From the Sector

Reset
86 results
Flax for Composites: Woven tapes made of natural fibres by vombaur (c) Elke Wetzig, Wikimedia
Lightweight, firm, sustainable: Flax tape by vombaur
02.12.2020

Flax for Composites: Woven tapes made of natural fibres by vombaur

Flax has accompanied people for thousands of years, in linen fabrics, in ropes, as insulation material. And until the present day. With woven tapes made of flax, vombaur makes the functional and ecological advantages of natural fibres available for lightweight design.

Lightweight and firm
Flax fibres are particularly rigid and tear-proof. Textiles made of the natural material therefore give natural fibre reinforced plastic (NFP) special stability. Additionally, flax has a low density. The components thus combine high rigidity and strength with low weight. Another functional plus: natural fibre reinforced plastics are less prone to splintering than glass fibre reinforced plastics.

Sustainable material
The cultivation of flax binds CO2 and the production of NFP generates 33 percent lower CO2 emissions than conventional fibre reinforced plastics. The energy consumption is 40 percent lower. This reduces production costs and improves the material's CO2 footprint. Punch-packing arguments for natural fibre tapes – like flax tape by vombaur – in lightweight design applications.

Flax has accompanied people for thousands of years, in linen fabrics, in ropes, as insulation material. And until the present day. With woven tapes made of flax, vombaur makes the functional and ecological advantages of natural fibres available for lightweight design.

Lightweight and firm
Flax fibres are particularly rigid and tear-proof. Textiles made of the natural material therefore give natural fibre reinforced plastic (NFP) special stability. Additionally, flax has a low density. The components thus combine high rigidity and strength with low weight. Another functional plus: natural fibre reinforced plastics are less prone to splintering than glass fibre reinforced plastics.

Sustainable material
The cultivation of flax binds CO2 and the production of NFP generates 33 percent lower CO2 emissions than conventional fibre reinforced plastics. The energy consumption is 40 percent lower. This reduces production costs and improves the material's CO2 footprint. Punch-packing arguments for natural fibre tapes – like flax tape by vombaur – in lightweight design applications.

Circular Economy
Circular Economy – this also works in lightweight design. The number of recycling cycles without loss of quality is higher for natural fibre reinforced plastics than for glass or carbon fibre reinforced plastics: the thermoplastic matrix of the composite can be melted and recycled after a product life cycle. The natural fibres can "live on" in other products – injection moulded products for example.

Versatile applications
"Composites from our flax tapes are used to reinforce high-tech skis as well as for extruding state-of-the-art window sections – the applications are countless," explains Tomislav Josipovic, Sales Manager with vombaur. "As a development partner, we support applications for the automotive, wind energy, construction, sports and many other industries with our composite textiles."

More information:
vombaur Naturfasern Composites
Source:

stotz-design.com

Monforts (c) Monforts
19.11.2020

İlay puts a premium on energy with new Monforts installation

The company, founded in 1993, has established a reputation for leadership in new printing techniques and technologies with customers across Europe, as well as with many of the leading Turkish brands.

Mission
On its mission to achieving continuous progress in error-free and resource-efficient manufacturing, İlay has just taken delivery of a new Monforts Montex stenter range, with a working width of two metres and eight TwinAir chambers.

“This installation provides us with much improved control options for all process parameters and compared to the old stenter it is replacing, we are particularly impressed with the energy savings we are making,” Mr Savaş says.

Achieving energy savings on Montex stenters has been a key focus for Monforts designers and engineers in Germany for many years.

The company, founded in 1993, has established a reputation for leadership in new printing techniques and technologies with customers across Europe, as well as with many of the leading Turkish brands.

Mission
On its mission to achieving continuous progress in error-free and resource-efficient manufacturing, İlay has just taken delivery of a new Monforts Montex stenter range, with a working width of two metres and eight TwinAir chambers.

“This installation provides us with much improved control options for all process parameters and compared to the old stenter it is replacing, we are particularly impressed with the energy savings we are making,” Mr Savaş says.

Achieving energy savings on Montex stenters has been a key focus for Monforts designers and engineers in Germany for many years.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying.

