From the Sector

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

As a result, adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% – 13% range). Because of the less favorable market mix due to lower-than-expected revenues in Greater China as well as the impact from initiatives to clear excess inventories in this market until the end of the year, the company’s gross margin is now expected to be around 49.0% in 2022 (previously: around 50.7%). Consequently, the company’s operating margin is now forecasted to be around 7.0% in 2022 (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion – € 1.9 billion range).

So far, the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any other market. Nevertheless, the adjusted guidance also accounts for a potential slowdown of consumer spending in these markets during the second half of the year as a result of the more challenging macroeconomic conditions.

Despite these headwinds, adidas continues to expect double-digit revenue growth during the second half of the year for the total company. In addition to easier prior year comparables, the acceleration will be driven by adidas’ strong product pipeline, the restocking opportunity with its wholesale customers given unconstrained supply as well as the support from major sporting events.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the second quarter. This increase was driven by strong double-digit growth in North America and Latin America, high-single-digit growth in EMEA (also double-digit growth excluding negative Russia/CIS impact) as well as a return to growth in Asia-Pacific. In euro terms, sales increased 10% to € 5.596 billion. The company’s gross margin declined 1.5 percentage points to a level of 50.3% and operating margin reached 7.0% during the second quarter (2021: 10.7%). Net income from continuing operations was € 360 million in Q2 (2021: € 387 million) supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision.

• Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
• Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
• EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
• Action plan to increase sales and profitability
• Rieter site Winterthur
• Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level. Despite higher sales, the significant increase in material and logistics costs, additional costs for compensation of the material shortages and the expenditure incurred for the acquisition in the years 2021/2022 resulted in a loss. Rieter is implementing an action plan to increase sales and profitability. The sales process for the remaining land owned by Rieter was initiated.

Order Intake and Order Backlog
Rieter posted an order intake of CHF 869.4 million, which included CHF 176.6 million from the businesses acquired in the years 2021/2022. As expected, demand has thus returned to normal compared with the exceptionally high figure for the prior-year period, but remains well above the average figure for the last five years of around CHF 570 million (first half 2021: CHF 975.3 million, first half 2022 excluding acquisition effect CHF 692.8 million).

The regional shift in demand with investments in additional spinning capacity outside China along with investments in the competitiveness of Chinese spinning mills continues. Rieter benefits from its technology leadership, the innovative product portfolio and the completion of the ring- and compact-spinning system through the acquisition of the automatic winding machine business. The largest order intakes came from India, Turkey, China, Uzbekistan, and Pakistan.

On June 30, 2022, the company had an order backlog of more than CHF 2 100 million (June 30, 2021: CHF 1 135 million). Cancellations in the reporting period amounted to around 5% of the order backlog.

Sales
The Rieter Group posted sales of CHF 620.6 million, which included CHF 68.9 million from the businesses acquired in the years 2021/2022 (first half 2021: CHF 400.5 million).

As a result, sales were significantly higher than in the prior-year period, although preproduced deliveries, which mainly affected the Business Group Machines & Systems, in the three-digit million range had to be postponed until the second half of 2022. The reasons for the postponements were the COVID lockdown in China and supply chain bottlenecks.

EBIT, Net Result and Free Cash Flow
Rieter posted a loss of CHF -10.2 million at the EBIT level in the first half of 2022.

Earnings were impacted by significantly higher material and logistics costs. The price increases already implemented are having a delayed effect, mainly in the Business Group Machines & Systems, and were therefore unable to compensate for the high increase in costs. In addition, costs in connection with material shortages negatively impacted profitability. The result also includes acquisition-related expenses of CHF -11.2 million.

The loss at the net result level was CHF -25.2 million, of which CHF -17.6 million was due to the acquisition.

Free cash flow was CHF -57.1 million, attributable to the build-up of inventories in connection with the high order backlog and postponed deliveries.

Action Plan to Increase Sales and Profitability
Rieter is implementing a comprehensive package of measures with the aim of increasing sales and profitability in the second half of 2022.

The package focuses on two main priorities: Firstly, Rieter is continuing to systematically implement price increases while working to improve the quality of margins of the order backlog, so as to compensate for cost increases in materials and logistics.
Secondly, Rieter is working closely with key suppliers and is developing alternative solutions to eliminate material bottlenecks, as far as possible, in order to safeguard deliveries.

Rieter Site Winterthur
The Board of Directors has decided to begin the process for the sale of the remaining land at the Rieter site in Winterthur (Switzerland). In total, around 75 000 m2 of land will be sold.

