From the Sector

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

Michelman, a global developer and manufacturer of environmentally friendly advanced materials, including sizing for glass and carbon fiber, has invested in the FIMATEST adhesion measurement system to ensure their sizing solutions continue to contribute to enhanced performance of composite parts.

“As we continue our vision to be the interface expert, it is critical to have analytical equipment that can efficiently fine-tune our sizing to optimize adhesion properties. This is one of the key performance attributes we provide our customers, and the fact that the Textechno FIMATEST system works according to the fiber pull-out principle makes it extremely valuable”, explains Steve Bassetti, Michelman’s Global Marketing Director for Industrial Manufacturing. “We have utilized this equipment in our development lab for almost two years, and it is suited for any fiber-matrix combination we have developed. It has been helpful that Textechno developed these instruments because they are, and will continue to be, a great benefit to the entire Composites industry. We look forward to supporting Textechno in establishing more standardization for the Industry regarding fiber-matrix-adhesion and processing properties.“

Dr. Ulrich Mörschel, CEO of Textechno, added: “We are proud that Michelman, the industry’s leading interface expert, invested in our testing system.” Bassetti further elaborated on the system’s benefits: “For Michelman’s customers, this equipment has allowed for great collaboration, increased screening of sizing concepts, and a more robust and efficient product development process.”

Chomarat, a leader in technical textiles and composite reinforcements, is developing its Coatings & Films business at its French sites. The Group has just acquired an extruder and a graining line to increase its production capacities and develop new, more efficient solutions, particularly in the field of TPO (polyolefin thermoplastics). These two technological investments are part of the €35 million investment plan announced by the Group in mid-2017.

AN EXPANDED OFFER WITH THE NEW GRAINING LINE
The graining line gives texture to the coated textile and provides a differentiation of appearance or a functionalization, such as non-slip or durability. "We will use this new technology to broaden the scope of material we process (including the production of TPO sheets with or without backing), and to improve the perceived quality by a better grain definition," explains Philippe Chomarat, Director of the Coatings & Films business at Chomarat. This technological investment enables the Group to increase its production capacities and offer new solutions for the automotive and luxury bag markets.

INCREASING PERFORMANCE WITH THE NEW EXTRUDER
The new extruder increases the Chomarat production capacity for coated textiles and allows production in larger widths. The technology consumes less energy and emits very low level of VOCs, in line with the Group's sustainable approach. It also supplements existing solutions for developing biosourced coated fabrics. "This is a strategic investment for Chomarat, as in addition to PVC, we will be able to work with new materials such as TPO, TPU and new biosourced materials. We will offer innovative solutions for all our markets—pipes, luxury bag, automotive and protection," concludes Philippe Chomarat.

• Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
• Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
• UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

• HUB 1922, the fashion division of the RUDOLF GROUP, takes the stage at the Kingpins Show in Amsterdam and presents new technologies that make it possible to move away from environmentally questionable industrial practices.
• HUB 1922 also announces the opening of the new company building in an ancient textile factory near Milan.

Amsterdam/Geretsried/Milan. It was only six months ago that the RUDOLF GROUP, with its fashion Division named HUB 1922, began its journey through the fascinating world of garment finishing. Since then, the team has made significant progress and has moved from being a newcomer to the business to a solid and reliable reality. “HUB 1922 introduces the Rudolf Group to design thinking,” says Alberto De Conti, Head of Fashion Division at Rudolf Group. “And when you break perceived restrictions and paradigms within a strongly science-driven organization, only sky is the limit.”

For an entire semester, the organisation remained focused on one, single goal without getting distracted from it: to become the partner of choice for environmentally conscious advancements in garment processing that are rooted in real experience and science.

Emphasis was put on listening attentively to the market and on engineering solutions proactively, without being prompted.
When it comes to Denim, two separate yet correlated calls for action were heard:
1. the need for a serious departure from established industrial practices that are environmentally questionable
2. the opportunity to change the current rules and stir toward enhanced product quality.

