From the Sector

Reset
177 results
(c) Fraunhofer UMSICHT/Mike Henning
Prof. Christian Doetsch (l.) and Prof. Manfred Renner (r.)
09.08.2022

Fraunhofer UMSICHT: New institute directors

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner holds a doctorate in mechanical engineering, specializing in process engineering and business development. Since 2006, he has held various roles at Fraunhofer UMSICHT, most recently heading up the Products division and overseeing its 126 employees and its budget of 14.8 million euros. He has set international standards through his award-winning research into a free of water tanning leather tanning process that uses compressed carbon dioxide. With the development of innovative aerogel-based insulation materials for building facades, he has made a significant contribution to environmentally friendly, circular applications in the construction industry and initiated a number of industrial projects. One of the notable technological breakthroughs made by his team was the development of a new type of fire-resistant glass, which can withstand even the most extreme heat. This won his development team the Joseph von Fraunhofer Prize in October 2020.

Alongside becoming institute director, Prof. Renner will also take over the leadership of the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in August 2022. In this role, he will represent the Fraunhofer-Gesellschaft on a national and international level with regard to the transformation of industry and society to a circular economy. In addition, he will start his professorship in Responsible Process Engineering at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. Over the course of his professorship, he will shape the systemic development of the circular economy at a corporate, regional and European level.

Prof. Christian Doetsch has worked in energy research for more than 25 years, spending most of this time at Fraunhofer UMSICHT. As head of the Energy division, he managed a team of around 145 employees and was responsible for a budget of approximately 10.4 million euros. His technological focal points are energy storage, Power-to-X technologies including hydrogen electrolysis and chemical conversion, catalysts, and energy system modeling and optimization. His overarching aim is the integration of renewable energies into a cross-sectoral, resilient energy system.

In 2015, Doetsch co-founded the award-winning start-up Volterion GmbH & Co. KG, which develops redox flow batteries. He attained high visibility on a global scale by redesigning stacks, one of the main components of redox flow batteries, an achievement for which he, his team and Volterion representatives were awarded the Joseph von Fraunhofer Prize in May 2021. The energy expert also acts as deputy spokesperson for the Fraunhofer Energy Alliance and task manager for the energy storage group at the International Energy Agency (IEA). He also co-founded the “Open District Hub e. V.,” an association that promotes the energy transition in the sector by means of energy systems integration.

Since January 2020, he has been Professor of Cross Energy Systems at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. In this role, he conducts research into ecological evaluation and resilience of cross-sectoral energy systems.

Source:

Fraunhofer UMSICHT

08.08.2022

Mahlo at Febratex

Brazil hosts all industries needed for textile and garment production - from fiber to final production. This is why Mahlo, with its diverse solutions on straightening technology and process control, will exhibit at Febratex, held on August 23-26 in Blumenau.

"No matter what products they make, all producers have the same goals at the end of the day," says Area Sales Manager Miguel Lessel. "High-quality goods without distortion and optimized processes that combine quality and economy.

The automatic straightening system of the world market leader ensures thread-straight fabric in almost all applications. The modular system can be adapted to individual production conditions. To optimize the processes around the stenter frame, Mahlo offers various process control systems. These can be used, for example, to measure and control critical parameters such as dwell time, thread density or residual moisture. These systems not only help to improve the quality of the textiles, but also to save raw materials and reduce energy costs.

Brazil hosts all industries needed for textile and garment production - from fiber to final production. This is why Mahlo, with its diverse solutions on straightening technology and process control, will exhibit at Febratex, held on August 23-26 in Blumenau.

"No matter what products they make, all producers have the same goals at the end of the day," says Area Sales Manager Miguel Lessel. "High-quality goods without distortion and optimized processes that combine quality and economy.

The automatic straightening system of the world market leader ensures thread-straight fabric in almost all applications. The modular system can be adapted to individual production conditions. To optimize the processes around the stenter frame, Mahlo offers various process control systems. These can be used, for example, to measure and control critical parameters such as dwell time, thread density or residual moisture. These systems not only help to improve the quality of the textiles, but also to save raw materials and reduce energy costs.

