From the Sector

1055 results

The Montex®Coat ticks all the right boxes for coating success in 2021

A recent Montex®Coat installation at a European mill.

24.02.2021

The Montex®Coat ticks all the right boxes for coating success in 2021

Flexibility, product uniformity and automation are the keys to success for coating businesses in today’s rapidly-changing technical textiles industry, explained Jürgen Hanel, Monforts Head of Technical Textiles, at the recent 1st World Congress on Textile Coating.

Introducing the latest Montex®Coat magnetic roller coating option to virtual delegates from around the world at the conference organised by International Newsletters, Hanel explained why this technology makes perfect sense now

“The magnetic roller system allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process,” he said. “It provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater.”

With traditional dip coating systems, he added, as well as with many standard knife coating technologies, there is always a difference in the tension between the centre and the edges of the wide width fabrics being treated – and hence the amount of pressure with which the coating is applied. With the use of a magnetic roller, equal pressure is applied across the full width of the fabric, with consistent results even at wide widths of over 2.4 metres. In addition, adjusting the roller surface, rather than changing the coating formulation to match the required add-on and viscosity for each coating effect required, leads to much higher output from the line.

Cleaner and less wasteful
The contribution of such flexible and resource-saving new technologies to a cleaner and less wasteful textile industry was a key theme at the congress – held virtually across the four afternoons of February 11th, 12th, 18th and 19th – as was digitalization and the many advantages it is providing.

“A typical integrated Monforts coating line is automated from the inlet feed to the winder,” Hanel told delegates. “Adjustments can also be made simply and easily from the touchscreen and with the new hand-held remote controller which has recently been introduced for the Montex®Coat unit.”

Manual adjustment, he added, is time consuming and needs the attention of an experienced operator or the reproducibility will not be accurate between coating operations. The adjustment by motors allows each coating to be stored and downloaded again for 100% reproducibility.

The motors can be fully controlled from the touchscreen and all necessary adjustments carried out remotely, making switching from one process to another extremely quick and easy.
The accuracy that is now being demanded by today’s most exacting customers is met with an optional carbon fibre roller – especially in dealing with the winding tension required in the processing of materials such as prepregs for composites and other heavyweight fabrics. Typical applications for the Montex®Coat include the finishing of tents and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments can all be accommodated.

“The World Congress on Textile Coating was characterised by some very stimulating presentations and forums between the speakers and a global audience of textile specialists,” Jürgen Hanel concluded. “It truly reflected the high level of positive changes now taking place in not just textile coating, but the entire textile industry. I look forward to the next edition, which hopefully will be a face-to-face event for even deeper level discussions and debate.”

More information:
A. Monforts Textilmaschinen GmbH & Co. KG Textile Coating World Congress on Textile Coating Montex®Coat

Source:

AWOL Media

print close

24h Collection by TINTEX: a journey into contemporary real people daily life

SS 2022 24H Collection by TINTEX Textiles, dress by Maria Gambina

23.02.2021

24h Collection by TINTEX: a journey into contemporary real people daily life

Every moment of our day is important: TINTEX knows it and for SS 2022 is proposing solutions to enhance our wellbeing, fitting all our possible and different needs 24 hours a day.

From sunrise to sunset

Last season TINTEX “RAW” collection has successfully explored the modern human being dimensions with no more genders and races, and today the new SS 2022 collection confirms the Naturally Advanced Evolution vision built on a strong environment-driven approach and cutting-edge technology able to offer contemporary consumer a brand new smart and performing choice.

Every moment of our day is important: TINTEX knows it and for SS 2022 is proposing solutions to enhance our wellbeing, fitting all our possible and different needs 24 hours a day.

From sunrise to sunset

How? The SS2022 TINTEX 24h collection is offering solutions that can fit the different moments of our daily lives to rediscover ourselves in the outside world, leaving behind the social isolation that we all experienced in 2020. Freedom, comfort, flexibility and movement are the concepts the company explores looking not only to fashion moments, but to all the occasions of life where the most comfortable yet performing and responsible materials - from recycled synthetics to organic cotton - are the “right value choice”.

From there, the concept of giving life to 10 fabrics that truly embody our daily lifestyle: comfort, versatility, wellbeing.

Colours. A journey through warm and vivid colors - from reddish apples to sunny oranges with notes of starry blues - encourages wellbeing, feeling of relief, freedom and happiness because we feel that "we are alive again” when we go outside, doing everything we have always done, but that we were forced to put on pause. “RADIANT YELLOW it’s TINTEX color of the season, with its inherent positivity and strength. An energetic color that calls for a natural freedom to explore the world; a warm sensation of summer that feels like home” declares Ana Eusebio, designer at TINTEX Textiles.

All the collection focuses on the interlock structure, able to “concretely” deliver the value of versatility and fulfil performances needs of different moments of life. The idea is to create a collection that explores only one structure taking it to the limit, recreating, re-inventing and re-exploring its possibilities in order to meet the value of duality. Yes, in a single knit TINTEX challenged the way interlock is usually constructed by exploring each side of the articles and combining texturized with plain surfaces as well as light and heavy weights. Interlock offers natural stretch performances and exceptional dimensional stability.

Moreover, an important eye on responsible performances improvement to meet contemporary challenges and make us feel comfortable and safe! Always thanks to TINTEX DNA that is showing once more its consistent and evolved skills in making smart fabrics combined with unique eco-high-tech finishings.

Materials & finishings. A soft performances journey where it’s all about our dynamic daily lives. Through light and heavier fabrics, we find a well thought blend of innovative and responsible fibres. Strong focus is given to exceptional “transformation” technologies such as Newlife™, Q-Nova®, and ROICA™ EF by Asahi Kasei. While Organic cotton, TENCEL™ Lyocell fibers and TENCEL™ Lyocell fibers with Micro technology offer a unique natural and precious touch.

Fresh fibres and finishings that enhance freshness and comfort. Polygiene® STAY FRESH and Polygiene® Odor Crunch for active odor control performances, Hydroperm® by Archroma technical hydrophilic finishing for a fast dry, comfortable surface and a fresh look. Absolute novelty of the season is the TASTEX®COOL-EX by TANATEX, a skin-care treatment agent based on micelles, which gives a special cool sensation using dynamic temperature control.

