From the Sector

Because aircraft engine noise contributes to environmental noise around airports and populated cities, the aerospace industry has been working on new aircraft designs that will emit less noise so they can meet the ever-increasing requirements imposed on the industry to reduce noise pollution. Shielding and absorbing aircraft engine noise at the source represents one of the most effective ways to address this issue.

Hexcel, a global leader in advanced composite technology, has been at the forefront of acoustic technology development with its Acousti-Cap® broadband sound-reducing honeycomb, which enables engine designers to reduce the noise from takeoffs and landings yet without adding significant weight to the aircraft.
 
“Hexcel has continued investing in the evolution of Acousti-Cap® product technology to improve performance and reduce cost,” said Imad Atallah, Group Product Manager for Honeycomb at Hexcel. “Collaboration with industry leaders, including NASA and Boeing, has been key to that development,” he added.
 
The 2DOF (Two Degrees of Freedom) honeycomb core acoustic liner was introduced in 2008 and was subsequently adopted and installed on the Boeing 787 Dreamliner inlet, the Boeing 747-8 inlet and transcowl, and more recently on the Boeing 737 MAX inlet. This success enabled continued technology development and evolution in MDOF (Multi-Degrees of Freedom) where the acoustic septum is inserted in the honeycomb cell at different heights, as well as having two septums in honeycomb chambers. This type of technology allows for improved acoustic attenuation at a broader frequency range, as well as increased absorption.
 
“Hexcel’s Acousti-Cap® technology has shown great performance benefits over competing technologies from the beginning” said Clark Smith, Director of Technology -- Core Products at Hexcel. “We have continued to improve the technology through taking advantage of the single cell treatment concept, by adding capability that the industry was looking for,” he added.   
 
Hexcel’s latest Acousti-Cap® technology was recently tested in a joint NASA-Boeing flight test on a B737 MAX test platform, and the results beat expectations as reported by Aviation Week. Collaboration between Hexcel and NASA over several years on the development of MDOF technology led to the successful test results on this latest flight test.
 
The ability to attenuate a broader noise frequency range and increase acoustic absorption with the Hexcel liner has allowed an optimized design of the overall inlet that reduces drag and improves noise attenuation. Hexcel continues to invest in acoustic liner technology and is proud of the positive results of this NASA-Boeing flight test.

The Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen University is installing a new ENGEL injection molding system in its technical center. Engel Deutschland GmbH – in cooperation with the ENGEL Centre for Lightweight Composite Technologies in Austria – will install the 2-component injection molding system with turning plate and 17,000 kN clamping force in 2019. This machine setup is the basis for further developments of efficient inline-combination technologies using different kinds of polymer performance materials.

The ENGEL injection molding system will enable innovative combinations of already established fiber-reinforced plastics (FRP) processes and the development of new individual processes. The focus is on increasing resource efficiency in lightweight production. With the new equipment, new research and development initiatives can explore the more efficient use of materials, which are eventually the key to the mass production of lightweight components. The research will address multi-material systems, continuous processes, process chains as well as self-optimizing processes.

Dr.-Ing. Michael Emonts, Managing Director of the Aachen Center for Integrative Lightweight Production (AZL) is looking forward to realizing new innovative lightweight production process with the new injection molding system: “This new injection molding system offers us as specialists for lightweight production technology in cooperation with the injection molding experts of the Institute of Plastics Processing – the IKV – the opportunity to establish hybrid processes for industrial lightweight applications. The system will expand our existing machinery in the AZL Technical Center and will be available as an important platform for lightweight production research at RWTH Aachen University.”

Being a Partner of the AZL, ENGEL has already been working closely with the AZL for many years as a Partner Company of the AZL Partner Network. Dr. Stefan Engleder, CEO of the ENGEL Group, emphasizes the importance of close collaboration with technical universities and especially with the AZL: “The AZL provides great conditions for industry-related research activities in the field of lightweight composites as it is characterized by a strong interdisciplinary approach. It benefits from the great infrastructure and the collaboration with well-known institutes of the RTWH Aachen University. ENGEL is looking forward to working together with the AZL on developing efficient lightweight composite mass production processes.”

In addition to the numerous composite and lightweight equipment at the RWTH Aachen Campus, the AZL Technical Center comprises large-scale equipment for the development of processes for lightweight production, such as a composite press from Schuler Pressen GmbH with 18,000 kN clamping force.