Outlook
As already reported, Rieter expects demand for new systems to normalize further in the coming months. Due to the capacity utilization at spinning mills, the company anticipates that demand for consumables, wear & tear and spare parts will remain at a good level.

For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter expects sales of around CHF 1 400 million (2021: CHF 969.2 million). The reduced sales forecast compared to early 2022 (March 2022: CHF 1 500 million) reflects the impact of global supply bottlenecks. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known challenges.

Despite significantly higher sales, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well expenses in connection with the acquisition in the years 2021/2022. Despite the price increases already implemented, global cost increases continue to pose a risk to the growth of profitability.

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Eccentric screw pumps – robust all-rounders convey any medium
The requirements for pumps are considerable, as the demand for customized solutions for increasingly complex processes is rising. This is particularly true for Oerlikon Barmag’s new eccentric screw pump range. High wear-resistance, increased durability and robust operation – the new pump is tailor-made for conveying highly-filled, high-viscosity and abrasive media, such as filled adhesives, filled silicones and filled casting compounds, for example. The is the multi-stage seal system, which considerably increases the pump’s lifespan. The upstream shaft sealing ring protects the slide ring seal against excessively-fast wear caused by challenging media. In turn, the optimum alignment of the drive shaft – ball bearing-supported and centrally-guided through the shaft sealing ring – prevents any metal debris caused by friction and hence ensures considerably greater durability. Producers benefit from considerably greater productivity, as the pumps’ maintenance intervals and hence machine downtimes are significantly reduced.

New pump for shear-sensitive materials
For increasingly complex customer-specific process solutions, Oerlikon Barmag is now expanding its GA series, developed especially for the challenging conveying of high-viscosity media, to include the GAB51F for shear-sensitive conveying media. The newly-developed pump with its viscosity range of max. 300 Pas is tailored to conveying high-viscosity, shear-sensitive materials such as adhesives and silicones, for example. “The shear forces impacting the medium within the pump are reduced to a minimum as a result of a specially geometry”, explains Thorsten Wagener, Senior Sales Manager within the Pump Construction business unit. The material is conveyed through the pump in an as gentle and low-pulsation manner as possible and metered precisely at the outlet – ensuring it retains its characteristic properties.

High-speed metering pump with sealed product space
The high-speed metering pump has been especially developed for metering poorly-lubricating media. Here, the main benefit is the sealed product space, which extends the pump’s lifespan considerably. The space that comes into contact with the media is limited to the area around the gears. “As a result, the high-speed pump is particularly suited for applications in the chemicals industry, which frequently involve aggressive acids”, comments Thorsten Wagener.

GM series for low-viscosity media
The pumps in the GM and GA series provide precision metering with low-pulsation feeding of the conveying medium. The multi-stage GM pump conveys low-viscosity media (i.e. 250 bar, 100 mPas) even under high pressure and in the most challenging conditions. The square design from the proven GM series is the standard pump for many metering tasks. The development of the multi-stage pump expands the applications range for the GM series considerably. The round 2-stage GM pump has been developed especially for use in high-pressure technology. It masters the particular challenge of conveying small throughputs with low viscosities. The pump is perfect for 0.05 through 20 cm³/rev feed sizes and is excellently suited for use in high-pressure machines for PUR molded parts, foam slab stock, refrigeration unit insulations and sandwich panels, for example.

GA series pumps for high-viscosity media
The Oerlikon Barmag GA range has been especially developed for the challenging conveying of media with higher viscosities. The GA series pumps are available for conveying volumes of between 1.25 and -30 cm³/rev (0.6-144 l/h). They have been designed for pressures of up to 200 bar, for viscosities of up to 1.500 Pas as well as for temperatures of up to max. 225 °C. With this range of pumps, Oerlikon Barmag offers its customers tailor-made solutions for many technical processes in which high-precision and even metering is of paramount importance.

The drum pump – conveying and metering using a single unit
With the drum pump, the Oerlikon Barmag pump specialists have created a pump designed specifically for conveying and metering high-viscosity materials such as adhesives, silicones and other high-viscosity materials from drums and other large containers and for pressures of up to 250 bar. Its special features not only include the fact that it removes high-viscosity materials from the drum, but that it also meters the medium directly without any additional interim stops.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Montalvo, an international specialist in Web Tension Control and Web Handling, publishes an article educating users on how to troubleshoot and test Load Cells. Load Cells play an integral role in measuring the Web Tension throughout the process, and as such, they must be accurate and function properly at all times. Furthermore, they are required to perform in every environment, which, at times, can present numerous challenges to their functionality, and thus knowing how to troubleshoot Loads Cells could shorten machine downtime. In this brief article, Montalvo explains why Load Cells fail and provides four ways to troubleshoot, diagnose and solve any missed performance features.  
 