Lastly, TINTEX addresses the accessories and outerwear markets with a “look-like leather” created with a water-based coating technology that incorporates pine shell.

Wardrobe solutions. 10 versatile articles that can perfectly fit the different areas of our daily wardrobe: from casual to formal wear, from athleisure to sports, from loungewear to underwear. 10 innovations that have become a REAL 24th hours smart wardrobe thanks to the unique design interpretation of these fabrics by 5 contemporary and innovative Portuguese designers such as : Rita Sá, David Catalán, Maria Gambina, Maria Meira and Behén.

Unique pieces designed and created by them to show once more the beauty, the versatility, the smart performances of TINTEX collection that has been able to transform itself into a naturally advanced valuable wardrobe where fabrics have concretely come to life to make our everyday life smart in each moment! You can have a real look at this wardrobe that fully represent the values behind the collection, smartly interpreted by the Portuguese designers at this video https://www.youtube.com/watch?v=ppPHPK0Zyu8 .

Thinking about what is happening around us as planet and individuals in an era of unpredictable challenges, we need to be creative constantly reinventing ourselves, aware of a new society and way of consuming where environment and human needs count. And TINTEX, that has over-time established itself as a global leader in smart innovation, decided to focus exactly on that. The company DNA and vision of Naturally Advanced Evolution is centered on this new way of life that must adapt, but NEVER - now more than ever - compromises neither nature nor new generation’s performance.

More information:
TINTEX ROICA Tencel C.L.A.S.S.

Source:

GB Network

print close

22.02.2021

vti: FFP2-Sicherheit „made in Saxony“ contra Billigpreise aus China

Sächsische Mittelständler kämpfen mit Innovation und Know-how im Bereich der FFP2-Masken gegen minderwertige Qualität aus Asien.

„Den Mittelständlern wurden von der Bundesregierung viele Millionen für die Entwicklung von textiler Schutzausrüstung in der Pandemie versprochen. Doch angekommen ist bei den Textilern in Sachsen bis jetzt nichts“, stellt Dr.-Ing. Jenz Otto, Hauptgeschäftsführer des Verbandes der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e.V. (vti), enttäuscht fest. Während die deutschen Bürger in den Apotheken nach wie vor Masken aus China mit teilweise fragwürdigen Kennzeichnungen auf die Gutscheine der Bundesregierung erhielten, würden für die Qualitätsmasken „made in Germany“ internationale Vertriebswege aufgebaut.

Sächsische Textilunternehmen aus dem vti-Verbandsgebiet, die den Aufrufen der Regierung zur Produktion von Schutzausrüstung im Frühjahr 2020 mit Euphorie, viel Enthusiasmus, hohen Investitions- und Entwicklungskosten gefolgt sind und den Versprechungen vertraut haben, seien bei der Förderung leer ausgegangen.

Sächsische Mittelständler kämpfen mit Innovation und Know-how im Bereich der FFP2-Masken gegen minderwertige Qualität aus Asien.

Das weltweit agierende Unternehmen Norafin Industries (Germany) GmbH (Norafin) führt die Tradition der Textil- und Vliesstoffindustrie fort.
Als die Corona-Pandemie im Frühjahr 2020 in Deutschland ankam, entstand ein neuer Produktionszweig bei Norafin.

Der Vliesstoffspezialist Norafin fand sich mit dem Anlagenbauer XENON Automatisierungstechnik GmbH aus Dresden zusammen. Beide Unternehmen entwickelten eine High-Tech-Maskenproduktionsanlage, die zertifizierte FFP2-Masken vollautomatisiert, ohne manuelle Arbeitsschritte produziert. Ab Juni waren 20.000 Alltagsmasken „Nora LIGHT“ pro Woche mit der ersten Pilot-Anlage möglich. Mittlerweile ist bereits der Nachfolgetyp mit einer Kapazität von 250.000 Masken pro Woche in Betrieb.

Die zertifizierte FFP2 Maske „Nora F“ filtert mindestens 94 Prozent der Partikel und Aerosole größer als 0,6 μm. Damit minimiert sie für den Träger und sein Gegenüber das Corona-Infektionsrisiko im geforderten Standard.Die Maske besteht aus vier Schichten Spezialvliesstoff. Die Außenlage (100 Prozent PET) sorgt für Stabilität und eine erste Filterung von Staub, die doppelte Mittellage (100 Prozent Polypropylen) sichert die Filtration der Aerosole ab und die Innenlage (ebenfalls 100 Prozent PET) transportiert die Feuchtigkeit der Atemluft nach außen.

Diese Masken können auch in der industriellen Anwendung in rauen Arbeitsumgebungen für den sicheren Arbeitsschutz im Umgang mit Glasfasern, Metall, diversen Kunststoffen und Ölnebel sorgen.

Die nächste Innovationsstufe der „Nora F“ ist mit drei Schwerpunkten bereits fest geplant. Dabei stehen die Nachhaltigkeit mit recyclingfähigen und kompostierbaren Materialien, die antivirale und bakterielle Funktionalität sowie der Tragekomfort im Blickpunkt des Entwicklungsteams um Marc Jolly, Head of R&D und Johannes Loos, Business Unit Manager bei Norafin.

André Lang, Geschäftsführer von Norafin, und sein Team sind hochmotiviert an die Entwicklung und Herstellung der Masken gegangen, haben viele Zusatzschichten mit den XENON-Ingenieuren für die Maske „made in Saxony“ aufgebracht und jeweils hohe sechsstellige Summen investiert. Umso enttäuschter war das Team als der Ablehnungsbescheid für die Förderung der sächsischen Maskenproduktion vom Bundeswirtschaftsministerium einen Tag vor Weihnachten ankam.
Norafin geht daher jetzt auch eigene internationale Vertriebswege.

Dr.-Ing. Jenz Otto vom vti plant für die Unterstützung der Vertriebsaktivitäten der Unternehmen aus dem Verband auch in diesem Jahr wieder eine Präsentationsveranstaltung mit Anwendern textiler Gesundheits- und Schutzausrüstung am 28. September 2021 in Chemnitz.

