From the Sector

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

PFAFF 1591
On the fair PFAFF INDUSTRIAL will show its electronic single-needle shoe post-bed machine with touch-control panel, new thread trimmer for short thread ends (< 5 mm) and new programmable thread tension. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension.

PFAFF 8303i
The ot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials will be exhibited as “shoe version” with very small/slim post from back. Effortlessly shoe uppers with small radii can be taped. The slim post and the differential feed (via two separate drive motors for the top and bottom feed roller) ensures absolute neat seams and a requested fullness und shaped parts.
 

A true New Eco High-Tech Force of Nature

At ISPO, AKA – Asahi Kasei Advance keept the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values.

Indeed, the flexible and multitasking range is the high-tech solution for sportwear, outerwear and beyond. The collection embraces the casual and sporty mood of active urban surfers as well as that easy-to-wear attitude for a relaxing free-time at home.

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

•    Composite battery enclosures for e-mobility
•    Flexible new leaf spring generation for rear axles
•    Innovative component designs for passenger airplanes, helicopters and air taxis
•    Extremely lightweight and stable transfer beam for mechanical engineering

Selective applications with focus on serial production
In the field of automotive applications, SGL Carbon will present at the JEC World composite battery enclosures as a promising new application driven by increasing demand for electric vehicles and the resulting new flexible chassis platforms. The company demonstrates a prototype of a battery enclosure based on carbon fibers. However, hybrid composites with a mixture of glass and carbon fibers are also possible.

In the aerospace sector, SGL Carbon is also expanding its portfolio of realized projects and expertise relying on the trend to use more efficient materials and processes in this industry too.
In the area of primary structure components, the company will present a demo exhibit for the door frame of a passenger airplane realized in collaboration with external partners and based on 50k carbon fiber from the SGL Carbon, which is suitable for serial production.

Live simulations and intense exchange at the booth
Visitors can experience live how their ideas can be implemented both sustainably and cost-effectively in composites thanks to simulations. Experts from the company’s own Lightweight and Application Center demonstrate the path from the concept to virtual prototypes using simulation software, with the result visible either to the entire audience or just individual visitors. To prepare, interested parties can contact the team now at the following link: https://www.sglcarbon.com/anmeldung-jec.

On March 4, 2020, the SGL Carbon stand will host its traditional get-together for customers and friends starting at 4 p.m. – no registration necessary.
 

Within the framework of the preparations for the Group annual financial statements and based on preliminary results, SGL Carbon confirms its guidance for 2019 as revised in October 2019. Accordingly, the Company continues to expect Group sales between €1.05 and €1.1 billion and Group EBIT before extraordinary items between €45 and 50 million. In addition, net financial debt as of December 31, 2019 has also developed as expected, increasing by a mid double digit million € amount and thus remaining below the €300 million mark.

SGL Carbon also confirms the initial outlook for 2020 as presented in October 2019. Group sales is anticipated slightly below the 2019 level and Group EBIT before extraordinary items 10-15% below the 2019 level. To reflect the lower earnings expectations and within the context of a conservative free cash flow management, the Company will restrict capital expenditures to €70-80 million in 2020 (previous guidance: approximately €100 million) and thus approximately on the level of depreciation.

As usual, SGL Carbon will communicate further details on the guidance for 2020, particularly relating to the guidance on the level of the reporting segments, with the publication of the annual report 2019 on March 12, 2020.

The Company will also publish statements on the new mid-term plan on this date.

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

“On a hand, the protocol preserves the unique ‘genius loci’ of our territory – it respects the heritage of all our partners, from the smaller businesses to the more structured ones - on the other hand, it works like a shared compass of sustainable values, allowing the whole supply chain behind Manteco products to stand out and be competitive on the global stage” adds Mantellassi.
 
The protocol and its monitored and traceable system cover virtuous management of resources – e.g. Water, energy and chemical products - waste management and low production impact on the environment but also responsible standards in terms of employment, quality of the working environment, equal rights and anti-discrimination policies.

One of the key  results of such commitment and sustainable development is the creation of an upgraded version of the recycled wool  MWool™: a top ingredient made from premium recycled wool process guaranteed by the Manteco System.The System works like a symphony where management, measurement and controls  are not there just to test  the quality of each single phase of processes or  products , but to make sure and offer the complete traceability of Manteco production.  From raw material, to yarn, spinning, finishing, testing and final fabric.

