From the Sector

Iluna Group is back at MarediModa (November 8-10), the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors, to present its latest innovations, with a focus on a new beachwear sets able to combine aesthetic research and environmental responsibility.

In terms of aesthetic innovation, exploration continues with matchy pareos and allovers, double laces with colorful charmeuses and multicolour laces enriched with iridescent effects (Lurex). A novelty of this season is the new double face printing on polyamide with a high sea fastness and iridescent effects on GRS-certified tulle.

The GRS certified Green Label collection uses Renycle® and Q-NOVA®, both GRS-certified pre-consumer recycled polyamide yarns in addition to the recycled stretch ROICA™ EF by Asahi Kasei.

The BIOLINE embraces the circular economy and presents proposals containing Amni Soul Eco® and ROICA™ V550. Moreover, the continuous path through the new dimension of responsibility continues in several directions: experiments with 16 different natural dyestuffs; and continued investment in technologies that can ensure significant savings in water and energy consumption, including GREENDROP, the new GOTS-certified digital pigment printing system.

• Commitment for a sustainable fashion industry

RadiciGroup participated in the third edition of PHYGITAL SUSTAINABILITY EXPO, which took place on 11 and 12 July in Rome. The event was focused on the ecological transition of fashion and design brands through technological innovation.

During the “narrated fashion show”, at the archaeological site of the Museo Dei Fori Imperiali, two sustainable garments by RadiciGroup were shown: the first completely recyclable ski suit made with recycled nylon and the Yamamay swimsuit made with polyester yarn obtained from recycling of plastic bottles.

Yamamay chose the sustainable polyester yarn Repetable® by RadiciGroup, for its new green beachwear proposal, with the aim of combining beauty and sustainability. Repetable is an innovative polyester yarn obtained through a process of recycling plastic bottles. Compared to virgin polyester, Repetable allows lower CO₂ emissions (-45%), lower water consumption (-90%) and lower energy consumption (-60%), while guaranteeing high performance. The new line “Edit” by Yamamay, which includes the swimsuit made with Repetable, has already been on the market since the end of last May.

The participation of RadiciGroup in the PHYGITAL SUSTAINABILITY EXPO represents further confirmation of the Group commitment to creating a fashion industry that is increasingly respectful of the environment, thanks to the involvement of all the players in the supply chain, which are most sensitive to sustainability.

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

EREMA Group K 2022 preview
In Düsseldorf, the subsidiaries of the EREMA Group - which are EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC - will present their technological innovations, services and support together at a Group trade fair stand for the first time. Seven new recycling systems and components will be presented that enable large-scale plants with a production capacity of up to 6 t/h while setting a milestone in recyclate quality and process stability. This is made possible by technological innovations in the plasticizing unit that have been specially developed for high throughputs with low specific energy consumption, the new EREMA 406 laser filter with a 50 percent larger screening area, and new digital assistance systems that will be launched at K 2022 and made available on the BluPort® customer platform. These include, for example, the PredictOn app, which helps to anticipate and eliminate imminent malfunctions based on continuous measurement and evaluation of machine data.

New series of machines for new target groups
For customers looking for rapidly available recycling systems for simple applications, EREMA Group subsidiary UMAC has an innovation in store for K 2022. The company, which has so far specialised in refurbishing and trading in previously owned equipment, is expanding its business area and in Düsseldorf will launch READYMAC, a standardised, prefabricated recycling solution that can be produced from stock, based on proven EREMA TVE technology.

Finally, in the inhouse recycling segment, PURE LOOP and PLASMAC will round off the wide range of machines offered by the group of companies with their product portfolio.

Live recycling and lighthouse projects at the Circonomic Center
In the outdoor area of the K show, EREMA will bring plastics recycling to life with live demonstrations in conjunction with cooperation partners. Different waste streams are processed for this purpose. The wide variety of high-quality applications for recyclate will be showcased in the "products made of recyclate" exhibition, ranging from technical components to consumer goods and food packaging.