Doug Brockelbank, Director of Technical Sales and Service, says, “Providing high-quality products is one thing; but providing technical support 5, 10, and even 20 years after the products were installed is entirely different. Montalvo’s technical support and services are one of our known key differentiators in the market, and we pride ourselves on it. Our Load Cells are designed to work in the roughest environments without any difficulties. But as rare as it is, Load Cells can start to miss perform, and in this case, our customers know that Montalvo is here for them. The goal of our internal sales support and technical services team is to provide our customers with the support they require, whether that be videos, technical articles, or in-person or over-the-phone support.

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

For advanced defect detection, Baldwin’s Guardian PQV 100% Print Inspection camera systems can be mounted on one or both sides of the product to perform 100% print-quality inspection, verify variable data and inspect the most challenging security print features. The system offers lighting options for all materials and substrates, as well as for special applications, including holograms, covert serialization, covert security features and more. The Guardian PQV can also be retrofitted to existing presses, machines and transports.
 
As part of a data-connected defect-management workflow, the Guardian PQV is a feature-rich inline defect-detection system that enables printers to find and remove defects quickly—and monitor their processes to prevent defects from occurring again or repeatedly. This technology provides complete print-quality verification from prepress through production, reporting and archiving for perfect runs.

Baldwin recently realigned its sales teams to optimize service and simplify access to its process-improvement and consumables technologies for printing and packaging customers in more than 100 countries. Two new sales professionals have since joined the team, covering smaller regional geographies and providing customers with a single point of contact for all of Baldwin’s product lines.

• Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
• Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
• Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
• Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
• Net income from continuing operations reaches € 310 million
• FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate. Backed by an exceptionally strong wholesale order book and relentless focus on driving growth in our own DTC channels, we expect this positive development to continue for the rest of the year,” said adidas CEO Kasper Rorsted. “In the East, we will return to growth in Asia-Pacific in the second quarter, while we expect the challenging market environment in Greater China to continue. With strong double-digit growth in the vast majority of our markets, representing more than 80% of our business, we are well positioned for success in 2022. “

For the full press release, see attached document.

This month, the circular knitting machine manufacturer Mayer & Cie. is launching its upgrade kits for circular knitting machines that are already successfully in use by customers. With tailor-made packages, the company wants to give its users the opportunity to take advantage of technological progress in their existing machines. The aim is to improve the performance of the existing machines and to extend their service life. In addition to the machine-specific upgrade kits, the company now starts offering tailormade spare parts packages. They are intended to ensure machine availability and equip customers with spare parts for standard situations. In addition, they offer a degree of independence from possible failures in the supply chain and rising transport costs.

Longevity, a popular product property
“Longevity of our circular knitting machines is definitely a property that our satisfied customers mention regularly”, Mayer & Cie. sales director Wolfgang Müller says. The company estimates that up to 50 percent of all the circular knitting machines it has ever made are still around in the market somewhere.

Upgrades boost performance and value
Value retention, maintenance and upgrades for existing machines are a key issue for the company – and for the customers who successfully use existing Mayer & Cie equipment. That’s why the company recently launched customised upgrade kits to improve the long-term performance of machines.

Low budget, clear benefit
Compared to a new machine, upgrade kits are a low-cost investment that deliver clearly defined benefits. For example, an improved yarn guide ensures a significant increase in the plating reliability and output of the machine in question.

Most of the upgrade kits is machine-specific; the aforementioned yarn guide ensures a boost in productivity for the Relanit 3.2 II and Relanit 3.2 S. For S4 machines an optimised fluff blowing device can be the solution. It ensures that less fluff is knitted in and thereby improves the fabric quality. It also reduces downtimes that would otherwise be required for cleaning. Upgrade kits suitable for most Mayer & Cie. machines are the edge trimmer to open a fabric hose before the fabric’s rolling-up and the laying facility for high-quality hose fabric.

Spare part packages: Inside is what is required
In addition to individual upgrade kits Mayer & Cie. now offers spare parts packages. They too are customised for individual machines. When purchasing a machine, the customer can also order a small or a large spare parts package. Selected specially for the machine in question, it contains the most important consumables and spare parts.
The new spare parts packages also increase customers’ independence of supply chain failures and rising transport costs.

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

The winding machine business with new machines will be assigned to the Business Group Machines & Systems, and the after-sales business will be assigned to the Business Group After Sales. The Accotex and Temco component businesses are managed by the Business Group Components.