With an investment in an Innovation Center with testing labs and additional production facilities, Carl Meiser GmbH&Co KG gives a clear statement to it’s location in Albstadt in Central Europe. As well this underlines the know-how and the motivation of the whole team. The constructions were already launched. The first buildings for production and a part if the Innovation Center will be ready end of this year. State of the art offices and social facilities will be ready to move in mid of 2019.

“After our suffered setback with the fire in our production facilities in November 2017, this investment will move us much more forward and will give us the motivation to offer our customers even better and more innovative service and products. In long-term view this will creates the base for further growth”, says Jens Meiser CEO of Carl Meiser GmbH&Co.KG. During the last months we already invested in production technology and machines. During the last weeks we changed the complete production organisation to reach a lean product flow.

As well Meiser expanded it’s apprenticeship programme during the last years. At the moment we apprentice new staff members in three different education programmes. It is planned to add a fourth in management in future.

The company Carl Meiser GmbH&Co.KG with it’s brand „MEISER – Know How in textiles“ delivers to the high end underwear and lingerie industry as specialised dyehouse for knitted fabrics. With the brand “NOPMA technical textiles” the company acts as a fast growing development and production partner for the aviation, automotive and furniture industry as well the protection fabric industry. For this industries coated fabrics are developed and delivered to the markets. “In this sector we grow continuous during the last years. We are convinced that our investment in the Innovation Center will support this growth next to our first presence as exhibitor on the fair Techtex in 2019”, says Jens Meiser.

In the approval phase the company was supported by the city of Albstadt in all necessary questions. Fast and possible solutions were found. This shows the Mittelstands-friendly climate in this region in south Germany. The invest is supported by the national programme “Spitze auf dem Land” by the country of Baden-Württemberg and the EU.

• Decline in revenue due to volatile standard viscose prices and currencies
• Prices for key raw materials still high
• New production line in Heiligenkreuz in start-up phase
• Backward integration into dissolving wood pulp to be strengthened via joint venture in Brazil

Lenzing – The Lenzing Group generated solid results in a challenging market environment in the first half of 2018. The decline in revenue and earnings compared with the first half of the previous year, which was the best half-year in the company’s history, was based on a mix of volatile prices for standard viscose and price increases for key raw materials, coupled with currency effects. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment and is increasingly bearing fruit. The corporate strategy sCore TEN is being implemented with great discipline in order to expand the company’s offering of specialty fibers and even more extensively support customers and business partners.

Revenue declined by 6.4 percent compared with the first half of the previous year to EUR 1,075.4 mn. This decrease is primarily attributable to less favorable currency exchange rates. EBITDA (earnings before interest, tax, depreciation and amortization) decreased by 28.1 percent to EUR 194.8 mn, especially due to price increases for key raw materials and higher energy prices. The EBITDA margin fell from 23.6 percent in the first half of 2017 to 18.1 percent in the first half of 2018. EBIT (earnings before interest and tax) declined by 37 percent to EUR 128.7 mn, leading to a lower EBIT margin of 12 percent (H1 2017: 17.8 percent). The net profit for the period dropped by 39.3 percent from EUR 150.3 mn in the previous year to EUR 91.3 mn. Earnings per share equaled EUR 3.44 (H1 2017: EUR 5.55).

“So far, the financial year 2018 proved to be as challenging as expected, and market headwinds were clearly noticeable. In this market environment, we are satisfied with the solid results we report. We are proud that with our corporate strategy sCore TEN and the focus on growth with specialty fibers we show big steps in the right direction. The recently announced joint venture with Duratex is another important step in executing this corporate strategy,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “We will continue to implement our strategy with great discipline and are convinced that this will steadily improve the long-term profitability of Lenzing,” Doboczky adds.

Largest dissolving wood pulp line worldwide

In June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest dissolving wood pulp plant (single line concept) in the state of Minas Gerais, (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers, defined in Lenzing’s sCore TEN strategy. The joint venture will investigate the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decision to build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Even stronger focus on sustainable products

As a pioneer in sustainable fiber solutions, the Lenzing Group is committed to higher standards in the textile and nonwoven sectors. More than EUR 100 mn will be invested in sustainable manufacturing technologies and production facilities by 2022 in order to realize this vision. In line with the Group’s specialty strategy, another two milestones were set in the first half of 2018: Lenzing announced an investment of up to EUR 30 mn in another pilot line for the production of TENCEL™ Luxe filaments at the Lenzing site. In addition, the company also introduced the environmentally friendly process for the production of LENZING™ ECOVERO™ branded viscose fibers at its Chinese site. Both decisions contribute to better meeting the strong demand for environmentally compatible products.

