From the Sector

Reset
248 results
intertextile, Shanghai (c) Messe Frankfurt GmbH
20.02.2018

Intertextile Shanghai Apparel Fabrics – Spring Edition 2018, 14 – 16 March 2018

As the global textile industry’s most comprehensive sourcing summit for the spring / summer season, Intertextile Shanghai Apparel Fabrics is naturally the ideal place to find the latest developments in product innovation and sustainability. This is especially true in the fair’s Beyond Denim zone, which this edition will feature over 110 exhibitors from China, Japan, Pakistan, Turkey and elsewhere. Adding to a total of some 3,300 exhibitors from around 22 countries and regions, they provide sourcing options for the entire industry, from fabrics for ladieswear, menswear, suiting, shirting, lingerie and swimwear to high-end wool fabrics, original pattern designs, functional & performance fabrics, sustainability products & services, digital printing technologies, garment & fashion accessories and more.

As the global textile industry’s most comprehensive sourcing summit for the spring / summer season, Intertextile Shanghai Apparel Fabrics is naturally the ideal place to find the latest developments in product innovation and sustainability. This is especially true in the fair’s Beyond Denim zone, which this edition will feature over 110 exhibitors from China, Japan, Pakistan, Turkey and elsewhere. Adding to a total of some 3,300 exhibitors from around 22 countries and regions, they provide sourcing options for the entire industry, from fabrics for ladieswear, menswear, suiting, shirting, lingerie and swimwear to high-end wool fabrics, original pattern designs, functional & performance fabrics, sustainability products & services, digital printing technologies, garment & fashion accessories and more.

Denim enriched with volcanic ash: the latest innovation from Orta Anadolu
Volcanic ash is not uncommon in beauty products – it is known as Mother Nature’s skin purifier after all, and used as an exfoliator for example – but it is far less common in the textile industry. Orta Anadolu are set to change that with their BIOWARE denim which is enriched with mineralised volcanic ash to create an odour absorbing effect. This technology captures and absorbs odour compounds that would normally pass through the fabric, neutralising bad bacteria while retaining the helpful bacteria that common deodorisers, which contain harsh substances, normally eliminate. This leads to a more environmentally friendly product that is better for the user’s skin.

Orta will also be presenting BIOCHARGE at Intertextile, which, according to the company, is the world’s first denim fabric for muscle wellness. Infused with minerals, Orta state that BIOCHARGE is medically proven to refresh muscles, relieve muscle tension and optimise body balance. They will also present their BOUNCE stretch range, with high elasticity and a ‘street’ style, while CHRONICLE, another in their S/S 19 range, is a blend of heritage and future styles.

US Denim Mills blend tomorrow’s technology with yesterday’s style
Another innovative denim firm exhibiting at Intertextile Shanghai, and another blending old and new, is US Denim Mills. According to the company, their collection at the fair will “harness tomorrow’s textile advances to revitalise the great style visions of the past by adding fashion, comfort, performance and sustainability advantages to authentic denim looks.” This collection includes:

• Selvedge: using the company’s legacy selvedge looms to produce bi-stretch ‘SelvedgeX’ while experimenting with blends of natural yarns and high-tech fibre blends in its ‘HeritEdge+’ range
• Stretch: including ‘Flex 360’ bi-stretch denim with a slight cross-bias freedom, and ‘Modern Stretches’ with a higher stretch range for intense comfort
• SoftWear: advanced finishing treatments for superior soft touch from natural fibre blended yarns and softness-selected weaves
• Sustainable: new additions to the range of recycled and natural ‘GreenEgo’ denims

Kipas Denim step up their sustainability efforts
Well aware of the effect denim production has on the environment, Kipas Denim’s multi-faceted programme to address this is one of the most comprehensive in the denim sector. Their recycled yarn initiative includes recycling waste yarn from the production process, while it also takes waste cotton yarn and blends it with REPREVE® fibres to create an eco-friendly denim fabric. Kipas also uses BCI cotton and organic cotton, and targets each to be 15% and 5% of total consumption, respectively. Furthermore, their Conservablue technology aims to reduce the environmental impact of the dyeing process by eliminating the use of rinsing overflow boxes before and after the indigo dye boxes, as well as ensuring 100% of applied dyestuff remains on the yarn in the rinsing bath.

As well as the overseas offerings, a wide range of domestic denim exhibitors covering all price and quality points will also feature in Beyond Denim. Some of the more notable brands participating include Advance Denim, Black Peony, Guangzhou Foison and Prosperity Textile.

