From the Sector

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

ACIMIT president Alessandro Zucchi stated that, “The orders index data for the fourth quarter confirms what had already been observed in the previous quarters in 2022. After a sharp increase in 2021, this decrease in orders for the past year is physiological. Furthermore, the ongoing war between Russia and Ukraine, with its related consequences on daily business and trade, and a macroeconomic framework in which uncertainty prevails, have further negatively affected the orders intake.”

Data for the last quarter does not suggest a reverse in the negative trend for the first months of 2023. Declining energy prices and inflation, although still high, also declining slightly are, however, signs of a light improvement in the business of companies in the sector as well. “We need to look to the current year with optimism,” continued ACIMIT president. “Our member companies are already focusing on ITMA, the upcoming global textile machinery industry trade fair, that will be held from June 8-14 in Milan.” “I am confident that ITMA Milan can represent an opportunity for further development of the Italian textile machinery sector,” concluded Zucchi. “The technological innovations that our manufacturers will bring to the trade show will meet the textile industry’s need to be increasingly sustainable, both environmentally and economically.”

The Sustainable Apparel Coalition (SAC), an independent and impact-creating organization that brings together around half of the apparel industry to enable positive social and environmental impact at scale, announces its strategic partnership with the Bangladesh Apparel Exchange (BAE) for its fourth edition of the Sustainable Apparel Forum. The event aims to bring together stakeholders to discuss and exchange ideas on how to advance sustainability within the textile and apparel industry.

Taking place on March 15 and 16, 2023, this year’s Sustainable Apparel Forum will focus on five key subject areas of the apparel and textile supply chain: circular economy, climate impact & action, renewable energy & green funding, skill development and green job prospects & challenges. Delegates in attendance will include, garment manufacturers, brands and retailers, development partners, foreign missions and embassies in Bangladesh, impact creating organizations, apparel and textile associations, industry leaders, government officials, secretariats and ministers.

The first day of the forum will be geared towards roundtable discussions and workshop sessions on circularity, while day two, the main conference day of the event, will feature panel discussions, presentations & keynote speeches along with strategic guidelines from government officials and industry leaders.

Vidhura Rapanawe, Board Director, Andrew Martin, VP, Membership and Stakeholder Engagement, and Joyce Tsoi, Director of Collective Action Programs, along with other team members, will represent the SAC, including participation in a discussion on decarbonization and what it will take for the industry to achieve the necessary reduction of carbon emissions. The SAC will also actively participate and organize a special workshop for manufacturers as part of their continued stakeholder engagement efforts.

Global leading companies from more than 15 countries in the filtration and separation industry will connect with some 1,500 industry professionals and launch their innovations at FiltXPO™ 2023, Oct. 10-12, at Navy Pier in Chicago, Illinois.

FiltXPO™, an exhibition and conference dedicated exclusively to filtration and separation, is now being held on an 18-month cycle, making it a valuable opportunity to generate new business and grow global relationships with unique exposure to the North American market, according to INDA.

FiltXPO™ will draw senior-level professionals from around the world in major market segments involved in the design, manufacture, sales, and use of filtration/separation products and services.

A feature of the event will be the technical conference – Summit for Global Change. Five panels of global industry experts will debate filtration and separation’s most compelling challenges such as indoor air quality, filtration sustainability, standards and technologies. FiltXPO™ will also offer a one-and-a-half day intensive training course on the development, testing and application of filtration and separation media.

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Nine designers were challenged to create fashion capsules in eight weeks utilizing the latest technology innovations from the three alliance partners – combining digital product creation, web3-based design, digital printing, immersive circular design, 3D rendering and avatar development. All collections are on display exclusively at Berlin Fashion Week from Wednesday, January 18 to Friday, January 20 at Bikini Berlin.
 
The challenge follows standing room only Kornit Fashion Week events across the globe, displaying how on-demand, digital production creates a fashion world of nearly endless creativity. Hosted at the Impact Hub Berlin, the VORN Academy Program offered creators access to a holistic technology toolset - including the advanced Kornit Presto MAX single-step solution for direct-to-fabric sustainable printing. Some of the prominent designers taking part include costume and fashion designer Alexis Mersmann, Judith Bondy, AR and NFT artist Ann-Britt Dittmar, Berlin-based director Tanja Bombach, Nina Jurcic, Olga Boncheva, digital artist, and fashion designer Schirin Negahbani, Johann Erhardt, and Israeli designer Idan Yoav.
 