Borealis – accelerating the transition towards a more circular future
Borealis is committed to using their expertise and global reach to advance the circular economy of plastics. At the joint Pre-K 2022 kick-off on June 13, Borealis provided a preview of their integrated way of circular thinking and featured topics and activities at the K Fair 2022 in October. The preview covered new technologies and innovations including new packaging and infrastructure applications of the Bornewables™ portfolio of circular polyolefin products, manufactured with renewable feedstocks. New applications for Design for Recyclability, Re-Use, chemical recycling and advanced mechanical recycling were also on display.

• Strategy and purpose affirm Borealis Group vision to be a global leader in advanced and sustainable chemicals and material solutions
• Sustainability at the centre of all activities, supporting OMV Group’s ambition for a net zero business by 2050
• Strong foundation supports continued geographic expansion with enhanced focus on Middle East and Asia, North America

Borealis announces the introduction of the Borealis Strategy 2030. At the core of this strategic evolution is sustainability, which is supported by the Borealis foundation of dedication to safety first, its people, innovation and technology, and performance excellence. This foundation powers continued geographic expansion and the ongoing transformation towards the circular economy. The strategy stipulates new and more ambitious sustainability targets with regard to greenhouse gas (GHG) emissions reductions, energy consumption, and the circular economy. Underlying the Borealis Strategy 2030 is an evolved purpose, “Re-inventing Essentials for Sustainable Living,” whose intent and spirit is shared across the OMV Group.*

* See attached document for more information.

Baldwin Technology Company Inc. has announced the installation of its TexCoat G4 finishing system at Graniteville Specialty Fabrics, a recognized leader in the production of specialty coatings and coated fabrics. With Baldwin’s cost-efficient and highly sustainable spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.

Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets, and others. The company excels in developing and sourcing custom coatings, and creating specialized technical solutions to meet specific, and often unique, end-user requirements. The installation of Baldwin’s TexCoat G4 is part of a major facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. This system utilizes non-contact precision-spray technology, ensuring precise finishing coverage with the exact amount of chemistry for reaching the optimal performance of the fabric. Changeovers (pad bath emptying, cleaning and refilling) are significantly reduced, resulting in substantial chemical conservation and increased productivity.

• The “new normal” by Südwolle: responsible, seasonless and high performance

The concept of seasonality in the F/W 2023/24 collection is increasingly vague, in favour of more functional categories in terms of performance, sustainability, innovative content and style.

Yarns are predominantly pure wool or blends, corresponding with the new concept of “dressing well” which is gaining ground among consumers – an individual style that promotes wellbeing at various times of the day, a fluid, personal idea of elegance, that fits daily activities with ease.

The new formal replaces the traditional suit with “smart casual” jackets and trousers -comfortable, and carefully cut, they feature quality materials that guarantee wearability as well as durability. Focus on these factors makes for more informed and less impulse buying.

The renewed interest in heritage is met with Südwolle's wool know-how and its basic essentials, updated to make them more sustainable by choosing certified fibres and chlorine-free anti-shrink treatments, for products with a longer lifespan thanks to domestic washing at low temperatures.

Sustainable innovation attentive to performance and durability goes hand in hand with the selection of earth-friendly recycled, recyclable and traceable materials blended with natural fibres.

Overview of the collection
The words inspiring the new collection are: sustainable, responsible, natural, recycled and high-performance.

A leading position goes to the OTW® line of weaving yarns made with Omega Twist® technology, developed and patented by Südwolle Group, which gives yarns enhanced performances in terms of reduced pilling, greater elasticity, strength and durability.

Espresso TEX Nm 48/2 (100% untreated wool,20.5μ) was created to value the authentic naturalness of wool. Made with undyed, untreated merino wool, it is a twisted yarn for weaving, ideal, for example, for flannel suits and jacket. It is available in 4 shades of brown obtained by mixing different percentages of untreated raw wool and undyed, naturally brown wool.
Eolo Nm 24/2 (100% wool 20.5 µ) is an example of circular production and reuse of recycled wool within the Karma project. Starting with in-house pre-and post-production waste, a partly carded, partly combed, product is created at Südwolle Group facilities where this type of process can be carried out.

Rhein GOTSNm 64/1 and Nm 64/2 (100% wool 19.5 µ) is the new pure woolyarn with GOTS –Global Organic Textile Standard certification, which certifies its organic provenance. The same traceable origin applies to Lerici GOTS X-COMPACT®Nm 60/1 (70% GOTS certified wool 19.5μ, 30% Schappe Mulberry silk), a glossy yarn with reduced pilling effect for improved anti-abrasion performance, obtained with X-COMPACT® spinning technology.