The resulting constant evaporation rate within the stenter ensures optimum energy utilisation. In addition, TwinAir chambers feature special panelling for low heat radiation, careful sealing of all connecting positions and chamber access points, and air locks at both the entry and the exit.

“Monforts stenters set the benchmark in terms of energy efficiency and help conserve resources,” says Ahmet Kılıç, founder of Neotek, the representative for Monforts in Turkey. “Automatically setting the initial moisture content requirement for a specific process before drying to a minimum value helps reduce heat evaporation and consequently, energy consumption. The hermetic sealing of the stenter frame further prevents the loss of heated air as well as the ingress of excessive cold air – which has to be heated back up if it is not kept out in the first place.”

The new Montex line was completed at İlay Textile in August 2020, with no problems during either installation or commissioning.

 

Source:

AWOL Media

04.11.2020

DyStar Exhibits at China Interdye 2020

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

DyStar’s sustainable solutions can further optimize productions, processes, and reduce costs. Some of these products and concepts are highlighted at the event as follows:
•    Recent launch of Cadira® Polyamide and Cadira Polyester/Cellulosic Exhaust
•    Total collection of eleven Cadira® modules
•    High Fast Dianix® XF2 Range
•    Sera® Wash M-VFN
•    Levafix® CA and Remazol® SAM offer

Despite a year full of global economic challenges, with the supply chain and stakeholders heavily strained by the global pandemic, DyStar is determined to support the industry and its customers. They can benefit from our legacy of innovations and product offerings, so that they can continue to drive sustainability and growth in their respective domains, contributing in a responsible and yet sustainable manner for a cleaner future.

12.10.2020

CHT Germany GmbH: Sustainable heat for sustainable chemical solutions

  • Efficient heat supply of the future reduces environmentally harmful CO2

The heating sector offers a variety of options for the energy turnaround. One of them is district heating. This is an efficient energy source that makes an important contribution to sustainability and climate protection, especially when used within heat and energy-intensive companies. The CHT Group for speciality chemicals has opted to utilise the district heating supplied by the Tübingen public utilities (swt) at its headquarters in Tübingen - and thus reduce CO2 and the use of fossil fuels. This also resulted in the district heating network of the municipal utilities being extended by an additional half kilometre.

  • Efficient heat supply of the future reduces environmentally harmful CO2

The heating sector offers a variety of options for the energy turnaround. One of them is district heating. This is an efficient energy source that makes an important contribution to sustainability and climate protection, especially when used within heat and energy-intensive companies. The CHT Group for speciality chemicals has opted to utilise the district heating supplied by the Tübingen public utilities (swt) at its headquarters in Tübingen - and thus reduce CO2 and the use of fossil fuels. This also resulted in the district heating network of the municipal utilities being extended by an additional half kilometre.

Until recently, heating, hot water and various process steam applications within the CHT site in Bismarckstrasse, Tubingen were fed from a central steam generation plant fired by heating oil. Now three of four company buildings are connected to the swt district heating network and the process steam applications have been decentralised. The fourth building has already been equipped with a modern CHP system for many years. In the future, this building will be prepared for district heating. The conversion to district heating supply will be made as soon as the CHP plant has reached the end of its operating life. In order to connect the CHT headquarters to the district heating, the municipal utilities have extended their supply network by around 570 metres during a four-month construction period. The heat now flows through newly installed transfer stations where it is measured, regulated, transferred and finally fed into the buildings' heating circuits.

Dr. Bernhard Hettich, Chief Technical Officer of CHT Germany GmbH: "As a company CHT focuses on worldwide sustainability. This not only includes products but also the sustainable use of resources at the individual locations. At our headquarters in Tübingen, our efforts are directed towards reducing energy consumption and optimising it with regard to renewable energies. With this investment we will continue to reduce CO2 emissions and the consumption of fossil fuels for the energy we consume. As a Tübingen company, we are therefore pleased to be connected to the local district heating network and to be able to use its advantages for the benefit of our sustainability strategy".

High heat demand offers great savings potential
CHT's heat requirements are high as the three buildings already connected require around 1.3 million kilowatt hours of heat per year. With the fourth building included, the heat requirement is even 1.6 million kilowatt hours. With the conversion to district heating CHT saves about 152 tons of CO2 per year. An investment in the district heating connection is therefore an investment in the future, both from an ecological and economic point of view. CHT has invested 180,000 Euro in the district heating connection.