Departure from the environmentally questionable

• HypNO: The next generation of bleach

Many attempts to technical alternatives to local and total denim bleaching have been launched in the market, over the past five years, by a number of competing players. Originality and innovation are at the base of HypNO technical uniqueness that can be injected into traditional denim processing, but that can also be used to create whole new processes and aesthetics.
Birth child of relentless dedication to science, HypNO is the latest alternative to the traditional denim bleaching agents currently under the spotlight because of their alleged safety issues. HypNO is the next generation of bleach.

- HypNO is based on the application of a whole new family of RUCORIT compounds, which are halogene-free and heavy metal-free
- HypNO can replace both potassium permanganate and sodium hypochlorite with one more eco-friendly solution
- HypNO is free from unpleasant smells; it is production friendly and suitable for both spray and bath applications
- HypNO does not require neutralisation with agents such as sodium metabisulphite or peroxides, hence reducing the need for chemicals significantly
- HypNO is GOTS approved. Bluesign and ZDHC Chemical Gateway certifications are intended
- HypNO further helps in the elimination of pumice stones
- HypNO is highly efficient and has been engineered to be cost competitive compared to other existing bleaching solutions

Toward enhanced product quality

• SoSoft, RawLong, DuraBlue

Durability over time still builds a brands’ reputation for quality. The notion of “durability” has changed over the years and has moved from sturdy workwear to the product's ability to retain its characteristics and structural properties.

“It goes against the whole denim philosophy, but, jeans are increasingly bought for what they look like at the time of purchase and are expected to evolve as little as possible. It is what it is; you can’t argue with consumers” says De Conti.

SoSoft, RawLong, DuraBlue, the three new technical concepts launched at Kingpins Amsterdam by the RUDOLF GROUP all sit under the umbrella wings of enhanced quality and specifically address long-lasting softness, preservation of original look and depth of blue.

• SoSoft

All appreciate the softness and suppleness of used/worn denim and the comfort benefit it delivers. It is a generic denim truth, and it is even stronger when it can extend over time. SoSsoft is about softeners carefully engineered for an enduring emotion, one that lives along favourite clothes.

Tried and tested to over 15 home washes, these marvels of chemical engineering allow consumers to toss domestic fabric softeners to the benefit of environmental sustainability.

• RawLong

Denim lovers want raw jeans to fade with time, soften and transform into what feels like an extension of their body. More often, people just want to prolong the look they chose. In both cases, home washing is a headache.

Years of testing have identified RawLong innovative, highly durable and natural solution that keep wearers fresh and at ease in their jeans allowing for long-wearing without washing. Moreover, less home washing means much less impact on the environment.

• DuraBlue

The role of designers is to come up with the bluest of blue jeans in a spectrum of fantastic new blue finishes and supporting textures. The role of DuraBlue is to ensure a continuously updated collection of technical solutions that keep that rich, deep, dark blueness of jeans for much longer while limiting the quality issues that come with denim rubbing. In other words, light underwear, snowy shoes, and white sofas no longer live in fear.

The launch of HUB 1922

• Busto Arsizio, Italy.

On a discreet street of Busto Arsizio, a village at the North of Milan is a red-brick building which in the 1800’s was the house of a textile mill. This 150-year-old structure is where the RUDOLF GROUP, the 100-year-old leader of textile, functional, responsible chemistry, is about to open its Fashion Division. Or, better, it’s HUB 1922.

HUB 1922 is committed to research and develop innovation within garment processing for the privately held mother company. HUB 1922, whose doors are expected to open during fourth quarter of 2018, will foster collaborative efforts with international fashion brands and retailers, will provide product innovation ideas at the crossroad of fashion and utilitarian functionality and will introduce elements of unorthodox diversity rooted in deep scientific knowledge, true environmental responsibility, technical innovation and creativity. “At a time when science plays such a powerful role in the life of society, it is incumbent on fashion to be dealing with scientific research. HUB 1922 facilitates that reunion” concludes De Conti.

