From the Sector

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

1. Intense Needling
   Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
   Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
2. “Fibre Pulp Recycling”
   Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
   When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
3. Additive nonwoven production
   The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
4. “IsoFeed”-card feeding
   In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

In the Spotlight
Standout technology on show includes the new 330 series, consisting of the JV330-160, the CJV330-160 and the TS330-1600. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. The eco-solvent inkjet printers, the JV330-160 and CJV330-160, boast innovative features such as the new media changer that allows three rolls of media to be loaded simultaneously, and the XY slitter, which provides in-line X-axis and Y-axis sheet-fed cutting. The TS330-1600, which will make its international tradeshow debut at FESPA, is a sublimation printer with an improved take-up system and optional add-ons to further increase efficiency, including a 10kg ink tank supply unit and a mini jumbo roll unit.

Additionally, FESPA visitors will see Mimaki’s all new CG-AR cutting plotter.

Urbanising FESPA 2022
In line with FESPA 2022’s tagline, ‘Experience print in motion’, Mimaki’s stand will bring a vibrancy to the show, by demonstrating real-world applications alongside the machines that created them. This year will see Mimaki’s stand convey the streets of Berlin in its design, and urban inspired works by designers, including Nicky Nahafahik and Xavier Protano, all printed using various Mimaki’s printing technologies and displayed on the stand - allowing visitors experience Berlin from inside the Messe Berlin halls. Mimaki will also join forces with Dutch designer Tessa Koops to create a selection of unique fashion items, after their successful collaborations in 2019.

Celebrating Customer Success
As a centrepiece of Mimaki’s stand, the customer gallery will return to FESPA 2022, showcasing and celebrating customer samples and testimonials. There will also be live demonstrations of Mimaki’s latest technologies in dedicated sign, UV and textile application areas. The latest UV printers on display include the UJV100, and the JFX and UJF series. The acclaimed 3D printer, the 3DUJ-2207, will also return to FESPA this year to showcase the many high-quality, full-colour models, including figurines, scale models and prototypes, achievable with this cost-efficient, entry-level printer.

To answer questions about the applications and Mimaki technologies, hospitality and meeting areas will provide space for one-to-one conversations with Mimaki experts.

• Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
• Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:
·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

The first Carded/Pulp line at Ecowipes is a constant success due to surging end product demand from international markets. To spur the company’s growth Trützschler Nonwovens and Voith will supply the second CP Line to the Polish producer.

The carded/pulp technology by Trützschler and Voith delivers both performance and top-quality products. Voith’s BlueLine stock preparation equipment and cylinder mould FloatLip former processes paper-grade pulp, the cost-effective raw material for the paper industry. It delivers an extremely homogeneous wet-laid web. The NCT high-speed card, supplied by Trützschler Nonwovens, lays a light-weight layer of viscose or lyocell fibers on top of it. This configuration allows for a precise layering and an efficient dewatering. Trützschler’s AquaJet entangles both layers into an inseparable composite nonwoven with superior functionality. A multi-drum dryer and a powerful winder complete the production line which allows for productions speeds up to 300 m/min.

Ecowipes recipe for success is a market high pulp content in the wipe material thus bringing down production costs significantly. For optimising its production processes, Ecowipes relies on digital solutions delivered especially for the old and the new Trützschler/Voith line.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.

Reifenhäuser Cast Sheet Coating - specialists for cast film, sheet extrusion and extrusion coating lines - will showcase a new production process for cost-effective film/nonwoven composites with an exceptionally low grammage at ICE (International Converting Exhibition) Europe. The leading international trade show for paper, film, and foil conversion and processing will be held at Messe München (Munich trade fair center) from March 15-17, 2022.

The Covid-19 pandemic and current supply shortages have exposed the dependence of companies on global supply chains. This situation is both a warning signal and an opportunity to boost and reorganize the local production of semi-finished products from the ground up. Reifenhäuser Cast Sheet Coating has now developed a trend-setting production process termed Ultrathin Coating, in particular for the sector of medical protective clothing. The process will permit customers to produce particularly lightweight film/nonwoven composites with greater cost efficiency and, as a result, more competitively. The patent-pending process has several advantages: It cuts film grammage by 66%; material consumption in the overall composite is reduced by 28%; and it slashes costs by up to 34% compared to conventional semi-finished products. Significant cost savings are achieved in various ways, for example, by replacing hotmelt adhesives, which reduces line maintenance to a great extent at the same time.

