From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
173 results
(c) TMAS
30.12.2022

Climate impact mapping of Swedish textile machinery

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

  • Facility Management (heating, electricity, water, cooling agents and waste disposal).
  • Employee Mobility (commuting and company cars).
  • Business Travel (flights travel by train, rental cars).
  • Procurement (production, packaging and office materials).
  • Logistics (inbound and outbound).

Primary data is being used wherever possible and emission factors originate from internationally recognised databases such as ecoinvent and GEMIS.

The ClimatePartner measurement programme is based on the guidelines of the Greenhouse Gas Protocol Corporate Accounting and Reporting Standard (GHG Protocol), and factors in all greenhouse gases covered by the Kyoto Protocol. These are carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFC), perfluorocarbons (PFC), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3).

Each of these gases affect the atmosphere differently and remain in the atmosphere for different lengths of time. Rather than reporting on each gas separately, they are expressed as a CO2 equivalent (CO2e) for the sake of simplicity. A CO2e is essentially a conversion into a ‘global warming potential’ value that enables the influence of different gases on global warming to be compared.

More information:
Swedish Textile Machinery Association TMAS ClimatePartner corporate carbon footprint Carbon Footprint
Source:

TMAS / AWOL Media

print close
more
(c) Dent Instrumentation
30.12.2022

BTMA: Sensor specialist becomes employee owned

BTMA member Dent Instrumentation – a specialist in contactless yarn sensors – has become an employee-owned business following the formation of a new Employee Ownership Trust (EOT).

The company, based in Colne, Lancashire, has been family owned since its founder Geoffrey Dent secured a patent for the very first contactless yarn sensor in the 1960s. It has been successfully run by his son Andrew and the family for many years.
“This deal ensures a smooth succession as well as the preservation of the company’s core family values and the Dent Instrumentation name,” said Managing Director Colin Hull. “The EOT structure will maintain the integrity of the business for years to come.”

The liability of Dent sensors makes them integral to the yarn spinning and winding processes and they have become a standard throughout the textile industry, recognised for their quality, performance and value. They are used by major manufacturers of textiles and textile machinery under either Dent or OEM machine builder brands.

BTMA member Dent Instrumentation – a specialist in contactless yarn sensors – has become an employee-owned business following the formation of a new Employee Ownership Trust (EOT).

The company, based in Colne, Lancashire, has been family owned since its founder Geoffrey Dent secured a patent for the very first contactless yarn sensor in the 1960s. It has been successfully run by his son Andrew and the family for many years.
“This deal ensures a smooth succession as well as the preservation of the company’s core family values and the Dent Instrumentation name,” said Managing Director Colin Hull. “The EOT structure will maintain the integrity of the business for years to come.”

The liability of Dent sensors makes them integral to the yarn spinning and winding processes and they have become a standard throughout the textile industry, recognised for their quality, performance and value. They are used by major manufacturers of textiles and textile machinery under either Dent or OEM machine builder brands.

More information:
BTMA British Textile Machinery Association Dent Instrumentation yarn sensors
Source:

BTMA / AWOL

print close
more
(c) ITM Exhibition
30.12.2022

ITM Exhibition to be held in Uzbekistan

ITM - International Textile Machinery Exhibition, which is one of the world's most important exhibitions in its field and carries its success beyond its borders, will be held in a country other than Turkey for the first time next year under the name 'ITM Uzbekistan'. 'ITM Uzbekistan 2023 Exhibition', which will be held in Uzbekistan New Expo Center on September 12-15, 2023, will bring together buyers from Central Asia and Turkic Republics with the world's most important textile and garment technology manufacturers.

ITM Uzbekistan to be organized in odd years
'ITM Uzbekistan', organised by Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., will be first held in September 2023, from 12th to 15th, and thenorganized in the following odd years such as 2025, 2027, and so on. The exhibition calendar was created by taking into account the dates of the exhibitions organized in the same sector in different countries of the world and in Europe and the benefits of the sector.

ITM - International Textile Machinery Exhibition, which is one of the world's most important exhibitions in its field and carries its success beyond its borders, will be held in a country other than Turkey for the first time next year under the name 'ITM Uzbekistan'. 'ITM Uzbekistan 2023 Exhibition', which will be held in Uzbekistan New Expo Center on September 12-15, 2023, will bring together buyers from Central Asia and Turkic Republics with the world's most important textile and garment technology manufacturers.

ITM Uzbekistan to be organized in odd years
'ITM Uzbekistan', organised by Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., will be first held in September 2023, from 12th to 15th, and thenorganized in the following odd years such as 2025, 2027, and so on. The exhibition calendar was created by taking into account the dates of the exhibitions organized in the same sector in different countries of the world and in Europe and the benefits of the sector.