Expansion of capacities

CAPEX (investments in intangible assets and property, plant and equipment) rose by 60.8 percent year-on-year to EUR 117.2 mn in the first half of 2018. This is primarily attributable to the capacity expansions in Heiligenkreuz (Austria) and Mobile, Alabama (USA) and the expansion of the existing dissolving wood pulp plant in Lenzing. The company is pressing ahead with these projects as well as with planning work on the construction of the next state-of-the-art lyocell production facility in Prachinburi (Thailand).

New brand identity

With the new positioning of its master brand and its product brands, the Lenzing Group started a new phase of branding and brand communication in the first half of 2018. Lenzing decided to carry out a new brand strategy in order to sharpen its company and product profile as a sustainable innovation leader for customers and partners along the value chain as well as for consumers. The most important pillar of this new brand strategy is a brand architecture with a focus on fewer brands and a strong message to consumers. With the TENCEL™ brand as an umbrella brand for all specialty products in the textile segment and the VEOCEL™ brand as the umbrella brand for all specialty fibers in the nonwoven segment as well as the new master brand, which was presented in March, Lenzing showcases its strengths in a targeted manner.

Outlook

The International Monetary Fund expects a further acceleration in global economic growth to 3.9 percent for 2018. However, growing protectionist tendencies in the political arena represent a source of uncertainty. Export-oriented companies in the Eurozone are faced with additional challenges from the currency environment.

Developments on the fiber markets should remain positive, but with continuing volatility. The rising demand for cotton should support prices despite the increase in production. Polyester fiber prices have stabilized after the increase in previous years.

The wood-based cellulosic fiber segment, which is relevant for Lenzing, should see further strong demand. After years of moderate capacity expansion in the viscose sector, significant additional volumes will enter the market in 2018 and 2019. As a result, standard viscose prices will remain under pressure. The Lenzing Group is very well positioned in this market environment with its corporate strategy sCore TEN and will continue its consistent focus on growth with specialty fibers.

The Lenzing Group still sees challenging market conditions for the second half of 2018. In addition to the price pressure on standard viscose, the prices of some key raw materials such as caustic soda are still at a very high level and exchange rates continue to be volatile. Our specialty fibers are expected to continue their very positive development. In this context, the Lenzing Group is satisfied with the earnings development to date, but underlines its estimate that the results for the year 2018 will be lower than the outstanding results in the last two years.

Built on an island right off the Finnish capital Helsinki, the Nolla cabin represents an ecological alternative to cabin life.

This summer, living with minimal emissions will be put to the test. Neste is building a prototype of a cabin that has a minimal environmental impact in terms of both carbon dioxide emissions and concrete impact on nature. The Nolla (= zero) cabin, designed by Finnish designer Robin Falck, is located just outside Helsinki city center, on the Vallisaari island. The cabin has been built from sustainable materials and is designed for a simple lifestyle with minimal to no emissions, taking into account the surrounding nature in every respect.

Located on the idyllic island of Vallisaari in the Helsinki archipelago, the Nolla cabin encourages people to consider how modern solutions and innovations could enable sustainable cabin living. Vallisaari has been in a natural state for decades and is thus the perfect location for an urban cabin experience, located at a 20-minute boat ride away from the Helsinki market square. The ecological and mobile Nolla cabin will be in Vallisaari until the end of September, demonstrating a lifestyle that generates minimal to no emissions.

Placing the compact and mobile cabin on its private lot does not require a construction permit
and it has been designed to use building materials as effectively as possible. The cabin is the size of a small bedroom and can be assembled and transported without heavy machinery, leaving its environment nearly untouched. The Nolla cabin has been designed by Finnish designer Robin Falck, whose earlier design, Nido cabin, has been globally acknowledged.