Source:

Mahlo GmbH + Co. KG

(c) Oerlikon
The Oerlikon Barmag eccentric screw pump
02.06.2022

Oerlikon Barmag presents innovations at the ACHEMA 2022

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Eccentric screw pumps – robust all-rounders convey any medium
The requirements for pumps are considerable, as the demand for customized solutions for increasingly complex processes is rising. This is particularly true for Oerlikon Barmag’s new eccentric screw pump range. High wear-resistance, increased durability and robust operation – the new pump is tailor-made for conveying highly-filled, high-viscosity and abrasive media, such as filled adhesives, filled silicones and filled casting compounds, for example. The is the multi-stage seal system, which considerably increases the pump’s lifespan. The upstream shaft sealing ring protects the slide ring seal against excessively-fast wear caused by challenging media. In turn, the optimum alignment of the drive shaft – ball bearing-supported and centrally-guided through the shaft sealing ring – prevents any metal debris caused by friction and hence ensures considerably greater durability. Producers benefit from considerably greater productivity, as the pumps’ maintenance intervals and hence machine downtimes are significantly reduced.

New pump for shear-sensitive materials
For increasingly complex customer-specific process solutions, Oerlikon Barmag is now expanding its GA series, developed especially for the challenging conveying of high-viscosity media, to include the GAB51F for shear-sensitive conveying media. The newly-developed pump with its viscosity range of max. 300 Pas is tailored to conveying high-viscosity, shear-sensitive materials such as adhesives and silicones, for example. “The shear forces impacting the medium within the pump are reduced to a minimum as a result of a specially geometry”, explains Thorsten Wagener, Senior Sales Manager within the Pump Construction business unit. The material is conveyed through the pump in an as gentle and low-pulsation manner as possible and metered precisely at the outlet – ensuring it retains its characteristic properties.

High-speed metering pump with sealed product space
The high-speed metering pump has been especially developed for metering poorly-lubricating media. Here, the main benefit is the sealed product space, which extends the pump’s lifespan considerably. The space that comes into contact with the media is limited to the area around the gears. “As a result, the high-speed pump is particularly suited for applications in the chemicals industry, which frequently involve aggressive acids”, comments Thorsten Wagener.

GM series for low-viscosity media
The pumps in the GM and GA series provide precision metering with low-pulsation feeding of the conveying medium. The multi-stage GM pump conveys low-viscosity media (i.e. 250 bar, 100 mPas) even under high pressure and in the most challenging conditions. The square design from the proven GM series is the standard pump for many metering tasks. The development of the multi-stage pump expands the applications range for the GM series considerably. The round 2-stage GM pump has been developed especially for use in high-pressure technology. It masters the particular challenge of conveying small throughputs with low viscosities. The pump is perfect for 0.05 through 20 cm³/rev feed sizes and is excellently suited for use in high-pressure machines for PUR molded parts, foam slab stock, refrigeration unit insulations and sandwich panels, for example.

GA series pumps for high-viscosity media
The Oerlikon Barmag GA range has been especially developed for the challenging conveying of media with higher viscosities. The GA series pumps are available for conveying volumes of between 1.25 and -30 cm³/rev (0.6-144 l/h). They have been designed for pressures of up to 200 bar, for viscosities of up to 1.500 Pas as well as for temperatures of up to max. 225 °C. With this range of pumps, Oerlikon Barmag offers its customers tailor-made solutions for many technical processes in which high-precision and even metering is of paramount importance.

The drum pump – conveying and metering using a single unit
With the drum pump, the Oerlikon Barmag pump specialists have created a pump designed specifically for conveying and metering high-viscosity materials such as adhesives, silicones and other high-viscosity materials from drums and other large containers and for pressures of up to 250 bar. Its special features not only include the fact that it removes high-viscosity materials from the drum, but that it also meters the medium directly without any additional interim stops.