Some productions tips about Manteco:

•  5.3 million kg of raw materials processed annually.
•  6.860 tests on raw material per year.
•  34.400 tests on finished products.
•  100% made in Italy system completely based in the Prato district since 1943.
•  Total transparency and traceability thanks to a highly skilled management system.

With a turnover of over 91m Euro in 2019 and an annual growth of 17,80% since 2012, Manteco SpA is the 4th textile company in Italy, listed in the TOP30 companies of the Italian fashion system. “The unique Manteco system adds value to our products while highlighting the sustainable path we share with all our partners both upstream and downstream”.

Dedicated marketing channel to better serve the US market

Huntsman Textile Effects and Xenon arc today announced the formation of NaviColor, a dedicated marketing channel to service the unique needs of select customers in the United States textiles and apparel industry.  

NaviColor is a business specifically designed to meet the needs of select Huntsman Textile Effects customers and to further expand the growing customer base. NaviColor features a dedicated team of professionals in a highly advanced technological environment to support customers utilizing Huntsman’s Textile Effects innovative chemicals, dyes and digital inks in the United States.  

NaviColor is the latest deployment of Xenon arc’s innovative xa-Direct model that helps the world’s preeminent manufacturing companies reach, grow and more effectively service the needs of their customer bases. Leveraging its domain expertise of the marketplace, combined with extensive voice of the customer research and leading-edge technology platform, the xa-Direct model delivers enhanced customer intimacy, valuable insights and improved customer service levels.

“We are excited to partner with Huntsman Textile Effects,” commented Mica Zuniga, Vice President of Strategic Growth for Xenon arc.

NaviColor will exclusively represent Huntsman Textile Effects product portfolio including:

•  Dyes
•  Chemical Auxiliaries
•  Digital Inks

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

They include the new ‘digital twinning’ capability introduced in 2019 for all Monforts machines, with advanced sensor technologies which make it possible to access comprehensive technical machine data from any location using the company’s Smart Support and Smart Check apps. In addition, the digital twin system provides information on individual wear parts, such as, for example, converters or gears.

These latest developments have been very favourably received by Monforts customers, especially in Europe.

50th anniversary
The very first Heimtextil – the leading trade fair for the home textiles market – was also held in Frankfurt in January 1971 and Monforts customers Bierbaum Group and Konrad Hornschuch AG are amongst the German companies who were there from the very start and have attended every annual show since.

Bierbaum Group, based in Borken, is the company behind the well-known Irisette bedding brand and is celebrating its own 125th anniversary in 2020. It has also introduced products bearing the German government’s new Grüner Knopf textile seal of approval for sustainable production.

As a specialist in synthetic leathers for home surfaces, as well as vehicle interiors, Konrad Hornschuch AG, of Weissbach, has been a member of the €44 billion automotive giant Continental AG since 2016.

Representatives from both companies received memorial trophies at a special presentation held on January 7th during the 50th anniversary Heimtextil show.

The home textiles market remains very strong in Germany, with sales amounting to some €9.6 billion in 2019, according to analyst IFH Cologne.

Global growth
The first Heimtextil in 1971 was a significant success, attracting 679 exhibitors from 26 countries.

This year’s show, however, attracted a total of 2,952 exhibitors from 66 countries, reflecting not only the growth of the home textiles industry, but also the globalisation which has taken place over the last half century.

Monforts now has customers for its advanced finishing technologies around the world, with home textile customers from India and Pakistan being particularly well represented at Heimtextil 2020.

Among stand outs from Indian companies at this year’s show was the 2020 collection of Welspun India’s famous Christy England brand, inspired by botanical studies of the gardens of British stately homes. Welspun towels meanwhile benefit from the company’s HygroCotton hollow core yarn technology, produced by a proprietary spinning method which ensures they become softer, fluffier and more absorbent after every wash.

An equally ground-breaking new technology is being introduced by Trident Group, which is one of India’s largest vertically-integrated home textiles manufacturers and two years ago installed five complete Monforts finishing ranges for its new linen department.

Trident’s patented Air Rich yarns feature pores throughout their cross sections for high breathability and absorbency, as well as rapid drying.

Monforts home textile customers from Pakistan stressed the resource efficiency of their processes and products as a result of investments in advanced technology, and during the show the ‘Sustainable Pakistan’ initiative was announced.