Denim’s ‘next move’ to be debated in INVISTA panel discussion
The market is changing and so must apparel and textile manufacturers. Low prices and discounts are no longer driving sales the way they used to. Today’s consumer wants better quality, appreciates new technology and is evolving their casualwear style. This is the premise behind the INVISTA-sponsored panel discussion which will take place on day 1 of the fair. Titled ‘Denim’s Next Move – New Opportunities to Keep Growing Sales of Jeans and Casualwear at Retail’, participants will learn what consumers really want in jeans and casualwear, the return of chinos and new fabric technologies that are energising casualwear.

The panel will be moderated by Jane Singer, Director and Head of Market Development at Inside Fashion. Panellists will include representatives from Advance Denim, Guangzhou Conshing Clothing Group, Prosperity Textile and Texhong who will share their latest innovations that will help brands and retailers drive sales and profits.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

Oerlikon Neumag at Domotex Asia 2018 Oerlikon Neumag’s Sytec One guaranties an economical BCF Carpet Yarn production for challenging processes.
13.02.2018

Oerlikon Neumag at Domotex Asia 2018

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

This BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98% for ten breakages a day, while a plant with three-end technology only reaches around 92%.

Faster processes due to a straight yarn path

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15% in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

Optimised key component: spinning pack

Last but not least, the engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

The product mix is decisive

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes or in general when demanding processes take up an increasing share in the business. "The product mix is decisive for the choice of technology," sums up Alfred Czaplinski, Sales Manager BCF at Oerlikon Neumag. "We are happy to advise on the optimal solution and offer both single-end and three-end plant technologies." 

Good business at the Domotex Hanover, Germany

In the run-up to the trade fair, the Domotex Hanover in mid-January was already proving to be a promising harbinger. With four lively trade fair days and contract conclusions in the lower double-digit million euro range, mainly from the European and Asian markets, the order intake for Oerlikon Neumag was very good.

More information:
Oerlikon Neumag Domotex
Source:

Oerlikon Textile GmbH & Co. KG

SITIP and ROICA™ introduce new Heat Generating technology at the ISPO Munich © SITIP and ROICA™
BeHOT with ROICA™ for Modern Action Living
28.01.2018

SITIP and ROICA™ introduce new Heat Generating technology at the ISPO Munich

At the upcoming ISPO exhibition, SITIP are pleased to introduce BEHOT, a SITIP Heat Generating Technology for fabrics that has been licensed from the unique ROICA™ StretchEnergy™ System by Asahi Kasei and is already adopted by Santini that is offering Premium cycle wear Made in Italy since 1965.

SITIP is a leading Italian textile company specialized in high-tech and function-rich innovations for sport, technical underwear, shapewear, beachwear, footwear components, protective helmets, and in particular Velcro-receptive fabrics for mechanical fastening systems and a number of innovative technical fabrics for other industrial end-uses, all made through key manufacture technologies that include weft & warp knit fabric innovations.

Further, SITIP has more recently launched 16 unique trade brands, each one specialized in highly advanced innovation solutions designed to fit both market and the discerning needs of the contemporary consumer.

At the upcoming ISPO exhibition, SITIP are pleased to introduce BEHOT, a SITIP Heat Generating Technology for fabrics that has been licensed from the unique ROICA™ StretchEnergy™ System by Asahi Kasei and is already adopted by Santini that is offering Premium cycle wear Made in Italy since 1965.

SITIP is a leading Italian textile company specialized in high-tech and function-rich innovations for sport, technical underwear, shapewear, beachwear, footwear components, protective helmets, and in particular Velcro-receptive fabrics for mechanical fastening systems and a number of innovative technical fabrics for other industrial end-uses, all made through key manufacture technologies that include weft & warp knit fabric innovations.

Further, SITIP has more recently launched 16 unique trade brands, each one specialized in highly advanced innovation solutions designed to fit both market and the discerning needs of the contemporary consumer.

Santini is offering to the market a multi-panel thermal bib tight for the coldest winter training. Made with the special BeHot fabric by Sitip, constructed with the ROICA™ StretchEnergy™ active performance material, it not only insulates, but generates up to 2 degrees of heat as you workout as certified by CeRism, Outdoor Sport Research Centre at Verona University. Complete comfort and protection thanks to the Acquazero by Sitip treatment that ensures you stay dry even in the most challenging conditions.