Source:

Oerlikon

At STOLL, innovations and optimizations go hand in hand (c) STOLL
The new STOLL customer centre in Reutlingen
11.05.2022

At STOLL, innovations and optimizations go hand in hand

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

Detail optimisations for more overall performance
The innovation packages have the benefits for customers in focus and were tailored to the respective target groups. Every optimization contained therein leads to a decisive improvement in production. All of the solutions developed can be easily integrated into existing STOLL machines.  

Innovation package Number One
Innovation package Number One will be launched on the market in a few weeks' time and is aimed explicitly at knitters who focus on technical textiles. The focus is on convenience and process acceleration. Simple network configuration, expansion of the number of NP values, extended functionality when loading and saving the pattern and also improvement of handling in connection with Production Management from PPS are just some of the features of the package. "The corresponding updates for the machine control system are available to our customers for download free of charge on Customer_Net. In the future, there will also be a cloud-based offering," explains Erhard Vöhringer.

Innovation package Number Two
Still in the pipeline, included in the Number Two innovation package, are improvements for the maintenance area – regarding the use of lubricants and the maintenance intervals (predictive maintenance) – as well as optimizations in terms of sustainability, for example when it comes to reducing consumption of oil and increasing reliability. These solutions will be suitable for all machine types and applications.
The focus here is on improvements in belt take-down, the import and export of data and support for additional storage feeders.
A physical improvement in handling is promised by the new lighting including mirror directly on the machine.
In addition, the development teams are currently working on optimizing various knitting qualities and increasing user-friendliness. So you can already be curious!

Concentrated innovative power
The STOLL development team, with several hundred engineers and technicians in the fields of electronics, software, patterning, and design, never runs out of topics. Questions like "What is the market looking for? What do customers want?  Which changes do the machines have to meet and which ones do the software control and design program have to meet?" are first discussed, evaluated and debated together as a team and then go into the development phase. "Our customers can be absolutely sure that all our innovations are meticulously tested before we go to market with them" emphasizes Erhard Vöhringer. This also applies to the solutions in the innovation packages.

Small solutions, big impact
STOLL flat knitting machines impress with their great application and production potential. Almost 150 years of extensive practical experience in flat knitting technology - the STOLL company was founded in 1873 - is unique in the industry. As a Business Unit of the KARL MAYER Group, STOLL continues to do everything in its power to inspire its customers with innovative strength. Productive, flexible and reliable - simply STOLL! This slogan has not lost any of its meaning today. Quite the contrary: With the new innovation packages, customers benefit not only from the latest high-tech flat knitting machines, but also from an always up-to-date performance upgrade of their existing machine park.
With its innovation packages, STOLL has found a flexible and very fast way directly to the customer. Anyone who wants to know more about this is cordially invited to this year's trade fairs. STOLL looks forward to seeing you at the KARL MAYER Group stand at ITM (Istanbul), Techtextil (Frankfurt), Techtextil India (Mumbai) and ITMA ASIA. (Shanghai).

More information:
Stoll Karl Mayer Gruppe
Source:

KARL MAYER Verwaltungsgesellschaft mbH

Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  (c) EFI
EFI Fiery®
04.05.2022

Konica Minolta and EFI Fiery New Launch

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

Source:

EFI GmbH

Dana Rastocna-Illova is the new OETI Country Manager in the Czech Republic (c) OETI
Dana Rastocna-Illova
04.05.2022

New OETI Country Manager in the Czech Republic

  • Ms Dana Rastocna-Illova (Cert. Eng., PhD) took on the role of OETI Country Manager in the Czech Republic in April 2022.

Her main tasks include customer service and the expansion of the customer structure in the Czech Republic. In addition, she will be responsible for conducting the STANDARD 100 by OEKO-TEX® on-site visits.

Dana Rastocna-Illova holds a doctorate from the Slovak University of Technology in Bratislava and has been working in the textile industry for almost 25 years – about 20 of them in management positions. She also has many years of in-depth experience in the field of OEKO-TEX® certifications.