Tashkent New Expo Center
New Expo Center, built in Tashkent, the capital of Uzbekistan, will host the most important events of both Central Asia and Turkic Republics. New Expo Center, where many national and international events will be held, will be the gateway of Central Asia to the world. The exhibition center, consisting of a total area of 44 thousand square meters and two stages, was built with the latest technology, taking into account all needs. The new exhibition center, which includes cafes/restaurants, resting areas, meeting, congress, seminar and exhibition halls, is an important attraction center with its proximity to the new airport under construction in the capital and the facilities where the international Olympic Games will be held.

More information:
ITM International Textile Machinery Exhibition textile machinery
Source:

ITM Exhibition

print close
more
(c) FET
Business Secretary Grant Shapps discusses FET’s wet spinning system with Mark Smith, FET R&D Manager
16.12.2022

FET extrusion system features in UK Business Secretary’s visit

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.

More information:
FET Fibre Extrusion Technology spinning technologies meltspinning
Source:

FET Ltd.

print close
more
12.12.2022

ANDRITZ recycling line for agricultural plastic waste nets

RecyOuest, France, has successfully started up the world's first recycling line for agricultural plastic waste nets at its mill in Argentan. The innovative recycling line featuring a unique dry-cleaning system was delivered, installed and commissioned by the international technology group ANDRITZ in August 2022.

RecyOuest, based in Argentan, France, is a green economy company that handles the recycling contaminated filamentary thermoplastics such as round bale nets and twines. With its recycling process, RecyOuest is part of a circular economy approach.

The ANDRITZ recycling line can process up to 8,000 tons of waste and produce recycling fibers for nonwoven applications and also for pellets made of waste from agricultural single-use plastic nets and twines. These pellets are then returned to the plastics industry by mixing both recycled and virgin raw materials, thus reducing the amount of virgin plastic used.

RecyOuest, France, has successfully started up the world's first recycling line for agricultural plastic waste nets at its mill in Argentan. The innovative recycling line featuring a unique dry-cleaning system was delivered, installed and commissioned by the international technology group ANDRITZ in August 2022.

RecyOuest, based in Argentan, France, is a green economy company that handles the recycling contaminated filamentary thermoplastics such as round bale nets and twines. With its recycling process, RecyOuest is part of a circular economy approach.

The ANDRITZ recycling line can process up to 8,000 tons of waste and produce recycling fibers for nonwoven applications and also for pellets made of waste from agricultural single-use plastic nets and twines. These pellets are then returned to the plastics industry by mixing both recycled and virgin raw materials, thus reducing the amount of virgin plastic used.

This line, inspired by the techniques from textile wastes recycling, is equipped with a unique mechanical dry-cleaning system that allows resource savings by avoiding the use of water and chemicals. This state-of-the-art ANDRITZ equipment allows RecyOuest to produce recycling fibers for nonwoven applications and also pellets for ever new eco-designed nets and twines for the agricultural sector, with the lowest possible environmental impact.

More information:
Andritz textile recycling agricultural textiles nets
Source:

ANDRITZ AG

print close
more
Photo Trützschler Card Clothing
08.12.2022

Trützschler Card Clothing expands its site in Neubulach

Trützschler Card Clothing (TCC), technology leader in the manufacture of high-performance card clothings for textile yarn processing, is expanding its site in Neubulach, Germany. With the twelve-million-euro investment, the supplier for the international textile machinery industry is expanding its production, warehouse and office capacities. A groundbreaking ceremony will take place during the coming winter.

The new building will expand the warehouse and logistics area by 600 square meters, to make a total area of 2,800 square meters. In the optimized cube of the new hall, a modern warehouse system will double the storage capacity. There will also be a fully automated warehouse for coils for sawtooth wires. During the construction phase, logistics and shipping will be temporarily outsourced to Pforzheim-Büchenbronn.

Trützschler Card Clothing (TCC), technology leader in the manufacture of high-performance card clothings for textile yarn processing, is expanding its site in Neubulach, Germany. With the twelve-million-euro investment, the supplier for the international textile machinery industry is expanding its production, warehouse and office capacities. A groundbreaking ceremony will take place during the coming winter.

The new building will expand the warehouse and logistics area by 600 square meters, to make a total area of 2,800 square meters. In the optimized cube of the new hall, a modern warehouse system will double the storage capacity. There will also be a fully automated warehouse for coils for sawtooth wires. During the construction phase, logistics and shipping will be temporarily outsourced to Pforzheim-Büchenbronn.

The move into the new building is planned for 2024. TCC will also expand the range of services and the production intensity at the site, while optimizing the process flows. Trützschler intends to recruit the additional employees required within a short timeframe by hiring new staff and offering apprenticeships at the Neubulach site. TCC employs more than 130 people in Germany, with a further 220 people employed worldwide at locations in Brazil, China, India, Mexico, Turkey and the USA.