More information:
vti Verband der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e.V. Atemschutzmasken FFP-2 Vliesstoffe Vliesstoffprodukten Norafin

Source:

vti-pressedienst/P3N MARKETING GMBH

print close

SGL Carbon Anlagen: Dichtheitsnachweis DIN EN1591-1

PTFE Füllkörperkolonne

17.02.2021

SGL Carbon plants: DIN EN1591-1 tightness certification

SGL Carbon supplies first plants with DIN EN1591-1 tightness certification to the chemical industry
First column already delivered to major European customer

In plant operation in the chemical industry, the tightness of flanged joints is becoming increasingly important when dealing with aggressive and corrosive operating media. In accordance with European Union requirements, the German government has defined new requirements in the first administrative regulation to the Federal Immission Control Act (BImSchG), which will apply from January 2021. SGL Carbon is the first manufacturer of PTFE-lined columns to be able to provide the required proof of tightness according to DIN EN 1591-1 and has already delivered the first column with the new certification to a major European customer.

SGL Carbon supplies first plants with DIN EN1591-1 tightness certification to the chemical industry
First column already delivered to major European customer

Specifically, the Technical Instructions on Air Quality Control (TA-Luft) of the Federal Immission Control Act (BImSchG) prescribe new, stricter emission values (leakage class L0.01) for keeping the air clean, which must be complied with when operating plants requiring a permit. In order to be able to guarantee the technical tightness of steel/PTFE flanged joints, SGL Carbon, together with a working group of other companies, first determined the EN 13555 sealing characteristic values, which reflect the material-specific PTFE properties as well as the characteristic manufacture and shaping of the linings. With these characteristic values integrated in a database, SGL experts were able to perform realistic DIN EN 1591-1 calculations for flanged joints of a packed column lined with POLYFLURON PTFE and prove the tightness in accordance with TA-Luft. The design, final acceptance and pressure tests in accordance with Directive 2014/68/EU (PED) were successfully certified by a recognized notified body.

"With the rapid implementation of the new tightness requirements for columns, our solutions offer customers further significant added value, which is currently also being applied to other products. Our sales team and technical service are available to provide customers with comprehensive advice on the new directives and our products," explains Ralph Spuller, Director Product Management in the Process Technology (PT) Business Unit at SGL Carbon.

More information:
SGL Carbon Technical Instructions on Air Quality Control PTFE tightness certification

Source:

SGL CARBON SE

print close

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

16.02.2021

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

More information:
MaruHachi AMAC aerospace Automotive natural fibers polymers

Source:

AMAC GmbH

print close

Hexcel’s HexPly® XF Surface Technology for Blade Surface Finishing Process

15.02.2021

Hexcel’s HexPly® XF Surface Technology for Blade Surface Finishing Process

Hexcel announces its latest HexPly® XF surface technology that reduces shell manufacturing time within the wind blade surface finishing process. HexPly XF increases overall blade manufacturing efficiency by reducing time in the mold by up to two hours and by banishing surface defects that require rework before painting.

Hexcel’s HexPly XF surface technology has been formulated to address the limitations of current blade shell surfacing techniques whereby pinholes and other surface defects have to be repaired by hand to achieve the perfectly smooth surface required for painting.

HexPly XF surface technology introduces a new material format as the surface finishing layer, eliminating the need for a traditional in-mold gel coating process. HexPly® XF for infused rotor blades, is a lightweight non-woven semi-preg construction, comprising an epoxy resin matrix, that co-cures with standard epoxy infusion systems. The product has a successful track record in prepreg blades and has now been adapted for infusion processes.

Easy to handle and supplied in a ready to use roll form, HexPly XF can be quickly applied by hand or with semi-automated layup equipment. It features one self-adhesive, surface finishing side - indicated by a removable protective foil. This side of the prepreg is placed against a release agent treated mold surface. Once the material has been positioned, the lay-up of the blade shell structure can start immediately, and the laminate can be infused. After curing, the blade is de-molded with the manufacturer benefitting from a pinhole-free surface that needs minimal preparation before painting.

HexPly XF material is less than half the weight of a typical gel coat per square meter, reducing the overall weight of the blade. Additionally, the consistent areal weight and thickness of the prepreg film provide a completely uniform surface coating, ensuring blade weight distribution and balance are maintained, which is critical as rotor diameters continue to increase. With no need to handle or mix liquid chemicals as in the gel coat process, HexPly® XF also improves the health and safety working conditions on the shop floor.

The material has a shelf life of six weeks at ambient temperature, which also minimizes cold storage requirements and helps to reduce scrap.

More information:
Hexcel Hexcel’s HexPly® nonwovens surface finishing wind turbines

Source:

100% Marketing

print close

C.L.A.S.S. Manifesto

12.02.2021

CALL TO ACTION of C.L.A.S.S. ICON 2021

C.L.A.S.S. launches the Manifesto for Responsible Fashion and kicks off the CALL TO ACTION of C.L.A.S.S. ICON 2021
What does it mean to be a “game changer” in green fashion?
What are the false myths of eco-fashion and what are the guidelines for innovating while safeguarding the planet? And how do you tell the story behind a sustainable fashion collection?

An annual competition to reward a visionary creative who combines design, responsible innovation and communication, capable of raising contemporary consumer awareness of the new values of sustainable fashion. This is the Call to Action launched to find the C.L.A.S.S. ICON 2021 by Giusy Bettoni of C.L.A.S.S. in the Smart Voices panel "C.L.A.S.S. ICON: Award and Manifesto for Responsible Fashion", moderated by the green journalist Diana de Marsanich, and starring, on the 10th February, the fashion designer Gilberto Calzolari, recipient of the international award for creative visionaries in the world of fashion C.L.A.S.S. ICON Award 2020, and Federico Poletti, Marketing and Communication Director of WHITE SHOW.