The design is completed with breathable mesh braces for added comfort and a reflective pixel detail on the leg to improve visibility in low light conditions. BeHOT represents a special combination of a highly refined type of knitted construction combined with this unique ROICA™ Premium Stretch yarn function, and has been especially developed for this new high-function concept.

More information:
ISPO Munich SITIP ROICA
Source:

GB Network Marketing Communication

Oerlikon Neumag at Domotex 2018 ©Oerlikon Neumag
The Sytec One from Oerlikon Neumag guarantees cost-efficient BCF yarn production in demanding processes.
11.01.2018

Oerlikon Neumag at Domotex 2018

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15%. In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. "The product mix is critical to the choice of technology," said Martin Rademacher, vice president of sales Oerlikon Neumag. "We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology."

More information:
Oerlikon Neumag Heimtextilien
Source:

©Oerlikon Marketing, Corporate Communications & Public Affairs

Intertextile Shanghai Messe Frankfurt Exhibition GmbH
31.10.2017

Intertextile Shanghai Autumn 2017 - Final Report

Intertextile Shanghai concluded its 2017 Autumn Edition on 13 October as the strong business results and praise from the worldwide participants once again affirmed its reputation as the world’s most effective apparel fabrics and accessories trade event in terms of boosting sales and product sourcing. Knowing the fair covered an all-encompassing range of products that cater to all sourcing needs, 77,883 buyers travelled from 102 countries and regions (2016: 73,927, 90 countries and regions) to Shanghai to source. This year, Hong Kong, India, Indonesia, Italy, Japan, Korea, Russia, Taiwan, the UK and the US were the top 10 visitor countries and regions after Mainland China.

Intertextile Shanghai concluded its 2017 Autumn Edition on 13 October as the strong business results and praise from the worldwide participants once again affirmed its reputation as the world’s most effective apparel fabrics and accessories trade event in terms of boosting sales and product sourcing. Knowing the fair covered an all-encompassing range of products that cater to all sourcing needs, 77,883 buyers travelled from 102 countries and regions (2016: 73,927, 90 countries and regions) to Shanghai to source. This year, Hong Kong, India, Indonesia, Italy, Japan, Korea, Russia, Taiwan, the UK and the US were the top 10 visitor countries and regions after Mainland China.

Meanwhile, a total of 4,538 exhibitors from 32 countries and regions (2016: 4,553, 29 countries and regions) also enjoyed the surge of business potential brought by this large number of high-quality trade buyers. The strong line-up of exhibitors, including 10 country and region pavilions – France, Germany, Hong Kong, India, Japan, Korea, Milano Unica (Italy), Pakistan, Taiwan and Thailand – as well as 10 Group Pavilions organised by foremost industry leaders like DuPont, Hyosung, INVISTA and Lenzing, presented a full-spectrum of innovative and fashion offerings in 11 halls across 276,000 sqm (gross) exhibition area, an increase of nearly 6% compared to 2016.

While the nature of textile trade fairs has evolved over recent years, exhibitors’ successful results at this year’s Intertextile Shanghai shows that it is still the industry’s most effective order-writing and business development trade show because it remains the event where the global industry gathers to make purchasing decisions. As a result, many exhibitors see the fair as their business growth engine, and reported positive outlooks for sales after the fair.

 

Exhibitor opinions
 Ms Erika Jimenez, Development and Purchasing Department, Luca Cuccolini, Spain (SalonEurope)
“A few years ago we decided to explore the Chinese market. Knowing that Intertextile Shanghai is the most comprehensive fair of its kind in Asia, there was no doubt that this would be the fair to expose our brand. Throughout the years we have been satisfied with the visitor flow and business opportunities, especially this year. There has been a good flow of a diverse range of buyers visiting our booth, and we’ve already met with abundant potential buyers on the first day. Our objective is still to get our brand known to local buyers, and by looking at the progress in the first two days, we are even expecting to get orders later on.”

Mr Jean Denerolle, General Manager, Dormeuil, France (Premium Wool Zone)
“There has been lots of visitors coming to our booth on the first two days. Joining Intertextile Shanghai is an effective ways for us to develop the Chinese market. We are happy that the organiser referred a VIP buyer to us. Overall, we succeeded in receiving orders and promoting our brands, so I am pleased with the result this year.”
Mr Max Deery, Global Director, Print Stories Ltd, (for Amanda Kelly Ltd), UK (Verve for Design)
“We are satisfied with the results this year. The Verve for Design zone is well organised, and it’s a busier year compared to last. After day one, we’ve already found more than 10 potential buyers, both old and new customers. We’ve participated in other fairs in Europe as well, and I would say Intertextile Shanghai is in line with these shows, and busier than we expected.”

