From the Sector

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

• Innovation begins with creativity
• A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

ITM 2022, which will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022, will be the first and largest international textile machinery exhibition to be held after a 3-year break. The leading brands of world textile technologies will launch their latest machines at ITM 2022.
The latest ITM Exhibition hosted the world textile industry with 1200 exhibitors from 64 countries and 60,000 visitors from 94 countries. ITM 2022 Exhibition in cooperation with TEMSAD and in partnership with Tüyap Tüm Fuarcılık Inc. and Teknik Exhibitions Inc. plans to set new records as one of the most important global organizations to be organized after the pandemic outbreak period.

The textile industry, which is among the leading sectors in Turkey's exports, demonstrated its power to the whole world, especially during the pandemic outbreak period. Achieving an increase of up to 40 percent in exports of textiles and raw materials, Turkey also broke records after records in medical textile, technical textile, and indoor textile exports.

Ranking in the top three in the most important market for the European textile machinery manufacturers, Turkey also attracted attention with its production performance during the troublesome pandemic outbreak. Many European machinery manufacturers, who spoke highly of Turkey's performance, announced that their machinery sales to Turkey increased in 2020 and 2021. Turkish textile companies, which increase their production capacity because they were unable to keep up with the demands, continue their new investments and modernizations.

Leading brands of textile technologies such as Picanol, Itema, Toyota, Saurer, Rieter and Trützschler are among the companies that will exhibit their latest innovations at the ITM 2022.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

• Neueste Produktreihe von Mimaki sorgt für Effizienz- und Qualitätssteigerung in der Werbetechnik und im Textildruck
• Mimaki bringt neue Druckerserie 330 und Schneideplotter-Serie CG-AR im Einstiegssegment auf den Markt

Mimaki Europe gab heute die Markteinführung der brandneuen Inkjetdrucker-Serie 330 für das Großformat mit JV330-160, CJV330-160 und TS330-1600 sowie der neuen Schneideplotter-Serie CG-AR bekannt. Auf Basis einer plattformübergreifenden Strategie bieten die bei der Veranstaltung Global Innovation Days erstmals vorgestellten Modelle der 330-Serie eine qualitativ hochwertige, doch gleichzeitig auch kostengünstige Lösung für mehrere Bereiche. Ebenso bieten die Schneideplotter der CG-AR-Serie im Einstiegssegment neue Funktionen zur Workflow-Optimierung und sind in drei Größen erhältlich. Beide Markteinführungen stehen im Einklang mit dem strategischen Ziel von Mimaki, Kunden bei der Erweiterung und Verbesserung ihrer Druckdienstleistungen und ihres Produktangebots zu unterstützen.
 
330 Serie: Markteinführung der neuesten Drucker von Mimaki
 
Folgend auf die erfolgreichen Serien 100 und 300 Plus zeichnen sich die für das mittlere und höhere Segment entwickelten Modelle der 330-Serie durch hohe Bildqualität und Produktivität aus. Mit ihrem großen Farbraum und beständigen Druckbild sowie ihrer hohen Auflösung sind die neuesten Drucker von Mimaki für den Einsatz in der Werbetechnik und im Textildruck perfekt geeignet.
 
Die Eco-Solvent-Inkjetdrucker JV330-160 und CJV330-160 bieten die für Werbetechnik im Innen- und Außenbereich erforderliche hohe Bildqualität durch das neue Eingabeprofil „Deep Color Natural“ mit brillanten Volltonfarben, natürlichen Hauttönen sowie tiefen Rot- und neutralen Grautönen. Mit einem Durchsatz von 21,0 m2/h im Standard-Vierfarbdruck eignet sich dieser Drucker hervorragend für eilige Druckaufträge. Die integrierten Reinigungsmechanismen und Überwachungsfunktionen sorgen für einen effizienten Workflow und eine längere Betriebsdauer.
 
Beide Modelle verfügen über ein neu entwickeltes Aufwicklungssystem für das gleichzeitige Laden von drei Materialrollen, wodurch der Zeit- und Arbeitsaufwand für den Materialwechsel erheblich verringert wird. Durch einfaches Drehen der Wechselvorrichtung kann ein Bediener das gewünschte Material problemlos positionieren. Eine andere neue Standardfunktion ist ein „XY Slitter“ zum Längs- und Querschneiden. Auf diese Weise erübrigen sich das Abwickeln und Schneiden, wodurch Druckdienstleister die Weiterverarbeitung mit weniger manuellen Eingriffen beschleunigen können.
 