C.L.A.S.S. launches the Manifesto for Responsible Fashion and kicks off the CALL TO ACTION of C.L.A.S.S. ICON 2021
What does it mean to be a “game changer” in green fashion?
What are the false myths of eco-fashion and what are the guidelines for innovating while safeguarding the planet? And how do you tell the story behind a sustainable fashion collection?

C.L.A.S.S. Manifesto

During the Smart Voice, the C.L.A.S.S. Manifesto for Responsible Fashion, the 2021 edition of the C.L.A.S.S. ICON competition and the Sustainability Formula were presented.

C.L.A.S.S. ICON Award is an international award for visionary creatives in the fashion world who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public: consumers. "We created C.L.A.S.S. ICON to reward visionary designers who create their collections by combining design, innovation and responsibility and who are able to communicate the values behind their garments authentically and effectively to consumers. It's time for storymaking and storytelling to align, otherwise it's just greenwashing" says Giusy Bettoni.

From 15th of February to 15th of April it will be possible to apply by sending an email to classicon@classecohub.org, with a description and objectives of the brand, the sustainability values adopted and the strategy, the designer's profile, a photo-video story of the latest collection, and any previous awards won (all info on http://www.classecohub.org).

During the panel, designer Gilberto Calzolari, the first winner of the first C.L.A.S.S. ICON Award, shared his vision for responsible fashion and his current projects. "My brand is a laboratory of experimentation. I create fashion to open conversations and change the way people behave and think. My creativity, from the choice of fabrics and processes to the image I decide to communicate, are the weapons at my disposal. Since the beginning, I have been really excited to team up with C.L.A.S.S. in order to share a common and challenging journey, with the perspective to be part of a constantly growing network activating mutual support. I have always thought at my collections as a call to action for a better future and now more than ever my mission as C.L.A.S.S. ICON is to make people understand that commitment and sustainability can and must go hand in hand with beauty and elegance. The adage 'kalòs kai agathòs' is one of the classical teachings that should never be forgotten: aesthetics, in my opinion, is inseparable from ethics. That's why I don't just target professionals, but also the end consumer, fashionistas and beyond" says Gilberto.

"For the first edition of C.L.A.S.S. ICON in 2020 Gilberto was decreed as our chosen one, and the path together was sanctioned at that moment: the sharing of values and visions is an indissoluble bond that keeps us united over time. Like Gilberto, each ICON will be part of a community where together with C.L.A.S.S. will try to make a real smart fashion and above all create an important voice," says Giusy Bettoni.

In support of the C.L.A.S.S. ICON award, C.L.A.S.S. presented its Manifesto for Responsible Fashion, which summarises the values that C.L.A.S.S. has been researching, communicating and developing since 2007: the role of the ethical company and its transparent production, the importance of traceable and healthy products, with total respect for people and the environment. A commitment to a circular economy with a positive impact that also means safeguarding the seas, the ocean, the use of water, energy and resources.

"A Manifesto for fashion with the lowest possible impact on the planet and on people and animals’ health thanks to responsible innovation, perfectly up to the challenges of contemporary lifestyle. This is why I created the Sustainability Formula, which only exists when there is design, responsible innovation and we are able to track and measure the impact of products and processes and communicate the new values in an appropriate way. In a word, when there is knowledge" concludes Giusy Bettoni.

F = D x I x S x C
F= Fashion
D=Design
S=Sustainability
C=Communication

More information:
C.L.A.S.S. Manifesto for Responsible Fashion C.L.A.S.S. ICON award C.L.A.S.S. green fashion sustainable fashion Sustainability smart fashion

Source:

print close

The imogo team (left to right): Per Stenflo, textile process specialist Ellinor Niit and CEO Joacim Wellander.

10.02.2021

Dyeing industry first for 7H with imogo

Swedish commission dyeing company 7H Färgeri is looking to propel itself to the forefront of sustainable fabric production with the installation of the first industrial scale imogo Dye-Max spray dyeing line.
Currently under construction, the line will be delivered in the first week of March to the 7H plant close to the Swedish city of Borås. It will have a full working width of 1.8 metres with an operating speed of up to 50 metres for the reactive dyeing of cellulosic fibre-based fabrics. In addition, it will be capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing the company with unbeatable flexibility in production.

A proven Mini-Max laboratory unit for pre-determining application volumes and colour matching will also be delivered as part of the contract.

With the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems, the DyeMax has gained considerable attention since the concept was outlined and a prototype machine constructed in 2019.

A proven Mini-Max laboratory unit for pre-determining application volumes and colour matching will also be delivered as part of the contract.

Pilot scale trials have subsequently been carried out with many well-known international textile companies and their brand partners.
The application unit of the Dye-Max consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo Pro Speed valve that controls the volume to be applied.

Control and precision
“We are achieving an extremely low liquor ratio of around 0.5-1 litres per kilo of fabric and we fully control the pickup, applying precisely what is required to the specific fabric,” says imogo founding partner Per Stenflo. “Compared to traditional padders there is no contamination of the dyebath or dilution of the dye liquor to worry about.
Fast changeovers with virtually no waste together with a high production speed enable a high productivity and unmatched production flexibility. The system is also equipped with an exhaust system and droplet separator to ensure that the environment around the unit is safe and free from particles.

The imogo Mini-Max meanwhile frees up valuable production time by avoiding wasteful pre-runs. The user simply sets the recipe with the Mini-Max and transfers the parameters to the Dye-Max recipe database for the system to be fully production ready.

7H Färgeri was founded in 1935 and has established itself as the Nordic region’s most complete dyeing and processing plant, specialising in technical and functional textiles for the automotive and soft furnishings sectors, as well as functional and protective clothing.

The family-owned business is now run by brothers Johan and Peter Engelmann.
“We are pleased to be pioneering a sustainable first for the dyeing industry,” said Johan Engelmann. “Our goal is to offer the market products and services with the highest quality in the most climate-smart and sustainable way, and imogo’s spray technology will give us the opportunity to offer innovative new services and products to both existing and new customers. It will be a very exciting journey.”

World Congress on Textile Coating
On February 12th Per Stenflo will make a presentation entitled ‘Transforming Textile Dyeing’ during the online World Congress on Textile Coating which is held over four days, between February 11th and 19th.