Mr Luca Maderna, New Age srl, Italy (Verve for Design)
“It’s our 10th year exhibiting in Intertextile. Given the large scale, we can always find new contacts here, and it’s also a great opportunity for us to present our new collection to our regular customers.”
Mr Ederhard Ganns, Managing Director, Union Knopf (HK) Ltd, Germany
“Our target clients are mainly brand owners and resellers. I have successfully met with them and have some promising contacts. We have also developed some new connections with both domestic and overseas customers. Intertextile Shanghai is no doubt the world’s number one show.”

Ms Kang Nan Hee, Assistant Manager, R&D Textile Co Ltd, Korea (Korea Pavilion)
“This is our 10th year at Intertextile Shanghai. Every year, we participate in both the spring and autumn fairs and they have never let us down. Not only can we meet numerous new buyers in each edition, we can also keep pace with the ever-changing market trends in the fabric industry. Besides that, in terms of visitor flow, this fair has always been the strongest. Take this year’s fair as an example. In our estimation, we have already received enquiries from almost 300 buyers and agents on the first two days, which has exceeded our expectations. Therefore, we are expecting some 400 orders in total by end of the fair.”

Mr Taku Ito, Manager, Sojitz Vancet (Shanghai) Trading Co Ltd, Japan (Japan Pavilion)
“We exhibit at this show to find new customers and sales channels in China. We’ve been joining the show for a while now, and we continued this edition as we can always meet new customers – I mean, really ‘new’. This year, there were about 400 companies that visited our booth. It’s also interesting that we are getting more online apparel shops visiting us lately.”

Ms Susan Hon, B2B Marketing Communication Director, North Asia, INVISTA Co Ltd, Hong Kong (Functional Lab & Group Pavilion organiser)
“With the help of Intertextile Shanghai – the most well-known platform in the industry – we can promote our newly launched products more efficiently and enhance the influence of our brand. Our booths were packed with visitors over the three days, with many of them high-quality buyers. Intertextile has always been one of the most important trade fairs for us because of its strength in attracting a wide range of buyers, including an unrivalled number of market-leading brands that no other fairs can offer.”

Mr Martin Yang, Marketing Manager, Nilit Nylon Technologies (Suzhou) Co Ltd, Israel (Functional Lab)
“Our management is satisfied with the results as this is where we can boost our business and sales. On the first day, we’ve already met with nearly 20 potential buyers that are very likely to develop into new orders after the fair. The most attractive trait of Intertextile Shanghai is its ability in gathering large numbers of trade buyers. More importantly, the majority of them are quality buyers who aren’t only our target customers but also keen to place orders. This fair is seen by the industry as the major platform to source as it includes more industry leading suppliers, raw material providers, fabric mills and garment manufacturers compared to other similar fairs, and this is why we are here.”

Mr Syed Kamran Shah, Marketing Manager, Soorty Enterprises (Pvt) Ltd, Pakistan (Beyond Denim)
“Our objectives are to establish connections with Chinese brands and manufacturers, as well as to learn buyers’ expectations in this market. We are happy with the visitor numbers, and Intertextile Shanghai is where buyers really come to make purchasing decisions. Buyers came to talk to us and run tests on our fabrics afterwards, and usually within 2-3 months’ time, we will receive orders. We also like the idea of the Beyond Denim hall as it ensures the effectiveness of gathering and getting in touch with our target buyers.”

Mr Štěpán Kučera, Managing Director, Preciosa Components, China (Accessories Vision)
“This has been Preciosa’s third consecutive appearance at the autumn edition of Intertextile Shanghai, where we continue to see an increase in attendance by our target customers, namely high-end fashion brands from both the Chinese and international markets. Among the 200-plus buyers we met on the first two days of the fair were domestic fashion brands, sourcing managers of overseas brands, garment producers, as well as OEMs & ODMs, and we are more than satisfied with the results. Compared to similar fairs in which we have participated, Intertextile has a stronger focus on sourcing and manufacturing. International brands tend to send their sourcing teams, while local manufacturers and vendors also source here.”