 

Please read the attached document for more information

Source:

CHT Germany GmbH

TexCoat F4 Baldwin's revolutionizing Textile finishing system (c) Baldwin
TexCoat F4 Baldwin's revolutionizing Textile finishing system
11.03.2020

Baldwin to introduce TexCoat G4 fabric finishing system at Techtextil North America

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Non-contact precision spray technology enhances productivity, sustainability and process control

Baldwin Technology Company Inc. has announced that it will showcase the TexCoat G4 non-contact precision spray fabric finishing system at the Techtextil North America tradeshow, held from May 12 to 14, 2020, in Atlanta (booth #3048).

With extensive sustainability benefits, unprecedented tracking and process control, and industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. 

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides of the fabric. Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection.

The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption. Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.

More information:
Baldwin
Source:

Baldwin

The Archroma site in Tianjin, China, has been named ‘Green Factory’ by the Tianjin Bureau of Industry and Information Technology (c) Archroma
The Archroma site in Tianjin, China, has been named ‘Green Factory’ by the Tianjin Bureau of Industry and Information Technology
26.02.2020

ARCHROMA TIANJIN NAMED ‘GREEN FACTORY’ BY TIANJIN AUTHORITIES

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that its affiliate in Tianjin, China, has been named ‘Green Factory’ by the Tianjin authorities. The nomination was granted as of January 1st, 2020, following an evaluation process conducted under the authority of the Tianjin Bureau of Industry and Information Technology, which selected 56 other companies only to receive that same distinction.

The ‘Green Factory’ list comprises companies comprehensively evaluated and scored against 92 indicators, in areas such as site intensification, production cleanliness, energy consumption efficiency, raw material recycling, environmental impact, product ecological profile, and carbon footprint. The initiative takes place in the wider framework of fostering ‘Green manufacturing’, one of the nine strategic objectives defined by the Chinese Authorities under the ‘Made in China 2025’ plan, which led to the Industrial Green Development Plan published by The Ministry of Industry And Information Technology in 2016.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that its affiliate in Tianjin, China, has been named ‘Green Factory’ by the Tianjin authorities. The nomination was granted as of January 1st, 2020, following an evaluation process conducted under the authority of the Tianjin Bureau of Industry and Information Technology, which selected 56 other companies only to receive that same distinction.

The ‘Green Factory’ list comprises companies comprehensively evaluated and scored against 92 indicators, in areas such as site intensification, production cleanliness, energy consumption efficiency, raw material recycling, environmental impact, product ecological profile, and carbon footprint. The initiative takes place in the wider framework of fostering ‘Green manufacturing’, one of the nine strategic objectives defined by the Chinese Authorities under the ‘Made in China 2025’ plan, which led to the Industrial Green Development Plan published by The Ministry of Industry And Information Technology in 2016.

The production site in Tianjin is fully integrated into the Archroma Management System and was externally certified to ISO 9001. In the preparational system upgrade, additional external certifications to ISO 14001, ISO 50001 and OHSAS 18001 were completed in November 2019. Commitments to the United Nations Global Compact and Responsible Care® are complementing the local framework.

More information:
Archroma Green Factory
Source:

EMG for Archroma

Oerlikon Nonwoven at the INDEX in Geneva (c) Oerlikon
Oerlikon Nonwoven at the INDEX in Geneva
21.02.2020

Oerlikon Nonwoven at the INDEX in Geneva

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

More information:
Oerlikon
Source:

Oerlikon

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

(c) Oerlikon
Oerlikon zeigte Weltpremieren in China
26.11.2019

Oerlikon showed world premieres in China

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Launched to create new standards in texturing: the eAFK Evo generation of machines promises superior speeds, greater productivity and consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. Oerlikon Barmag showed these wideranging capabilities at the trade fair with a high-end design from the new system platform. In particular, the numerous value-added features include two that are excelling with cool technology: the optimized EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

Source:

Oerlikon Textile GmbH & Co. KG

12.11.2019

DyStar Exhibits Innovations at Performance Days

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar’s Cadira Reactive is a resource saving module which was first launched in 2016. The Cadira concept supports in reduction of water, waste, and energy consumption. And as another sustainable solution offering the DYCON HF series, being the most cost efficient and resource saving continuous process for cellulosics and blends with PES, PA and PU fibres.