  • Ms Dana Rastocna-Illova (Cert. Eng., PhD) took on the role of OETI Country Manager in the Czech Republic in April 2022.

Her main tasks include customer service and the expansion of the customer structure in the Czech Republic. In addition, she will be responsible for conducting the STANDARD 100 by OEKO-TEX® on-site visits.

Dana Rastocna-Illova holds a doctorate from the Slovak University of Technology in Bratislava and has been working in the textile industry for almost 25 years – about 20 of them in management positions. She also has many years of in-depth experience in the field of OEKO-TEX® certifications.

Source:

OETI

Photo: Ralph Koch for Mayer & Cie.
29.04.2022

Mayer & Cie. at the ITM

  • Turkish circular knitting market offers prospects in turbulent times

After a four-year, Covid-related break the German circular knitting machine manufacturer Mayer & Cie. is exhibiting with its Turkish representative Mayer Mümessillik (MMÜ) once more at the important International Textile Machinery Exhibition (ITM) in Istanbul. At Booth 713 in Hall 8, Mayer & Cie. will present three machines: the D4-2.2 X interlock machine, the OV 3.2 QCe for double jersey structures and the MV 4 3.2 II for single jersey fabrics. For the Mayer & Cie. and MMÜ team the focus will be on in-person contacts with customers, suppliers and partners. Despite the tense international situation both the manufacturer and its representative are positive about the medium-term outlook for the Turkish market.

  • Turkish circular knitting market offers prospects in turbulent times

After a four-year, Covid-related break the German circular knitting machine manufacturer Mayer & Cie. is exhibiting with its Turkish representative Mayer Mümessillik (MMÜ) once more at the important International Textile Machinery Exhibition (ITM) in Istanbul. At Booth 713 in Hall 8, Mayer & Cie. will present three machines: the D4-2.2 X interlock machine, the OV 3.2 QCe for double jersey structures and the MV 4 3.2 II for single jersey fabrics. For the Mayer & Cie. and MMÜ team the focus will be on in-person contacts with customers, suppliers and partners. Despite the tense international situation both the manufacturer and its representative are positive about the medium-term outlook for the Turkish market.

Turkey is a market with prospects
“The challenges that the global economy faces are at present enormously wide-ranging, of course,” says Mayer & Cie.’s Turkey specialist Stefan Bühler. “The Russian invasion of the Ukraine, supply chain outages, shortages of raw materials and skyrocketing energy prices all create uncertainty.” And then there is galloping inflation in Turkey and elections in 2023. Yet despite, and in part because of, this state of affairs Bühler and Kahraman Güveri, CEO of Mayer & Cie.’s Turkish representative MMÜ, hold a positive view of the market outlook for the years ahead. Large orders, especially for standard products, are on the increase, Kahraman Güveri explains. That leads to new investments, new companies and a growing demand for refurbished machines that then need to be replaced by new machines elsewhere. And former commission merchants are now enterprises in their own right.

“Apart from that, Turkey benefits from its proximity to Europe, transport routes are manageable,” says Stefan Bühler. “This location advantage attracts brand manufacturers who together with their orders bring new approaches, new designs and new technologies into the country.” And Turkey’s already very highly developed textiles sector benefits too. That, says Kahraman Güveri, is why one can be confident for the next few years, “at least for as long as nothing unforeseen happens”.

Established machines with that something special: OV 3.2 QCe for double jersey structures
The portfolio of machines that Mayer & Cie. is exhibiting at the ITM is tried, trusted and popular. The OV 3.2 QCe is a specialist for interlock fabrics and double jersey structures that it knits in both filament and synthetic fibre yarns. With a conversion kit the OV 3.2 QCe also qualifies as a producer of 8-lock structures, spacer fabrics and fine gauges. The machine is available in a choice of three frames: from open-width and industrial to giant frame. Stefan Bühler, regional sales manager for Turkey, has this to say: “Not for nothing has the OV 3. 2 QCe been one of our most popular machines for years. It is mainly used for sportswear and for leisure- and outerwear.” In Istanbul the OV 3.2 QCe on show will be a 30-inch, E40-gauge model.