Overall, the production area will be expanded from 4,000 to 5,400 square meters. This will enable the process flows to be optimized. The office space will be increased to 1,000 square meters. An additional level of the building will provide modern workplaces for administration and sales.

The new building will also improve access and exit routes for truck traffic. This will provide considerable relief for the local neighborhood in terms of noise emissions and other factors. Good integration into the region is very important to Trützschler. All contracts for planning, construction and air conditioning technology have been awarded to local companies.

In the future, TCC will operate its production facility in Neubulach in a climate-neutral manner. This will contribute important progress toward achieving the ambitious climate goals of the Trützschler Group. The new production facility will meet the highest requirements for energy efficiency and climate protection. Heating is provided by process heat recovery and geothermal energy. In addition, the company produces green electricity via its own solar panels.

"By expanding our business here in Neubulach, we are strengthening our presence in this area and our leading global market position too," says Managing Director Peter Gäbler. The Trützschler Group SE is also investing in India to build a new site with over 100,000 square meters for the Spinning, Card Clothing and Nonwovens business units. "It is important to be close to the customer worldwide because our foreign companies make a significant contribution to the success of the Group," says Gäbler.

TCC achieved another record sales result in 2021. Demand for the technology components for carding fibers in spinning mills and for carding in nonwovens production has increased significantly. The steel sawtooth wires, which are wound onto coils and produced for customers around the globe, eventually get worn down by use in production processes – so it is necessary to replace them regularly. For this reason, further growth is expected in 2022 and beyond.

 

More information:
Trützschler Card Clothing
Source:

Trützschler Card Clothing

print close
more
Grafik Groz-Beckert
22.11.2022

Groz-Beckert at India ITME 2022

The 11th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

The 11th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

Groz-Beckert will also be demonstrating its competence as a system supplier in the field of warp knitting at the India ITME. The warp knitting machine needles and system parts from Groz-Beckert are precisely matched to one another and achieve a uniform and flawless warp knitting process.

With the WarpMasterPlus and the KnotMaster, the Weaving product division presents the latest generation of drawing-in and knotting machines from Groz-Beckert. They are particularly distinguished by their ease of operation and flexibility.

The product area Felting (Nonwovens) presents its product and service highlights for the nonwovens industry. These include the HyTec P jet strip for spunlace customers as well as the GEBECON felting needle, the dur needle, EcoStar felting needle and the Groz-Beckert customer product. The HyTec P-nozzle strip is characterized by improved handling and higher hardness. The patented GEBECON felting needle offers an improved surface finish and optimized breakage bending properties.

The Carding product area will present its further developments for the spinning industry. These include the new stationary flat series, the TV56 revolving top and the cylinder wire set with special tooth geometry. The new stationary flat series is characterized by an innovative tooth geometry and a new type of tooth distribution. The new TV56  revolving top with its new setting pattern and 560 points per square inch is particularly easy to clean. The improved cylinder wire convinces with its special and patented tooth shape, which has a positive effect on the maintenance effort. This makes it particularly suitable for quality-oriented cotton spinning mills producing high-quality yarns. Visitors can also look forward to the new InLine card clothing series for the nonwovens sector.

In the Sewing exhibition area, the focus is on technical textiles – in particular the manufacture of car seats. The answer to the high demands of sewing car seats is the special application needle SAN® 5.2 from Groz-Beckert. The special geometry gives it sufficient stability. The double groove at the point improves thread guidance and leads to a uniform seam pattern, especially in multidirectional sewing processes. The scarf chamfer on both sides of the needle prevent skipped stitches and optimize loop formation. The wear protection is increased by the titanium nitride coating GEBEDUR. In addition, the quality management INH will be exhibited and the functions and contents of the customer portal will be presented.

More information:
India ITME Groz-Beckert
Source:

Groz-Beckert KG

print close
more
(c) Monforts
10.11.2022

Monforts part of the VDMA Trade Delegation to Turkmenistan

Monforts will take part in a VDMA textile technology trade delegation to Turkmenistan from November 21-26, on behalf of the German Federal Ministry of Economics.

Around 80% of Turkmenistan’s production of textiles and garments is currently exported, with a value of $350 million in 2020. This is now expected to rise to $450 million by 2023.

In addition to expanding in cotton yarns and fabrics, the country is also looking to enter other textile markets, including nonwovens, carpets and absorbent hygiene products, and negotiations are currently underway between the Turkmenistan Ministry of Textile Industry and the Korean Institute of Industrial Technologies to also commence manufacturing synthetic fibres from polymers.

