From the Sector

• Sustainability Report 2021 combines financial and non-financial performance indicators
• 2011-2021: 60% reduction in greenhouse gas emissions per metric ton produced. 51.7% renewable source energy achieved
• ESG criteria (environmental impact (E), social values (S), organizational governance (G)) determine sustainability strategy

The new RadiciGroup Sustainability Report has been published. With the goal of continuous improvement, the 2021 report has a broader reporting boundary compared to prior years and takes into consideration all the Group companies, including sales and service companies. Over 30 sites located across Asia, North America, South America and Europe have provided their 2021 data on economic, social and environmental performance.

Not only indicators of a financial nature but also measures of environmental impact (E), social values (S) and good organizational governance (G): the latter so-called ESG criteria have become a priority for RadiciGroup, which is preparing for the new European Union non-financial reporting directive in order to contribute to the transition towards a fully sustainable economic system and increase the value of its companies.

On the environmental front, the themes of climate change and decarbonization are RadiciGroup priorities and part of a policy aimed at the uncoupling of growth and resource usage. The Group undertakes to lower emissions from production and choose limited-impact energy sources. This commitment is confirmed by the numbers: in the 2011-2021 period, total emissions per metric ton produced were reduced by 60%, while renewable source energy used by the Group reached 51.7%. Specific investments to decrease environmental impact are ongoing: in 2021, EUR 3.1 million were allocated to introduce best available techniques and improve emissions abatement and energy efficiency.

RadiciGroup promotes professional growth by valuing competence and investment in training: Group training hours once again rose after the pandemic period from 36,000 hours in 2020 to 46,000 hours in 2021. The training method was often a hybrid, taking advantage of aspects experimented with during the pandemic, that is, less traveling and use of facilities in favour of higher groupwide attendance, without the need for participation limits. Fifty-five percent of total training hours was dedicated to health and safety, which has yielded positive results based on the related indicators.

Angelo Radici, president of RadiciGroup: “Today, the United Nations 2030 Agenda for Sustainable Development is our main guideline on sustainability issues. It shows us an ambitious scenario and urges us to confront a multitude of challenges that affect our enterprise from every point of view. We try to be quick to react and tenacious, staying faithful to our roots and our style, but expanding our perspective to become increasingly more competitive and proactive in the businesses we are engaged in. From the viewpoint of achieving less environmental impact in the future, we propose to be an enabler and facilitator for our stakeholders on themes such as the circular economy, where we see ourselves as protagonists in ecodesign and recycling, as well as innovation, which we put at the service of anyone who is processing and using our products, so as to offer real sustainability solutions together.”

David Herberg, Vice President Engi-neering EMEA at automotive supplier Adient, has been named Rising Star 2022 in the Engineering category by Automotive News Europe magazine.

Every year since 2010, Automotive News Europe has recognized talents in the European automotive industry for their outstanding careers and special achievements in the service of their company and the industry as a whole. To be eligible, candidates must have a minimum of ten years’ experience in the industry, speak at least two languages and be aged 45 years or younger at the time of the nomination.

"The 19 people we are honoring this year are special," said Luca Ciferri, Associate Publisher & Editor of Automotive News Europe. "They’ve made it to the top from a pool of more than 130 candidates, making this year's selection process the most competitive in the history of the award."

Herberg, graduate industrial engineer and aged 45, looks back at a career spanning more than ten years at Adient, a leading supplier of seating systems for the automotive industry. After several years at the management consultancy McKinsey and various management positions at Adient as well as its predecessor Johnson Controls, Herberg has been responsible for around 1,200 employees in the development of seat structures, trim and complete seating systems since May 2020.

Digitale Technologien können natürliche Ressourcen in der Produktentwicklung und -nutzung sparen. Die aktuelle Kurzanalyse „Digitale Technologien für die Entwicklung ressourceneffizienter Produkte und Services“ des VDI Zentrums Ressourceneffizienz (VDI ZRE) zeigt, wie die Möglichkeiten der Digitalisierung für eine ressourceneffiziente Entwicklung von Produkten und Services genutzt werden können.