D4-2.2 X for fine rib and interlock fabrics
The double-jersey D4-2.2 X is an obvious choice for knitting fine rib fabrics of up to E28 gauge. Spacer and interlock fabrics are also part of the machine’s established repertoire. And it can produce elastomeric plating in both cylinder and dial cam. No matter which of these tasks is assigned to the D4-2.2 X, it performs it with impressive productivity.

MV 4 3.2 II for flexibility in the single jersey sector
In the single jersey sector, the long-established German firm delivers a literally fine solution. The MV 4 3.2 II on show at the ITM knits to an E38 gauge. The machine can also be supplied for gauges from E14 to E60. It is, in addition, highly flexible, with a repertoire that ranges from piqué and double piqué to one-thread fleece and smooth single jersey.

Source:

Mayer & Cie.

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

ROICA™ by Asahi Kasei held its first business summit at Triennale Milano (c) C.L.A.S.S.
14.04.2022

ROICA™ by Asahi Kasei held its first business summit at Triennale Milano

On the 25th of March ROICA™ by Asahi Kasei invited its strategic European partners to the Triennale Design Museum for the first ROICA™ Summit, with the aim of sharing its global strategy and to consolidate relationships that are key to the Asahi Kasei global vision of its fiber and business.

Among the speakers Senior Executive Manager Mr. Shinichiro Haga and its successor Mr. Takehiro Kamiyama, who will take on the new role after more than thirty years in the Asahi Kasei Corporation and more than three years at ROICA™. Together they opened the floor by explaining the ROICA™ business strategy, which is based on three main steps:

On the 25th of March ROICA™ by Asahi Kasei invited its strategic European partners to the Triennale Design Museum for the first ROICA™ Summit, with the aim of sharing its global strategy and to consolidate relationships that are key to the Asahi Kasei global vision of its fiber and business.

Among the speakers Senior Executive Manager Mr. Shinichiro Haga and its successor Mr. Takehiro Kamiyama, who will take on the new role after more than thirty years in the Asahi Kasei Corporation and more than three years at ROICA™. Together they opened the floor by explaining the ROICA™ business strategy, which is based on three main steps:

  1. Continue to speed up ROICA™ responsible innovation  
  2. Continue to speed up ROICA™ international partnerships with a strong focus on responsible innovation
  3. Continue to push a new generation of communication where its story making will align with an authentic and consumer driven storytelling based on values.

Then, Mr. Shinohe Hiroaki Chief Marketing Officer Europe, introduced the new production strategy at global level  together with  its program of partnerships, plus the marketing and communication programs for the next year and beyond in synergy with Giusy Bettoni at C.L.A.S.S.

“We are extremely pleased to be here with our European partners, thanking them for the continuous valuable cooperations that made ROICA™ so special, and sharing with them which will be our next steps in order to be leading responsible innovation. This is a very precious moment, during which we are able to talk face to face and install long-lasting relationships, with the aim of supporting the apparel industry by making premium stretch becoming a key player for wellbeing values, which are extremely precious for the contemporary consumer. And this will be part of sport, lingerie, hosiery , fashion and swimwear wardrobes thanks to the ROICA™ special new generation of premium stretch innovations” affirms Shinohe Hiroaki.

More information:
Asahi Kasei ROICA™ C.L.A.S.S.
Source:

C.L.A.S.S.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.04.2022

Montex stenter at ITM

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability © ROICA™
Sportswear top by Cifra containing ROICA™
06.04.2022

ROICA™ : new generation of sportswear

  • Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability
  • Performance Days, Hall C1 – stand N08

Cifra, a leading Italian company in Warp Knit Seamless, has chosen ROICA™ by Asahi Kasei, an international reference for premium and smart stretch, for a new generation of clothing dedicated to wellbeing, travelwear and athleisure, made with Cifra exclusive and patented technology in the name of uniqueness and sustainability.