Das reine Druckermodell JV330-160 sowie der Drucker mit integrierter Schneidefunktion CJV330-160 werden im April 2022 weltweit erhältlich sein.
 
Abgesehen von der neuen Lösung für die Werbetechnik hat Mimaki auch den TS330-1600 auf den Markt gebracht, einen Inkjet-Sublimationsdrucker für die Textilindustrie. Der für hohe Produktivität und Bildqualität ausgelegte und mit neuen Funktionen für stabilen Druckbetrieb ausgestattete TS330-1600 hat einen Durchsatz von bis zu 69 m2/h im Draft- bzw. Entwurfsmodus mit 4 Farben bzw. von bis zu 135 m2/h im schnellsten Modus. Mit dem neu entwickelten Reinigungsmechanismus werden unerwünschte Tintenrückstände von der Düsenoberfläche mit einem textilen Wiper entfernt. Dadurch werden Tintenspritzer reduziert und die generelle Wartung der Maschine verbessert.
 
Zudem hat der TS330-1600 optionale Erweiterungen zur weiteren Effizienzsteigerung, wie die Zufuhreinheit mit 10 kg-Tintenbehältern, die die Tintenkosten im Vergleich zum 2 Liter-Tintenpack verringert und einen längeren, kontinuierlichen Druckbetrieb ermöglicht. Zum Laden vom Thermotransferpapier und zur weiteren Verringerung der Betriebskosten kann auch eine Mini-Jumbo-Rolleneinheit ergänzt werden.
 
Ein verbessertes Aufwicklungssystem mit zwei Motoren auf beiden Seiten des Druckers sorgt für gleichmäßige Lastverteilung und stabiles Aufwickeln des bedruckten Papiers selbst bei großen Stückzahlen. TxLink4, die RIP-Software von Mimaki für den Textildruckmarkt, gehört zum Lieferumfang jedes TS330-1600.

Effizienzsteigerung mit den Schneideplottern CG-AR im Einstiegssegment
 
Neben den Druckern der 330-Serie bietet Mimaki jetzt auch die neuen Schneideplotter der CG-AR-Serie, die in drei verschiedenen Größen (CG-60AR, CG-100AR und CG-130AR) erhältlich sind. Diese Plotter bieten weitaus bessere Funktionen als heute erhältliche Konkurrenzmodelle für das Einstiegssegment. Aufgrund der starken Kundennachfrage nach kürzeren Lieferzeiten haben diese Schneideplotter eine höhere Geschwindigkeit und Präzision und zeichnen sich durch hohe Bedienerfreundlichkeit aus. Außerdem unterstützen sie eine große Vielzahl von Materialien, wie PVC-, transparente und reflektierende Folien.

• Patterning from the cloud
• SwapKnit – KARL MAYER's first Smart Machine function revolutionizes the way of guide bar control

A view of machine data from anywhere and at any time, service support as if on site but from far away, patterning from the cloud: digitalization offers completely new possibilities in warp knitting, which KARL MAYER is using to offer its customers a wide range of advantages for their business. In doing so, the world market leader is pursuing a well thought-out strategy: coordinated innovation activities are being used above all to rethink aftersales support and machine maintenance, and to develop coordinated offers in three areas. These are Care Solutions, Digital Solutions and Smart Machine.

Smart Machine comprises special functions that are backed by KARL MAYER's expertise and enable customers to maximize their productivity. In addition, a previously unattainable reproducibility of quality is possible.

A first solution for this is SwapKnit. The new patterning concept manages completely without pattern discs, but still enables the high operating speeds typical of mechanical guide bar drives. The basis for this is the networking of the machine via the k.ey device with the KM.ON cloud.

• Speed of operation and pattern change
• Lapping procurement per individual purchase or flat rate
• Best article reproducibility

Further steps to follow
As the first Smart Machine offering, SwapKnit marks the start of digital innovations with which KARL MAYER offers its customers more benefits from its machines. Further innovations will follow.
"In our development activities, in addition to the important topics such as more speed and flexibility, we also have simplified handling and the possibilities of automation in mind. We want maximum efficiency with minimum operating effort," says Kay Hilbert.

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd is known worldwide for its advanced, high-performance digital cutting systems «made in Switzerland». For some time now, the Swiss manufacturer has also been making a name for itself with user-friendly automation software such as PrimeCenter for prepress, as well as the Visualizing Option and the Pick&Place Interface Option for digital production. The latter are two highly effective solutions for removing/unloading cut parts, offering visual support and robot integration, respectively. On account of its exceptional know-how and consulting expertise,

• PrimeCenter automation software serves as control center for creating print & cut files and enables a highly efficient and productive prepress workflow. In a few clicks, users create fully nested print & cut jobs.
   