More information:
imogo intelligent textile coatings World Congress on Textile Coating Textile Dyeing 7H Färgeri

Source:

AWOL Media

print close

08.02.2021

ISKO and HIGH collaborate to create Jacket and Pants

Intelligently designed clothes made with the latest manufacturing technology are the results of the partnership between on of the leading denim innovators ISKO and the Italian brand HIGH. A project, part of the SS2021 HIGH collection, is the start of collaboration in the pursuit of sustainable fashion.

Aimed at bringing a positive change both for the planet and its people, the project presents two pieces – jacket and pants – which embody HIGH’s approach to creativity and production: a wellbalanced mix of specialists’ expertise and a tireless investigation on the latest and most responsible fabric technologies. HIGH identified the R-TWO™ program as the right fabric ingredient, ideal to level up sustainability in its looks.

Relying on a blend of reused and recycled materials, this revolutionary platform works by embedding material circularity into the production process, designing waste out of the system and minimizing impact at scale. With fully traced reused cotton coming from ISKO’s production loss, which is prevented from becoming waste by adding it back into the spinning process, and an efficient use of polyester materials which are spun into newly recycled fibers, the program can provide certified to Textile Exchange environmental credentials. According to the percentage of material contained, these can be either the Content Claim Standard, Global Recycled Standard, Organic Content Standard or Recycled Claim Standard, ensuring better use of raw materials and resource efficiency while providing advanced concepts that don’t compromise on their look and performance.

Additionally, to meet HIGH’s performance needs, ISKO has brought to the table one of its most popular technologies, of course in its R-TWO™ version: Jeggings™, super-stretch denim technology. Soft and lightweight as leggings, it provides comfort with the look of authentic denim and provides the perfect, responsible solution to usher the partnership.

More information:
Isko Denim Sustainability

Source:

Menabò Group

print close

08.02.2021

MoU: Lectra to acquire Gerber Technology

Lectra announces its plan to acquire the entire capital and voting rights of US-based Gerber Technology. A key Industry 4.0 player in the fashion, automotive and furniture industries, Lectra designs smart industrial solutions – software, equipment, data and services – that help brands, manufacturers and retailers develop, produce and market their products.

The acquisition, if and when consummated, would allow Lectra to complement its market position and continue to enhance its offerings based on Industry 4.0 technology that will enable its customers to boost the productivity and profitability of their operations. After the French work council of Lectra is consulted and the binding documentation is signed, completion of the acquisition shall remain subject to merger control clearance and other customary conditions and shall be submitted to Lectra shareholders for approval.

The proposed combination would occur at an opportune time for both companies and their customers. The current uncertain economic climate and unprecedented challenges that fashion, automotive and furniture companies are facing due to the COVID-19 pandemic make it more important than ever for them to transform, digitalize and optimize their operations.

For over 50 years, Gerber Technology has used its proprietary technologies and deep domain expertise to provide integrated software and automated hardware solutions to companies around the world, including over 100 Fortune 500 companies in 134 countries.

The strategic combination of Gerber Technology and Lectra will create a premier advanced technology partner, able to quickly meet changing customer needs and deliver even more value through seamlessly integrated solutions. Together, the two companies will have a large installed base of product development software and automated cutting solutions in operation, with a worldwide presence and a long list of prestigious customers.

Consolidating the two companies’ research and development capabilities will enable the combined company to accelerate development of Industry 4.0 technologies and help its expanded customer base seize the full potential of these innovations.
Integrating the technology of the two companies will endow them with the resources to anticipate and address rapidly changing market conditions.

Key transaction terms

Under the proposed acquisition, Lectra would acquire all outstanding shares of Gerber Technology on a cash-free debt-free basis for an upfront payment of 175 million euros – through a combination of cash and debt – plus 5 million newly issued Lectra shares to AIPCF VI LG Funding, LP (“AIPCF VI LG”), an affiliate of American Industrial Partners that is Gerber Technology’s sole shareholder. This would represent a total amount of about 300 million euros based on Lectra’s closing share price on February 5, 2021. No contingent consideration is contemplated.

Gerber Technology’s revenues was 165 million euros in 2020.

Thanks to the strong value creation deriving from significant synergies, Lectra expects the transaction to be accretive for shareholders from 2022.

Upon closing, Daniel Harari would own c. 14.6% of the Lectra shares and AIPCF VI LG would own c. 13.3%.

Lectra’s Board of Directors would welcome a director representing AIPCF VI LG.

Daniel Harari would continue to be the Chairman and Chief Executive Officer of Lectra. Gerber Technology Chief Executive Officer, Mohit Uberoi, would assume special advisor to Daniel Harari role until end-2021.

Lectra’s shareholders would be invited to vote on the issuance of the 5 million new Lectra shares reserved to AIPCF VI LG at a dedicated Extraordinary Shareholders’ Meeting which is currently expected to be held on April 30, 2021. A report containing additional information will be made available to the shareholders prior to the Extraordinary Shareholders’ Meeting.

Lazard is acting as exclusive financial advisor to Lectra, and Latham & Watkins as legal counsel to Lectra.

Goldman Sachs is acting as exclusive financial advisor to AIPCF VI LG, and Ropes & Gray LLP, Baker Botts LLP and Gide Loyrette Nouel A.A.R.P.I. as legal counsel to AIPCF VI LG.

2020 results, update on the 2020-2022 strategic roadmap and guidance for the coming years will be disclosed on February 10, 2021.

Lectra management will discuss the transaction, provide forward-looking guidance for the combined company upon closing of the transaction and answer questions from the financial community during the February 11, 2021 webcast Analyst Conference meeting in French starting at 8:30 am (CET - Paris).

More information:
Lectra, PLM Gerber Technology Lectra/Gerber

Source:

Lectra - Headquarters

print close

Kornit Wins 2020 EDP Award for its NeoPigment™ Robusto Softener

05.02.2021

Kornit Wins 2020 EDP Award for its NeoPigment™ Robusto Softener

Kornit Digital is named among 29 winners of the 2020 EDP Awards, presented by the European Digital Press Association (EDP). The company’s NeoPigment™ Robusto Softener solution, which ensures superior hand feel for substrates imprinted using the Kornit Presto system for roll-to-roll, direct-to-fabric digital production, was selected “Best Coating and Varnish” in the Consumables category.