In 2021, a new textile complex was opened by state-owned textile manufacturer Cotam in the city of Kaka, which is aiming to produce 3,650 tons of yarn, 12 million square metres of different types of fabrics and 1.2 million tons of finished products annually, with the creation of 1,300 new jobs.

Monforts will take part in a VDMA textile technology trade delegation to Turkmenistan from November 21-26, on behalf of the German Federal Ministry of Economics.

Around 80% of Turkmenistan’s production of textiles and garments is currently exported, with a value of $350 million in 2020. This is now expected to rise to $450 million by 2023.

In addition to expanding in cotton yarns and fabrics, the country is also looking to enter other textile markets, including nonwovens, carpets and absorbent hygiene products, and negotiations are currently underway between the Turkmenistan Ministry of Textile Industry and the Korean Institute of Industrial Technologies to also commence manufacturing synthetic fibres from polymers.

In 2021, a new textile complex was opened by state-owned textile manufacturer Cotam in the city of Kaka, which is aiming to produce 3,650 tons of yarn, 12 million square metres of different types of fabrics and 1.2 million tons of finished products annually, with the creation of 1,300 new jobs.

Monforts has supplied seven complete finishing machine ranges to Turkmenistan company Cotam, as the Central Asian country looks to boost its production of cotton yarns and fabrics via an ambitious textile industry modernisation plan.

Cotam now has two separate manufacturing sites at Babadayhan and Kaka, both of which have now been equipped with Monforts technologies built at the company’s plant in St Stefan in Austria.

Cotam supplies finished fabrics to both the apparel and home textiles markets and at its Babadayhan plant is now operating two Montex stenter lines and a Monfortex sanforizing line. At its new Kaka plant, the company has also installed two Montex stenter lines, as well as a Thermex universal hotflue for continuous dyeing and curing.

“Turkmenistan celebrated 30 years of independence in 2021 and has made a giant leap forward in its progressive development,” said Monforts Managing Director Stefan Flöth. “A textile industry equipped with modern high-tech equipment has been created factories and equipped with the most advanced and high-performance equipment built and put into operation. We are extremely pleased that the Ministry of the Textile Industry of Turkmenistan chose Monforts machinery for its new textile complex in Kaka and together with the machines for Babadayhan and other recent projects we are proud to say that 15 Monforts machines are now established in the country.”

More information:
VDMA Textilmaschinen VDMA Monforts Turkmenistan
Source:

AWOL for Monforts

print close
more
Dr. Harald Weber and Thomas Waldmann. Photo: VDMA
from left to right: Dr. Harald Weber and Thomas Waldmann.
08.11.2022

VDMA Textile Machinery Association: Dr Harald Weber succeeds Thomas Waldmann

Dr. Harald Weber will become the new managing director of the VDMA Textile Machinery Association on 1 January 2023. The 44-year-old industrial engineer succeeds Thomas Waldmann, who has held the position since 1991 and will retire at the end of the year.

After completing his doctorate at the Technical University of Darmstadt and working as a lecturer at the University of Applied Sciences Mittelhessen (THM), Dr. Weber joined the VDMA in 2011. Since then, he has been responsible for the topics of technology and innovation in the Plastics and Rubber Machinery Association.

Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, commented on the change of personnel: "From his previous work in the plastics industry, Dr. Weber has profound knowledge and experience in topics that are also gaining in importance in textile machinery manufacturing. Examples include recycling and the circular economy, as well as digitalisation and especially the communication standard OPC UA."

Dr. Harald Weber will become the new managing director of the VDMA Textile Machinery Association on 1 January 2023. The 44-year-old industrial engineer succeeds Thomas Waldmann, who has held the position since 1991 and will retire at the end of the year.

After completing his doctorate at the Technical University of Darmstadt and working as a lecturer at the University of Applied Sciences Mittelhessen (THM), Dr. Weber joined the VDMA in 2011. Since then, he has been responsible for the topics of technology and innovation in the Plastics and Rubber Machinery Association.

Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, commented on the change of personnel: "From his previous work in the plastics industry, Dr. Weber has profound knowledge and experience in topics that are also gaining in importance in textile machinery manufacturing. Examples include recycling and the circular economy, as well as digitalisation and especially the communication standard OPC UA."

Dr. Horn added: "We combine our warm welcome to Dr. Weber with a big thank you to Thomas Waldmann. 30 years as managing director at the Textile Machinery Association also stand for constantly changing framework conditions. Mr. Waldmann has always had his finger on the pulse of the industry and, together with his team, has represented the special interests of the member companies: From technology policy to challenges of market access to the leading trade fair ITMA and the European association CEMATEX. ITMA 2007 in Munich was certainly a highlight. The executive board of the association wishes Mr. Waldmann all the best for the new phase of his life that is now beginning."