The two-day trade fair for the functional fabrics industry highlights a wide range of solutions for Manufacturers, Brands and Retailers globally. At DyStar’s booth, we welcome you to discuss opportunities for collaborations that will help to make the industry cleaner.

More information:
DyStar Performance Days
Source:

DyStar Singapore Pte Ltd

(c) Novibra Boskovice s.r.o.
24.10.2019

Novibra at ShanghaiTex 2019

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

More information:
Novibra ShanghaiTex
Source:

Rieter Management AG

Photo: Borealis
16.10.2019

Borealis launches new BorPure™ resin at the K 2019

BorPure™ RF777MO: designed for flip-top cap applications
Borealis announces the commercial launch of BorPure™ RF777MO. Based on the proprietary Borstar® Nucleation Technology (BNT), this new resin fulfils value chain demand for high-quality solutions offering excellent organoleptics. As next generation random polypropylene (PP), BorPure RF777MO has been designed for use in flip-top caps, a growing caps and closures market segment.

Next generation random PP offers excellent organoleptics
The rapidly evolving caps and closures industry must respond to a broad and diverse set of requirements from all sides. Converters demand innovative material solutions that reduce energy consumption and help increase productivity on injection moulding lines. Resins must offer easy processability, consistency, high quality, and provide optimal performance on the capping line. For brand owners and final consumers, caps and closures must secure package contents, provide ideal organoleptic properties, safety, and convenience. They must also stand out on the retail shelf and, increasingly, offer the lowest possible environmental footprint.

BorPure™ RF777MO: designed for flip-top cap applications
Borealis announces the commercial launch of BorPure™ RF777MO. Based on the proprietary Borstar® Nucleation Technology (BNT), this new resin fulfils value chain demand for high-quality solutions offering excellent organoleptics. As next generation random polypropylene (PP), BorPure RF777MO has been designed for use in flip-top caps, a growing caps and closures market segment.

Next generation random PP offers excellent organoleptics
The rapidly evolving caps and closures industry must respond to a broad and diverse set of requirements from all sides. Converters demand innovative material solutions that reduce energy consumption and help increase productivity on injection moulding lines. Resins must offer easy processability, consistency, high quality, and provide optimal performance on the capping line. For brand owners and final consumers, caps and closures must secure package contents, provide ideal organoleptic properties, safety, and convenience. They must also stand out on the retail shelf and, increasingly, offer the lowest possible environmental footprint.

More information:
Borealis
Source:

Borealis AG

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019 (c) Saurer AG
FusionTwister for staple fibre yarns
26.09.2019

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.

Archroma: New Formaldehyde-Free* Low Temperature Curing Binder © Archroma
Screen capture of Archroma’s video on Archroma's Cool Print system based on the new Helizarin® LTC New, a formaldehyde-free* low temperature curing liquid binder for pigment printing on all kinds of fibers.
22.07.2019

Archroma: New Formaldehyde-Free* Low Temperature Curing Binder

  • For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

  • For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”
 

More information:
Archroma Helizarin Farben
Source:

EMG

(c) A. Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Further benefits and savings with the new Monforts MonforClean

A. Monforts Textilmaschinen GmbH & Co. KG presented an energy-optimised new version of its industry-leading Montex stenter for the first time at ITMA 2019 in Barcelona from June 20-26th.

With the introduction of the new MonforClean exhaust air treatment system and other unique process innovations, Monforts has been able to further reduce the energy consumption of Montex stenters by a further 13%.

Exhaust air treatment on stenter frames has posed particular challenges over the years, since the air can contain significant amounts of oil, fibre and even wax particles that may see emissions limits being reached in the processing of certain fabrics, depending on the legal specifications.

In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. At the same time, the costs for laborious secondary installations and the piping of the exhaust air treatment components, as well as supporting structures are eliminated due to the machine configuration.