Supported by GIZ, the German Society for International Cooperation, the initiative aims to reshape global perceptions of Pakistan’s manufacturers and their innovations. So far, twenty producers have been carefully chosen to be presented on this global platform and will help rebrand Pakistan’s textile industry at the Heimtextil exhibitions going forward.

Heimtextil’s organiser Messe Frankfurt also announced its own new alliance with the United Nations Office for Partnerships, in order to support the UN’s Sustainable Development Goals.

Constancy
Many things have changed since 1971 and home interiors are certainly no longer predominantly orange and brown – and perhaps unlikely to ever become so again.

It’s clear, however, that there has been a constancy in the push to consistently improve textile technologies, processes and products that may have originated in Europe, but have subsequently spread around the world.

And the significance of both microprocessors and sustainability in 2020 could only have been guessed at back in 1971.

Intertextile Shanghai Home Textiles – Autumn Edition will return from 24 – 26 August 2020 at the National Exhibition and Convention Center (Shanghai), organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). Stepping into its 26th edition, the trade fair will provide exhibitors the perfect opportunity to introduce new products and expand their distribution networks, as well as serving as a source of information and inspiration for professionals in every aspect of the industry.
 
Celebrating its 25th anniversary last August, the Autumn Edition of Intertextile attracted 1,147 exhibitors from 27 countries & regions, as well as 35,390 trade buyers from 117 countries & regions (2018: 104), reflecting the increasing internationalism of Messe Frankfurt’s textile fairs in China, and the growing opportunities for international suppliers to meet a wide range of buyers in Shanghai. The trade fair’s capacity to attract large and diverse crowds has reinforced its status as the leading business platform for the home textile industry in the Asia Pacific region.
 
In the next edition, a large collection of quality Chinese companies, as well as premier overseas brands will once again present the entire spectrum of home and contract textile products including:

• Textile editors
• Whole Home Products
• Windows & Upholstery
• Bedding, Bath, Kitchen & Table
• Carpets & Rugs
• Sun-Protection
• Wallcovering
• Digital Print & Technics
• Fibers, Yarns & Chemicals
• Textile Designs

Opportunities abound in China’s home textiles market
 
“The upcoming Autumn Edition of Intertextile is set to offer suppliers and buyers the best platform to capture new business opportunities, especially as we continue to focus on bringing together more key players from the textiles, interiors, architecture and hospitality sectors in China and internationally,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.
 
“Over the years, Intertextile has been evolving from a traditional trade fair to an immersive and interactive experience that inspires and engages attendees. Today, the fair is more than a business platform; it also delivers state-of-the-art home trends, valuable networking opportunities, as well as innovative and strategic solutions for brand development through a series of fringe programme events,” Ms Wen further explained.
 
As one of the selected exhibitors featured in the Talks & Tours series at the 2019 fair, Mr Thomas Luys, Sales Manager of LIBECO-LAGAE: “We had quite a diverse range of visitors, including an increase in e-commerce buyers, but also more traditional upholstery fabrics buyers. Our booth was also part of the Talks & Tours, so it was important to tell our story to a diverse range of visitors on this tour.”
 
 
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

Bemberg presents fabric innovations and collaborations with fashion brands from the US and beyond

Bemberg will present a full range of new fabric innovations at Première Vision New York. These include manufacturers from around the world including Brunello S.p.A. and Cotonificio Albini S.p.A. from Italy, as well as luxury linings already installed at the Bemberg Lining Showroom in the heart of the Garment District hosted by CHH America. Relevant to report, the luxury yarn dyed jacquard linings made in Japan that can be customized following brands’ designs. While usually minimums are not met by emerging brands and start-ups, Bemberg decided to cooperate with a Japanese producer to offer customized yarn dyed Jacquard lining starting from 55 yards, per colour. Indeed, Bemberg will offer attractive designs, precious aesthetic while keeping its usual technical performances and the precious touch.

“On show in New York there is the whole process of sustainable fashion making,” explains Junshu Furusawa, Sales of Bemberg. “Indeed, through these fabric suppliers, we will be showcasing also new premium brand fashion range adoptions and collaborations with brands such as CAALO that is making its mark in the outerwear market with its Sustainably produced Functional-Luxury proposal

The participation at Première Vision New York is the second step of a global tour pointing to some of the most cutting edge design innovations on planet Fashion. #Bember2020 kicked off in Florence for Pitti Uomo, the next appointments will be ISPO in Munich. At each ‘sustainable pit-stop’ the company will showcase a different aspect of its multitasking and sustainable imprint.