More information:
VDMA Textilmaschinen Thomas Waldmann Harald Weber
Source:

VDMA e. V.
Textile Machinery

print close
more
(c) JIAM, Messe Frankfurt Japan Ltd
07.11.2022

JIAM 2022 OSAKA taking place after a six year break

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

As of October, 144 exhibitors from 10 countries and regions (China, Greece, Germany, Hong Kong, India, Italy, Singapore, Taiwan and Thailand) have signed up for JIAM 2022 OSAKA to showcase their latest products and services. Of these, 39 companies (21 domestic, 18 overseas) will be joining the fair for the first time. In addition, two pavilions from Germany (VDMA; Mechanical Engineering Industry Association) and Taiwan (TSMA; Taiwan Sewing Machinery Association) will bring even more product diversity to the show floor. The previous edition of JIAM OSAKA in 2016 welcomed 258 exhibitors from 15 countries and regions as well as 15,257 visitors from 72 countries and regions, mainly from Bangladesh, China, India, Korea, Taiwan, Sri Lanka, and Vietnam.

A wide variety of special seminars
11 special organiser seminars will not only provide relevant industry knowledge, but also offer practical skills for daily work:

  • Manufacturing industry and digital technology
    Mr Atsushi Yasuda, Manager of Ministry of Economy, Trade and Industry Manufacturing Industries Bureau,Industrial Machinery Division
  • Skills training seminar
    1. Twist Jacket (Lapel) pattern and matching sewing (front and shoulder seams)
    2. Shoulder keeper (prevent shoulder collapse) cherish a piece of clothing
    Mr Susumu Inarida, Emeritus Professor of Bunka Fashion Graduate University (BFGU) / Specially Appointed Committee Member of Japan Modelist Associate / Contemporary Master Craftsman Certified by the Ministry of Health, Labor and Welfare
  • "Mottainai!" sustainable initiatives from Osaka!
    Common points between Senshu Towl and OSAKA KABAN and the future
    Mr Eiji Shinoda, President of Shinoda cCorp
    Mr Kenji Fukuroya, Representative Employee of Fukuroya Joint Company etc.
  • About the sustainable fashion community “NewMake”- Upcycling initiatives in collaboration with brands
    Mr Tac Hosokawa, CEO of Story & Co.
  • Win - win strategy on underwear sewing, viewpoint of BISEI SANGYO Co., LTD
    Mr Toru Miyawaki, Managing Executive Officer of BISEI SANGYO Co.,LTD / Chairman of Hikoneseni Cooperative

Home Sewing Machine Zone
Catering to the B2C market, the Home Sewing Machine Zone, will feature major domestic household sewing machine suppliers. To promote the joy of sewing, a special workshop will be organised by Brother Industries Ltd, Janome Corp, JUKI Corp and JASMA covering topics such as the use of upcycled materials. As part of JIAM 2022 OSAKA’s sustainable development goals, visitors will be taught to sew “cup sleeves” using discarded items and materials from the DIY brand WHTATNOT. Attendees will also learn about upcycling, the process of upgrading unwanted items into new products that are useful. Another highlight will be the awards for JASMA’s “42th Home Sewing Competition for Elementary, Middle, and High School Students”.

More information:
JIAM Japan Sewing Machinery Manufacturers Association textile machinery
Source:

JIAM, Messe Frankfurt Japan Ltd / Messe Frankfurt (HK) Limited

print close
more
Texaid / Texcircle
26.10.2022

Swiss Textile Recycling Project TEXCIRLCE

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

More information:
Texaid Texcircle post-consumer recycled material spinning
Source:

Texaid / Texcircle

print close
more
Photo: Monforts
The new seven chamber Montex TwinAir stenter range with Montex®Coat coating at the plant.
26.10.2022

Dolinschek: Compression stockings in a variety of colours

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The Dolinschek brothers moved their business to the historic site of the former Ambrosius Heim textile company in Burladingen in 2001 in order to expand. At the time, the company – founded by their father in 1980 as a textile wholesaler before moving into dyeing – employed just 13 people. Within a year, the company had bought additional space at the site.

Now, with Theo in charge of technology and sales, and Erwin responsible for production, the company employs almost 100 people and operates on an integrated site of 35,000 square metres.

In 2005, a laminating department was established by the company and since 2012 investment in knitting machines has been ongoing.

“The further we went into vertical integration, the more of our own products we were able to position on the market and so we were also able to make ourselves more independent,” says Theo. “We have continued to develop and today we can produce high-quality fabrics for many fields, with 42 knitting machines, 36 dyeing machines, three stenter frames and many other production and processing machines.”