A. Monforts Textilmaschinen GmbH & Co. KG presented an energy-optimised new version of its industry-leading Montex stenter for the first time at ITMA 2019 in Barcelona from June 20-26th.

With the introduction of the new MonforClean exhaust air treatment system and other unique process innovations, Monforts has been able to further reduce the energy consumption of Montex stenters by a further 13%.

Exhaust air treatment on stenter frames has posed particular challenges over the years, since the air can contain significant amounts of oil, fibre and even wax particles that may see emissions limits being reached in the processing of certain fabrics, depending on the legal specifications.

In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. At the same time, the costs for laborious secondary installations and the piping of the exhaust air treatment components, as well as supporting structures are eliminated due to the machine configuration.

(c) GB Network Marketing & Communication
07.12.2018

BERTO in collaboration with BLACKHORSE LANE, EVEREST and MARCHI & FILDI presents “PIANETA”, its NEW CIRCULAR DENIM

After the second day of Denim by Premiere Vision, ECO - Collaboration between companies of the EUROPEAN DENIM VALUE CHAIN was celebrated. In order to celebrate this Premium-SUSTAINABLE DENIM FABRIC, Berto teamed up with:

  • BLACKHORSE LANE, maker and seller of ready-to-wear selvedge & organic raw denim jeans in London, with a focus on sustainability, community and unmatched quality;
  • EVEREST, Italian company which offers an innovative sustainable range of textile treatments for the fashion industry;
  • MARCHI&FILDI, spinning group located in North-Italy focused on innovation and sustainability, producer of the ECOTEC® yarns, with huge reductions on environmental impact; up to 78% in water, 56% in CO2 emissions and energy consumption. The same technology is used to produce yarns for Berto.

These companies collaborated on this exclusive project where the yarn is made through ECOTEC® System by MARCHI&FILDI, the fabric is made by BERTO, the garments are designed and made by BLACKHORSE LANE and finally washed by EVEREST.

 

After the second day of Denim by Premiere Vision, ECO - Collaboration between companies of the EUROPEAN DENIM VALUE CHAIN was celebrated. In order to celebrate this Premium-SUSTAINABLE DENIM FABRIC, Berto teamed up with:

  • BLACKHORSE LANE, maker and seller of ready-to-wear selvedge & organic raw denim jeans in London, with a focus on sustainability, community and unmatched quality;
  • EVEREST, Italian company which offers an innovative sustainable range of textile treatments for the fashion industry;
  • MARCHI&FILDI, spinning group located in North-Italy focused on innovation and sustainability, producer of the ECOTEC® yarns, with huge reductions on environmental impact; up to 78% in water, 56% in CO2 emissions and energy consumption. The same technology is used to produce yarns for Berto.

These companies collaborated on this exclusive project where the yarn is made through ECOTEC® System by MARCHI&FILDI, the fabric is made by BERTO, the garments are designed and made by BLACKHORSE LANE and finally washed by EVEREST.

 

Source:

GB Network Marketing & Communication

(c) Chomarat
05.12.2018

CHOMARAT obtains certification for environmental & energy management with ISO 14001 and ISO 50001

CHOMARAT, the specialist in composite & construction reinforcements and coated fabrics, has demonstrated the Group’s determination to pursue a sustainable process by earning environmental management (ISO 14001) and energy management (ISO 50001) certification for its French sites. “By obtaining both ISO 14001 and ISO 50001 certification, CHOMARAT now has a tested and standardized framework for developing an effective, sustainable environmental and energy management strategy,” says CHOMARAT Environment and Energy Manager Laurent VÉRITÉ.

CHOMARAT, the specialist in composite & construction reinforcements and coated fabrics, has demonstrated the Group’s determination to pursue a sustainable process by earning environmental management (ISO 14001) and energy management (ISO 50001) certification for its French sites. “By obtaining both ISO 14001 and ISO 50001 certification, CHOMARAT now has a tested and standardized framework for developing an effective, sustainable environmental and energy management strategy,” says CHOMARAT Environment and Energy Manager Laurent VÉRITÉ.