The Nolla cabin introduces solutions, which enable minimizing cabin life emissions remarkably. The energy supply of the cabin is entirely renewable; electricity is generated by solar panels, whilst the Wallas stove, reserved for cooking and heating, runs entirely on Neste MY Renewable Diesel, made 100% from waste and residue. The Aava Lines raft operating between Helsinki city centre and Vallisaari will also run on Neste MY Renewable diesel that can reduce greenhouse gas emissions by up to 90%.

“With the Nolla cabin, we want to offer visitors the possibility to experience modern cabin life in the realm of nature, with minimal emissions. An ecological lifestyle does not only require giving up unsustainable commodities, but also discovering modern, sustainable solutions that can be used instead. This has been an essential part of the design process”, says Falck.

“Finns are known for spending time at their beloved summer houses. We wanted to explore sustainable solutions that could enable cabin life with minimal emissions. Shared and circular economy, as well as new technologies and innovations have made it possible to enjoy our cabins without harming or burdening the environment. Some of the solutions that have been used at the Nolla cabin are perfectly adaptable at any cabin”, says Sirpa Tuomi, Marketing Director at Neste.

The Nolla cabin is executed in collaboration with Fortum, Wallas and Stockmann and is part of the Journey to Zero project by Neste, which explores new ideas and aims to steer the world towards a cleaner future with fewer emissions.

The Perlon Group is making great strides on its journey towards the future and is therefore vigorously implementing the measures required to achieve its aim. This aim (known internally as ‘strategy 2020’) provides for the next level of globalisation and the sustainable growth of the market leader in the production of synthetic filaments. Through the extensive relocation of existing; and the generation of additional production capacity, the requirements have been accomplished and will thus directly serve increasing demand in the main volume markets. Part of this strategy, is the integration of one of the four German sites into the remaining three, this will then strengthen those sites and support the expansion of the factories in the USA and China.

The key to this success is a highly qualified and motivated personnel, engaged and focussed project staff and lastly but by no means least, loyal customers all of whom welcome this future direction and support us, their longstanding business partner. Important milestones are being reached with minimum disruption to the daily business in spite of a continuingly healthy order book

Important Milestones have so far been

• Implementing the newly built finished goods warehouse and a production line for PMC-Monofil at Hahl Inc, the production site in Lexington, SC
• Completing the building of the production hall with integrated admin building and starting to fit out the interior of the new production site in Haining, China. This is on schedule for the fixed opening date of 29 November 2018.
• Implementing an additional production line for PMC-Monofil into the Munderkingen site in Germany. Furthermore the planning for the transfer of an additional production line has also been finalised.
• Completion of the plant layout in the Industrial park in Bobingen (Germany) to allow for the transfer of several production lines from their current homes in Dormagen and Recytec in Munderkingen (Perlon’s recycling business).

With the help of a tailwind from the targets achieved thus far, Florian Kisling (Perlon CEO) and his team are looking forward with optimism to the additional transformation and the finalisation of this mammoth ground breaking project. They are already thinking ahead to the subsequent project ‘2020+’.

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

“Eva is an excellent addition to the Bally team. The combination of a consolidated experience and understanding of luxury brands along with her background driving the strategic development of successful global projects make her the ideal leader to drive Bally's commitment to unified commerce on a global level".
Frédéric De Narp, Bally Group CEO

Bally has moved to a three-pronged regional strategy and as such is also pleased to announce the promotion of Silvia Onofri to a new role as CEO for the EMEA region, in addition to her current role as Vice President of Global Wholesale. During her time in Bally, Silvia has obtained outstanding results entering top tier multi-brand doors around the world and increasing Bally's footprint in Travel Retail to make the brand a global leader in the field.

Silvia has extensive experience in the global fashion and luxury industry, having first joined the Bally team 10 years ago, following key marketing roles in Bulgari.

“Silvia has the unique benefit of intimately understanding the Bally brand and it’s DNA, and having proven experience in forging new relationships with the world’s leading retailers and their customers. With this invaluable expertise in hand, I am confident that she will infuse the EMEA Retail division with enthusiasm, professionalism and unique market insights to take Bally to the next level in these crucial markets” -
Frédéric De Narp.

The arrival of Eva Quirrenbach and the promotion of Silvia Onofri are part of Bally Group CEO Frédéric de Narp’s ongoing strategic vision to infuse Bally’s prestigious brand identity with heightened dynamism, appeal and allure.
Both roles report directly to Bally’s Group CEO, Frederic de Narp.