"This collaboration across four industry leaders is so unique because the result is a sum so much greater than each of its individual parts. It's a true 'alliance of the willing' that opens doors to 'phygital' collections built at the intersection of digital fashion, 3D design, and on-demand production," said Omer Kulka, Chief Innovation Officer at Kornit Digital. "We're honored to team with VORN – The Berlin Fashion Hub, Zalando, and Unity during Berlin Fashion Week to demonstrate what's possible as the physical and virtual fashion worlds come together."
 
"When we launched the Berlin Fashion Hub, our intent was to create a B2B environment to spark unmatched fashion and sustainability innovations. As Berlin is one of the world's most important fashion and textile centers, there is no better place to demonstrate economically succesful circularity in the fashion industry," said Professor Marte Hentschel, Co-Founder at VORN – The Berlin Fashion Hub. "Together, we're changing fashion to drive sustainability and harness the creative power of both the physical and virtual. We're proud of what's been accomplished in conjunction with an incredible group of designers, creators, and partners."

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

Next to David Shah (View-Publications), the panel will include Siems Luckwaldt (CAPITAL and BUSINESS PUNK, RTL Germany), Shamin Vogel (WeAr Global Magazine), Ben Hanson (The Interline), Maria Cristina Pavarini (The SPIN OFF) and Carl Tillessen (DMI)

Digital Era
From digital colour apps, digital twins and virtual models to 3D simulation and virtual dressing rooms - the world of digital fashion will not only be discussed in numerous lectures in Munich, but also brought to life in the new Assyst Experience. Whether it's Carola Seybold, Head of Global Key Accounts at Pantone, Jan Hilger from Roland Berger, Arndt Johannes from Verce, Dr. Stefan Hauswiesner, CEO of Reactive Reality or the experts of the panel "Textilfabrik X.0 - New Marketing Buzz Words or One Step Ahead": everyone will be looking at virtual fashion from a different angle and providing insights into the latest state of the art. In her trend presentation "The weird & wonderful world of fashion cores" at BLUEZONE, Angela Velasquez (Rivet) sheds light on how viral TikTok trends are reshaping denim merchandising.

Sustainable Future
Digitisation and sustainability - the third major theme of the event programme - could not be more closely intertwined. Lisa Lang, Director of Policy & EU Affairs Orchestrator of EIT Climate KIC in an interview with Muchaneta ten Napel (Shape Innovate) kicks things off about the importance of a green transformation for the industry. Other topics in focus: Liv Simpliciano from Fashion Revolution gives an overview of where the world's biggest fashion brands and retailers stand in terms of transparency. Tricia Carey from Renewcell, David Shah (View-Publications), Lien van der Schueren and Guy Buyle (CISUTAC & HEREWEAR), Mateusz Wielopolski (Circulix) and Mario Malzacher (Circular.Fashion) critically discuss whether the circular economy is really the solution for everything or just a placebo. Circular ecosystems are also presented by Franziska von Becker from Hachmeister & Partner.

The race of the new sustainable materials of the future will be opened by Kirsi Terho from Infinited Fiber, Kuben Edwards from Onezero8, Marianne Uddman from Trustrace and Simon Angel, Sustainable Innovations Curator of MUNICH FABRIC START in a panel discussion with Muchaneta ten Napel (Shape Innovate). New products for a sustainable future in the denim industry will be discussed at BLUEZONE.
Another highlight: In cooperation with the Transformers Foundation, an expert panel will also be held at BLUEZONE on both days of the trade show.

Trends Spring.Summer 2024
Gerd Müller-Thomkins, Carl Tillessen and Niels Holger Wien from the Deutsches Mode Institut (DMI) see a "vibe shift" - a turning point. They will analyse what this means for fashion in their trend presentation on Wednesday. The Women's Fashion Trends SS 24 with the must haves of the season will be analysed by Karin Schmitz from the Trend Forecast Institute Peclers Paris - from the glamorous appearance in everyday life, to the play with gender identity, to simplicity combined with functionality and mobility.

The 11^th edition of India ITME 2022, a textile engineering and technology B2B Exhibition, was hosted in IEML, Greater Noida, U.P. under participation from 68 countries. It showcased more than 1600  Live machinery and unveiled 69 new products.

After a gap of six years, the event recorded a high flow of quality visitors - approx. 87,400 unique visitors - which included industry members, technocrats, academicians, students and government officials apart from the delegations from 13 countries lead by senior officials of respective country who are looking to engage with India as sourcing and trade partner for developing their textile industry.