Kornit’s Softener solution is applied seamlessly during the printing process. No additional time, labor, or equipment is needed, and most importantly, it is a sustainable solution carrying Eco Passport certification and GOTS verification.
“Kornit Presto with Softener is changing the game for on-demand production, making pigment-based digital print a serious contender for even the most demanding fashion houses,” says Chris Govier, KDEU Managing Director. “Kornit is proud to be recognized for its innovations, and we strive to continue exceeding the market’s demands for efficient, eco-friendly, profitable solutions regardless of the new trends and challenges facing the textile industry.”

More information:
Kornit Digital textile printer pigment printing EDP Award

Source:

pr4u

print close

article as PDF

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
EBIT margin of around -15% and net profit of around -16% of sales expected
First half of 2021 still heavily impacted by the COVID-19 pandemic
Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
EBIT margin of around -15% and net profit of around -16% of sales expected
First half of 2021 still heavily impacted by the COVID-19 pandemic
Change to the Group Executive Committee

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*

*See attached document for more information.

More information:
Rieter spinning fibres natural fibers Financial year 2020 Covid-19

Source:

Rieter Management AG

print close

Hexcel’s HexPly® M9 Prepreg receives Type Approval Certification

25.01.2021

Hexcel’s HexPly® M9 Prepreg receives Type Approval Certification

Hexcel is pleased to announce Type Approval Certification of its HexPly® M9 prepreg materials by DNV GL. The addition of the HexPly M9 prepreg range to Hexcel’s already comprehensive DNV GL certified portfolio provides ship and boat builders with optimal prepreg processing options.

HexPly M9 prepregs enable short cure cycles at 100˚C and above and provide a balance between ease of processing and mechanical performance. Available in high tack and medium tack variants, HexPly M9 prepregs are available with a wide range of unidirectional, woven, and multiaxial reinforcements. Partnered with Hexcel’s own HexTow® IMC2 and HexTow® HM54 / HM63 fibers, designers and engineers can optimize highly loaded composite structures such as masts, wing sails, and foils with increased glass transition temperatures (Tg) and excellent long-term fatigue performance.

Hexcel has completed the DNV GL certification for HexPly M9 in response to the rapidly increasing demand for type-approved high-performance prepreg materials for large composite structures in the commercial marine craft.

Hexcel’s collaboration with Chantiers de l’Atlantique on its new Silenseas cruise ship concept – a concept that uses composite Solid Sail® propulsion as well as dual-fuel engines to reduce emissions and operating costs – is one such application. In this case, DNV GL type approval provides third-party assurance of the product’s quality, performance and consistency, and also helps to streamline the approval of composite parts that replace traditionally metallic structures.

Hexcel has supplied advanced composite materials to the marine industry for more than 40 years and manufactures a comprehensive range of DNV GL certified products including woven reinforcements, multiaxial fabrics, prepregs, and adhesive films. Hexcel is committed to developing new composite technologies for the marine sector, helping builders evolve their designs to produce lighter, more fuel-efficient, and a sustainable craft for the future.

“Our latest Type Approval Certification is an important part of our strategy to provide the most complete package of DNV GL certified composite materials for the marine sector,” said Andreas Sageder, Product Manager at Hexcel. “With the addition of our M9 prepreg resin systems, mast, ship, and boat builders have an expanded range of processing and cure options available for parts requiring higher Tg and improved fatigue performance.”

More information:
Hexcel Hexcel’s HexPly® woven reinforcement multiaxial adhesives marine industry

Source:

100percentmarketing

print close

22.01.2021

vombaur: Filtration textiles

From the drinking water and food industries through water management and mining to the automotive and aviation sectors, mechanical filtration processes are used in almost every industry. As different as the methods, dimensions and special requirements of the filtration process are in each case – technical textiles and often tubular filters are almost always used. This means that tubular filters and narrow textiles by vombaur contribute to the safe and reliable separation or treatment of substances in the widest variety of filtration processes.

Individual solutions
The requirements placed on the textile, the material, the flow rate and the loading capacity of the filters depend on the respective use: a tubular for dewatering soil needs to withstand different forces than a tubular filter for the beverages industry. On the other hand, the latter needs to meet the highest hygiene standards. Because the requirements are so individual, vombaur develops customised filtration textiles for its customers all over the world.

Seamless tubular filters
At vombaur, filter media are round woven seamlessly on unique looms. As a result, they have identical surface properties all around and over the entire length, such as flow rate, loading capacity, shrinkage behaviour or material thickness

Narrow textiles for fabricating filter media
"We manufacture our narrow textiles from a wide variety of high-tech yarns. Sometimes monofilament yarn is used, sometimes multifilament, sometimes spun yarn. Like the type of weave, we select the raw materials depending on the function they need to fulfil," emphasises Gert Laarakker, Sales Manager at vombaur. "So that our filtration textiles reliably perform the job they are supposed to perform. Clean. Safe. Sturdy."

More information:
vombaur Filtration textiles narrow textiles Automotive

Source:

stotz-design.com GmbH & Co. KG

print close

ANDRITZ to supply spunlace line for Minet

ANDRITZ needlepunch line at Minet

22.01.2021

ANDRITZ to supply spunlace line for Minet

International technology Group ANDRITZ has received an order to supply a neXline spunlace eXcelle line to Minet S.A, based in Ramnicu Valcéa, Romania, for processing various fibers from 25 to 70 gsm to produce a wide range of hygiene products. Start-up is expected during the second quarter of 2022.

ANDRITZ will deliver a complete line, from web forming to drying. The line will integrate one high-speed TT card, the robust Jetlace Essentiel hydroentanglement unit equipped with a neXecodry S1 system for energy saving, and a neXdry double-drum through-air dryer.

The close collaboration between ANDRITZ and Minet in needlepunch was an important consideration in the choice of supplier for the spunlace line as well as the fact that ANDRITZ is recognized as the benchmark for production of premium spunlace roll goods.