Digitale Technologien machen die Entwicklung von Produkten in vieler Hinsicht effizienter. Grundlagen sind ein kontinuierliches Datenmanagement und die Kommunikation von Maschinen untereinander. Zum Beispiel begleiten digitale Zwillinge Produkte im Idealfall über den kompletten Lebensweg und erfassen dabei u.a. das Nutzungsverhalten. Bei der Neu- und Weiterentwicklung von Produkten können diese Daten dann genutzt werden, um Testschleifen digital zu simulieren. Dank weniger physischer Prototypen wird Zeit und Material bis zur Herstellung des gewünschten Produkts eingespart.
 
Basis für die Entwicklung neuer Produkte und Dienstleistungen mit Hilfe von digitalen Technologien sind Daten. Diese entstehen durch die Vernetzung von Objekten und Menschen im Umfeld der Industrie 4.0. Informationen, z.B. aus der Nutzungsphase oder der Produktion, ermöglichen Rückschlüsse, die u.a. auch für die Neu- oder Weiterentwicklung von Produkten und Dienstleistungen nützlich sind. Gleichzeitig gilt es aber, mit der großen Komplexität der Daten und Optimierungsmöglichkeiten umzugehen.
 
Bei der Implementierung digitaler Technologien in der Produkt- und Serviceentwicklung ist eine schrittweise Herangehensweise für Unternehmen empfehlenswert. Zunächst müssen sämtliche in der Wertschöpfung anfallenden Daten möglichst präzise gesammelt und verwaltet werden. Erst im Zusammenspiel zwischen einer zur Datenerfassung und Weiterverarbeitung notwendigen Infrastruktur und den dadurch zur Verfügung stehenden Informationen können digitale Technologien Entwicklerteams bei der ressourceneffizienten Entwicklung von Produkten und Dienstleistungen unterstützen.

Die Kurzanalyse „Digitale Technologien für die Entwicklung ressourceneffizienter Produkte und Services“ zeigt verschiedene zur Verfügung stehende digitale Technologien und damit verbundene Methoden in der Produktentwicklung auf und bewertet diese im Sinne der Ressourceneffizienz. Praktische Beispiele zeigen außerdem, wie Unternehmen bereits heute natürliche Ressourcen dank Innovationen in der Produktentwicklung einsparen können. Erstellt wurde die kostenlose Kurzanalyse im Auftrag des Bundesumweltministeriums. Sie steht zum Download zur Verfügung.

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces that it has been named one of the 11 French companies selected for the 2022 edition of Deloitte France’s Best Managed Companies program.
 
Established 30 years ago by Deloitte Canada and launched in France at the end of 2021, this program recognizes excellence in companies that stand out for the quality of their management and their performance, through a rigorous and independent selection process. Companies are assessed on their long-term strategy, talent management, innovation capacity and CSR policy, as well as their governance and financial management. On one hand, these criteria assess the company's distinguishing features and, on the other hand, its capacity to address current and future challenges.
 
Lectra is one of 11 French companies recognized as the Best Managed Companies for 2022. “For this first edition, I am delighted to announce that Lectra is one of the companies to have obtained our Best Managed Companies mark of excellence,” says Eric Forest, Deloitte Private Associate and Head of the Best Managed Companies program. “Throughout the selection process, Lectra shone through with its extensive strategic vision, solid financial and innovative culture, and its ability to decrypt trends in order to adapt its solutions to changes and the needs of its different markets. This enables Lectra to be a strategic partner to guide its customers in their digital transformation.” Thanks to its capacity to develop innovations, be that with equipment, software or services, and its mastery of technologies such as IoT, the cloud, artificial intelligence and big data, Lectra plays a key role in helping fashion, automotive and furniture industry players evolve towards Industry 4.0.
 
“Obtaining the Best Managed Companies mark of excellence is great recognition for all of our teams at Lectra. I would like to thank all Lectra employees for this collective achievement,” says Daniel Harari, Lectra’s Chairman and CEO. “The work we have carried out together has enabled Lectra to become a global technological leader. This recognition inspires us to continue with our commitment to the Industry 4.0 revolution and to the success of our customers.”

ROICA™ strengthens its presence in the apparel segment thanks to its established network of partners, who will present their latest innovations at the upcoming Première Vision.

