early retirement, however some layoffs will be unavoidable.

More information:
Rieter Rieter Holding Ltd.
Source:

Rieter Management AG

print close
more
(c) ISKO
article as PDF
12.03.2020

ISKO shared R-TWOTM, its 100% responsible platform, at Drapers Sustainable Fashion Forum

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.

More information:
Isko Drapers Sustainable Fashion Forum
Source:

ISKO

print close
more
NCTO (c) NCTO
12.03.2020

NCTO Supports Administration’s Proposals on Economic Stimulus in Coronavirus Response

Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak, but the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

As part of a Phase One deal with China, the administration reduced duties on finished apparel and textile products implemented on Sept.1 from 15 percent to 7.5 percent. Finished apparel, home furnishings and other made-up textile goods equate to 93.5 percent of U.S. imports from China in the sector; while fiber, yarn, and fabric imports from China only represent 6.5 percent, according to government data.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.

Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak, but the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

As part of a Phase One deal with China, the administration reduced duties on finished apparel and textile products implemented on Sept.1 from 15 percent to 7.5 percent. Finished apparel, home furnishings and other made-up textile goods equate to 93.5 percent of U.S. imports from China in the sector; while fiber, yarn, and fabric imports from China only represent 6.5 percent, according to government data.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.

  • U.S. employment in the textile supply chain was 594,147 in 2018.

  • The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.

  • U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.

  • Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

 

More information:
NCTO
Source:

NCTO

print close
more
perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag (c) Oerlikkon
perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag
article as PDF
12.03.2020

perPETual and Polygenta manufacture using Oerlikon's WINGS

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

As one of the world’s first companies, Polygenta has, since 2014, been producing 100% recycled POY and DTY from post-consumer PET using the patented chemical recycling process developed by perPETual Global Technologies. perPETual’s process reduces CO2 impact by more than 66% compared to virgin PET. The yarn is spun using Oerlikon Barmag systems and equipment. As a result, Polygenta is able to produce a wide range of DTY and FDY yarns that comply with the Global Recycled Standard (GRS).

More information:
Oerlikon
Source:

Oerlikon

print close
more
SGL Carbon: fiscal year 2019 (c) SGL Carbon
SGL Carbon: fiscal year 2019
article as PDF
12.03.2020

SGL Carbon: fiscal year 2019

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

  • Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
  • Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
  • Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
  • Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
  • Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
  • Free cash flow significantly improved
  • Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
  • SGL Carbon confirms guidance for fiscal

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

  • Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
  • Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
  • Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
  • Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
  • Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
  • Free cash flow significantly improved
  • Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
  • SGL Carbon confirms guidance for fiscal year 2020: sales expected slightly below previous year; recurring EBIT approximately 10 to 15 percent below previous year level
  • Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “The financial development of the fiscal year 2019 conceals the fact that our strategic orientation is correct. This is evident from our growth and the increasing number of contracts and projects we acquired in our strategic core markets. Main drivers are the topics of sustainable mobility and energy as well as digitization. Therefore, we expect that we can grow our consolidated revenue by a mid to high single-digit percentage per year on average between 2020 and 2024.“

The fiscal year 2019 developed very differently in the two business units of SGL Carbon. The record results in the graphite specialities business could not fully compensate for the weak development in the market segments Wind Energy, Textile Fibers and Industrial Applications in the carbon fiber business. Group sales grew by 4 percent to 1.1 billion euros. Recurring Group EBIT declined by 25 percent to 48 million euros. Due to the ongoing weakness in the market segments Textile Fibers and Industrial Applications the business unit CFM recorded a non-cash impairment loss of 75 million euros in the third quarter of 2019. With minus 90 (prior year: plus 41) million euros, consolidated Group result declined significantly compared to last year’s good results. The Group confirms its guidance for 2020 published in October 2019.

Group sales are expected to decline slightly compared to the prior-year level, whereas Group recurring EBIT is expected to reach a result around 10 to 15 percent below the prior-year level. Consolidated net result of the Group in 2020 should strongly improve compared to prior-year level to a low double-digit loss.

More information:
SGL Carbon
Source:

SGL Carbon

print close
more
ISKO logo
ISKOs shared its R-TWO Platform
11.03.2020

ISKO shared R-TWO™ at Drapers Sustainable Fashion Forum

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.
As evidence of its Responsible Innovation™ approach, ISKO presented the R-TWO™ program, its latest
responsible achievement. Stemming from the mill’s holistic vision, R-TWO™ represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its  environmental performance.
The R-TWO™ reduces the amount of raw material sourced by using a blend of reused cotton and recycled polyester – both certified –, improving sourcing efficiency throughout the entire field-to-fabric production.
Reused cotton is certified with the Content Claim Standard – or CCS – from the Textile Exchange. As for recycled polyester, it can be either Recycled Claim Standard (RCS) or Global Recycled Standard (GRS) certified, depending on the content percentages. Together with this cutting-edge and fully responsible program, ISKO also uses automated laser
technology developed in partnership with Jeanologia.