Mark Borutta, Sales & Marketing Specialist bei Reifenhäuser Cast Sheet Coating, erklärt: „Wir erleben derzeit einen nachhaltig wachsenden Mehrbedarf für medizinische Schutzbekleidung verbunden mit einer Rückholstrategie für lokale Produktionskapazitäten. Vor diesem Hintergrund erzielen Produzenten mit ‚Ultrathin Coating‘ einen schnellen Return on Invest und hohe Profitabilität – auch bei einer Produktion innerhalb Europas.“ Die Vlies-erfahrene Schwesterfirma Reifenhäuser Reicofil –führender Hersteller von Vliesstoffanlagen – hat die Entwicklung unterstützt.

Mark Borutta, Sales & Marketing specialist at Reifenhäuser Cast Sheet Coating, explains: "We are currently experiencing a sustained increase in demand for medical protective clothing combined with a return strategy for local production capacity. Against this backdrop, producers achieve a fast return on investment and high profitability with Ultrathin Coating - even when production is based in Europe." The sister company, Reifenhäuser Reicofil, an experienced and global leading manufacturer of nonwoven lines, provided their support to the development.

Even if manufacturers already produce medical protective clothing and prefer to handle the coating process internally in the future instead of importing the necessary composites, it is worthwhile to set up an in-house production facility. In either case, the investment in Ultrathin Coating usually pays for itself in less than 12 months. The lower material input also reduces the consumption of fossil raw materials and this in turn responds to the increased demand for more sustainable products.

• Mimaki’s Newest Product Series to Transform the Sign Graphics and Textile Markets with Improved Efficiency and Quality 
• Mimaki to launch the 330 Printer Series and the new entry-level cutting plotter series, the CG-AR

Mimaki Europe today announces a brand-new large format inkjet printer series, the 330 Series, including the JV330-160, CJV330-160 and TS330-1600, as well as a new range of CG-AR cutting plotters. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. Similarly, the CG-AR Series offers users new workflow enhancing, entry-level cutting plotter technologies available in three sizes. Both launches align with Mimaki’s objective to grow both its high-end and entry-level product range, to further encourage and support customers expanding and improving upon their printing services and product offering.

Introducing Mimaki’s latest printers – the 330 Series

Following on from the success of the 100 and 300 Plus Series, the 330 Series was developed to offer mid- to high-end printing models, focusing on high image quality and productivity. As a company renowned for its high-colour range, Mimaki’s newest printers can achieve high resolution, durable prints for both the Sign Graphic and Textile industries. 

The eco-solvent inkjet printers, the JV330-160 and CJV330-160, deliver the high-standard of colour required for indoor and outdoor sign graphics through the new “Deep Color Natural” input profile, offering eye-catching and vivid solid colours, natural skin tones as well as deep reds and neutral greys. With printing speeds of 21.0m2/h during standard mode while using 4 colours, this printer is ideal for print jobs that require quick delivery. The in-built cleaning mechanisms and monitoring features ensure an efficient workflow and allow for longer running times.

Both models feature a newly designed unwinding system that allows three rolls of media to be loaded simultaneously, greatly reducing the time and manpower required to change print media. One operator can bring the desired media into position simply by turning the media changer. Another standard feature is an “XY slitter” - a highly precise cutting technology, which provides in-line X-axis and Y-axis sheet-fed cutting. This eliminates the unwinding and rough cutting from the workflow, helping printers to significantly speed up and streamline the post-process, with less interference needed.

The print-only model JV330-160 as well as the integrated printer and cutter CJV330-160 will be available globally in April 2022.

In addition to the Sign Graphics solutions, Mimaki has also released the TS330-1600, a sublimation transfer inkjet printer, for the textile industry. Enabling both high production and high image quality, and equipped with new functions to improve stable operation, the TS330-1600 can achieve a printing speed of 69m2/h in Draft mode with a 4-colour ink set, with the fastest mode reaching up to 135m2/h. The newest cleaning mechanism applies a cloth wiper that removes unwanted ink from the nozzle surface, reducing ink splatter and improving the overall upkeep of the machine.