Just recently, ANDRITZ successfully completed the commissioning of a neXline needlepunch eXcelle line for Minet. This line is dedicated to the production of automotive products made from a large variety of fibers. For this contract, ANDRITZ delivered a complete line from fiber preparation to end-of-line, also integrating card, crosslapper, batt drafter, two needlelooms and a Zeta felt drafter with a working width of more than 6 m. The line is also equipped with the unique ProDyn web profiling system, operating as a closed-loop control system in order to ensure perfect evenness of the products.

More information:
Andritz Minet S.A. spunlace line needlepunch line Automotive

Source:

ANDRITZ AG

print close

Sorpol Ltd. brings American antiviral technology to Israel

19.01.2021

Ascend Performance Materials: Sorpol Ltd. brings American antiviral technology to Israel

Sorpol Ltd., a leading importer and distributor of industrial raw materials in Israel, has launched a website to sell Acteev Protect™ masks, made in the USA by polyamide manufacturer Ascend Performance Materials. The two companies also plan to partner in the distribution of Acteev surgical masks, N95 respirators, nonwoven media and textile fabrics as they become available.

Laboratory tests have demonstrated Acteev fabric effective at deactivating 99.9% of the viruses SARS-CoV-2, the cause of COVID-19, and H1N1, a flu virus. Acteev technology also eliminates bacteria and fungi.

Ofer Soreq, Sorpol’s marketing director, said the Acteev Protect line fits in neatly with the mission of the company.

Recent testing on Acteev fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with 99.9% efficacy on contact. Ascend has submitted several masks designs to the U.S. Environmental Protection Agency and the U.S. Food and Drug Administration to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties in the United States.

In addition to antiviral, antifungal and antibacterial protection, the washable, reusable masks are lightweight, breathable and odor-fighting, making them comfortable to wear during a long shift at work or for outdoor workouts.

Acteev Protect shows promise for use beyond masks, according to Ascend. The technology was originally developed for workout wear, and now the company is working on textile applications ranging from gloves to scrubs to high-end athleisure

More information:
Ascend Performance Materials Sorpol Ltd face masks Covid-19 antiviral gloves

Source:

EMG / Ascend Performance Materials

print close

ISKO Vital™+ Premium community face cover receives the NEN certification in the Netherlands.

(c)ISKO

ISKO Vital™+ - NEN certification

19.01.2021

ISKO Vital™ receives NEN certification

ISKO Vital™+ Premium community face cover receives the NEN certification in the Netherlands.

The responsible face cover brand is the first to be awarded the Dutch standard, recently established by The Royal Netherlands Standardization Institute. The mark of conformity was issued on January 19, when ISKO Vital+ completed the certification process.

ISKO Vital™+ Premium community face cover receives the NEN certification in the Netherlands.

Supported by parent company ISKO’s 100-years of experience and know-how in the textile industry, ISKO Vital+’s range of Premium face covers has exceeded the requirements set out by NEN for community face covers. The recently established Dutch standard, NEN-spec 1- 2 requires manufacturers to pass rigorous testing for bacterial filtration efficiency, breathing resistance, fit and ease of use and sustainability.
With a bacterial filtration efficiency (BFE) of ≥95% that exceeds the NEN’s minimum requirement of ≥70%, the ISKO Vital+ Premium face cover is a patented 4-fold design made from ISKO Vital™ fabric, a groundbreaking textile solution created by ISKO’s in-house research and development experts. It is fluid repellent and very easy to breathe through thanks to a single layer of organic cotton which is dermatologically tested, OEKO-TEX Standard 100 certified and gentle on the skin, providing a superior level of comfort as assessed by an independent panel.

Available in different sizes and colors, the Premium face covers surpass the minimum NEN requirement for breathing resistance of <70 Pa/cm2 too, with a respiratory resistance lower than 40 Pa/cm2 – making the face covers very comfortable to wear. In addition, they are much more sustainable than disposable masks as they can be reused and hand or machine-washed up to 15 times without loss of quality. “Current circumstances are expected to last in the foreseeable future, so it is extremely important to wear proper community face covers”, explained Edgar van der Linden, ISKO Vital™ Medical Business Lead. “Thanks to the mark of conformity, it is now clear that face cover must have the highest possible filtration efficiency and must also be comfortable, expressed in the lowest possible breathing resistance. Environmental aspects are also addressed. As a supplier of washable face covers made from one innovative layer of organic cotton we consider that very important. A good community face cover offers a combination of high filtration efficiency, comfort, ease of use and minimizes the burden on the environment”.

More information:
ISKO Vital™ NEN Certification

Source:

MENABO

print close

14.01.2021

PREMIUM+SEEK+JOOR Passport is back

Summer 2020 saw the first ever staging of PREMIUM+SEEK Passport by JOOR. In the midst of the pandemic, it offered the industry an opportunity to continue doing business, stay in contact with key partners, and expand business networks. Over 150,000 retailers took part in the event in 2020 and 40,000 products were sold.

The second edition of the PREMIUM+SEEK+JOOR Passport event will be an optimised and focussed version and offers participants maximum opportunity for success. From 27 January around 100 brands curated by the team at the PREMIUM GROUP will once again have access to JOOR’s network of over 200,000 selected international retailers. Virtual showrooms will act as the location for showcasing the latest collections, telling brand stories and closing deals. Every showroom can be individually designed by participating brands so as to stage and communicate their brand identity in a purely digital setting. Accessible at any time, without time-consuming logistics.

The partnership between the PREMIUM GROUP and JOOR is due to continue in July 2021. In future, there will be a hybrid event where the physical and virtual worlds will go hand in hand. Face-to-face is still essential and now more important than ever. Networking becomes easier and more effective; stories are told and emotions triggered. Processes that follow are digitally optimised with JOOR and handled more easily than before.

In summer 2021 there will be a return to a physical coming together with SEEK, PREMIUM and FASHIONTECH. From 6-8 July – as part of Frankfurt Fashion Week.