• The Pick&Place Interface Option lets Zünd Cut Center – ZCC control a robotic device, enabling fully automated parts removal—picking, sorting, and placing at pre-defined locations.
   
•  The Visualizing Option provides visual support for parts removal. Cut parts are labeled via projection or monitor. The user is able to see at a glance which parts belong to which job and can apply labels for continuous Track&Trace.

For more than ten years, EDP has been evaluating products and developments in the graphics industry for excellence and for commendation through an evaluation process involving the EDP technical committee, a jury of experts, and finally, a general award assembly of EDP members.

Digitalization is a big story in the world of business. It’s all about change, making use of technology to transform attitudes and create new opportunities to grow revenue. At its heart is innovation, with new systems and intelligent use of data. In textiles, the entire value chain is going digital, as evidenced by the commitment of Swiss Textile Machinery Association member firms. Their story – presented here in six ‘chapters’ – spans industry sectors through spinning, weaving, finishing and nonwovens.

Cost savings and more
The process of digitalization in the textile industry today is continuous – faster in some segments than others – but noticeable everywhere. Automation is promising in many areas of finishing and making-up, where initial investments are being made. An example is folding of finished goods, previously a slow manual operation. Now, high-performance automatic folding machines from Swiss company Espritech deliver the potential for cost savings, unlocking new options for positive change at this most labor-intensive stage of production. For manufacturers in low-cost areas, the benefit results from its volume and is a simple financial one. In higher-cost segments, the application of this technology can be part of a completely new business model, taking production closer to the end customer.

Better process, better workplace
Pioneering in the field of digitalization embraces social responsibility along with the introduction of bold new technological innovation. That’s a commitment made by Uster, as it aims to shape future working practices in the textile industry in areas where its systems are applied. In fabric inspection, that means combining the strengths of human capabilities with the performance of Artificial Intelligence. Automatic defect classification with machine learning technology is the next leap in digitalization for fabric manufacturers, following on from automated detection of fabric faults, which is already well established in weaving and finishing mills. This will bring benefits in profitability for the manufacturer – as well as an improved working environment for their operatives, freed from repetitive tasks.

Information, flexible and fast
Access to data is critical in the digitalized world of textiles. It must be flexible, fast and secure, and available to all levels of the company – worldwide. Jakob Muller serves the narrow fabrics industry ideally with a digitalization portal, perfectly developed to provide essential production information. The portal is a browser-based production data acquisition system, with direct access to the machine controls. The system offers unique data monitoring and communication on a global framework. Digitized weave rooms present information 24/7 on desktops at the customer’s plant, as well as on tablets and smartphones remotely.

Making the most of it
Rieter takes advantage of latest digital technology to offer customers a unique experience. Their digital spinning suite helps spinners overcome their daily challenges and manage costs and efficiency more effectively. This all-in-one mill management system connects all the machinery, giving quick access to the right information and a holistic view, from bale to yarn. Users profit from full transparency, and are presented with recommendations based on long-standing experience and know-how. This is digitalization at its most practical, applied to allow spinners to make the most of their installed machinery.

Production, service, training – digital everything
As a solutions provider, Saurer puts digitalization at the core of business, integral to its technology offering to customers. Some latest examples include self-optimization of spinning machines, and a fully automated transport of cylindrical or conical cross-wound packages. These are automatically stored in an internal buffer system, for later feeding to subsequent processes. Of course after-sales service is also digital: the e-shop and machine information hub, together with the web-based training centre, ensure that knowledge is transferred to customers – turning employees into experts.

See the future system today
Autefa Solutions uses the concept of digital twinning, visualizing any real-world concept of a nonwovens line to make it easier for potential customers to grasp the idea. It’s also a big help for training and servicing needs. Most of all they digitalize important parts e.g. of a baling press line with perfectly interconnecting software tools. This is an excellent method for reducing commissioning times. Ordered bale presses reach technical readiness in the form of a digital twin, before they are commissioned in the real world. This typically halves the total time to get the line up and running.
Speaking on behalf of Swiss Textile Machinery Association members, André Imhof, CEO of Autefa Solutions Switzerland AG, says: “Making digitalization our friend opens doors for business model innovations, which is essential for our industry competitiveness. The approach is to digitalize everything that can be digitalized. We won’t stop.”