From the Sector

SHIMA SEIKI announces a sales promotion package for the apparel industry together with KDDI, Linking 3D fashion design with cross-reality― realizing digital catalogs, VR showrooms and new customer experience allowing 360-degree viewing without actual samples

Leading fashion technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan together with telecommunications company KDDI Corporation of Tokyo, Japan launched "XR Mannequin for APEXFiz," a sales promotion package that links SHIMA SEIKI's APEXFiz design software for the apparel industry with KDDI's XR (cross-reality) technology.

XR Mannequin for APEXFiz will be offered to the apparel industry. Using an XR Mannequin that enables viewers to check product images from any angle in 360 degrees on various devices, XR Mannequin for APEXFiz enables digital catalogues with 3D virtual sample image data of garments designed on APEXFiz design software, 360-degree VR showrooms, as well as digitally extended stores. It also realizes virtual proposals at exhibitions, showroom-style stores with no inventory, and user-friendly purchase experience on e-commerce sites, and more. It also allows users to reduce excess stock at stores and create new sales opportunities.

Eventually, by adding movement to models wearing Virtual Samples and rendering them on a cloud server, customers will be able to view high-resolution virtual fashion shows on their smartphones and other devices.

 Until now, the apparel industry has been making actual product samples in each of the planning and design stages of production. This process not only takes an enormous amount of time and cost, but generates waste of raw materials including fabric that require disposal. At the retail stage, stores also needed to have various sizes and colors in stock to address a wide range of customer preferences, resulting in excess inventory.

With SHIMA SEIKI's APEXFiz, designs can be evaluated without making actual samples, minimizing resources spent on sample production as well as lead time, enabling environmentally-friendly manufacturing.

In May 2022, KDDI developed a high-resolution XR mannequin for apparel sales, with support from Google Cloud. It enables various devices such as store signages and smartphones to check products from any angle in 360 degrees, enabling stores to sell products without maintaining inventory.

SHIMA SEIKI and KDDI combines APEXFiz and XR Mannequin to start providing XR Mannequin for APEXFiz. This brings DX solutions to all stages in the supply chain for the apparel industry, from planning and design to sample making, production, distribution, and retail sales. SHIMA SEIKI and KDDI will continue to create services together that link each other's products, to bring about a sustainable society by reducing excess stock, and providing a customer experience that gives peace of mind when purchasing products.

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

The sofa collection was produced using Kornit’s Presto direct-to-fabric digital production system. With the on-demand technology, designers can easily and rapidly embrace new possibilities to transform mere concepts into custom fabrics. Digital production removes typical limitations of one fabric, one design at a time – whether it’s a single sofa or many sofas – and at the same cost. For industries ranging from fashion and home décor to other advanced textile applications, the Kornit solution consistently unlocks unlimited creativity – producing garments and fabrics with a high quality and a soft feel.

Rieter is moving its Kahramanmaraş service station to a larger location covering 2 000 m² in a bid to broaden its offering and strengthen its market position in Turkey. The station will house one of the region’s largest test-spinning facilities and provide know-how in sustainable yarn manufacturing.

The comprehensive portfolio covers both mechanical and electronic services, including the revision of gear units, servomotor adjustments, and suction drums. The station will also offer preventive maintenance and mill optimization. The service offering spans the entire Rieter product portfolio.

Highlights of the Kahramanmaraş Service Station include the setup of a fully automatic rotor spinning machine R 70 and the winding machine Autoconer X6. Three-quarters of the 2 000 m² service space is reserved for functional activities, which will feature one of the region’s largest test-spinning facilities. Customers can run yarn comparison tests and analyze the impact of different technology parts so they can optimize machine setups. In-depth yarn trials and access to Rieter textile technology expertise will allow customers to cater more effectively to the dynamic demands of textile brands regarding performance, quality and sustainability, such as recycling applications.

The Kahramanmaraş service station is strategically located at the heart of the region’s textile industry, with a large proportion of Rieter’s installed base located within a radius of around 200 kilometers. Turkey is a textile powerhouse, currently ranking fifth in global exports and poised for additional growth. The country’s industry is also implementing a green action plan to help it meet the growing demand for sustainable textiles, especially from Europe.

The new service station starts operations in September 2022 and will accelerate the growth of the company’s three stations in Turkey. Rieter has been operating service stations in Turkey since 2005 with a presence in the country dating back to the 1990s.