“How technology can help make the fashion industry more sustainable”:
On March 11th, ISKO hosted a discussion about ways, to make the fashion industry more responsible
The panel was moderated by David Shah, consultant on design and marketing development, Publisher and CEO at Metropolitan Publishing BV and Associate Professor at ARTez (Arnhem, the Netherlands) and Associate Professor at Renmin University, (Beijing, China). The talk involved Keith O’Brien, ISKO Marketing & Business Development Manager, Victoria Soto, Jeanologia Custom Technology Consultant and Filippo Ricci, Fashion Open Studio Program & Partnership Manager.

 

More information:
Isko digital platform Sustainability Recycling
Source:

Menabò Group, Global Press and PR Support

print close
more
TERASIL® BLUE W DYE (C) Huntsman Corporation
11.03.2020

HUNTSMAN TEXTILE EFFECTS introduces TERASIL® BLUE W DYE

  • Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

  • Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products.

More information:
Huntsman Huntsman Textile Effects
Source:

Huntsman Corporation

print close
more
TERASIL BLUE W (c) HUNTSMAN
TERASIL BLUE W
11.03.2020

HUNTSMAN TEXTILE EFFECTS INTRODUCES TERASIL® BLUE W DYE

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

With cutting-edge disperse dye technology at its heart, TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products(1).

More information:
Huntsman Textile Effects
Source:

HUNTSMAN

print close
more
NCTO (c) NCTO
11.03.2020

NCTO Responds to China Commission’s Report on Forced Labor in China to Produce Global Products

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued the following statement today in response to the Congressional-Executive Commission on China’s staff report on the forced labor of Uyghurs and other minorities in China to produce consumer products for global companies.

We share the concerns of the bipartisan China commission regarding forced labor in China that is used to produce goods for global companies. We agree with the findings and the commission’s recommendations to the administration and Congress to take action against the systemic abuse of forced labor.

As the commission’s report details, Chinese apparel exporters have clearly profited from the virtual enslavement of this minority population, and we call for continued scrutiny and the end to this exploitation of a repressed people. The commission has served a fair warning to U.S. businesses and consumers to not be complicit in these forced labor practices.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued the following statement today in response to the Congressional-Executive Commission on China’s staff report on the forced labor of Uyghurs and other minorities in China to produce consumer products for global companies.

We share the concerns of the bipartisan China commission regarding forced labor in China that is used to produce goods for global companies. We agree with the findings and the commission’s recommendations to the administration and Congress to take action against the systemic abuse of forced labor.

As the commission’s report details, Chinese apparel exporters have clearly profited from the virtual enslavement of this minority population, and we call for continued scrutiny and the end to this exploitation of a repressed people. The commission has served a fair warning to U.S. businesses and consumers to not be complicit in these forced labor practices.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

  • U.S. employment in the textile supply chain was 594,147 in 2018. 
  • The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018. 
  • U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018. 
  • Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available
More information:
NCTO
Source:

NCTO

print close
more
Rieter: Financial Year 2019 (c) Rieter
Rieter: Financial Year 2019
article as PDF
10.03.2020

Rieter: Financial Year 2019

  • Order intake up 7% on previous year; orders amounting to CHF 401.6 million booked in fourth-quarter 2019 (4th quarter 2018: CHF 119.0 million)
  • As expected, sales significantly down on previous year, falling by 29% to CHF 760 million
  • EBIT margin of 11 .2% and net profit of 6.9% of sales, non - recurring profit contribution from sale of real estate in Ingolstadt (Germany)
  • Proposed dividend of CHF 4. 5 0 per share

In financial year 2019, Rieter recorded an order intake of CHF 926.1 million, which was 7% up on the prior-year period (2018: CHF 868.8 million). This development is attributable to a strong fourth quarter, in which Rieter booked orders totaling CHF 401.6 million (4th quarter 2018: CHF 119.0 million). At the end of 2019, the company had an order backlog of about CHF 500 million (December 31, 2018: about CHF 325 million).

In 2019, Rieter Group sales amounted to CHF 760.0 million (2018: CHF 1 075.2 million), which corresponds to a decrease of 29% compared to the previous year.

  • Order intake up 7% on previous year; orders amounting to CHF 401.6 million booked in fourth-quarter 2019 (4th quarter 2018: CHF 119.0 million)
  • As expected, sales significantly down on previous year, falling by 29% to CHF 760 million
  • EBIT margin of 11 .2% and net profit of 6.9% of sales, non - recurring profit contribution from sale of real estate in Ingolstadt (Germany)
  • Proposed dividend of CHF 4. 5 0 per share

In financial year 2019, Rieter recorded an order intake of CHF 926.1 million, which was 7% up on the prior-year period (2018: CHF 868.8 million). This development is attributable to a strong fourth quarter, in which Rieter booked orders totaling CHF 401.6 million (4th quarter 2018: CHF 119.0 million). At the end of 2019, the company had an order backlog of about CHF 500 million (December 31, 2018: about CHF 325 million).

In 2019, Rieter Group sales amounted to CHF 760.0 million (2018: CHF 1 075.2 million), which corresponds to a decrease of 29% compared to the previous year.