Ms Shanshan Lu, Client Manger, Beijing Ecocert Certification Centre Co Ltd, China (All About Sustainability)
“As Intertextile Shanghai is the largest fair of its kind, we can always find our target customers here which are manufacturers from the Greater China area and the Asia Pacific region. The All About Sustainability zone has enhanced the exhibiting effectiveness as it creates a strong theme that attracts the right visitors to our booth. I think the visitor flow is stronger than last year. On day 1 alone, we received enquiries from over 10 potential customers which included old and new accounts. Moreover, by sharing our certifications in the seminar, our brand got further promoted in the fair. All in all, we are very pleased with this year’s outcome and very likely will return again next year.”
Worldwide buyers impressed with the unparalleled range of sourcing options on offer
While the exhibitors highly valued the fair’s ability in attracting quality, genuine buyers from around the world, these buyers were pleased to find all categories of apparel fabrics and accessories products from the entire industry under one roof.

 

Buyer opinions
Mr Johnny Lau, Head of Material Management, Quiksilver Asia Sourcing Ltd, Hong Kong
“The strongest trait of Intertextile Shanghai is its scale and aptitude in gathering the entire industry in one place. I believe no matter which sector of the industry or market you belong to – suiting, casual wear or ladieswear; high-end or fast fashion – you are ensured to find the right suppliers here. The fair houses a full-spectrum of suppliers which ease the sourcing process for purchasing departments like us. To maintain brand competitiveness, it is getting more important for us nowadays to know about suppliers and manufacturers from around the world, so we were also impressed with the fair’s internationalism and had unexpected returns from this trip.”

Mr Luis Alfonso Yepes Londono, Manager, Yetex SAS, Columbia
“Among all trade shows, Intertextile Shanghai is the most influential one for my business, even compared to the European shows. Not only can I find local suppliers, but the fair literally puts brands from around the globe under one roof. This morning I discussed with three local companies that match my interest. Their fabrics were of good quality and competitive pricing, so I will soon make a decision and place orders.”

Ms Zhou Jie, General Manager, Shenzhen New Look Fashion Co Ltd, China
“Intertextile Shanghai is a comprehensive trade fair, and what’s unique about this fair is its unparalleled ability in gathering both domestic and premium international apparel fabrics and accessories suppliers. Therefore, the sourcing options in this fair cater to all market demands. I can say Intertextile is a fair that all fashion brands can’t miss as one can definitely find all kids of materials here. We sent over 10 colleagues from the sourcing and design departments to this year’s fair and sourced around 80% of the fabrics we need for the next season’s collection from about eight exhibitors.”

 

The next Intertextile Shanghai Apparel Fabrics is the Spring Edition, held from 14 – 16 March 2018.
Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

 

Imprima Imprima
Imprima
12.06.2017

IMPRIMA & THE AMSTERDAM INNOVATION FORUM: “How apparel brands can transform supply chains” 14th June, 2017

The session will explore what the digital revolution means for business, and how innovations in manufacturing are the new reality that help create sustainable products that last and can be scaled to suit each actor through smart customization.
IMPRIMA S.p.a. is the global holding company dedicated to research, development and innovation in the textile printing and finishing arena. It is the first Fully Digital Industrial Platform, that today can offer a fully digitalized process in every step of its manufacture. Thanks to the acquisition of 100% of the German finishing and textile printing company KBC and 100% the Italian company GUARISCO by WISE SGR, Imprima is enriched by an international outlook that makes it extremely competitive in the market, which will be reinforced in the coming months with additional acquisitions in Italy and abroad, taking care to maintain best practices in terms of quality and service and the business identity of each company. In this way, Imprima represents a preferred partner for the fashion retailers.

The session will explore what the digital revolution means for business, and how innovations in manufacturing are the new reality that help create sustainable products that last and can be scaled to suit each actor through smart customization.
IMPRIMA S.p.a. is the global holding company dedicated to research, development and innovation in the textile printing and finishing arena. It is the first Fully Digital Industrial Platform, that today can offer a fully digitalized process in every step of its manufacture. Thanks to the acquisition of 100% of the German finishing and textile printing company KBC and 100% the Italian company GUARISCO by WISE SGR, Imprima is enriched by an international outlook that makes it extremely competitive in the market, which will be reinforced in the coming months with additional acquisitions in Italy and abroad, taking care to maintain best practices in terms of quality and service and the business identity of each company. In this way, Imprima represents a preferred partner for the fashion retailers.
IMPRIMA boasts a Total Water Management guarantee through its own chemical/physical process of water depuration technologies able to reduce the consumption of water up to 90%, avoiding effluents, by circulating it in a virtuous recycling process, for example now needing only 1 liter of water compared to traditionally 12 liters needed in the past.