Performance paired with reduced energy consumption is the added value of SRP ClarkNm 60/2 (48% wool 23.5μ, 44% cationic polyester, 8% Donegal viscose), also available in a stretch version. The cationic polyester can be dyed blended with the wool, making double dying unnecessary and so saving on water and energy consumption. The addition of pre-dyed red, green or brown Donegal viscose to the blend creates a fluid look enhanced with slubbing and micro-nep effect.

Rosvic Nm 40/2 (98% wool 19.5μ, 2% Lycra®44 dtex) is a twisted yarn with Basolan treatment for comfort fabrics. It has a slightly textured surface with a contrasting or tone on tone micro mouliné pattern.

Key players among the circular knitting and hosiery yarns are Basak Nm 80/1(80% wool TEC. 20% polyamide 2.2 dtex), OTW® Barone GRS Nm 60/2(60% wool 23.5 µ TEC, 40% RENU™ recycled cationic polyester 2.2 dtex) and OTW®Concorde Nm 88/2(100% wool 19.3 µ TEC), available in the new colour cards.

• Based on high-tech finishing, responsible materials and certified partnerships
• With multicolored flock, zero water printing, chenille and metallic effects, the company is at the forefront in establishing a responsible lace supply chain

Legend has it that a sailor brought his beloved a seaweed from distant seas as a gift. The woman, wanting to preserve its beauty, replicated the design and holes with needle and thread. And so lace was born. Since that moment, lace has lived within the walls of churches and castles, visited race tracks and catwalks, changing shape and color according to seasons and times.

Among the companies involved in writing a new chapter in the history of lace, Iluna Group definitely stands out. Founded in 1970 from an idea of its founder Luigi Annovazzi, over the years Iluna has responded to the challenges posed by the market in terms of technology and sustainability.

Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.

There are four main proposals presented by Iluna Group during Milano Unica:

• Flock in flounce or allover entirely made with recycled ingredients and equipped with endless printing possibilities, with 3D and multicolor effects that allow the inclusion in fashion, underwear and athleisure looks. All certified GRS (Global Recycled Standard).
   
• Continued investment in both the Green Label and Bioline, two collections totally dedicated to innovative and responsible aesthetics. Both include lace made with the responsible 6.6 polyamide yarn Amni Soul Eco® and the degradable stretch fiber ROICA™ V550, combined with natural vegetable dyes with OEKO TEX and GOTS certifications.
   
• The union of a chenille yarn blended with FSC-certified viscose and Renycle® yarn, a product obtained by recycling nylon 6, a high-value material with excellent strength, dyeing, softness and versatility, gives life to surprising new Textronic. The embossed designs with 3D effect create a cloud effect that, combined with Lurex, gives unexpected glows.
   
• GRS-certified tulles printed with GREENDROP technology, the new GOTS-certified digital pigment printing system, with lower energy consumption and low water waste, thanks to an internal closed-circuit process for water recycling.

• High-Performance Solutions and Protection Effects

Huntsman Textile Effects, a global leader in innovative and sustainable textile dyes and protection effects, is bringing a complete suite of solutions for performance apparel, technical textiles and casual wear to Colombiatex de las Américas 2022 from January 25 to 27.

Sustainable solutions
Huntsman Textile Effects will showcase the latest addition to the third generation of its AVITERA® SE polyreactive dye range; it delivers brilliant bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also outperforms the best available dyeing technologies for cellulosic fibers and blends in terms of value by reducing recipe costs, minimizing processing costs and eliminating reprocessing.

ERIOPON® E3-SAVE is another next-generation water-saving innovation. An all-in-one textile auxiliary for polyester processing, it allows pre-scouring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products. This shortens processing time and saves water and energy.

rPET processing innovations
As leading brands begin to work towards a circular economy for textiles, mills are being asked to overcome challenges associated with transforming recycled polyester (rPET) into high-quality new textiles. Huntsman Textile Effects is presenting an end-to-end solution for achieving full whites and consistent shades on rPET with right-first-time quality. This eco-friendly rPET processing solution includes pre-treatment chemicals, fluorescent whitening agents, state-of-the-art washfast dyes, and finishing solutions for high-performance protection and comfort.