Innovative garments for men and women that combine fashion and function, guaranteeing optimal comfort at any time of the day. Base layers, tops, leggings, jumpsuits made with natural yarns, or recycled pre and post-consumer yarns in combination with ROICA™ EF, the first recycled stretch yarn certified Global Recycled Standard (GRS) able to complete proposals that offer design, performance and responsibility.

  • Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability
  • Performance Days, Hall C1 – stand N08

Cifra, a leading Italian company in Warp Knit Seamless, has chosen ROICA™ by Asahi Kasei, an international reference for premium and smart stretch, for a new generation of clothing dedicated to wellbeing, travelwear and athleisure, made with Cifra exclusive and patented technology in the name of uniqueness and sustainability.

Innovative garments for men and women that combine fashion and function, guaranteeing optimal comfort at any time of the day. Base layers, tops, leggings, jumpsuits made with natural yarns, or recycled pre and post-consumer yarns in combination with ROICA™ EF, the first recycled stretch yarn certified Global Recycled Standard (GRS) able to complete proposals that offer design, performance and responsibility.

The design of the garments, created in Cifra's design office, combines a perfect shape with body mapping technology that creates dedicated ventilation zones for a feeling of comfort and freshness as well as an innovative aesthetic impact.

And when it comes to comfort, ROICA™ activates a new generation conversation linked to the demands of the contemporary consumer looking for well-being in line with the concepts of safety and healthiness emerging in all aspects of daily life. In fact, ROICA™ by Asahi Kasei is the secret stretch ingredient of the modern wardrobe, able to "activate" garments by giving comfort, beauty, quality together with responsible and certified values.

All of this translates into the synergy of development with Cifra. The products, the materials that compose them, along with the way of production and who produces them, transparency and traceability are all aspects that become an integral part of the common proposal that Cifra and ROICA™ are able to offer by joining forces.

"We firmly believe in the new generation of companies oriented towards the creation and supply of valuable products, fully respecting people and the environment, while meeting the performance required by contemporary lifestyles," says Shinichiro Haga, Senior Executive Manager of the ROICA™ Division.

Intertextile and Yarn Expo spring show dates to be adjusted
Intertextile and Yarn Expo spring show dates to be adjusted
23.03.2022

Intertextile and Yarn Expo spring show dates to be adjusted

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 
Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained the decision: “In view of recent outbreaks in multiple provinces and cities in China, and to support the government’s pandemic control measures, the organisers of the fairs have decided to adjust the three spring shows by combining the Spring and Autumn Editions of Intertextile Apparel and Yarn Expo, and holding these concurrently with the Spring Edition of Intertextile Home. The decision is necessary to reduce the risk of transmission and to ensure the welfare of all our participants. We will keep in close communication with all parties involved and we look forward to providing an effective sourcing platform for the textile industry when it is safe to do so. As we continue to adapt during these challenging times, we’d like to express our thanks to all participants for their unwavering understanding and support.”
 
Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). 

Source:

Messe Frankfurt (HK) Ltd

PHD Marketing Ltd.
North Carolina neighbors Avgol America Inc. and YanJan LLC will be working together on the new project
17.03.2022

Avgol® and YanJan: commercial partnership for North American apertured spunbond project

Avgol® America Inc., a North American leader in the manufacture of high-performance nonwoven fabric solutions, and YanJan USA LLC, the professional material supplier for disposable hygiene products, have announced a new partnership to deliver exclusive product offerings to the North American market.

Under the terms of the new partnership, Avgol will be offering apertured spunbond products made exclusively by YanJan USA using its specific know-how and capabilities. YanJan USA will obtain the base spunbond materials exclusively from Avgol, with the partners developing and manufacturing products tailored to each company’s skill set and to meet customer needs.

“This partnership enables both YanJan and Avgol to diversify our overall product ranges and to push effectively into new market opportunities,” said Jian Weng, President and General Manager of YanJan USA LLC.

Avgol® America Inc., a North American leader in the manufacture of high-performance nonwoven fabric solutions, and YanJan USA LLC, the professional material supplier for disposable hygiene products, have announced a new partnership to deliver exclusive product offerings to the North American market.