• First product development centre in Germany

ISKO has opened its second product development centre, based in Stade, Lower Saxony, following the success of the Creative Room London in the UK which had its opening earlier this year.

Creative Room Germany is a innovative space and the first of its kind in Germany. It is the latest initiative of Creative Room Services (CRS), a division of ISKO devoted to offering streamlined and simplified solutions for all denim requirements – from fabric to finished garment.

With a focus on sustainable washing and finishing techniques, customers of Creative Room Germany will be able to work in parallel with ISKO’s experts to achieve their desired denim looks. Together with machine technology partner Jeanologia, they have been able to develop innovative washing and finishing techniques that meet the highest quality and sustainability standards with a significantly lower environmental impact. Creative Room Germany will also be the central point for its customers full product development, ensuring the whole process is agile and more efficient.

By utilising ISKO’s patented recycling technology, they are now able to develop brand new garments by using fibres from post-consumer denim, finally closing the loop and giving a new and cutting-edge circular supply solution for their customers. As well as a hub for its customers, Creative Room Germany will also act as a platform for the wider denim community to share knowledge, create new and innovative ideas and to bring them to life.

“Building on from the success of our London facility, our goal will be to offer tailor made garment supply solutions for customers in the DACH, Benelux and Nordic markets and this facility will be the focal point of that offering. With a collaborative approach, we will fulfil our vision of bringing a new circular supply solution to the market.”
Pau Bruguera, Executive Director @ ISKO

Sustainable fashion brands YesAnd & Kornit Digital are teaming up with the global platform fostering innovation in the fashion industry, Fashinnovation. This month, the three like-minded companies will be unveiling a direct-to-garment printing collaboration.
 
YesAnd & Kornit Digital are (e)co-creating digital, on-demand printed certified organic blank merchandise, with graphic designs by artists, celebrities, influencers, musicians, fashion VIPs, NGO’s and more. Sharing core values of fashion & innovation & non-toxic, zero-waste production, and the fusion of technology to accelerate impact, this launch represents a cutting-edge and sustainable solution that’s accessible, traceable, customizable, and scalable. By joining forces, this collaboration will educate, engage, and activate both consumers and industry alike.
 
"We at Fashinnovation have a strong belief that the fashion industry must walk side-by-side with innovation, in order to ensure a sustainable future. We are thrilled for this collaboration with YesAnd and Kornit, as we hope to set an example when it comes to the power of unity. In our minds, it's not about a person's wins, but rather it's about our collective progress," said Jordana & Marcelo Guimaraes, Founders of Fashinnovation.
 
Debuting the first of their brand collaborations with farm-to-print organic merchandise, this collaboration will together minimize waste, water, chemical use, and energy, while celebrating climate action, manufacturing efficiencies, and sustainable innovation—representing a true and timely fashion statement. The brands will be debuting their select blank styles of digitally-printed designs from the initial capsule collection—including the YesAnd Frida Hoodie, Gloria Hoodie Tee, Dominique Tee, and the Samata Dress, with a graphic option aligning the missions of YesAnd, Fashinnovation and Kornit Digital, “Don’t Wear Clothes, Wear Change.”

• Monomaterial solution contains renewably-sourced polypropylene from the Bornewables™ portfolio of circular polyolefins
• Trexel employs its proprietary MuCell® technology to deliver a range of lightweighting benefits
• EverMinds™ in action: reuse and design for recycling are focus of value chain collaboration

Borealis and Trexel, an expert in foaming injection and blow moulded parts, announce that they have co-developed a new plastic bottle based on a grade from the Bornewables™ portfolio of polyolefins made using renewable feedstocks derived 100% from waste and residue streams. The lightweight bottle – which will be showcased at the Borealis stand at the K 2022 (from 19 to 26 October 2022 in Düsseldorf) – is reusable and fully recyclable. It boasts a significantly lower overall CO₂ footprint because it is composed of renewably-sourced feedstock and produced in the foaming process.

The Bornewables™ portfolio of circular polyolefins helps reduce the carbon footprint while offering material performance equal to virgin polymers. Using Bornewables grades allows for design freedom and colour flexibility, and helps retain a premium look and feel. The grades – which are commercially available in Europe – help conserve natural resources because they are derived solely from waste and residue streams, for example from used cooking oil. Reusing waste already in circulation instead of fossil fuel-based feedstocks enhances the sustainability of applications made using the Bornewables grades.