Minimizing environmental impacts & optimizing energy use
ISO 50001 certification is validation of efficient energy management, with the bonus of lower energy consumption and the tools needed to address a warming climate. ISO 14001 certification is based on standards and requirements, and it constitutes an international benchmark for environmental management systems. “CHOMARAT is committed to a responsible and sustainable process for all of its activities in France. With ISO 14001 certification, the Group is incorporating environmental requirements into its management and production systems,” explains CHOMARAT France CEO Raphaël LAURENT.

Pursuing a long-term strategy
This twofold certification is in keeping with CHOMARAT’s long-term vision. “Our strategy is implemented through new investments and international development. But the Group is also actively involved in sustainable development and a sustainable innovation initiative,” explains Raphaël LAURENT. Measures that have been implemented include reducing the noise level, preventing pollution risks and improving waste management. Fluorescent lighting has been replaced by LEDs; new, more energy-efficient equipment has been installed; and the heating and air-conditioning ductwork has been insulated to reduce fuel-oil consumption.
“It is thanks to the combined efforts of all CHOMARAT’s teams that we were able to obtain these two certifications. For us, this is our first milestone towards a sustainable economy,” concludes Laurent VÉRITÉ.

More information:
CHOMARAT
Source:

Agence APOCOPE

(c) Koch Membran Systems
31.10.2018

KMS Installs PURON® PLUS Package System in Canada Featuring PULSION® MBR

Koch Membrane Systems (KMS), a global leader in the development and manufacture of membrane-based filtration technologies, announces the commissioning of a PURON® PLUS packaged MBR system in Saskatoon, a city within the province of Saskatchewan, Canada.

The PURON® PLUS system provides a compact and turnkey wastewater treatment solution that is fully automated and provides consistent high-quality effluent for safe discharge or reuse.
 
Due to Canada’s challenging climate and dispersed populations outside of city areas, simple and reliable decentralized treatment systems are often preferred to treat municipal wastewater streams. As a differentiated membrane and system provider, KMS has been selected for this project due to their ability to provide a comprehensive solution with market leading technology.
 
For this project, KMS partnered with Proteus Water Inc., a Canadian company focused on providing integrated wastewater treatment solutions for small communities.
 

Koch Membrane Systems (KMS), a global leader in the development and manufacture of membrane-based filtration technologies, announces the commissioning of a PURON® PLUS packaged MBR system in Saskatoon, a city within the province of Saskatchewan, Canada.

The PURON® PLUS system provides a compact and turnkey wastewater treatment solution that is fully automated and provides consistent high-quality effluent for safe discharge or reuse.
 
Due to Canada’s challenging climate and dispersed populations outside of city areas, simple and reliable decentralized treatment systems are often preferred to treat municipal wastewater streams. As a differentiated membrane and system provider, KMS has been selected for this project due to their ability to provide a comprehensive solution with market leading technology.
 
For this project, KMS partnered with Proteus Water Inc., a Canadian company focused on providing integrated wastewater treatment solutions for small communities.
 
“We decided to go with KMS modules due to their reliable, compact and efficient MBR solutions,” said Jason Tratch, president and CEO of Proteus Water. “Compact MBR systems are the only answer for the small municipalities in Canada, meeting the financial expectations as well as the technical challenges. The PURON® PLUS system featuring PULSION MBR membranes is here with a very promising solution due to its increased efficiency and its decreased footprint.”
 
Capable of treating an average design flow of approximately 100,000 gpd (375 m3/d) of municipal wastewater, the PURON® PLUS P-100 system selected for this project features KMS’ latest innovative and patented PULSION® MBR technology. The benefits of PULSION® MBR offer best in class reliability and productivity with the lowest energy consumption.
 
“The efficiency and the reliability of MBR systems has been proven in thousands of places all over the world and it will be the best applicable solution for the Canadian market,” said Jack Noble, general manager Water and Wastewater (EMEA) of Koch Membrane Systems.