Washfast disperse dyes for polyester and man-made fibers
TERASIL® BLUE W is the latest addition to Huntsman’s TERASIL® W/WW range of washfast disperse dyes for polyester and man-made fibers and their blends. Crucially, it is not sensitive to reduction, leading to higher reproducibility, higher right first-time results and operational excellence. It also reduces overall water and energy consumption, as well as water effluent. TERASIL® BLUE W offers high build-up for deep blues that stay vibrant.

Next-generation odor control
In partnership with Sciessent, Huntsman Textile Effects presents antimicrobial and odor-control solutions to Colombiatex to enable mills to produce garments that smell fresh for longer and need less frequent washing. Featured is Sciessent’s new anti-odor technology - NOBO™. It is specifically designed to reduce odors in natural and synthetic fabrics; it can be incorporated into virtually any fabric. From base layer and activewear tops to socks and underwear to jeans and chinos. It offers a cost-effective way to upgrade everyday products and add value to your customers.

“Sustainability is becoming a priority for regulators in South America and around the world, and consumers are increasingly keen to make a difference by choosing green brands,” said Ben Powell, Commercial Director Americas, Huntsman Textile Effects. “Huntsman is redefining what’s possible to help textile and apparel companies make the shift to more environmentally sustainable operations while enhancing their competitiveness at the same time. Our innovations make it possible to benefit from efficiency gains and resource savings in the factory as you deliver products that stand out in the market.”

Monforts textile technologist Jonas Beisel will outline the benefits of the company’s Econtrol® continuous dyeing process during the next free-to-attend VDMA Textile Machinery Webtalk which takes place on February 3rd 2022 at 13.00 (CET).

“Our customers are increasingly looking at shorter production runs and the more economical use of dyestuffs, as well as reducing water and energy consumption,” says Beisel. “We have gained many years of experience in the optimisation of dyeing processes through working with our customers, both at their own plants and in our Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

“Our Thermex universal hotflue for continuous dyeing, curing and thermosoling achieves unrivalled reliability even at high fabric speeds, for exceptional cost-effectiveness when dyeing both large and small batches of woven fabrics. The Econtrol® process for reactive dyestuffs now has an impressive number of references on the market, as a quick and economical one-pass pad-dry and wash off process. This is the ideal process for fast change technology and operational savings.”

Among key benefits are the saving of resources compared to conventional continuous dyeing methods, excellent reproducibility of pale to dark shades, from lab to bulk, and greater flexibility in production planning due to a resulting dry fabric that does not need an immediate wash off.

Econtrol® is a registered trademark of DyStar® Colours Distribution GmbH, Germany, and Bertram Seuthe of DyStar® will be providing recommendations for dyes and auxiliaries for the process during the VDMA event.

A third speaker, Guido Seiler of Fong’s Europe, will explain how Goller washing ranges help to significantly reduce the water that is conventionally wasted in the washing off process, through a combination of process and chemistry know-how and advanced technologies.

Alchemie Technology, an innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.

While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.  

Fabric dyeing is the most polluting part of fashion and activewear manufacturing, involving industrial scale dye baths and huge amounts of dye chemicals, steam, electrical power, and consequent high CO2 emissions.  Repeated washing of the dyed fabric, required to remove dye residue, is responsible for 20% of the world’s wastewater pollution and excess dye is discharged into waterways, affecting the health of some of the world’s poorest communities. In more regulated areas, water pollution is reduced through reliance on energy intensive water treatment plants.

However, an environmental step change can be achieved by adopting new digital technology that can dye fabrics with an 85% reduction in energy consumption and a dramatic 95% reduction of the 1.3 trillion litres of water currently used by the industry each year.

For example, dyeing one polyester shirt using current methods generates 4.5 litres of wastewater and produces 0.17 Kg of CO2, compared to low energy digital technology, which uses less than 0.2 litres of water and reduces carbon emissions to 0.03 Kg.  Multiply these numbers by the billions of garments dyed each year and the scale of the environmental problem, if nothing changes, is clear to see. Equally, the amount by which the textile industry can improve its carbon footprint is dramatic and can be done quickly if action is taken now.