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

“Choose the original - Choose success" is the message of the VDMA Textile Machinery at this trade fair. On the occasion of the VDMA press conference on the opening day of ITMA ASIA, Ms Karin Christine Schmidt, Technical Director VDMA Textile Machinery, emphasised: “Copycat machines may look similar to the systems they are designed to emulate. But only originals do not simply follow but are pacesetters of technological progress.” Original technology is a keystone of innovation. It has the potential to successfully turn visions of entirely new possibilities in the textile production into reality.

This approach is visualised at the VDMA booth. The stand achieves attention and emotion through the picture motif: Neuschwanstein Castle. This world-famous tourist magnet is more than that: it is also a successful original. A vision, which could be successfully implemented in the long term through innovation and technology!

During the press conference, 18 spokespersons of renowned VDMA member companies showed how original technology can indeed play a major role in China’s and other Asian nation’s efforts to increase the resource efficiency of the textile industry and to interconnect information technology and manufacturing processes.  

Topics of the companies included automation, performance improvement, quality, sustainable solutions (raw material, energy, water saving), Industry 4.0 (in China called intelligent manufacturing), digital AR/VR services, platforms and software.

You are welcome to explore the speakers' statements in the atached PDF.

The DyStar Group has released its 2017 – 2018 Sustainability Performance Report. Into its eighth edition, the report marks the progress of the global company that aspires to become the world’s most sustainable and responsible supplier of colorants, specialty chemicals, and services in the textile industry, but has also embarked on the business with food dyes and chemicals through its recent acquisition in USA.
The latest DyStar’s Sustainability Performance Report is the first of their reports prepared in accordance with the most trusted and widely used reporting framework – Global Reporting Initiative (GRI) Standards: Core Option.

The 2020 Target
2017 marks the seventh year of DyStar’s journey towards reducing the production footprint by 20% for every ton of production by the year 2020. This goal encompasses the resources used for production including energy, water, and raw materials as well as addresses their corresponding outputs – greenhouse gas (GHG) emissions, waste and wastewater. Results across most key performance indicators were positive, with four of the six 2020 targets being successfully met or surpassed.
In terms of the energy consumption and GHG emission, DyStar is farther from its original desired target primarily due to the impacts from three newly acquired production sites. However, intensive efforts are underway to ensure that the company’s less efficient acquisitions are provided the essential support to align with the rest of the company. DyStar is optimistic that all six targets are achievable by 2020.

Creating Responsible Products & Services
As part of DyStar’s long-term goal to imbed sustainability across the industry, they will also be focusing on expanding its sustainability services. This includes the opening of more Texanlab offices, an ISO 17025 certified, specialized testing laboratory across South Asia to provide end-to-end solutions throughout the whole supply chain.

Stepping Up on Cooperation with NGOs
Increasingly, DyStar is strengthening their partnerships with the Non-Governmental Organizations (NGOs). The 2017 report features an in-depth guest interview with the NGO China Water Risk, on how can suppliers like DyStar can be a role model in creating sustainable fashion.
To encourage and facilitate sustainable practices among its suppliers, DyStar also conducts sustainability-related supplier surveys. For instance, DyStar is cooperating with the Institute of Public & Environmental Affairs (IPE), one of the most established Chinese NGO, to expand the framework of their supplier questionnaire. In recognition of its efforts, DyStar received top ranking in the CITI transparency list for industrial chemicals from IPE, placing them well ahead of many other industry peers.

Embracing Diversity, Engaging Communities
Also, to help meet clients’ demand and demonstrate its responsibility and care in the food and beverages industry, DyStar is implementing a supplier diversity program to support businesses in the USA that are at least 51% owned by minority groups, women, veterans and people with disabilities.
Highlighting DyStar’s commitment to the communities they operate in, the company encourages volunteerism among employees, and for the year of 2017, DyStar employees devoted a total of 205 volunteer hours towards community projects, which also served as a meaningful collective experience for employees to form closer bonds.