ROICA™ partners are the “artists” and “heartists” of premium stretch in fabrics: because they have at heart all the values for which ROICA™ stands for. These partners presenting at Première Vision are:

• Iluna Group, whose journey into the new dimension of responsibility continues with developments in GRS (Global Recycled Standard) certified recycled yarns aimed at unprecedented effects in looks, performance and hands. Brand new for this edition of Première Vision is the inclusion of GOTS-certified organic cotton in GRS-certified galloons and allover lace containing ROICA™ EF, so as to meet market demands for natural comfort in the underwear sphere.
• Innova Fabrics, which recently enhanced its smart offering by launching the RF (Residual Free) line, with the goal of reducing the impact of microplastics derived from the fashion industry. This is made possible by mixing two responsible ingredients, SENSIL® BioCare by Nilit and ROICA™ V550 by Asahi Kasei, which give birth to both sporty and casual fabrics.
• Inplet, which enriched its production of smart elastic and rigid knitted fabrics with three new products: a powernet fabric in 77% polyamide RECO and 23% ROICA™ EF with good recovery; a net fabric in 55% polyamide RECO and 45% ROICA™ EF characterized by a soft hand and good elasticity; and a 79% polyamide and 21% ROICA™ V550 good power, good recovery and a soft touch.
• Penn Textile Solutions/Penn Italia, whose highlights of the new collection are on one side fabrics developed with the use of Neride eco yarns by Nurel with ROICA™ V550, characterized by restraining lace effect, soft touch and breathable, in combination with tulle as a sustainable basic, and on the other side charmeuses with soft hand, raw cut in combination with a band fabric from the dreamshape family with reinforced gripping edge, made again in Neride eco yarns by Nurel with ROICA™ V550
• Tessitura Colombo Antonio, which in its new A/W 23-24 collection expands its proposal of regenerated lace from the ECO-LACE line: new designs inspired by fashion trends using ROICA™ EF. Also, in its BIODEGRADABLE line it uses ROICA™ V550 for the realization of new designs. The new MICROMODAL line uses ROICA™ V550; the effect of this lace range is softness, elegance and relief effect.

Der Bundesverband Medizintechnologie (BVMed) hat die Arbeitsgemeinschaft Medizintechnik des VDMA (Verband Deutscher Maschinen- und Anlagenbau) als neues Mitglied aufgenommen.

Zur Bewältigung der Herausforderungen der MedTech-Zulieferer hat der BVMed einen neuen „Fachbereich Zulieferer (FBZ)“ gegründet, in dem neben den Zuliefer-Unternehmen des BVMed auch die VDMA AG Medizintechnik aktiv mitarbeiten wird. Gründungsmitglieder des BVMed-Fachbereichs sind neben der VDMA AG Medizintechnik die Unternehmen Ceramtec, Freudenberg und Raumedic. Der BVMed-Fachbereich steht weiteren Zulieferunternehmen offen, die aktiv an gemeinsamen Themen mitarbeiten wollen. Bei der MDR ist die Medizinprodukte-Zulieferindustrie beispielsweise von den Themen Dokumentationspflichten, Marktbeobachtung (Post Market Surveillance | PMS) und Auditierung durch Benannte Stellen betroffen. Weitere Themen sind die Herausforderungen beim Aufrechterhalten globaler Lieferketten und der Versorgungssicherheit in Krisenzeiten sowie der Themenkomplex Umwelt und Nachhaltigkeit, beispielsweise der Kunststoff-Kreislaufwirtschaft und dem Lieferkettensorgfaltspflichtengesetz. Gemeinsame Themen mit den Zulieferern ergeben sich auch im Bereich Forschung & Entwicklung, beispielsweise bei Materialrezepturen.

Die VDMA Arbeitsgemeinschaft Medizintechnik ist das Netzwerk für die Zuliefererindustrie der Medizintechnikbranche. Mit insgesamt über 320 Unternehmen, Forschungsinstituten und Startups bildet der Verband zuliefererseitig die komplette Prozesskette der Medizintechnik ab.

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

EREMA Group K 2022 preview
In Düsseldorf, the subsidiaries of the EREMA Group - which are EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC - will present their technological innovations, services and support together at a Group trade fair stand for the first time. Seven new recycling systems and components will be presented that enable large-scale plants with a production capacity of up to 6 t/h while setting a milestone in recyclate quality and process stability. This is made possible by technological innovations in the plasticizing unit that have been specially developed for high throughputs with low specific energy consumption, the new EREMA 406 laser filter with a 50 percent larger screening area, and new digital assistance systems that will be launched at K 2022 and made available on the BluPort® customer platform. These include, for example, the PredictOn app, which helps to anticipate and eliminate imminent malfunctions based on continuous measurement and evaluation of machine data.