The high-profile technology & engineering exhibition for textiles witnessed participation from leading Indian institutes for textile engineering such as VJTI Mumbai, DKTE Ichalkaranji where MOU’s were signed for knowledge exchange with Swiss Textile Machinery Association and Italian Textile Machinery Association, paving way for collaboration not only in business but also in technical education.

The six-day event carried forward its theme “Empowering Textile Through Technology” encouraging indigenously developed innovations and research by Indian companies.

The six-day event set the foundation for upgradation and modernization of the textile industry of India which is the 2nd largest employment generation sector after agriculture.

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Being able to walk again despite a serious injury, handle heavy parts without outside help or simply do overhead work comfortably and for extended periods of time - the advantages of exoskeletons have already convinced numerous industries. Exoskeletons and wearables are now already being used successfully in industry and commerce, and major machine builders and automakers as well as the medical sector are continuing to experiment with man-machine connections. Currently, the global market volume for exoskeletons is valued by leading analysts at over US$20 billion by 2030.¹

The WearRAcon Europe Conference 2023 will provide new insights into the promising world of exoskeleton systems from different perspectives and, in conjunction with the A+A Congress, set future-oriented impulses. Lectures by renowned exoskeleton pioneers combined with testimonials presented by users from a variety of industries and keynotes by experts will round off the programme. And, like at the previous A+A, a Self-Experience Space will again be set up so that the exoskeleton systems of various manufacturers can be tested in realistic work scenarios.

In parallel with the Self-Experience Space, the large live study Exoworkathlon will also take place again. Trainees from various mechatronic training courses have to complete a concourse and perform holding, lifting and assembling tasks, which have been specially developed with the industry. Data is prospectively collected with different measuring sensors to measure the effects of exoskeletons. In the Exoworkathlon, the IPA focuses especially on prevention for young employees in order to raise awareness of the issue and counteract ailments at an early stage.

¹ (Interview Trans.INFO mit Armin G. Schmidt, CEO von German Bionic (01/2021).

The 11^th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

Groz-Beckert will also be demonstrating its competence as a system supplier in the field of warp knitting at the India ITME. The warp knitting machine needles and system parts from Groz-Beckert are precisely matched to one another and achieve a uniform and flawless warp knitting process.

With the WarpMasterPlus and the KnotMaster, the Weaving product division presents the latest generation of drawing-in and knotting machines from Groz-Beckert. They are particularly distinguished by their ease of operation and flexibility.

The product area Felting (Nonwovens) presents its product and service highlights for the nonwovens industry. These include the HyTec P jet strip for spunlace customers as well as the GEBECON felting needle, the dur needle, EcoStar felting needle and the Groz-Beckert customer product. The HyTec P-nozzle strip is characterized by improved handling and higher hardness. The patented GEBECON felting needle offers an improved surface finish and optimized breakage bending properties.

The Carding product area will present its further developments for the spinning industry. These include the new stationary flat series, the TV56 revolving top and the cylinder wire set with special tooth geometry. The new stationary flat series is characterized by an innovative tooth geometry and a new type of tooth distribution. The new TV56  revolving top with its new setting pattern and 560 points per square inch is particularly easy to clean. The improved cylinder wire convinces with its special and patented tooth shape, which has a positive effect on the maintenance effort. This makes it particularly suitable for quality-oriented cotton spinning mills producing high-quality yarns. Visitors can also look forward to the new InLine card clothing series for the nonwovens sector.

In the Sewing exhibition area, the focus is on technical textiles – in particular the manufacture of car seats. The answer to the high demands of sewing car seats is the special application needle SAN® 5.2 from Groz-Beckert. The special geometry gives it sufficient stability. The double groove at the point improves thread guidance and leads to a uniform seam pattern, especially in multidirectional sewing processes. The scarf chamfer on both sides of the needle prevent skipped stitches and optimize loop formation. The wear protection is increased by the titanium nitride coating GEBEDUR. In addition, the quality management INH will be exhibited and the functions and contents of the customer portal will be presented.

The philosophy guiding Officina39's innovation and development ranges fluidly between exploration of color, denim heritage and artistic expression, but has sustainability and the search for environmentally friendly chemical solutions for the fashion industry as its cornerstones. This is the core vision that accompanied the Italian company, when presenting its latest technologies and collaborations at Denimsandjeans in Tokyo from November 1-2.