Under the terms of the new partnership, Avgol will be offering apertured spunbond products made exclusively by YanJan USA using its specific know-how and capabilities. YanJan USA will obtain the base spunbond materials exclusively from Avgol, with the partners developing and manufacturing products tailored to each company’s skill set and to meet customer needs.

“This partnership enables both YanJan and Avgol to diversify our overall product ranges and to push effectively into new market opportunities,” said Jian Weng, President and General Manager of YanJan USA LLC.

“This is in an exciting partnership for our companies,” said Ronnie Batchler, VP Americas Region at Avgol. “The spunbond ‘precursor’ material will be specifically designed to meet customer specifications and deliver optimum perfomance. Aperturing of the spunbond will then give the nonwoven material additional unique attributes, such as improved physical performance and aesthetic appeal.

More information:
nonwovens Avgol YanJan
Source:

PHD Marketing Ltd.

INDA Announces Six New Board Members and Officers (c) INDA
INDA New BOD Members 2022
08.03.2022

INDA Announces Six New Board Members and Officers

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

  • Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

  • Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

  • Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

  • Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

  • Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

  • Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

Source:

INDA, Association of the Nonwoven Fabrics Industry

Oliver Jentschke Foto: Baldwin Technology Company Inc.
03.03.2022

Baldwin: Oliver Jentschke joins to lead European sales team

Baldwin Technology Company Inc. announced that Oliver Jentschke, an industrial engineer with a long track record as a customer-focused sales leader, has joined the organization as Vice President of Sales for Europe. His experience leading and developing commercial teams, along with his results-driven approach and passion for enhancing the customer experience, will be instrumental as he builds and delivers Baldwin’s print sales strategy across Europe.
 
Jentschke is a highly skilled commercial leader, most recently working for ratioparts GmbH (part of Arrowhead Engineered Products), where he was the Sales Director for Europe. Prior to that, Jentschke was the Sales Director for Oerlikon and ROFIN-LASAG AG. He also spent time as the Business Development Manager for Rotoflex/Mark Andy Inc., where he and his sales team drove revenue growth and market expansion throughout Europe. Jentschke received an industrial engineering degree from the University of Cologne in Germany.

Baldwin Technology Company Inc. announced that Oliver Jentschke, an industrial engineer with a long track record as a customer-focused sales leader, has joined the organization as Vice President of Sales for Europe. His experience leading and developing commercial teams, along with his results-driven approach and passion for enhancing the customer experience, will be instrumental as he builds and delivers Baldwin’s print sales strategy across Europe.
 
Jentschke is a highly skilled commercial leader, most recently working for ratioparts GmbH (part of Arrowhead Engineered Products), where he was the Sales Director for Europe. Prior to that, Jentschke was the Sales Director for Oerlikon and ROFIN-LASAG AG. He also spent time as the Business Development Manager for Rotoflex/Mark Andy Inc., where he and his sales team drove revenue growth and market expansion throughout Europe. Jentschke received an industrial engineering degree from the University of Cologne in Germany.

Source:

Baldwin Technology Company Inc.

International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line. © ANDRITZ
ANDRITZ crosslapper PRO 25-90
02.03.2022

ANDRITZ- a new batt forming line for Romatex

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

This will be the third line supplied by ANDRITZ to Romatex in four years. Helmut Höck, General Manager Operations at Romatex, says: “We bought our first line from ANDRITZ in 2017, then another one in 2019. We have been very satisfied with the close collaboration between our companies, the flexibility and reliability of the machines, as well as the excellent service from ANDRITZ over all these years. The experience has been uncomplicated. This has given us the confidence to consider ANDRITZ for a further investment.”

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, including batt forming equipment for the stitchbonding processes used to make Maliwatt, Malivlies and Multiknit. This segment addresses a variety of applications, including automotive, household, bedding, footwear, wipes, and many others.

Romatex is the leader in Maliwatt stitchbonding in Africa. Its facility is located in Cape Town. One of the company’s key strengths is its product diversification. Today, the company offers a complete range of bed linen, duvets, pillows, and stitchbonded products.