New series of machines for new target groups
For customers looking for rapidly available recycling systems for simple applications, EREMA Group subsidiary UMAC has an innovation in store for K 2022. The company, which has so far specialised in refurbishing and trading in previously owned equipment, is expanding its business area and in Düsseldorf will launch READYMAC, a standardised, prefabricated recycling solution that can be produced from stock, based on proven EREMA TVE technology.

Finally, in the inhouse recycling segment, PURE LOOP and PLASMAC will round off the wide range of machines offered by the group of companies with their product portfolio.

Live recycling and lighthouse projects at the Circonomic Center
In the outdoor area of the K show, EREMA will bring plastics recycling to life with live demonstrations in conjunction with cooperation partners. Different waste streams are processed for this purpose. The wide variety of high-quality applications for recyclate will be showcased in the "products made of recyclate" exhibition, ranging from technical components to consumer goods and food packaging.

Borealis – accelerating the transition towards a more circular future
Borealis is committed to using their expertise and global reach to advance the circular economy of plastics. At the joint Pre-K 2022 kick-off on June 13, Borealis provided a preview of their integrated way of circular thinking and featured topics and activities at the K Fair 2022 in October. The preview covered new technologies and innovations including new packaging and infrastructure applications of the Bornewables™ portfolio of circular polyolefin products, manufactured with renewable feedstocks. New applications for Design for Recyclability, Re-Use, chemical recycling and advanced mechanical recycling were also on display.

Albstadt-based Mayer & Cie. has been named a Top 100 award-winner for the third time as one of Germany’s most innovative small and mid-range businesses. The jury made special mention of the circular knitting and braiding machine manufacturer’s innovative processes. At the centre of the family firm’s further digital development is on the aim to boost its customers’ productivity. Last Friday, 25 June, members of the Mayer & Cie. management received the award from the science journalist Ranga Yogeshwar at the SMB summit in Frankfurt am Main.

For some time now, the focus of development work at Mayer & Cie. has been on lean management in assembly processes, on optimisation of aftersales service, including setting up an online shop for spare parts, and on product lifecycle management, or PLM, which stands for a concept of seamless integration of all the information that arises during a product’s lifecycle. A clean data structure is the basis for these measures, it’s called the “digital backbone”. It means that all product data is processed in the same database and all information is available only once and can be downloaded immediately.

In all, 436 companies, including about ten per cent from machinery and plant engineering, competed for the Top 100 seal of innovation this year. Nearly 300 were successful and were congratulated in person by Ranga Yogeshwar at the SMB summit. He noted that the award winners set a role model example. “Innovators are thought leaders; they are always pioneers too,” said Yogeshwar, who mentors the competition. “They put their products to the test and ask themselves what an ecological society and a climate-oriented world will require of them. And they check the opportunities and challenges that increasing digitisation will bring for forms of cooperation, social relationships and, with them, for employee retention.”

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

The N.SIR123SP computerized knitting machine with intarsia capability features a special loop presser bed for producing hybrid inlay fabrics with both knit and weave characteristics. N.SIR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible.

APEXFiz™ is subscription-based design software that supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio. Staff at the SHIMA SEIKI booth will be donning knit uniforms produced as a collaborative effort between SHIMA SEIKI ITALIA, knitting companies and yarn companies.

• Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTI^TM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign^® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign^® APPROVED.

The sustainable chemistry index will be reserved for substances that offer transparency on a number of additional indicators including the chemical’s circularity viability, greenhouse gas emissions during production, and the source of the raw materials. The sustainable chemistry index will also require that the downstream use of the chemical is optimized, meaning, for example, that it promotes resource saving in textile finishing. Additionally, excellent corporate governance paired with well-defined environmental and social (ESG) goals will be a pre-condition.

SCTI^TM is an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

Bluesign will implement and manage the sustainable chemistry index as an independent authority with a holistic approach to helping companies throughout the textile supply chain improve their sustainability performance.