More information:
SEEK Premium Group JOOR Trade show Messe Frankfurt

Source:

PREMIUM Group

print close

14.01.2021

Hologenix and Kelheim Fibres launch Celliant Viscose

Hologenix, creators of Celliant®, infrared responsive technology, and Kelheim Fibres, a world-leading manufacturer of viscose specialty fibers, have partnered to launch Celliant Viscose at ISPO Munich 2021. Celliant Viscose is a finalist in Best Products by ISPO and will be showcased in the Fibers & Insulations Category for ISPO Textrends, where realistic views and 3-D simulations will be available for each material.

The introduction of nature-based Celliant Viscose will be the first in-fiber infrared sustainable solution on the market and meets a consumer demand for more environmentally friendly textiles. An alternative to synthetic fibers and extremely versatile, Celliant Viscose blends beautifully with cotton, micromodal, lyocell, wool varieties including cashmere. It also has many applications across industries as it is ideal for performance wear, luxury loungewear, casual wear and bedding.

Celliant Viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, increasing local circulation and improved cellular oxygenation. This results in stronger performance, faster recovery and better sleep.

Celliant Viscose provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as fiber enhancements from Celliant infrared technology. Celliant’s proprietary blend of natural minerals allows textiles to capture and convert body heat into full-spectrum infrared energy, resulting in stronger performance, faster recovery and better sleep. In addition, Celliant is durable and will not wash out, lasting the useful life of the product it powers.

An Affordable, Long-lasting Solution with Diverse Applications
As opposed to other IR viscose products which are coatings based, Celliant Viscose’s in-fiber solution increases wearability and longevity with a soft feel, durability from washing and longer life. The combination of Kelheim’s distinctive technology and the Celliant additives creates this unique fiber that provides full functionality without the need for any additional processing step — a new standard in the field of sustainable IR viscose fibers. This single processing also makes Celliant Viscose more cost-effective and time-efficient than coatings.

In addition, Kelheim’s flexible technology allows targeted interventions in the viscose fiber process. By modifying the fiber’s dimensions or cross sections or by incorporating additives into the fiber matrix, Kelheim can precisely define the fiber’s properties according to the specific needs of the end product.

Highly Sustainable
Celliant Viscose is a plant and mineral-based solution for brands seeking an alternative to synthetic fibers. It contains natural raw materials that are from the earth and can return safely to the earth.

Nature-based Celliant Viscose is certified by FSC® or PEFC™, which guarantees the origin in sustainably managed plantations, and is part of the CanopyStyle initiative to protect ancient and endangered forests. The production of Celliant Viscose takes place exclusively at the Kelheim facilities in Germany, complying with the country’s strict environmental laws and guaranteeing an overall eco-friendly product.

Backed by Science
Celliant is rigorously tested by a Science Advisory Board composed of experts in the fields of physics, biology, chemistry and medicine. The Science Advisory Board has overseen 10 clinical, technical and physical trials, and seven published studies that demonstrate Celliant’s effectiveness and the benefits of infrared energy.

For more information, visit www.celliant.com/celliant-viscose/

More information:
Kelheim Fibres Hologenix Celliant viscose fibers Sustainability

Source:

Kelheim Fibres GmbH

print close

RUDOLF GROUP: Bio-Based DWR Performance from Natural Sources

(c)RUDOLF GROUP

It makes sense and it’s logic. It’s BIO-LOGIC

article as PDF
RUDOLF_RUCO-DRY BIO CGR

13.01.2021

RUDOLF GROUP: Bio-Based DWR Performance from Natural Sources

The RUDOLF GROUP is an uncontested agent of positive change especially when it comes to pioneering technologies that help transforming the textile and fashion industries. A shining example of conscious leadership played by the RUDOLF GROUP over the past decades is the invention and introduction of fluorine-free Durable Water Repellency (DWR) for textile and apparel. Since 2003, the RUCO-DRY product line has gradually convinced the industry that water-resistance can be achieved through the study and replica of natural models. “Biomimicry and the study of lotus leaves and bird’s feathers were instrumental in developing the very first fluorine-free DWR’s” says Dr. Gunther Duschek, Managing Director at RUDOLF GROUP.

Fifteen years later, RUDOLF GROUP does it again and takes a significant leapfrog. It pushes the boundaries of R&D well beyond fluorine-free, embraces nature and introduces water repellent performance entirely based on natural components. “We are launching two brand new, distinctive product propositions entirely manufactured from natural sources that do not compete with human and/or animal nutrition” continues Dr. Duschek.

RUCO®-DRY BIO CGR is an absolute breakthrough and the first Durable Water Repellent (DWR) agent based on plant-derived processing wastes. In fact, RUCO®-DRY BIO CGR is made of natural waste that accumulates as by-product during the processing of cereal grains in the food industry. The leftover material that would otherwise be disposed of is refined to create a powerful water and stain repellent textile finish.

“By turning natural waste into DWR we have optimized the biologic character of RUCO®-DRY BIO CGR where the active component is made of more than 90% bio carbon” states Dr. Dirk Sielemann, R&D Director at RUDOLF GROUP. He continues: “Although most of the product is composed by recycled biomass, RUCO®-DRY BIO CGR meets the performance and durability of conventional water repellent textile finishes”.

RUCO®-DRY BIO NPE is an equally outstanding product innovation where DWR is entirely based on a carefully selected mix of natural plant extracts. The well-balanced mix of plant-based ingredients combines excellent water and stain repellent effects with breathability and a natural handfeel.

Unlike other 100% renewable raw materials, those used in the making of RUCO®-DRY BIO NPE are chemically and genetically non-modified and are not used as food, feed or fuel. Furthermore, all of the plant extracts that compose RUCO®-DRY BIO NPE are subject to a strict conservation and sustainability framework. “That’s why the supply of RUCO®-DRY BIO NPE is likely to remain limited to the creation and marketing of performance outdoor and sports apparel programs embedding state-of-the-art sustainable technology” concludes Dr. Duschek.

Both RUCO®-DRY BIO CGR and RUCO®-DRY BIO NPE are marketed through the BIO-LOGIC trademark, registered by RUDOLF GROUP.