Denim & Art
Juan Manuel Gomez, Officina39 Creative Leader, represents the company’s multidisciplinary approach and combines artistic expression with a thorough technical experience. His explorations were drawn on the Denim Art Wall at the fair. Furthermore, in the interactive seminar “Art & Denim As A Process Of Repetition” he explained that there is a constant act of repetition as automatic drawing or pictorial act in the processes of the textile industry.

The SS24 collection
The Multicolor Denim Dreaming collection is a combination of several Officina39’s sustainable key technologies:

• Nebudye D: a wide range of fresh colors to obtain a unique dyeing effect in nebulization/fog system machinery and can be discharged in a creative way with Oz-One Powder, an advanced product to give garments a bleached yet eco-friendly treatment, and Remover IND/J-N, Officina39’s solution to replace the use of Potassium Permanganate (PP) on denim and obtain a worn and distressed vintage look.
• Novantic series: a combination of selected dyestuffs with a special mordanting agent suitable to obtain surface dyeing to provide vintage or old look effects.
• Recycrom™: a patented dyestuffs range obtained through a cutting-edge upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications. Its sustainable and revolutionary powders assure a whole universe of denim effects: from classic authentic vintage to acid wash look (Eco Marble), from printed effect (Indigo Replica) to worn and distressed vintage look (Recycrom™ Dirty).
• Just One Step Process: an innovation that saves time, energy, space and of course water, by combining several phases of the Aqualess Mission at the same time: a raw garment enters the machine and a garment with a basic vintage effect comes out ready to be dried, already treated, bleached and softened.
• Remover Activator: a technology that in combination with PP replacement products creates in one step general bleaching, localized corrosion and highlights effects on jeans.

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

As of October, 144 exhibitors from 10 countries and regions (China, Greece, Germany, Hong Kong, India, Italy, Singapore, Taiwan and Thailand) have signed up for JIAM 2022 OSAKA to showcase their latest products and services. Of these, 39 companies (21 domestic, 18 overseas) will be joining the fair for the first time. In addition, two pavilions from Germany (VDMA; Mechanical Engineering Industry Association) and Taiwan (TSMA; Taiwan Sewing Machinery Association) will bring even more product diversity to the show floor. The previous edition of JIAM OSAKA in 2016 welcomed 258 exhibitors from 15 countries and regions as well as 15,257 visitors from 72 countries and regions, mainly from Bangladesh, China, India, Korea, Taiwan, Sri Lanka, and Vietnam.

A wide variety of special seminars
11 special organiser seminars will not only provide relevant industry knowledge, but also offer practical skills for daily work:

• Manufacturing industry and digital technology
  Mr Atsushi Yasuda, Manager of Ministry of Economy, Trade and Industry Manufacturing Industries Bureau,Industrial Machinery Division
• Skills training seminar
  1. Twist Jacket (Lapel) pattern and matching sewing (front and shoulder seams)
  2. Shoulder keeper (prevent shoulder collapse) cherish a piece of clothing
  Mr Susumu Inarida, Emeritus Professor of Bunka Fashion Graduate University (BFGU) / Specially Appointed Committee Member of Japan Modelist Associate / Contemporary Master Craftsman Certified by the Ministry of Health, Labor and Welfare
• "Mottainai!" sustainable initiatives from Osaka!
  Common points between Senshu Towl and OSAKA KABAN and the future
  Mr Eiji Shinoda, President of Shinoda cCorp
  Mr Kenji Fukuroya, Representative Employee of Fukuroya Joint Company etc.
• About the sustainable fashion community “NewMake”- Upcycling initiatives in collaboration with brands
  Mr Tac Hosokawa, CEO of Story & Co.
• Win - win strategy on underwear sewing, viewpoint of BISEI SANGYO Co., LTD
  Mr Toru Miyawaki, Managing Executive Officer of BISEI SANGYO Co.,LTD / Chairman of Hikoneseni Cooperative

Home Sewing Machine Zone
Catering to the B2C market, the Home Sewing Machine Zone, will feature major domestic household sewing machine suppliers. To promote the joy of sewing, a special workshop will be organised by Brother Industries Ltd, Janome Corp, JUKI Corp and JASMA covering topics such as the use of upcycled materials. As part of JIAM 2022 OSAKA’s sustainable development goals, visitors will be taught to sew “cup sleeves” using discarded items and materials from the DIY brand WHTATNOT. Attendees will also learn about upcycling, the process of upgrading unwanted items into new products that are useful. Another highlight will be the awards for JASMA’s “42th Home Sewing Competition for Elementary, Middle, and High School Students”.