 

(c) Itema Group
18.10.2018

Denim goes greener through the whole chain. Prosperity Textile acting as a pioneer and choosing the first sustainable innovation in the weaving industry: the brand-new iSAVER™ by Itema

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

Thanks to its partnership with Itema, Prosperity Textiles makes again a step forward in terms of sustainable innovation, as one of the first denim producers able to successfully turn - even the weaving production - green. A partnership that is planned to be showcased in some of the most important textiles exhibitions worldwide focusing on Asian and denim markets. A path that starts with KingpinsShow, Amsterdam (October 24-25) where the Chinese denim producer will put into the spotlight this brand-new solution aimed at further increasing the eco-driven approach of the company; an important appointment is also in the Itema calendar: the ITMA Asia + CITME 2018 exhibition, Shanghai (October 15-19) where the Italian company showcased the important green step-forward in denim weaving processes and the full range of its innovations.

iSAVER™: the ideal green tool for denim weaving
This new technology, developed by ItemaLab™, the Itema Advanced Innovation Department, isable to completely eliminate the left-hand weft waste, allowing to insert the weft yarns in the fabric without the need of additional yarns. iSAVER™ significantly reduces raw material waste, leading to tangible benefits in terms of machine’s efficiency, cost reduction and energy saving.

Just consider that the weaver will gain a minimum saving of € 2.000 per year per machine, and our planet will gain even more. In fact, for the first time in the weaving industry, a sustainable approach when choosing the weaving equipment is now possible. Thanks to iSAVER™, 1.000 Kg of cotton per machine per year – the 3% of the total raw materials - will be saved, thus avoiding the waste of 20 million liters of water, equivalent to 400.000 showers.

Numbers are clear: the introduction of iSAVER™ clearly sets a new benchmark in terms of sustainability within denim fabric production. Furthermore, the iSAVER™ is one of the key features of the Itema R95002denim, the rapier weaving machine born and designed to weave denim guaranteeing to weavers superior textile quality, outstanding user-friendliness and tangible energy and raw materials saving.

A joint eco-driven path
Itema, understanding very well the importance of saving resources and energy to drive the textile production in the direction of a more conscious manufacturing, focused its attention to develop breakthrough weaving solutions and in 2018 introduced to the market the iSAVER™, a revolutionary device dedicated specifically to denim fabrics able to eliminate the waste selvedge on the left-hand side of the fabric.

This is one of the reasons-why Prosperity Textiles has chosen to adopt this extraordinary technology for its new facility. Today Prosperity Textiles is one of the main denim producers worldwide, counting 1,300 employees and 20 offices worldwide. Moreover, a second state-of-theart denim mill will be inaugurated in Vietnam by the end of 2018.
What makes Prosperity able to stand out on a global scale, is not simply its products high quality but the ability to conciliate flawless denim fabric production with a sustainability-oriented mindset that permeates every stage of their textile supply chain.

Prosperity, indeed, adopted innovative green manufacturing concepts through all stages of the company’s operations, from product development, raw materials procurement and processing, to natural resources and energy utilization including waste management. Prosperity’s denim production is based on the employment of best quality yarns available on the market, while still targeting the most sustainable sources, from BCI to organic, recycled cotton, and from Tencel™ Lyocell to Sustans™, in 2017, more than 20 million yards fabric sales from Prosperity are with sustainable fibers inside.
The introduction of eco-friendly dyeing and finishing practices allows the company to create beautiful indigo shades and performance denims, with less water and energy consumption compared to the traditional systems. Last year, Prosperity produced 20% more fabrics than 2016, yet the water and electricity use and greenhouse gas emission was down by 11.5%, 7.9% and 5.4% respectively.

In this continuous process of improvement and contribution to a greener industry and planet, plays a central role the recent renewal of the historic partnership and strategic alliance with Itema – the leading manufacturer of cutting-edge weaving solutions – which represents the natural evolution of a constant process of research for partners able to support Prosperity Textiles’ growth as a sustainable company.
Up to now, all innovations and efforts done in this regard addressed the traditionally more polluting steps of the denim production. In fact, if the development of green technologies is nowadays spread in many fabric processing stages, such as finishing and dyeing, weaving was not yet capable to provide sustainable solutions to weavers.