Dolinschek has also developed its own proprietary TMG dyeing machines which have subsequently been successfully sold to many other companies all over the world. There are currently 11 of these machines  in operation at the Burladingen site and around 45 installed at other companies.

For finishing technology, however, the company relies on Monforts, and has installed a new seven chamber Montex TwinAir stenter range with a Montex®Coat coating unit in knife execution, enabling the coating of dimensionally stable knitted fabrics with polyurethane or acrylate. Another unique feature is the Teflon-coated (non-stick) transportation belt through the system.

The Montex line is also equipped with integrated heat recovery and exhaust gas purification to ensure the most resource-efficient processing available on the market. The exhaust air goes from the Monforts heat recovery system into an existing air/water heat recovery system and then into an electrostatic precipitator.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily.

 

More information:
Dolinschek Monforts
Source:

AWOL Media

print close
more
Freudenberg´s gas diffusion layer production Photo: Freudenberg´s gas diffusion layer production.
20.10.2022

Freudenberg supplies gas diffusion layers for fuel cell stacks

Freudenberg Performance Materials (Freudenberg) has concluded a high-volume, multi-year contract with a global automotive tier one supplier to supply high-performance gas diffusion layers for the stacks forming the core of the fuel cell systems produced by the leading automotive supplier. Global target applications are mid-sized and heavy commercial vehicles as well as buses. Freudenberg is supporting the customer’s global fuel cell activities, thereby also accelerating the breakthrough of mass-produced fuel cell stacks.

Fuel cell technology is an important element of a successful energy transition. Gas diffusion layers play a key role in this context: they are indispensable for the functioning of a fuel cell and have a significant impact on the performance of a fuel cell stack.

Freudenberg Performance Materials (Freudenberg) has concluded a high-volume, multi-year contract with a global automotive tier one supplier to supply high-performance gas diffusion layers for the stacks forming the core of the fuel cell systems produced by the leading automotive supplier. Global target applications are mid-sized and heavy commercial vehicles as well as buses. Freudenberg is supporting the customer’s global fuel cell activities, thereby also accelerating the breakthrough of mass-produced fuel cell stacks.

Fuel cell technology is an important element of a successful energy transition. Gas diffusion layers play a key role in this context: they are indispensable for the functioning of a fuel cell and have a significant impact on the performance of a fuel cell stack.

A fuel cell converts the chemical energy of hydrogen and atmospheric oxygen into electricity. Functionally-optimized gas diffusion layers made of carbon-fiber based nonwoven are installed on both sides of a catalyst-coated membrane positioned in the middle of the fuel cell. The gas diffusion layers distribute hydrogen and oxygen evenly to the membrane and remove the electricity, heat and water generated by the CO2-free chemical reaction. They also protect the sensitive membrane and are optimized to suit the bipolar plate. A fuel cell stack is made up of several individual fuel cells.

Freudenberg already has more than 20 years of unique expertise in the development and production of gas diffusion layers for fuel cell applications in the mobility sector and for porous transport layers used in electrolyzers. Freudenberg is currently expanding its production capacity at its Weinheim headquarters by installing additional lines. Further investments are on the verge of implementation.

More information:
Freudenberg Freudenberg Performance Materials gas diffusion layers
Source:

Freudenberg

print close
more
(c) DiloGroup
Needle Module Holder
13.10.2022

DiloGroup at India ITME 2022

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

  1. Intense Needling:
    The development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses. It is also suited for uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
More information:
DiloGroup India ITME textile machinery
Source:

DiloGroup

print close
more
Foto: (c) Starlinger & Co Gesellschaft m.b.H.
11.10.2022

Starlinger PET recycling lines in India: Bottle-to-fibre and bottle-to-bottle

Ganesha Ecopet Private Limited, a subsidiary of Indian PET recycling pioneer Ganesha Ecosphere Ltd., has recently opened its new Warangal facility under the brand name Go Rewise where it produces rPET for filament yarns and fibres, as well as for food-grade packaging.  

The company has installed two Starlinger PET recycling lines in its facility in Warangal, Telangana state. Ganesha Ecopet plans to supply the produced rPET granulates under its newly introduced brand enterprise Go Rewise. Launched under the umbrella of one of India's rPET industry leaders, Go Rewise is committed to supplying highest quality rPET products that are produced in a resource-efficient process.
One Starlinger recycling line, a recoSTAR PET 165 H-VAC, processes washed PET bottle flakes for the Go Rewise polyester filament yarn applications and reaches an output of approx. 14,000 tons per year. With the second Starlinger recycling line, Ganesha is producing food-grade rPET resins.

Ganesha Ecopet Private Limited, a subsidiary of Indian PET recycling pioneer Ganesha Ecosphere Ltd., has recently opened its new Warangal facility under the brand name Go Rewise where it produces rPET for filament yarns and fibres, as well as for food-grade packaging.  