EUROBIKE, the world’s leading trade fair for the cycling industry, included ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers discovered ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ joined this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? was held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel led the way, as they shared their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
 Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. The unbeatable collection of well-constructed fabrics that revolutionize the premium stretch market at the following EUROBIKE Exhibitors:

• M.I.T.I. SpA (IT)
• Maglificio Ripa (IT)
• Piave Maitex (IT)
• SITIP SpA (IT)
• SOFILETA (FR)
• Sportwear Argentona S.A. (ES)

• More than EUR 100 mn investment in sustainable production technology until 2022
• Lenzing is committed to improving the textile and nonwoven industries as a leader in sustainable fiber solutions
• UN-Sustainable Development Goals as guiding principles for Lenzing’s sustainability agenda
• All Lenzing sites strive to fulfill the EU Ecolabel standard by 2022

The Lenzing Group, producer of botanic fibers from wood, expands its environmental leadership commitment. As a leader in wood-based cellulosic fibers, Lenzing has particular responsibility and ambition to help raising the bar in sustainability in the textile and nonwovens industries. To fulfill this vision, Lenzing is continuing its ambitious roadmap by investing more than EUR 100 mn in sustainable manufacturing technologies and production facilities until 2022.
 
Lenzing’s circular operating models with closed loop production processes set the standard in the industry. In order to further extend the environmental leadership, a major part of this investment will focus on closed loop production technologies for the expansion of the sulfur recovery systems. The second area of investment will be in improving the effluent treatment units. In addition, Lenzing will upgrade its energy usage to more sustainable solutions reducing its greenhouse gas emissions due to the construction of a gas boiler at its site in China. This investment strengthens Lenzing’s sustainability leadership at its Viscose facility in Nanjing.
 
The investments underline Lenzing’s commitment to the United Nations Sustainable Development Goals (SDG) as guiding principles for its sustainability agenda. One of the most significant SDGs for the company is SDG 12: Responsible production and consumption.
 
Stefan Doboczky, Chief Executive Officer, comments: “The textile and the nonwoven industries face fundamental challenges related to sustainability. Lenzing is passionate to take a leadership role in addressing this and making the world a better place. Our holistic approach to sustainability underpins this scope. The new eco-investment program is a major step forward in our ambitions.”
 
“The United Nations Sustainable Development Goals are a universal call for a sustainable economy that protects the planet and ensures prosperity and well-being for all people”, states Lenzing Chief Commercial
Officer Robert van de Kerkhof. “With our REFIBRA™ technology, Lenzing is innovating to support a more circular, bio-based economy, contributing in particular to SDG 12”, he adds.
 
With the Lenzing Group sustainability targets announced in 2018, Lenzing strives to upgrade all its production sites to the ambitious European Ecolabel standard by 2022. As a result, Lenzing is one of the first companies to commit to a global sustainability-oriented manufacturing standard.

Penn Textile Solutions and Penn Italia introduce ECOINNOVATION, fully sustainable products range! These must-see products are created using the world’s first premium stretch yarn by ROICA™ that is Cradle to Cradle Certified™ Gold level for Material Health and Hohenstein Environment Compatibility Certificate for breaking down without releasing harmful substances.

Penn Textile Solutions and Penn Italia, a fully integrated international-minded company with over 50 years’ expertise in producing innovative warp and weft knit textiles that answer customers’ demands, including fantastic elastomeric knitted textiles.

Penn Textile Solutions and Penn Italia wisely picks ROICA™ premium stretch fiber to create our ECOINNOVATION, a new fully sustainable range of advanced textiles that are 100% sustainable. ROICA™, produced by Asahi Kasei, is the secret premium stretch ingredient we used to provide comfort, enhance quality and confidence. Thus, making stretch performance a specialty fiber that generates new values for contemporary consumers.

ECOINNOVATION presents seven unique articles developed belonging to Penn Textile Solutions and Penn Italia’s family dreamshape® characterized by reinforced edges and seizing that includes the following recycled items; tulle, tulle galloons with dreamshape® reinforced edge, tricot, dreamshape® reinforced gripping edge (great for cycling shorts), stretch satin, polyester tulle and polyester double jersey perfect for laser cutting.