Working Together Towards Long-Term Solutions
As an industry frontrunner, DyStar and its leaders are committed to driving sustainability across the
industry. However, significant challenges remain, and the stakeholders of this industry need to work together to derive long-term solutions. CEO of DyStar Group, Mr. Eric Hopmann emphasized, “It is imperative for the entire industry to improve collectively, not individually, and our ability to do so may determine the long-term profitability of the industry as a whole. It is my belief that effective partnerships coupled with stronger support and incentivization from leading companies within this industry could be key to creating a new – and much needed – equilibrium.”

To access DyStar’s sustainability reports, visit http://www.dystar.com/sustainability-reports/.

• Product innovations, thought-leadership and the new certifications.
• A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

In partnership with Alliance for Responsible Denim for the “Doctor Visits” workshop
On June 12, in London, the stage was set for “Doctor Visits” an event-workshop organized by Alliance for Responsible Denim focusing on the dissemination and promotion of best practices for sustainable manufacturing. The meeting was dedicated to six selected denim brands, which had a chance to meet the greatest experts in the finishing of indigo fabric.

Garmon Chemicals made available its inimitable experience as technical partner for finishing, as well as conducting team sessions with the Jeanologia staff, a leading company for eco-sustainable technological solutions. The six brands brought the finishing recipes of their Never out of Stock styles, to receive support and recommendations from the experts about the most innovative alternatives in terms of sustainability. The goal was to show the brands new possibilities to migrate towards more responsible finishing, improving their recipes as well. This was a way to reaffirm how ecodriven innovations can also increase finished product quality.
 
The new ISO certifications: increasingly high standards
Garmon Chemicals is also pleased to announce that it has been awarded two important certifications for compliance with ISO international standards as regards safety, reliability and quality. Reference is made here to ISO 9001:2015, a certification which sets international criteria for quality management systems, and most notably, to ISO 14001:2015, a standard acknowledged worldwide stipulating all requirements for an environmental management system. This certification, in particular, helps organizations improve their environmental management performance levels through a more efficient use of resources as well as by reducing production waste. Indeed ISO 14001:2015 mandates that an organization should take into account all aspects relevant to its core business. Amongst assessed parameters there are: air pollution, managing water resources and discharge, waste management, soil contamination, mitigation and adjustment to climate change, as well as an efficient use of resources.

These certifications, once again, provide evidence of the constant commitment on the part of Garmon for an increasingly sustainable use of chemicals, aimed at truly reducing its impact on humans and the environment.
    
A commitment which comes to life in the new “Stretch Care” collection
Introduced on the occasion of the Kingpins exhibition in April 2018, the new “Stretch Care” collection is a line of products completely dedicated to enhancing the qualities and performance of stretch fabrics. The special formulations developed for this line, with their cutting-edge raw materials, are especially suited for treatments with a high eco-compatibility rate; at the same time they optimize the production process. It is worth mentioning in particular the innovative Geopower NPS (= no pumice stone), a compound which helps eliminate pumice stone from denim washings, thus reducing environmental costs and impacts. Another ground-breaking product is Avol Oxy White, the innovative bleaching agent designed to achieve localized effects on denim. Thanks to its composition it is an ecologically advanced product whose environmental impact has been reduced to a minimum, a real challenge to the use of potassium permanganate which tends to be pervasively used as part of industrial processes.

“We firmly believe in developing sustainable chemistry” – concludes Donald Mulazzani, Marketing and Business Development Director at Garmon Chemicals – “not only in terms of product, but also as evidence of our responsible approach on several levels. In this way, we want to contribute to disseminating what will need to be the best practices in the future, for the whole industry”.