The company has installed two Starlinger PET recycling lines in its facility in Warangal, Telangana state. Ganesha Ecopet plans to supply the produced rPET granulates under its newly introduced brand enterprise Go Rewise. Launched under the umbrella of one of India's rPET industry leaders, Go Rewise is committed to supplying highest quality rPET products that are produced in a resource-efficient process.
One Starlinger recycling line, a recoSTAR PET 165 H-VAC, processes washed PET bottle flakes for the Go Rewise polyester filament yarn applications and reaches an output of approx. 14,000 tons per year. With the second Starlinger recycling line, Ganesha is producing food-grade rPET resins.

Ganesha Ecosphere looks back on 30 years of experience in the PET recycling business and can be considered a role model regarding sustainable business activities. Founded in 1987, the company started out as a yarn processing facility. It was among the first companies in India to start reprocessing PET waste to manufacture recycled polyester staple fibre (RPSF) and recycled polyester spun yarns (RPSY) in 1994. By today, the group has established a large network of over 300 scrap vendors located across the country and operates four factories in India - two in Uttar Pradesh, one in Uttarakhand, and the recently opened one in Telangana. It also recently operationalised its first factory outside India in Nepal. With over 500 customers and exports to more than 18 countries, the company ranks among the largest rpet producers in India with 130,000 tonnes per year and currently recycles around 16 - 18 % of India's total PET waste.

More information:
Starlinger PET-Recycling recycled polyester
Source:

Starlinger & Co Gesellschaft m.b.H.

print close
more
(c) BTMA
The James Heal AirPro air permeability tester
11.10.2022

BTMA: Testing equipment manufacturer James Heal celebrates 150th anniversary

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

HydroView
The HydroView hydrostatic head tester is meanwhile designed to measure the penetration of water in materials which have an end use that requires water resistance, such as those in the medical, geotextiles and nonwovens sectors. It is also proving essential in the testing of end-use applications for technical textiles, such as in protective gloves, diving dry suits and winter sports apparel, to fishing waders, roofing, tenting, ground sheets and more.

More information:
BTMA British Textile Machinery Association James Heal textile testing
Source:

BTMA / AWOL Media

print close
more
Photo: Sellers Textile Engineers
Hybrid Shearing Cylinder
10.10.2022

The Hybrid Shear by Sellers Textile Engineers

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

“The Hybrid Shearing Cylinder has all the advantages of the ‘strap-on’ spiral blade to provide a sharper and cleaner cut, along with enhanced rigidity which significantly lengthens the intervals between the necessary regrinding of the blade,” explains Sellers Director Neil Miller. “We currently have six Hybrid Shearing Cylinders operating in the field and the earliest, which has been installed in both No1 Head position, where the majority of the shearing operation and heaviest cut is performed, and also in No3 Head, where the sharper cutting angle has resulted in a much improved surface quality.”

Sellers shearing machines have led the field in carpet finishing for many decades, enabling the leading manufacturers to stay competitive by enabling the highest quality of finish to be achieved economically and efficiently.

The latest advanced features of these machines include a load cell tension control drive system, an automated touchscreen for easy operator control and fault diagnosis, an enhanced cleaning system including cylinder and blade separation and fully controllable pivoting beds. Further options include thickness monitoring, seam detection and metal detection systems.

“The Hybrid Shearing Cylinder will become standard on our latest machines and also be made available for retrofitting, to provide significant benefits to our existing users,” says Miller. “All of our equipment is designed, manufactured, assembled and tested at our plant in the UK, and as one of the few remaining European engineering companies to make all of our components in-house – with now over a century of accumulated know-how – flexibility in design allows our finishing solutions to be targeted to specific customers and their product requirements. Aligned to this is a lead in process control systems which ensure the accurate control, reliability and repeatability of the processing parameters on all of our machines.”

Sellers remains committed to providing complete finishing solutions for all carpet, tile and artificial grass products. Its range includes machines for tufted secondary backing, both conventional, powder and extrusion lamination, Wilton and Axminster products, artificial grass and foam lines, coating lines for bitumen, PVC, PU and other polymers, as well as shearing for all carpet products.

Ongoing developments on the company’s coating and drying lines have resulted in improved guiding and product tension control as well as dryer efficiency, reducing heat loss and optimising energy use. These include a re-design of the fan pressure boxes and impingement nozzles to increase airflow efficiency, modulating gas burners and introducing easy clean, accessible filters.

In addition, the proven dual zone system has been enhanced, giving a temperature differential of up to 80°C between top and bottom zones. Dryers can be heated by either gas or steam and operation and access have been simplified with controls via touchscreen and PLC.