The reusable new bottle developed by Borealis and Trexel retains its value over many life cycles thanks to the use of Trexel’s proprietary technology in tandem with Bornewables grades; as a material solution, the new bottle minimises the use of valuable raw materials. Moreover, converters consume less energy in the production process when using the MuCell® technology. The bottle thus helps close the loop on plastics circularity by way of design for recycling, the use of renewable feedstocks, and excellent material performance across multiple life cycles.

Due to the continued good business development, especially in the Carbon Fibers Business Unit, SGL Carbon SE is increasing its Group sales and earnings guidance for the current fiscal year and now expects Group sales of approximately €1.2 billion (previously: approximately €1.1 billion). The company expects to achieve adjusted EBITDA (EBITDA pre = earnings before interest, taxes, depreciation and amortization before one-off effects and non-recurring items) of €170 - €190 million (previously: €130 - €150 million) in 2022.

Based on lower prices for acrylonitrile as main raw material of the Business Unit Carbon Fibers as well as higher than expected customer demand for acrylic and carbon fibers combined with consistently good production capacity utilization and capability, the management of SGL Carbon SE assumes an improved earnings development of this Business Unit.

SGL Carbon assumes that the factors mentioned will continue at least until the end of the year and that the earnings situation of the Business Unit Carbon Fibers will exceed previous expectations. Combined with the continued good business development of the other three Business Units (Graphite Solutions, Process Technology and Composite Solutions), an improvement in the sales and earnings situation at Group level is expected.

In line with the forecast increase for adjusted EBITDA (EBITDA pre) to between €170 and €190 million (previously: €130 - €150 million), the company is forecasting adjusted EBIT (earnings before interest and taxes and before one-off effects and non-recurring items) of between €110 and €130 million (previously: €70 - €90 million). The forecast for return on capital employed (ROCE) of originally 7% - 9% has been raised to 10% to 12% corresponding to the development of earnings. The expectations for free cash flow (significantly below previous year's level of €111.5 million) remain unaffected by the expected improvement in sales and earnings.

The updated forecast for fiscal 2022 has been prepared on the basis of the currently prevailing market environment and assumes no deterioration in the general conditions, in particular due to the war in Ukraine and its consequences for the global economy.
 
The definition of key figures used in this release is aligned to the Annual Report 2021. There were no changes in the scope of consolidation or accounting methods compared with the previous guidance.

The future of e-mobility will be determined in particular by safe battery enclosures. As batteries for electric vehicles become more performant, higher volumetric energy density plays a crucial role. If more energy is to be stored in less installation space, new material and design solutions are required. The development of suitable enclosures made of safe and highly robust lightweight materials is also required. This is a case for the Aachen Centre for Integrative Lightweight Production (AZL). A project on cell-to-pack battery enclosures for battery-electric vehicles, which has been eagerly awaited in the industry, will start in October this year there.

The design of battery housings is crucial for safety, capacity, performance, and economics. The Cell-to-Pack project, which is starting now, will focus on developing concepts for structural components and for producing them based on a variety of materials and design approaches. The concepts will be compared in terms of performance, weight and production costs, creating new know-how for OEMs, producers and their suppliers throughout the battery vehicle value chain. Companies are now invited to participate in this new cross-industry project to develop battery enclosure concepts for the promising and trend-setting cell-to-pack technology.

The basis for the project is the lightweight engineering expertise of the AZL experts, which they have already demonstrated in previous projects for multi-material solutions for module-based battery housings. Together with 46 industry partners, including Audi, Asahi Kasei, Covestro, DSM, EconCore, Faurecia, Hutchinson, Johns Manville, Magna, Marelli and Teijin, 20 different multi-material concepts were optimized in terms of weight and cost and compared with a reference component made from aluminum. All production steps were modelled in detail to obtain reliable cost estimates for each variant. Result: depending on the concept, 20% weight or 36% cost savings potential could be identified by using multi-material composites compared to the established aluminum reference.

It is expected that the design concept of battery enclosures will develop in the direction of a more efficient layout. In this case, the cells are no longer combined in modules in additional production steps, but are integrated directly into the battery housing. The elimination of battery modules and the improved, weight-saving use of space will allow for higher packing density, reduced overall height and cost saving. In addition, various levels of structural integration of the battery housing into the body structure are expected. These new designs bring specific challenges, including ensuring protection of the battery cells from external damage and fire protection. In addition, different recyclability and repair requirements may significantly impact future designs. How the different material and structural options for future generations of battery enclosures for the cell-to-pack technology might look like and how they compare in terms of cost and environmental impact will be investigated in the new AZL project. In addition to the material and production concepts from the concept study for module-based battery enclosures, results from a currently ongoing benchmarking of different materials for the impact protection plate and a new method for determining mechanical properties during a fire test will also be incorporated.