Increasing efficiency with entry-level CG-AR plotting cutter series

Alongside the 330 Series, Mimaki has also launched the CG-AR Series plotting cutters. Available in three different sizes (CG-60AR, CG-100AR and CG-130AR), these plotters go above and beyond current entry-level options available today. Recognising customer demand of shorter delivery times, these cutters provide increased speed and accuracy, all with user-friendly operability. In addition, the cutters have the ability to handle a diverse range of materials, such as PVC, fluorescent and reflective sheets.

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd is known worldwide for its advanced, high-performance digital cutting systems «made in Switzerland». For some time now, the Swiss manufacturer has also been making a name for itself with user-friendly automation software such as PrimeCenter for prepress, as well as the Visualizing Option and the Pick&Place Interface Option for digital production. The latter are two highly effective solutions for removing/unloading cut parts, offering visual support and robot integration, respectively. On account of its exceptional know-how and consulting expertise,

• PrimeCenter automation software serves as control center for creating print & cut files and enables a highly efficient and productive prepress workflow. In a few clicks, users create fully nested print & cut jobs.
   
• The Pick&Place Interface Option lets Zünd Cut Center – ZCC control a robotic device, enabling fully automated parts removal—picking, sorting, and placing at pre-defined locations.
   
•  The Visualizing Option provides visual support for parts removal. Cut parts are labeled via projection or monitor. The user is able to see at a glance which parts belong to which job and can apply labels for continuous Track&Trace.

For more than ten years, EDP has been evaluating products and developments in the graphics industry for excellence and for commendation through an evaluation process involving the EDP technical committee, a jury of experts, and finally, a general award assembly of EDP members.

Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have expanded their collaboration. As a result of a new distribution agreement, customers will be able to benefit from state-of-the-art digital production solutions for automated processing of composite materials. Zünd and Airborne will jointly promote these production solutions through their sales and servicing networks.

Both companies are technology leaders offering solutions for composites manufacturing and processing – Zünd develops and manufactures digital flatbed cutting systems capable of processing reinforced fiber materials such as CFRP or GRP. Airborne, based in Den Haag in the Netherlands, provides fully integrated automation solutions for efficient composites processing.
 
The goal of this partnership is to make it easier than ever for customers to access state-of-the-art digital cutting and automation solutions. In that endeavor, the competencies of both companies complement each other perfectly. Their combined expertise manifests itself especially in the areas of fully automated cutting, preforming, offloading and sorting.

Airborne’s automated kitting solutions reduce operating costs by maximizing material yield through optimized nesting. At the same time, they resolve the challenges inherent in sorting and grouping cut parts from complex nested layouts into laminate-ready kits with minimal operator intervention. Airborne offer a portfolio of solutions tailored to meet the individual needs of customers from affordable entry-level semi-automated products through to fully integrated and high productivity systems. All systems are "plug and play" and require no additional special programming. Airborne’s software generates the required robotics code directly from information derived from the nesting data and permits static or dynamic nesting and a sorting solution that adapts “on the fly”.

Zünd has been designing, manufacturing, and marketing digital cutting systems for more than 30 years. Zünd high-performance modular cutters are now in use all over the world. The Swiss family-owned company now in its second generation has established a global network of Zünd sales and service organizations under the leadership of Oliver Zünd. “This is a situation where two strong partners complement each other in much the same way as in strong partnerships we have established in other industries. It is a continuation of a long-standing company strategy. Airborne has excellent know-how in developing and manufacturing automated solutions for processing composites. Together we can offer our customers state-of-the-art technology and provide a technological answer to the growing demand for high-performance, innovative production systems in the composites market."

Joe Summers, Commercial Director for Airborne agrees: "Our partnership with Zünd brings a great deal of added value to our customers. Zünd shares our goal of creating greater cutting-room productivity. The Zünd cutter is key to converting materials with the greatest possible efficiency and maximum material usage."