More information:
Imprima, digital
Source:

GB Network Marketing & Communication

JEC Group Source: www.agenceapocope.com
JEC Group
30.05.2017

Innovations that will change the future of Building and Construction to be rewarded at JEC Innovation Awards in Chicago, June 20-22, 2017

Composites use in Building and Construction will be highlighted at JEC newest event dedicated to this specific Composites Industry next month in Chicago, IL, USA. The numerous and diverse benefits that these innovative materials bring to the Building Industry will help overcome the coming challenges such as, urbanization, increase of natural disasters (floods, storms, tsunamis, earthquakes…), along with the decrease of non-renewable raw materials and the high standard levels set by the society in terms of lightness and fluidity. Composites Materials bring answers and opportunities to tackle those issues in sustainable, durable and reliable manners. Solutions like ease of fabrication (Owens Corning), structures durability (Biteam), anti-seismic reinforcement (DowAksa), use of end-of-life products such as recycled bottles of water (Premier Composites Technologies), aerial forms (Optima Projects Ltd) or again energy saving (Armageddon Energy).

Composites use in Building and Construction will be highlighted at JEC newest event dedicated to this specific Composites Industry next month in Chicago, IL, USA. The numerous and diverse benefits that these innovative materials bring to the Building Industry will help overcome the coming challenges such as, urbanization, increase of natural disasters (floods, storms, tsunamis, earthquakes…), along with the decrease of non-renewable raw materials and the high standard levels set by the society in terms of lightness and fluidity. Composites Materials bring answers and opportunities to tackle those issues in sustainable, durable and reliable manners. Solutions like ease of fabrication (Owens Corning), structures durability (Biteam), anti-seismic reinforcement (DowAksa), use of end-of-life products such as recycled bottles of water (Premier Composites Technologies), aerial forms (Optima Projects Ltd) or again energy saving (Armageddon Energy).


Following its strategy to address every Composites End-user, the JEC Innovation Awards will reward these 6 Composites Innovators in Building & Construction that will change the way we build.
If the majority of submissions relied on glass fibers, which is common in the Construction field, we see an increased interest in carbon fibers, especially for structural applications. And similarly to all sectors of the composite industry, thermoplastics are gaining in importance in Construction. Therefore, to promote the growing use of composites as a construction material, 6 categories are awarded, covering a large panel of applications and possibilities.

Source:

AGENCE APOCOPE

Hexcel AGENCE APOCOPE
Hexcel
09.05.2017

Hexcel at SAMPE CHINA 2017

 SAMPE China 2017 takes place in Beijing on May 10-12, 2017 and Hexcel is exhibiting at the event as a leader in advanced composite technologies. At booth #A60 Hexcel’s displays will demonstrate the wide range of composite materials supplied by Hexcel to customers in China.
Display parts will include the A350 XWB rudder skin and belly fairing panel made by Hexcel customer HMC (Harbin Hafei Airbus Composite Manufacturing Center), a joint venture established by Hafei and Airbus in 2009. Since then Hexcel has been a strategic supplier to HMC of composite materials for packages including the Airbus A320 elevator, HTP spar and rudder, and the A350 XWB belly fairing, rudder, elevator and section 19 maintenance door.

 SAMPE China 2017 takes place in Beijing on May 10-12, 2017 and Hexcel is exhibiting at the event as a leader in advanced composite technologies. At booth #A60 Hexcel’s displays will demonstrate the wide range of composite materials supplied by Hexcel to customers in China.
Display parts will include the A350 XWB rudder skin and belly fairing panel made by Hexcel customer HMC (Harbin Hafei Airbus Composite Manufacturing Center), a joint venture established by Hafei and Airbus in 2009. Since then Hexcel has been a strategic supplier to HMC of composite materials for packages including the Airbus A320 elevator, HTP spar and rudder, and the A350 XWB belly fairing, rudder, elevator and section 19 maintenance door.


Other booth displays include HexTow® carbon fiber, a helicopter canopy made from HexPly® prepreg, and a structural sandwich made from HexWeb® honeycomb and HexPly® prepreg.
Hexcel will also display a section of a composite beam manufactured by hot forming Hexcel’s HexPly® M21 UD carbon fiber prepreg. Other promotions include HexFlow® RTM6-2 resin system a 2-component version of HexFlow® RTM6 for resin transfer molding. A number of OEMs have qualified this infusion system designed for aerospace primary structures, which has a high Tg and provides excellent hot/wet performance from a flexible cure cycle. RTM6-2 also has a long shelf life and has no transportation restrictions.

More information:
Sampe China Hexcel China
Source:

AGENCE APOCOPE