More information:
Itema
Source:

Itema Group

DyStar Sustainability Report (c) DyStar Singapore Pte Ltd
DyStar Sustainability Report
02.10.2018

DyStar Releases Sustainability Performance Report 2017 – 2018

The DyStar Group has released its 2017 – 2018 Sustainability Performance Report. Into its eighth edition, the report marks the progress of the global company that aspires to become the world’s most sustainable and responsible supplier of colorants, specialty chemicals, and services in the textile industry, but has also embarked on the business with food dyes and chemicals through its recent acquisition in USA.
The latest DyStar’s Sustainability Performance Report is the first of their reports prepared in accordance with the most trusted and widely used reporting framework – Global Reporting Initiative (GRI) Standards: Core Option.

The 2020 Target
2017 marks the seventh year of DyStar’s journey towards reducing the production footprint by 20% for every ton of production by the year 2020. This goal encompasses the resources used for production including energy, water, and raw materials as well as addresses their corresponding outputs – greenhouse gas (GHG) emissions, waste and wastewater. Results across most key performance indicators were positive, with four of the six 2020 targets being successfully met or surpassed.

The DyStar Group has released its 2017 – 2018 Sustainability Performance Report. Into its eighth edition, the report marks the progress of the global company that aspires to become the world’s most sustainable and responsible supplier of colorants, specialty chemicals, and services in the textile industry, but has also embarked on the business with food dyes and chemicals through its recent acquisition in USA.
The latest DyStar’s Sustainability Performance Report is the first of their reports prepared in accordance with the most trusted and widely used reporting framework – Global Reporting Initiative (GRI) Standards: Core Option.

The 2020 Target
2017 marks the seventh year of DyStar’s journey towards reducing the production footprint by 20% for every ton of production by the year 2020. This goal encompasses the resources used for production including energy, water, and raw materials as well as addresses their corresponding outputs – greenhouse gas (GHG) emissions, waste and wastewater. Results across most key performance indicators were positive, with four of the six 2020 targets being successfully met or surpassed.
In terms of the energy consumption and GHG emission, DyStar is farther from its original desired target primarily due to the impacts from three newly acquired production sites. However, intensive efforts are underway to ensure that the company’s less efficient acquisitions are provided the essential support to align with the rest of the company. DyStar is optimistic that all six targets are achievable by 2020.

Creating Responsible Products & Services
As part of DyStar’s long-term goal to imbed sustainability across the industry, they will also be focusing on expanding its sustainability services. This includes the opening of more Texanlab offices, an ISO 17025 certified, specialized testing laboratory across South Asia to provide end-to-end solutions throughout the whole supply chain.

Stepping Up on Cooperation with NGOs
Increasingly, DyStar is strengthening their partnerships with the Non-Governmental Organizations (NGOs). The 2017 report features an in-depth guest interview with the NGO China Water Risk, on how can suppliers like DyStar can be a role model in creating sustainable fashion.
To encourage and facilitate sustainable practices among its suppliers, DyStar also conducts sustainability-related supplier surveys. For instance, DyStar is cooperating with the Institute of Public & Environmental Affairs (IPE), one of the most established Chinese NGO, to expand the framework of their supplier questionnaire. In recognition of its efforts, DyStar received top ranking in the CITI transparency list for industrial chemicals from IPE, placing them well ahead of many other industry peers.

Embracing Diversity, Engaging Communities
Also, to help meet clients’ demand and demonstrate its responsibility and care in the food and beverages industry, DyStar is implementing a supplier diversity program to support businesses in the USA that are at least 51% owned by minority groups, women, veterans and people with disabilities.
Highlighting DyStar’s commitment to the communities they operate in, the company encourages volunteerism among employees, and for the year of 2017, DyStar employees devoted a total of 205 volunteer hours towards community projects, which also served as a meaningful collective experience for employees to form closer bonds.

Working Together Towards Long-Term Solutions
As an industry frontrunner, DyStar and its leaders are committed to driving sustainability across the
industry. However, significant challenges remain, and the stakeholders of this industry need to work together to derive long-term solutions. CEO of DyStar Group, Mr. Eric Hopmann emphasized, “It is imperative for the entire industry to improve collectively, not individually, and our ability to do so may determine the long-term profitability of the industry as a whole. It is my belief that effective partnerships coupled with stronger support and incentivization from leading companies within this industry could be key to creating a new – and much needed – equilibrium.”

To access DyStar’s sustainability reports, visit http://www.dystar.com/sustainability-reports/.

Source:

DyStar Singapore Pte Ltd