More information:
Andritz nonwovens
Source:

ANDRITZ-GRUPPE

24.02.2022

VDMA textile machinery webinar on sustainable dyeing involved Monforts, DyStar® and Goller

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

Source:

Monforts  / DyStar Singapore Pte Ltd

21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group

17.02.2022

Baldwin appoint Scott Burnett and Thomas Kobrak as new sales professionals

Baldwin Technology Company Inc. is pleased to announce that sales professionals Scott Burnett and Thomas Kobrak have joined the organization. Baldwin recently realigned its sales teams to provide a single regional point of contact for printing and packaging industry customers, optimizing service and simplifying access to the company’s process-improvement and consumables technologies, as well as access to technical experts.

Burnett is now serving as Baldwin’s Regional Sales Manager for the west-central region. He is responsible for driving sales growth with print and packaging customers in Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota and Wyoming. His experience within the industry and the knowledge he gained from previously being a Baldwin customer at Cedar Graphics in Iowa uniquely position him to understand customers’ needs and share the value of Baldwin’s products.

Baldwin Technology Company Inc. is pleased to announce that sales professionals Scott Burnett and Thomas Kobrak have joined the organization. Baldwin recently realigned its sales teams to provide a single regional point of contact for printing and packaging industry customers, optimizing service and simplifying access to the company’s process-improvement and consumables technologies, as well as access to technical experts.

Burnett is now serving as Baldwin’s Regional Sales Manager for the west-central region. He is responsible for driving sales growth with print and packaging customers in Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota and Wyoming. His experience within the industry and the knowledge he gained from previously being a Baldwin customer at Cedar Graphics in Iowa uniquely position him to understand customers’ needs and share the value of Baldwin’s products.

In addition, Kobrak is now serving as Baldwin’s Regional Sales Manager for the West Coast region. He is responsible for driving sales growth with print and packaging customers in Alaska, Arizona, California, Idaho, Nevada, Oregon, Utah, Washington and western Canada. Most recently, he was a sales representative for global film manufacturer Multi-Plastics.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

(c) Sappi Europe
Marianna Evenstein (Moderation), Gustavo Duarte (sappi), Kerstin Dietze (sappi) and Julian Thielen (Interseroh Plus)
08.02.2022

Sappi's Blue Couch Series: Switching to sustainable packaging material

The demand for environmentally friendly packaging continues to grow. This development is posing real challenges for brand owners. How do they make the switch to flexible packaging that is recyclable? What needs to be considered? How can the issue of recycling be advanced? And why does Europe still need to catch up on topics such as “defining recyclability” and “test methods”? Insight into these questions and more is featured in a new episode of Sappi's Blue Couch Series.

  • “Functional paper packaging – the path towards greater recyclability”
  • Julian Thielen, Head of the “Made for Recycling” service at Interseroh Plus, Kerstin Dietze, Key Account Manager for Paper and Packaging Solutions at Sappi, and Gustavo Duarte, Manager Competence Center Packaging Solutions at Sappi

The “Functional Paper Packaging – the path towards greater recyclability” episode will begin airing on 22 February, here.

The demand for environmentally friendly packaging continues to grow. This development is posing real challenges for brand owners. How do they make the switch to flexible packaging that is recyclable? What needs to be considered? How can the issue of recycling be advanced? And why does Europe still need to catch up on topics such as “defining recyclability” and “test methods”? Insight into these questions and more is featured in a new episode of Sappi's Blue Couch Series.

  • “Functional paper packaging – the path towards greater recyclability”
  • Julian Thielen, Head of the “Made for Recycling” service at Interseroh Plus, Kerstin Dietze, Key Account Manager for Paper and Packaging Solutions at Sappi, and Gustavo Duarte, Manager Competence Center Packaging Solutions at Sappi

The “Functional Paper Packaging – the path towards greater recyclability” episode will begin airing on 22 February, here.

Source:

Sappi Europe