EBIT Margin, Net Profit and Free Cash Flow

Rieter generated an EBIT margin of 11.2% or CHF 84.9 million (2018: 4.0% or CHF 43.2 million). This includes the non - recurring profit from the sale of real estate in Ingolstadt in the amount of CHF 94.5 million. As a result of the capacity adjustment and cost reduction measures, the number of employees decreased by 11% to 4 591 (December 31, 2018: 5 134).

Net profit rose to CHF 52.4 million (6.9% of sales) and thus was significantly higher than in the previous year (2018: CHF 32.0 million or 3.0% of sales). The contribution from the sale of real estate in Ingolstadt had an impact of CHF 67.2 million (EUR 61.6 million) at the net profit level. Free cash flow in 2019 was CHF 42.3 million (2018: CHF 63.6 million). Net liquidity rose to CHF 162.1 million (December 31, 2018: CHF 150.2 million ). The equity ratio as of December 31, 2019, was 47.8% (prior-year balance sheet date: 44.6%).

More information:
Rieter
Source:

Rieter

print close
more
Logo monforts
Logo monforts
09.03.2020

Monforts ATC adventures in aquaculture

Monforts has recently been involved in a number of R&D trials aimed at improving the performance of the fishing cage nets employed in fish farming operations at its Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

The cultivation of both freshwater and saltwater fish populations under controlled conditions is a global industry valued at around $200 billion annually and only made possible with the use of huge aquaculture nets.

Monforts has recently been involved in a number of R&D trials aimed at improving the performance of the fishing cage nets employed in fish farming operations at its Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

The cultivation of both freshwater and saltwater fish populations under controlled conditions is a global industry valued at around $200 billion annually and only made possible with the use of huge aquaculture nets.

Biofouling
“These nets are very prone to biofouling and to avoid its negative impacts, high-pressure robotic jets are now used to clean them,” explains Monforts Head of Technical Textiles Jürgen Hanel. “Net cleaning is expensive and can also damage current antifouling coatings on the nets, causing contamination as well as fish health and welfare risks.
The development of more effective antifouling coatings for fishing cage nets has been one aspect of R&D work at the Monforts ATC, while the use of how alternative fibres could potentially be coated or finished to replace the polyamide which is currently most widely used has also been explored.
The issue of plastics and synthetic fibres in the oceans has generated global media attention recently, and the aquaculture industry is exploring all avenues that will lead to more sustainable practices.

Expansions
Since its opening in 2013, over €3 million has been invested in equipment at the Monforts ATC, which over an area of 1,200 square metres houses two full finishing lines, engineered to accommodate an extremely diverse range of processes, in addition to a Thermex range for the continuous dyeing of denim.

More information:
fishing nets Monforts water pollution
Source:

AWOL Media

print close
more
Gilberto Calzolari look with Eco Fisset1 (c) GB Network
Gilberto Calzolari look with Eco Fisset1
04.03.2020

Italian Converter presents new materials

And finishings of the E.C.O. KOSMOS cross-collection, continuing its ethical and sustainable path and having also exclusives collaborations with international brands
Italian Converter, a leading manufacturer of innovative fabrics for fashion, footwear and accessories, expands E.C.O. Kosmos, the fully traceable, transparent and 100% Made in Italy cross-collection. The acronym E.C.O. - Ecologic, Conversion, Optimization perfectly reflects the founding values of the Italian Converter philosophy and represents a further step in the company's responsible path. E.C.O. Kosmos has also been selected to be part of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) and also welcomed with enthusiasm the proposal to support C.L.A.S.S. Smart Materials Bank, the educational platform and e-shop of C.L.A.S.S. designed for young designers who want to discover and experiment with innovative and sustainable textile solutions from the best manufacturers in ways suitable for their reality.

Here are some highlights of the collection:

And finishings of the E.C.O. KOSMOS cross-collection, continuing its ethical and sustainable path and having also exclusives collaborations with international brands
Italian Converter, a leading manufacturer of innovative fabrics for fashion, footwear and accessories, expands E.C.O. Kosmos, the fully traceable, transparent and 100% Made in Italy cross-collection. The acronym E.C.O. - Ecologic, Conversion, Optimization perfectly reflects the founding values of the Italian Converter philosophy and represents a further step in the company's responsible path. E.C.O. Kosmos has also been selected to be part of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) and also welcomed with enthusiasm the proposal to support C.L.A.S.S. Smart Materials Bank, the educational platform and e-shop of C.L.A.S.S. designed for young designers who want to discover and experiment with innovative and sustainable textile solutions from the best manufacturers in ways suitable for their reality.

Here are some highlights of the collection:

  • E.C.O. Alba – E.C.O. Aurora, fabrics made of 50% casual cotton combined with AMNI SOUL ECO ® technology.
  • E.C.O. Sonica is a semi-shiny satin with an elegant and refined appearance. the textile sector at an international level.
  • E.C.O. Aly is a vintage effect raffia, a very trendy theme right now.

 

E.C.O. FISSET (c) GB Network
More information:
Italian Converter
Source:

GB Network

print close
more