An extensive range of ancillary equipment is available to provide maximum flexibility to cover product requirements, for both new processing lines and as upgrades to existing equipment.

“Carpet manufacturing is now based on well-established, tried and trusted processes and it’s rare for new innovations to be introduced into this sector,” says Jason Kent, CEO of the British Textile Machinery Association. “The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field. It’s one of a number of new innovations the company is planning to showcase at next year’s ITMA exhibition in Milan.”

More information:
Sellers Textile Engineers shearing cylinders textile finishing Carpets
Source:

AWOL Media

print close
more
(c) Mimaki Europe B.V.
07.10.2022

Mimaki announces Third Virtual Global Innovation Days Event

Mimaki announce their third Global Innovation Days (19th – 21st October 2022). This collaborative virtual experience unites Mimaki’s regional offices to discuss trends across the different markets and the American, Asian, and European regions operated in by Mimaki, through a series of live and pre-recorded demonstrations, webinars, and round-table discussions. The programme of events will be led by experts from Mimaki Europe, Japan, USA and Australia.

With a focus on addressing the queries and requirements across the many facets of the print industry, the event will see collaborations with the likes of FESPA, from whom spokespeople will be attending to discuss the latest trends and innovations identified at FESPA this year, as well as a look ahead to next year’s event and what people can expect to see.

Mimaki announce their third Global Innovation Days (19th – 21st October 2022). This collaborative virtual experience unites Mimaki’s regional offices to discuss trends across the different markets and the American, Asian, and European regions operated in by Mimaki, through a series of live and pre-recorded demonstrations, webinars, and round-table discussions. The programme of events will be led by experts from Mimaki Europe, Japan, USA and Australia.

With a focus on addressing the queries and requirements across the many facets of the print industry, the event will see collaborations with the likes of FESPA, from whom spokespeople will be attending to discuss the latest trends and innovations identified at FESPA this year, as well as a look ahead to next year’s event and what people can expect to see.

Attendees will also have the opportunity to further explore the latest additions to Mimaki’s product portfolio, with demonstrations of the technologies and the applications that they are able to create coming live from the Mimaki showroom in Amsterdam. The 330 series, including the JV330-160, CJV330-160 and TS330-1600, will be showcased, as well as the full-colour capabilities of the 3DUJ-2207 3D printer, and Mimaki’s latest flatbed printer, the JFX600-2513, which boasts speeds thrice superior to that of its predecessor. Another highlight of the event will be a discussion held with leading print media and software vendors, to examine the current market trends from outside of the manufacturing perspective.

More information:
Mimaki Mimaki Europe Global Innovation Days digital printing textile printing
Source:

Mimaki Europe B.V.

print close
more
06.10.2022

Rieter and the Johann Jacob Rieter Foundation Sponsor Professorship for AI

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Building Expertise in the Field of Industrial AI
The Endowed Professorship will serve to build expertise in the field of Industrial AI and will oversee a group that will focus on teaching and research pertaining to trustworthy machine learning. This involves, for example, the deployment of artificial intelligence with the aim of optimizing production processes in relation to the use of raw materials and energy, and making expert knowledge more readily available.

In addition to research, for the purpose of knowledge transfer, the new professorship will also be active in teaching, in the bachelor's degree programs in Computer Science and in Data Science, in the Master of Science in Engineering, and in continuing education.

The annual commitment of CHF 300 000 over a period of six years will be financed equally by the Rieter Group and the Johann Jacob Rieter Foundation.
“The use of artificial intelligence in industry is becoming increasingly important, especially with regard to the potential of data for evaluation and control of complex processes. The support of the Johann Jacob Rieter Foundation and the Rieter Group will allow us to further expand AI research in the field of industrial applications,” explains Prof. Dr. Dirk Wilhelm, Director of the ZHAW School of Engineering.

“The use of Artificial Intelligence will make a significant contribution to automation and process optimization, and thereby advance sustainability in the textile industry. This makes it an important element of the leading technology that Rieter offers,” emphasizes Rieter CEO Dr. Norbert Klapper.

“The Smart Machines cluster is growing in importance,” says Thomas Anwander, member of the Foundation Board, and adds: “The Endowed Professorship for Industrial AI at the ZHAW aims to promote Winterthur as a technology location by pooling locally available strengths in mechanical engineering and Industry 4.0.”

More information:
Industrial Artificial Intelligence Rieter Holding AG ZHAW School of Engineering professorship
Source:

Rieter Management AG

print close
more
Photo: AWOL
20.09.2022

Halley Stevensons: Unique waxed cotton finishing with new Monforts line

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

Photo: AWOL
More information:
Halley Stevensons Monforts Monforts Textilmaschinen GmbH textile finishing waxed cotton
Source:

AWOL

print close
more