The project will start on October 27, 2022 with a kick-off meeting of the consortium, interested companies can still apply for participation until then.

• Innovations in Recycling and Sustainability: Sustainable Diaper Components, Natural Fibers, and Kitty Litter from Recycled Nappies

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists that will present their innovative material science solutions as they compete for the prestigious RISE® Innovation Award during the 12th edition of the Research, Innovation & Science for Engineered Fabrics Conference (RISE®) to be held in person September 27-28, 2022 at North Carolina State University.  The award recognizes novel innovations within and on the periphery of the nonwovens industry that creatively use next-level science and engineering principles to solve material challenges and expand the usage of nonwovens and engineered fabrics.

Finalists for the 2022 RISE® Innovation Award:
Cat Litter Made from Recycled Nappies – DiaperRecycle
DiaperRecycle has developed technology to recycle used diapers into cat litter. The aim of the company is to make an environmental impact and decrease the climate changing emissions of diaper waste. They’re diverting used diapers (used in households and businesses such as elder care) from landfill, separating the plastic and fiber and making cat litter. The plastic is prepared for recycling by plastics recyclers. The cat litter product is made by DiaperRecycle from the super absorbent fiber of diapers; it’s highly absorbent and flushable.

Biodegradable Diaper Components – Gottlieb Binder GmbH & Co. KG
Together, Avgol and Binder take on the challenge of disposable absorbent articles for the good of future generations and came up with sustainable diaper components. The technologies used are based on biotransformation technology, which makes it possible to achieve more sustainable products by supporting recycling and providing an alternative route for non-recyclable/fugitive waste management.

sero® hemp fibers – Bast Fibre Technologies, Inc.
Bast Fibre Technologies’ sero® hemp fibers offer the nonwoven industry an all-natural substitute for plastic fibers. From dedicated European- and US-based production facilities, BFT transforms raw bast fibers into premium natural fibers for applications ranging from single-use and durable wipes to industrial applications. Suitable for minority or majority blends, sero® hemp combines easily with standard nonwoven fibers to produce fabrics that meet the industry requirements for strength, uniformity, and processing efficiency.

RISE® conference attendees, technology scouts and product developers in the nonwoven/engineered fabrics industry seeking new developments to advance their businesses, will electronically vote for the recipient of the 2022 RISE® Innovation Award. The winner will be announced Wed., Sept. 28^th.

Technical experts on INDA’s Technical Advisory Board selected three finalists from among 12 nominations.  The 22-member board of technical professionals is represented by companies such as Absorbent Hygiene Insights LLC, Attindas Hygiene Partners, Berry Global, Cotton Incorporated, Crown Abbey, LLC, The DAK Group, Fi-Tech, Inc. Freudenberg Performance Materials, Glatfelter Sontara Old Hickory, Inc., Lenzing Fibers, Inc., Natureworks LLC, Nice-Pak Products, Inc./PDI, Nonwovens by Design, Norafin (Americas) Inc., The Nonwovens Institute at North Carolina State University, Poccia Consulting, LLC, The Procter & Gamble Company, RKW North America, Inc., Rockline Industries, Smith, Johnson & Associates, Suominen Corporation, and Texas Tech University.

“The RISE Conference recognizes and promotes innovation across the nonwoven and engineered material industry. Technology leaders will share invaluable information on innovative new approaches and concepts to resolve material science challenges. For any technical leader, technology scout or new product innovator, RISE is an event not to be missed,” said Tony Fragnito, INDA’s President.

The conference program will cover relevant and timely topics including: Creating a Circular Industry, Advancements in Sustainable Inputs in PLA, Developments in Natural Fibers I and II, Sustainable Inputs in Fibers and Biofibers, Sustainable Inputs from Waste Products, and Economic Insights and Market Intelligence.

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

FFI help to improve the reliability of connections and thus of the entire wind turbine. Furthermore, they eliminate slipping and prevent fretting of connections.

Other examples of applications for FFI are highly loaded flange connections between the rotor shaft and gearbox, connections between the main bearing and the machine carrier housing, the gearbox to generator, or at the pitch gear or ring gear. They increase the friction co-efficient between two components.