From the Sector

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac³. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac³ in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

Today’s consumers demand versatility in their apparel, whether they’re shopping for work, sports or leisure wear. Work wear is no longer just about style, and sports and leisure wear is no longer just about stretch, while the demands for high-performance textiles in every category continue to increase. More and more consumer brands are looking to Schoeller’s established technologies to deliver not only beautiful fabrics that offer comfort and style but also breathability and the best in water and dirt repellence to their customers.

3XDRY® finishing technology from schoeller® allows the exterior of a textile to be water repellent, while the inside absorbs moisture and quickly distributes it over the surface. As a result, textiles with 3XDRY® dry much faster in comparison to conventional textiles. Since the launch of 3XDRY® in 2001, the technology has proven performance focused mostly on sportswear. Now that demands within the fashion industry are also trending toward performance textiles, more of its apparel brands are also turning to the patented 3XDRY® technology’s reliability and versatility for functional jackets, pants and shirts.

Intertextile Shanghai Home Textiles – Autumn Edition will return from 24 – 26 August 2020 at the National Exhibition and Convention Center (Shanghai), organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). Stepping into its 26th edition, the trade fair will provide exhibitors the perfect opportunity to introduce new products and expand their distribution networks, as well as serving as a source of information and inspiration for professionals in every aspect of the industry.
 
Celebrating its 25th anniversary last August, the Autumn Edition of Intertextile attracted 1,147 exhibitors from 27 countries & regions, as well as 35,390 trade buyers from 117 countries & regions (2018: 104), reflecting the increasing internationalism of Messe Frankfurt’s textile fairs in China, and the growing opportunities for international suppliers to meet a wide range of buyers in Shanghai. The trade fair’s capacity to attract large and diverse crowds has reinforced its status as the leading business platform for the home textile industry in the Asia Pacific region.
 
In the next edition, a large collection of quality Chinese companies, as well as premier overseas brands will once again present the entire spectrum of home and contract textile products including:

• Textile editors
• Whole Home Products
• Windows & Upholstery
• Bedding, Bath, Kitchen & Table
• Carpets & Rugs
• Sun-Protection
• Wallcovering
• Digital Print & Technics
• Fibers, Yarns & Chemicals
• Textile Designs

Opportunities abound in China’s home textiles market
 
“The upcoming Autumn Edition of Intertextile is set to offer suppliers and buyers the best platform to capture new business opportunities, especially as we continue to focus on bringing together more key players from the textiles, interiors, architecture and hospitality sectors in China and internationally,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.
 
“Over the years, Intertextile has been evolving from a traditional trade fair to an immersive and interactive experience that inspires and engages attendees. Today, the fair is more than a business platform; it also delivers state-of-the-art home trends, valuable networking opportunities, as well as innovative and strategic solutions for brand development through a series of fringe programme events,” Ms Wen further explained.
 
As one of the selected exhibitors featured in the Talks & Tours series at the 2019 fair, Mr Thomas Luys, Sales Manager of LIBECO-LAGAE: “We had quite a diverse range of visitors, including an increase in e-commerce buyers, but also more traditional upholstery fabrics buyers. Our booth was also part of the Talks & Tours, so it was important to tell our story to a diverse range of visitors on this tour.”
 
 
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

• Bangladesh’s biggest denim expo takes place 5-6 November
• The show runs concurrently with the Sustainable Apparel Forum Bangladesh
• From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

• For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”
 

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

“The spray cassettes are a key part in the Dye-Max line,” explains Imogo’s founding partner Per Stenflo. “There is one set of spray cassettes for each of the three separate dye dispersion feed lines and they can be easily exchanged without the need for tools in less than a minute. This allows for extremely fast changeovers between different colours without the need for cleaning. And because the spray cassettes are removable, all maintenance can be performed off line. 
After applying the dye dispersion the fabric is rolled onto a shaft and moved to the autoclave for deep dye fixation via heat and pressure.”

The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric Stenflo adds. 

“At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation.”

The Dye-Max has a working speed of up to 50m/min with the practical speed determined by the fabric weight and application volume. 
 

Anita Tillmann on the new season, new topics and a new generation.

“We’re feeling a special vibe in Berlin at the moment. The new generation is cool, fresh, engaged. Despite the fact that we, in our 40s, 50s and up, wear the same sneakers and almost the same look as our children, it's a long time since we topped the cool list. We need the young crowd, these stars of tomorrow, their style, their ideas and their unconventional and open ways of thinking. Everyone should come to Berlin to meet them, listen to them, or at least watch them. If you only look to the past you won't create a good future.”

CRAFTING STORIES.
“Berlin feels reckless, flexible, sometimes wonderfully aimless, unconstrained and unpredictable, which gives my creativity a huge boost. I am fascinated by always meeting people from all over the world who have chosen to make Berlin their base so that they can be free and creative, because Berlin offers the space to do that – whether in a studio, or at WeWork or Berghain.”

CHANGING STORIES.
“Only 9 per cent of the 9.1 billion tonnes of waste plastic that accumulates around the world was recycled and 12 per cent was incinerated. We give talks daily on the theme of avoiding plastic and we are working with the City of Berlin on concepts for a plastic-free Fashion Week. Only together can we shake things up.”

TELLING STORIES.
“Emotionalisation begins at the trade show stand rather than in-store. If the sparks don't fly at the trade show it will be tricky to tell the brand story or implement the presentation of the brands across the sales areas. Firstly, the aim is to use key looks and storytelling to capture buyers’ attention and make statements. We are working together with the brands on showcasing differentiating factors and genuinely presenting something new. Secondly, we recommend bringing young sales staff along to Berlin as well, to internalise this dynamic as well as the brand stories; and to then make these stories come alive for end consumers across the sales areas.”

Denim Expert Ltd. joined the Fashion Industry Charter for ClimateAction alongside other brands and suppliers.
Denim Expert Ltd. is the first manufacturer in Bangladesh to join the UNFCCC (United Nations Framework Convention on Climate Change) and currently taking climate action in line with the goals established by the Paris Agreement of 2015. The company is limiting their Green House Gas (GHG) emissions supporting the world reaching climate neutrality by 2050.

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty, which entered in to force on 21st March 1994, having being ratified by a sufficient number of countries. The ultimate objective of the convention is to stabilize greenhouse gas concentrations in the atmosphere at a level that will prevent dangerous human interference with the climate system.

The parties to the convention have met annually from 1995 in Conferences of the Parties (COP) to assess progress in dealing with climate change. In 1997, the Kyoto Protocol was concluded and established legally binding obligations for developed countries to reduce their greenhouse gas emissions in the period 2008–2012. The 2010 United Nations Climate Change Conference produced an agreement stating that future global warming should be limited to below 2.0°C relative to the pre-industrial level. In 2015 the Paris Agreement was adopted, governing emission reductions from 2020 onwards, through commitments of countries in Nationally Determined Contributions, lowering the target to 1.5°C. The Paris Agreement entered into force on 4 November 2016.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection