From the Sector

Reset
297 results
15.07.2024

Intertextile Shanghai Home Textiles unveils programme

In sync with the fair’s 30th anniversary, the sourcing platform will host around 12 fringe events for fairgoers to stay ahead of the curve, under the following segments: Design Inspiration, Business O2O, Textiles & Technologies, and Industry Empowerment. Intertextile Shanghai Home Textiles has joined forces with Danish trend agency SPOTT trends & business to present the design theme for 2025 – ‘Healing Home’ – together with eight trend directions set to captivate the home textiles market. Set to be a hotspot for in vogue sourcing and industry exchange, the show will take place at the National Exhibition and Convention Center (Shanghai) from 14 – 16 August 2024.

In sync with the fair’s 30th anniversary, the sourcing platform will host around 12 fringe events for fairgoers to stay ahead of the curve, under the following segments: Design Inspiration, Business O2O, Textiles & Technologies, and Industry Empowerment. Intertextile Shanghai Home Textiles has joined forces with Danish trend agency SPOTT trends & business to present the design theme for 2025 – ‘Healing Home’ – together with eight trend directions set to captivate the home textiles market. Set to be a hotspot for in vogue sourcing and industry exchange, the show will take place at the National Exhibition and Convention Center (Shanghai) from 14 – 16 August 2024.

To help home textile industry players set the tone and direction for the upcoming business season, the fair will present Trends 2025 along with leading trend agency SPOTT trends & business, to illustrate the ‘Healing Home– Spaces for Thriving Living’ theme that marks the path ahead for the evolving sector. This concept conveys the idea of a home that promotes a remedial, prosperous lifestyle, improving peoples’ general health and well-being, with several key factors contributing to the overarching theme:

  • Eight key directions: Age-Old Crafts, Nature-Tech Synergies, Regenerative Possibilities, Wellbeing Spaces, Colourful Gatherings, Bio-Engineered Innovations, Transitional Practices, and Circular Systems.
  • Five key colours: deep burgundy, warm terracotta, light creamy shade, saturated nostalgic green, and vaporous blue.

The founder of SPOTT trends & business, Ms Anja Bisgaard Gaede, will be onsite to share insights related to these new design trends. Fairgoers are invited to join her interactive trend tour, and physically experience the concepts steering the industry's future.

With the intention of sparking further design inspiration for industry players, an expert panel discussion of Chinese interior architects and designers, InterDesign Forum, will be held on the afternoon of Day 1. Focusing on design trend topics related to sustainability, Mr Shen Lei, Founder and Design Director of Interior Architects Design and the Chinese representative of the Intertextile International Lifestyle Trend Committee, will lead the discussion. Adding an international perspective, Ms Anja Bisgaard Gaede will join them for the accompanying round table talk.

In addition to serving as a gateway for efficient sourcing, the show will inspire fairgoers through its fringe programme, with various formats and topics unpacking current talking points.

Highlighted sessions include:    

  • Round table discussion: Bridging Borders: A Designer x Producer Talk on Sustainability – a dialogue between designers and manufacturers, exploring how to collaboratively overcome sustainability challenges and reconcile the demands of both sides, from both Eastern and Western perspectives.
  • Econogy Talks: selected exhibitors, including 3M, Advansa and many more, as well as a representative from Indorama will showcase their innovative green products, giving attendees in-person insights into some of the market’s latest sustainable developments in the Sustainable Fibre Forum. Additionally, a Messe Frankfurt representative will explain the Texpertise Econogy concept, the combination of economy and ecology that represents the sustainability activities in the company’s Texpertise Network. The discussion will show how crucial sustainability is for the economic success of a business today, and indicate how fairgoers can benefit from such an approach.

Beyond the subject of a greener textile industry, other topics will be explored at various events. With more to be announced in the coming weeks, the following seminars hosted by international experts will provide the latest trends and market updates:

  • Bridging Worlds: Design Strategies for Success in Middle Eastern Markets: Ms Esra Lemmens (Day 1)
  • How Psychology Impacts the Way We Design Spaces: Ms Pallavi Dean (Day 1)

Moreover, the 10th Home Textiles and Furniture Industry Ecological Integration Forum will bring together home textile and furniture brands to explore cross-industry collaboration and provide one-stop home solutions. The 30th China Home Textiles Design Festival & Designer Recommended Brand Awards will showcase the latest trends and achievements in home design, allowing participating brands to gain recognition from designers. Meanwhile, the 7th China International Fibre Art Exhibition will invite influential artists from home and abroad to present diverse contemporary fibre artworks; and the China Intangible Cultural Heritage of Textile Exhibition will showcase some remarkable displays.  

Source:

Messe Frankfurt HK, Ltd

15.07.2024

ACI: Launch of Bio-Based Textiles in Clothing: Europe 2025 Conference

ACI announces the launch of its conference, Bio-Based Textiles in Clothing: Europe 2025.

Following in the footsteps of the successful Biobased Coatings Europe series with latest edition bringing together over 160 senior level attendees in Valencia in June 2024, this inaugural conference will explore the latest advancements in sustainable clothing made from renewable resources.

Taking place on the 15th & 16th January 2025 in Helsinki, Finland, just after the EU's pivotal Textile EPR Directive comes into force, this event will provide a deep dive into the world of bio-based textiles, examining how plants, microbes, and other novel organic feedstock are being revolutionised into sustainable, stylish garments.

ACI announces the launch of its conference, Bio-Based Textiles in Clothing: Europe 2025.

Following in the footsteps of the successful Biobased Coatings Europe series with latest edition bringing together over 160 senior level attendees in Valencia in June 2024, this inaugural conference will explore the latest advancements in sustainable clothing made from renewable resources.

Taking place on the 15th & 16th January 2025 in Helsinki, Finland, just after the EU's pivotal Textile EPR Directive comes into force, this event will provide a deep dive into the world of bio-based textiles, examining how plants, microbes, and other novel organic feedstock are being revolutionised into sustainable, stylish garments.

Source:

ACI (Europe)

Natural Materials Panel at Functional Fabric Fair (c) Formidable Media
10.07.2024

Natural Materials Panel at Functional Fabric Fair

  • “Natural Materials: The Path Towards Brand Responsibility” Panel Discussion Comes to Functional Fabric Fair in NYC

As global regulations and increased customer concern drive the demand for sustainable products, forward thinking brands are increasingly turning to natural materials as a sustainable alternative.

This panel will spotlight how newer biomass-based textiles are complementing established materials like down and wool to not only enhance performance but also to meet evolving consumer demands for eco-friendly products.

Hosted by textile industry communications agency Formidable Media and scheduled for Tuesday, July 16, this panel will provide an inside look at how natural materials can be leveraged to grow brand responsibility while elevating textile performance.

  • “Natural Materials: The Path Towards Brand Responsibility” Panel Discussion Comes to Functional Fabric Fair in NYC

As global regulations and increased customer concern drive the demand for sustainable products, forward thinking brands are increasingly turning to natural materials as a sustainable alternative.

This panel will spotlight how newer biomass-based textiles are complementing established materials like down and wool to not only enhance performance but also to meet evolving consumer demands for eco-friendly products.

Hosted by textile industry communications agency Formidable Media and scheduled for Tuesday, July 16, this panel will provide an inside look at how natural materials can be leveraged to grow brand responsibility while elevating textile performance.

The discussion will feature insights from leaders in sustainability and textile innovation, exploring the opportunities and challenges in adopting natural materials within supply chains. Attendees can expect a deep dive into the latest advancements and best practices that are shaping the future of responsible sourcing and manufacturing in the textile sector.

Panelists include:

  • Matthew Betcher, Creative Director, ALLIED Feather + Down
  • Monica Ebert, Business Development and Sustainability, Manager, Woolmark
  • Sharon Perez, Senior Business Development Manager, Lenzing Group
  • Chad Kelly, President, eVent Fabrics
Source:

Formidable Media

KARL MAYER North America: Successful Textiles Innovation Conference (c) KARL MAYER GROUP
09.07.2024

KARL MAYER North America: Successful Textiles Innovation Conference

The 2nd Textiles Innovation Conference held by KARL MAYER North America proved to be a complete success. The trade event took place from June 25 to 27, 2024 at the headquarters of the KARL MAYER GROUP subsidiary in Greensboro, North Carolina. The conference boasted a turnout with over 200 attendees, exhibitors, and keynote speakers. While the majority hailed from many states across the USA, the event also attracted a global audience, including participants from Italy, Canada, Mexico, and other countries. The central theme: the importance of textiles made in the USA, their value and influence on global markets.

The 2nd Textiles Innovation Conference held by KARL MAYER North America proved to be a complete success. The trade event took place from June 25 to 27, 2024 at the headquarters of the KARL MAYER GROUP subsidiary in Greensboro, North Carolina. The conference boasted a turnout with over 200 attendees, exhibitors, and keynote speakers. While the majority hailed from many states across the USA, the event also attracted a global audience, including participants from Italy, Canada, Mexico, and other countries. The central theme: the importance of textiles made in the USA, their value and influence on global markets.

The conference brought together leading industry brands and academic institutions to delve into the future of product development and sustainability in textiles. KM.ON, Black Swan, Meta, and Supreme shared a convergence of ideas, challenges, and groundbreaking advancements shaping the textile landscape. NC State and Kent State universities highlighted their efforts in developing local talent and enhancing research capabilities to meet industry demand for regional supply chains. Manufacturing Solutions Center, Southern Textile Association, and AFFOA (Advanced Functional Fabrics of America) explored research capabilities and technology testing to foster funding opportunities and generate ideas for the future.

The recipe for success also included a lecture program. The conference kicked off with a keynote speech from New Balance, a brand that empowers people through sport and craftsmanship. New Balance MADE U.S., their premium collection manufactured domestically, reflects their commitment to quality and community impact. On day two Kenny Wilsey, Sourcing Director at Dillard’s, shared his expertise to ensure adherence to quality standards and social compliance requirements for private label brands. To complete the speaker series, Allison Hicks, Lead Knit Engineer at Under Armour, inspired attendees with her innovative approach to performance footwear, apparel, and accessories.

Important topics at the conference were sustainability and digitalization: Unifi showcased high-performance fibers made from recyclable materials and pre- or post-consumer waste management initiatives. KM.ON, the digital solution company of the KARL MAYER GROUP, displayed artificial intelligence applications for quality control, supply chain optimization, and predictive maintenance for warp knitting and knitwear production.

The Textile Innovation Conference program was rounded out by an exhibition of selected textile supply chain partners. These business partners supplemented the information about innovation presented in the lectures and performance demonstrations of the latest STOLL flat knitting and KARL MAYER warp knitting machines.

Source:

KARL MAYER Verwaltungsgesellschaft AG

INDA: Winner of World of Wipes Innovation Award® (c) INDA
28.06.2024

INDA: Winner of World of Wipes Innovation Award®

INDA, the Association of the Nonwoven Fabrics Industry, announced that wipes leaders across the supply chain convened for new connections, intelligence, sustainability strategies, and business at the World of Wipes® (WOW) International Conference, June 17-20 in Minneapolis, Minnesota.

The winner of the World of Wipes Innovation Award® was Rockline Industries for their Facial Care Wipe with Glycine Amino Acid Complex. This new Skin Care Wipe contains a unique multifunctional complex of two medium chain glycine, a phospholipid and a blend of special glycol ingredients that provides for a multitude of skin care benefits as well as providing a unique preservation system for nonwovens. The Skin Care Wipe provides substantiated improved skin smoothness, elasticity, and hydration alongside an anti-ageing claim. This innovation is amongst the first to use these glycine ingredients in a Skin Care Wipe formulation.

INDA, the Association of the Nonwoven Fabrics Industry, announced that wipes leaders across the supply chain convened for new connections, intelligence, sustainability strategies, and business at the World of Wipes® (WOW) International Conference, June 17-20 in Minneapolis, Minnesota.

The winner of the World of Wipes Innovation Award® was Rockline Industries for their Facial Care Wipe with Glycine Amino Acid Complex. This new Skin Care Wipe contains a unique multifunctional complex of two medium chain glycine, a phospholipid and a blend of special glycol ingredients that provides for a multitude of skin care benefits as well as providing a unique preservation system for nonwovens. The Skin Care Wipe provides substantiated improved skin smoothness, elasticity, and hydration alongside an anti-ageing claim. This innovation is amongst the first to use these glycine ingredients in a Skin Care Wipe formulation.

In a special recognition, INDA presented the 2024 Lifetime Service Award to David Powling, Technical Leader, Kimberly-Clark Corporation (retired), and the 2024 Lifetime Technical Achievement Award to Paul Latten, Director of Research & Development & New Business, Southeast Nonwovens, Inc. INDA honors both Powling and Latten for their decades of contributions to the nonwovens industry as well as being strong advocates for INDA.

The 1.5-day WIPES Academy, led by Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC, and Paul Davies, Ph.D., Consultant, Crown Abbey, LLC, preceded the WOW Conference June 17-18. This course focused on the essentials of wet wipes construction and ingredients. Participants learned how to bring nonwovens, lotions, and packaging together to launch a successful product. The next WIPES Academy will be held July 21-22, 2025 at the Hilton Columbus Downtown, Columbus, Ohio in conjunction with WOW 2025.

The WOW conference program featured experts discussing these key topics:

  • Sparkle & Shine: How Wipes Became WOW
  • Wiping Smart: The Rise of Sustainable Practices in the Institutional and Industrial Wipe Markets
  • Transformative Trends in Wet Wipe Formulations: A Dual Focus on Skin Health and Sustainability
  • Leading Alternatives to Traditional Plastics Used in Wipes
  • Panel Discussion: Leading Alternatives to Traditional Plastics Used in Wipes
  • Eclectic Perspectives: Unraveling the Threads of I&I Wipes and Scaling Strategies
  • Putting $$ in Your Pocket
  • Recycling & Regulations

In addition to the premium content in the conference program, WOW featured four pre-conference webinars (with recordings available for full conference attendees), tabletop exhibits, Lightning Talks, a Skin Care Formulation Workshop 101, and a mentorship program for participants who are new to the wipes industry.

WOW 2025 will be held July 21-25, at the Hilton Columbus Downtown in Columbus, Ohio.

Source:

INDA, the Association of the Nonwoven Fabrics Industry

28.06.2024

VIATT 2025: Multifaceted fair poised to aid rejuvenation of Vietnam's textile industry

After navigating the challenges of 2023, Vietnam's textile and garment exports have been gradually recovering. Additionally, foreign direct investment (FDI) into Vietnam during the first five months of this year reached USD 11 billion, a 2% year-on-year increase, according to the Foreign Investment Agency under the Ministry of Planning and Investment (MPI). To cater to Vietnam’s renewed business opportunities, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will return from 26 – 28 February 2025 at the Saigon Exhibition and Convention Center (SECC).

After navigating the challenges of 2023, Vietnam's textile and garment exports have been gradually recovering. Additionally, foreign direct investment (FDI) into Vietnam during the first five months of this year reached USD 11 billion, a 2% year-on-year increase, according to the Foreign Investment Agency under the Ministry of Planning and Investment (MPI). To cater to Vietnam’s renewed business opportunities, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will return from 26 – 28 February 2025 at the Saigon Exhibition and Convention Center (SECC).

The fair’s inaugural edition attracted 409 exhibitors and 17,262 visits from 17 and 55 countries and regions respectively. Building on this solid foundation, VIATT 2025 will continue to showcase the latest industry trends, and expand its focus on various pertinent areas. This will include the fair’s new Econogy Hub, a dedicated zone to advance the topic of sustainability in the textile industry, and to relate it closely to the demands of economic and social change. Together with the evolving environmental landscape, the fair will also help industry players adapt to the rapid adoption of new technology in the business world with the debut of the Innovation & Digital Solutions Zone. This zone will allow exhibitors to unveil the latest technology and solutions such as AI design, digital manufacturing, big data analytics, and more.

Concurrently, VIATT 2025 will continue to present a diverse range of exhibitors across the apparel, home textile and technical textile sectors, with positive feedback received from many quarters at the fair’s inaugural edition.

Apparel Fabrics & Fashion
In the first four months of 2024, textile and garment exports grew 6.3% year-on-year to over USD 10 billion. The US remains Vietnam’s top export market, followed by the EU, South Korea, China, and Japan. To meet this demand, Vietnam's textile industry continues to import a significant amount of raw materials. At VIATT 2024, yarns, fibres and fabrics for casualwear, sportswear and uniforms, as well as garment accessories, were in high demand.

Home & Contract Textiles
Vietnam’s home textile market is projected to undergo a steady CAGR of 2.4% from 2024 – 2032, driven by the rising need for modern and stylish home textiles, e-commerce expansion, and favourable government initiatives. At the fair’s previous edition, product groups included bedding, loungewear and bathroom textiles, curtains and curtain fabrics, upholstery and sofa fabrics, and home textile accessories.

At VIATT 2025, exhibitors can additionally present their latest offerings in the Home Textiles Display Zone or at dedicated product presentations, to maximise their visibility to potential buyers.

Technical Textiles & Technologies
Across the textile industry, investors are now focusing on optimising production capacity, streamlining supply chains, and enhancing product quality to maintain competitiveness in both domestic and international markets. With the new Innovation & Digital Solutions Zone to supplement the textile technology category, VIATT 2025 is set to play host to providers of textile and nonwoven machinery, CAD/CAM, CMT, and technology for embroidery, knitting, sewing, printing, and more. Exhibitors can draw more attention to their latest solutions by participating in the fair's new innovation showcase area.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE), covering the entire textile industry value chain. The second edition will be held from 26 – 28 February 2025.

More information:
VIATT Vietnam
Source:

Messe Frankfurt (HK) Ltd

26.06.2024

TrusTrace: Upgraded Forced Labor Prevention Solution

TrusTrace, a SaaS company with a platform for product traceability and supply chain compliance in fashion and retail, announced the launch of its upgraded AI-powered Forced Labor Prevention (FLP) Solution, which will help brands proactively map out supply chains, screen it for risk, and efficiently gather evidence for regulatory compliance.

The Forced Labor Prevention solution combines the power of AI to manage large quantities of data from complex supply chains with scalable collection of primary data per purchase order, which is screened and validated for risk, ensuring brands have validated evidence at a product and shipment level.

TrusTrace, a SaaS company with a platform for product traceability and supply chain compliance in fashion and retail, announced the launch of its upgraded AI-powered Forced Labor Prevention (FLP) Solution, which will help brands proactively map out supply chains, screen it for risk, and efficiently gather evidence for regulatory compliance.

The Forced Labor Prevention solution combines the power of AI to manage large quantities of data from complex supply chains with scalable collection of primary data per purchase order, which is screened and validated for risk, ensuring brands have validated evidence at a product and shipment level.

The solution collects primary data directly from suppliers to ensure detailed and reliable information about facilities, products, and materials. The primary data collected through the TrusTrace solution is specific to the context of the traced products, contrary to solutions leveraging third party data, which can introduce large quantities of irrelevant information from various sources, creating ‘noise’ that can obscure critical insights and quickly become unmanageable. TrusTrace has traced more than two million purchase orders to date and has more than 55,000 suppliers and facilities mapped globally, demonstrating the capacity to automate the collection of primary data at very large scale.

The data is proactively screened for risk against the U.S. Customs and Border Protection (CBP) entity list, and the solution can integrate with any relevant risk screening database.

AI-Powered Chain of Custody Creation and Document Collection drives speed, accuracy and cost savings, making it quick and easy to gain supply chain visibility and stay on top of documentation for compliance. The FLP solution can classify, extract, and translate large volumes of documents in over 100 languages, facilitating the creation of a digital chain of custody, and transforming traditionally time-consuming manual processes, increasing efficiency, and reducing the likelihood of human error.

15 brands worldwide are already using TrusTrace for forced labor prevention, including Vera Bradley, who see proactive supply chain traceability and data management as key in achieving their ESG commitments.

Source:

TrusTrace

26.06.2024

ReHubs elects Board of Directors

ReHubs announces the election of its Board of Directors. The election came during the ReHubs Annual Event, this year hosted by Coleo in Barcelona, in which they presented their new Recycling Sorting Facility, prompted through their partnership with ReHubs.

The elected Board of Directors, comprising experienced and diverse industry leaders from ReHubs partner organisations, will support Executive Director Chris Deloof in developing ReHubs' capacity-building and knowledge-sharing projects. The Board includes; Acerina Trejo Machin (Resortecs), Alain Poincheval (Reju), Anna Pehrsson (TEXAID), Bouraoui Kechiche (DECATHLON), Carl Baekelandt (Concordia Textiles / PurFi), David Puyuelo Huguet (Coleo), Dirk Vantyghem (EURATEX), Félix Poza Peña (INDITEX), Mariska Boer (Boer Group), Outi Luukko (Rester), Véronique Allaire Spitzer (Refashion).

ReHubs announces the election of its Board of Directors. The election came during the ReHubs Annual Event, this year hosted by Coleo in Barcelona, in which they presented their new Recycling Sorting Facility, prompted through their partnership with ReHubs.

The elected Board of Directors, comprising experienced and diverse industry leaders from ReHubs partner organisations, will support Executive Director Chris Deloof in developing ReHubs' capacity-building and knowledge-sharing projects. The Board includes; Acerina Trejo Machin (Resortecs), Alain Poincheval (Reju), Anna Pehrsson (TEXAID), Bouraoui Kechiche (DECATHLON), Carl Baekelandt (Concordia Textiles / PurFi), David Puyuelo Huguet (Coleo), Dirk Vantyghem (EURATEX), Félix Poza Peña (INDITEX), Mariska Boer (Boer Group), Outi Luukko (Rester), Véronique Allaire Spitzer (Refashion).

The two-day ReHubs Annual Event featured a dynamic program where ReHubs twenty-five partners to date came together to connect and strengthen relationships, fostering collaboration and the exchange of innovative ideas. Additionally, ReHubs partners received policy updates from EURATEX and their possible implications for the industry and engaged in a discussion with the European Investment Bank on their Venture Debt Program and their Advisory Services.

As hosts of this year’s Annual Event, Spain-based organisation Coleo provided an exclusive preview of their new Recycling Sorting Facility to all ReHubs partners. The pre-opening of Coleo’s innovative facility in Mataró was a highlight, showcasing their latest advancements in textile sorting and recycling.

Source:

ReHubs

CARBIOS and TOMRA Textiles join forces (c) CARBIOS
Mathieu BERTHOUD, Strategic Sourcing Director, CARBIOS; Vibeke KROHN, Head of TOMRA Textiles; Emmanuel LADENT, CEO, CARBIOS; Mari Larsen SÆTHER, Recycling Lead, TOMRA Textiles
18.06.2024

CARBIOS and TOMRA Textiles join forces

CARBIOS and TOMRA Textiles, a tech venture set up by the sorting technology company TOMRA, announce the signing of an agreement to collaborate on establishing an efficient stream in Northern Europe from textile waste collection, sorting and preparation to recycling using CARBIOS’ enzymatic depolymerization technology at its first commercial plant currently under construction in Longlaville, France

The monomers obtained will be used to produce recycled polyester (r-PET) fiber, closing the loop for polyester textile circularity.

The innovations from both TOMRA Textiles and CARBIOS contribute to addressing critical gaps in the value chain and significantly increase textile-to-textile recycling from its current rate of 1%1. By accelerating a circular economy for polyester, a sustainable alternative to incineration or landfill is made available.

CARBIOS and TOMRA Textiles, a tech venture set up by the sorting technology company TOMRA, announce the signing of an agreement to collaborate on establishing an efficient stream in Northern Europe from textile waste collection, sorting and preparation to recycling using CARBIOS’ enzymatic depolymerization technology at its first commercial plant currently under construction in Longlaville, France

The monomers obtained will be used to produce recycled polyester (r-PET) fiber, closing the loop for polyester textile circularity.

The innovations from both TOMRA Textiles and CARBIOS contribute to addressing critical gaps in the value chain and significantly increase textile-to-textile recycling from its current rate of 1%1. By accelerating a circular economy for polyester, a sustainable alternative to incineration or landfill is made available.

TOMRA Textiles is on a mission to close the gap in textile circularity, by contributing to designing and scaling textile sorting plants. Under this partnership agreement, TOMRA Textiles will explore specific, tangible measures to enable the preparation of post-consumer polyester waste for biorecycling according to CARBIOS’ specifications.

CARBIOS' biorecycling technology involves breaking down polyester fibers into their basic components using enzymes, which are then used to produce high-quality recycled PET materials such as fibers for the textile industry. The breakthrough collaboration with TOMRA will redirect the challenging PET fraction of polyester textile waste towards biorecycling, showcasing a mutual dedication to pioneering recycling solutions for a circular economy.

1 Ellen MacArthur Foundation, 2017

Source:

CARBIOS

INDA applauds Passing of WIPPES Act (c) INDA
17.06.2024

INDA applauds Passing of WIPPES Act

INDA, the Association of the Nonwoven Fabrics Industry, applauds the U.S. House of Representatives for passing the Wastewater Infrastructure Pollution Prevention and Environments Safety (WIPPES) Act (H.R. 2964). The WIPPES Act, which creates national standards for “Do Not Flush” labeling for non-flushable wipes, passed out of the House Committee on Energy and Commerce in December of 2023, and on June 12, it cleared the House floor in a bipartisan vote. The bill now awaits consideration in the Senate Science, Commerce, and Energy Committee.

This bipartisan legislation is intended to address the growing problem of sewer system clogs caused by improper disposal of consumer wipes that are not intended to be disposed of in toilets. This federal solution is the result of a years-long industry collaboration with wastewater operators which has resulted in the passage of similar legislation in seven states. The WIPPES Act will create a national standard based on existing state laws to ensure non-flushable wipes will carry prominent “Do Not Flush” labeling on packaging.

INDA, the Association of the Nonwoven Fabrics Industry, applauds the U.S. House of Representatives for passing the Wastewater Infrastructure Pollution Prevention and Environments Safety (WIPPES) Act (H.R. 2964). The WIPPES Act, which creates national standards for “Do Not Flush” labeling for non-flushable wipes, passed out of the House Committee on Energy and Commerce in December of 2023, and on June 12, it cleared the House floor in a bipartisan vote. The bill now awaits consideration in the Senate Science, Commerce, and Energy Committee.

This bipartisan legislation is intended to address the growing problem of sewer system clogs caused by improper disposal of consumer wipes that are not intended to be disposed of in toilets. This federal solution is the result of a years-long industry collaboration with wastewater operators which has resulted in the passage of similar legislation in seven states. The WIPPES Act will create a national standard based on existing state laws to ensure non-flushable wipes will carry prominent “Do Not Flush” labeling on packaging.

“INDA has championed this legislation for the past two years and we are encouraged to see it pass out of the House. We extend our thanks to the bill sponsors, our industry and wastewater partners, and INDA members as we take another step forward to make “Do Not Flush” labeling nationwide,” said Wes Fisher, Director of Government Affairs.

The WIPPES Act lead sponsors in the House are Representative Lisa McClain (R-MI) and Representative Mary Peltola (D-AK) and the bill was introduced in the Senate by Senator Jeff Merkley (D-OR) and Senator Susan Collins (R-ME).

More information:
INDA U.S. textile industry USA wipes
Source:

INDA, the Association of the Nonwoven Fabrics Industry

EURATEX elects new President (c) EURATEX
From the left: Ismail Kolunsag, Barbara Cimmino, Mario Jorge Machado and Grégory Marchant.
17.06.2024

EURATEX elects new President

Portuguese textile entrepreneur, Mario Jorge Machado, has been elected President of EURATEX during its General Assembly on 14 June. The Assembly also nominated Alberto Paccanelli as Honorary President.

Mario Jorge Machado has an extensive career in textiles. Mario is currently a shareholder and director of "Adalberto Textile Solutions, S.A.", where he applies advanced management practices to boost competitiveness and innovation. He has been president of the Textile and Clothing Association of Portugal (ATP) since 2019, and he stands out for his strategic leadership in the textile and clothing sector, promoting innovation and sustainability. He represents ATP on the Board of CIP - Confederação Empresarial de Portugal and chairs CIP's strategic council for the environment and sustainability.

With a degree in Production Polymer Engineering from the University of Minho, his expertise ranges from continuous process improvement to the development of B2B commercial teams and B2C business models. His vision encompasses operational excellence and the implementation of sustainable practices, contributing to the evolution of the textile industry.

Portuguese textile entrepreneur, Mario Jorge Machado, has been elected President of EURATEX during its General Assembly on 14 June. The Assembly also nominated Alberto Paccanelli as Honorary President.

Mario Jorge Machado has an extensive career in textiles. Mario is currently a shareholder and director of "Adalberto Textile Solutions, S.A.", where he applies advanced management practices to boost competitiveness and innovation. He has been president of the Textile and Clothing Association of Portugal (ATP) since 2019, and he stands out for his strategic leadership in the textile and clothing sector, promoting innovation and sustainability. He represents ATP on the Board of CIP - Confederação Empresarial de Portugal and chairs CIP's strategic council for the environment and sustainability.

With a degree in Production Polymer Engineering from the University of Minho, his expertise ranges from continuous process improvement to the development of B2B commercial teams and B2C business models. His vision encompasses operational excellence and the implementation of sustainable practices, contributing to the evolution of the textile industry.

The Assembly also nominated Alberto Paccanelli as Honorary President, recognising over a decade of commitment to EURATEX and the European textile industry.

EURATEX General Assembly also elected 4 other members of the Presidency Team: Michael Kamm (ZWILLING Gruppe, Germany), Barbara Cimmino (Yamamay, Italy), Grégory Marchant (UTT, France) and Ismail Kolunsag (Cross Tekstil, Turkey). During the Assembly, EURATEX also welcomed new memberships from CEMATEX and Forschungskuratorium Textil e. V., and a partnership with Reju. (France).

More information:
Euratex President general assembly
Source:

EURATEX

07.06.2024

Stratasys: Expanded Materials and Technology Updates

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

New VICTREX AM 200 material for FDM
A new material offering that opens the application potential for demanding industries like aerospace and medical, where material properties are critical components of a 3D-printed solutions. This new high-performance, high-strength, validated material, VICTREX AM™ 200, will be available for the Fortus 450mc and the F900. VICTREX AM 200 is a PEEK-based polymer that is temperature, corrosion, and chemical resistant, with excellent mechanical properties which can be utilized with soluble and breakaway support material.

Carbon Fiber Visual Print Option for the F-Series
Carbon Fiber Visual Print Option is a new 5-slice (0.005”) layer height across the F-123 Series™ line of printers that is coming later this month for FDM®ABS-CF10. It produces a smoother surface finish, to provide the perfect finish when a part’s visual appearance is important to the application. It is built for applications that demand the durability of a carbon-filled polymer, but also requires a visually appealing result without additional post-processing.

F770 adds New Colors
The F770® printer can now print in multiple colors, in addition to its original single ivory color. Six new ASA colors, including red, white, light gray, black, blue, and yellow, will allow for more application versatility with FDM® ASA and ABS-M30 tried-and-true engineering plastics. The new colors enable printing without painting or other post-production marking, allowing parts to be available much faster, increasing productivity.

Somos NeXt Validated for SLA
Somos® NeXt™ is now a validated material for Stratasys NEO® stereolithography 3D printers. Somos NeXt is a resin with superior strength and can be used in automotive and consumer products, along with other applications, including prototyping, to produce durable, accurate and detailed parts.

New GrabCAD Software Print Integration Enhances On-Demand 3D Printing Capabilities
Stratasys has introduced Parts on Demand by GrabCAD, a new integration that synchronizes the company's software platform with Stratasys Direct. This addition allows GrabCAD Print™ customers to access Stratasys Direct’s fleet of 3D printers, allowing for larger and more intricate designs, a selection of more than 50 engineered materials, and the assurance of stringent quality inspections.

Source:

Stratasys Ltd.

Schneider Group launches brand: Authentico® by Schneider Group (c) Schneider Group
06.06.2024

Schneider Group launches brand: Authentico® by Schneider Group

The Schneider Group officially launches Authentico® by Schneider Group, a brand that stands for a transparent, verified, traceable, ethical and high-quality wool supply chain. It aims to be recognised as a global brand that enables the fashion industry, together with end-consumers, to choose new levels of premium quality comprising fully traceable and responsible wool, in compliance with a carefully structured approach that verifies, traces and brands the sourcing and manufacturing processes throughout the whole supply chain. Authentico® is based on the Schneider Group global certified network.

To achieve these goals, the Schneider Group has created the Authentico® Verification System, a simple and reliable way to provide criteria and guidelines for all Authentico® supply chain partners including:

The Schneider Group officially launches Authentico® by Schneider Group, a brand that stands for a transparent, verified, traceable, ethical and high-quality wool supply chain. It aims to be recognised as a global brand that enables the fashion industry, together with end-consumers, to choose new levels of premium quality comprising fully traceable and responsible wool, in compliance with a carefully structured approach that verifies, traces and brands the sourcing and manufacturing processes throughout the whole supply chain. Authentico® is based on the Schneider Group global certified network.

To achieve these goals, the Schneider Group has created the Authentico® Verification System, a simple and reliable way to provide criteria and guidelines for all Authentico® supply chain partners including:

  • Authentico® Integrity Scheme, best practices for growers’ implementation at farm level. Animal welfare is at the heart of the Authentico® Integrity scheme, together with being mulesing-free, in accordance with The Five Domains. But the scheme goes further and encompasses also land and pasture management and social responsibility. The wool is sourced from carefully selected and highly committed growers, who apply best practices and choose to subscribe to the dedicated Authentico® platform. The selected fibres are processed into tops in the Schneider Group’s own mills located on several continents, which are directly operated and fully certified.
  • Authentico® Brand Guidelines, for all other supply chain players (from spinners, weavers and knitters to garment makers, brands and retailers), that include precise criteria set by the Schneider Group to ensure alignment with Authentico® brand values.

In addition, the Schneider Group incorporates the traceability platform TextileGenesis™ within its Authentico® Verification System, to digitally track all incoming and outgoing wool.

The group has developed a marketing & communication plan to support its Authentico® brand. Upcoming events where Authentico® will be featured are: Pitti Filati in June, Milano Unica in July, the Natural Fibre Connect (NFC) in Biella in mid-September and the Textile Exchange Conference at the end of October in Pasadena.

Source:

Schneider Group / C.L.A.S.S. Eco Hub

05.06.2024

PVH: Search for new European Leader

PVH Corp. announced that Martijn Hagman, CEO of Tommy Hilfiger Global and PVH Europe, will be leaving the Company. He will serve in an advisory capacity to facilitate a smooth transition.

Lea Rytz Goldman, Tommy Hilfiger Global President, leads the global brand, reporting directly to PVH CEO Stefan Larsson. David Savman, PVH’s Chief Supply Chain Officer, will serve as Interim CEO for PVH Europe. The Company has launched a search for a new European leader.

PVH Corp. announced that Martijn Hagman, CEO of Tommy Hilfiger Global and PVH Europe, will be leaving the Company. He will serve in an advisory capacity to facilitate a smooth transition.

Lea Rytz Goldman, Tommy Hilfiger Global President, leads the global brand, reporting directly to PVH CEO Stefan Larsson. David Savman, PVH’s Chief Supply Chain Officer, will serve as Interim CEO for PVH Europe. The Company has launched a search for a new European leader.

More information:
PVH Europe TOMMY HILFIGER CEO
Source:

PVH Corp.

03.06.2024

LYCRA joins Panel at UN Fashion and Lifestyle Network Annual Meeting

The LYCRA Company, a global leader in developing innovative and sustainable fiber and technology solutions for the apparel and personal care industries, is a 2024 thought leadership partner of the United Nations Fashion and Lifestyle Network and will be participating in the third annual meeting on June 3 at the United Nations (UN) Headquarters in New York City.

Jean Hegedus, The LYCRA Company’s sustainability director, will be joining the panel discussion on “Elevating Fashion: Sustainable Practices and Strategic Insights in the Apparel Industry.” She will highlight The LYCRA Company’s collaboration with Qore® to use its QIRA® product to potentially help reduce the carbon footprint of LYCRA® fiber by up to 44 percent.*

Available in early 2025, patented bio-derived LYCRA® fiber made with QIRA® will consist of 70 percent renewable content derived from dent corn. This renewable spandex will be the first available on a large scale and it will deliver equivalent performance to traditional LYCRA® fiber without requiring re-engineering of processes, garment patterns or fabrics.

The LYCRA Company, a global leader in developing innovative and sustainable fiber and technology solutions for the apparel and personal care industries, is a 2024 thought leadership partner of the United Nations Fashion and Lifestyle Network and will be participating in the third annual meeting on June 3 at the United Nations (UN) Headquarters in New York City.

Jean Hegedus, The LYCRA Company’s sustainability director, will be joining the panel discussion on “Elevating Fashion: Sustainable Practices and Strategic Insights in the Apparel Industry.” She will highlight The LYCRA Company’s collaboration with Qore® to use its QIRA® product to potentially help reduce the carbon footprint of LYCRA® fiber by up to 44 percent.*

Available in early 2025, patented bio-derived LYCRA® fiber made with QIRA® will consist of 70 percent renewable content derived from dent corn. This renewable spandex will be the first available on a large scale and it will deliver equivalent performance to traditional LYCRA® fiber without requiring re-engineering of processes, garment patterns or fabrics.

This annual meeting brings together media, industry stakeholders, governments, and UN entities to advance knowledge, promote collaboration and enable action to meet Sustainable Development Goals (SDGs) in the fashion and lifestyle sectors.

The United Nations Fashion and Lifestyle Network is led by the United Nations Office for Partnerships and the Fashion Impact Fund. The Network stands as a catalyst for sustainable development within the fashion and lifestyle sectors.

*Estimate from Cradle-to-Gate Screening LCA for a representative LYCRA® fiber manufacturing facility, June 2022, prepared by Ramboll Americas Engineering Solutions, Inc.

Source:

The LYCRA Company

31.05.2024

Oerlikon Barmag: Pumps with magnetic coupling

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

GM pump
Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfils the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR moulded parts, block foam, refrigeration unit insulation or sandwich panels.  

GA series
Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series especially for the demanding conveying of high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customised solutions for process engineering processes where highly accurate and uniform metering is required.

The drum pump
The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronised so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

Source:

Oerlikon Textile GmbH & Co. KG,

Completion of Mosque for workers of Fashion Forum Limited (c) Asif Salman
31.05.2024

Completion of Mosque for workers of Fashion Forum Limited

The Zebun Nessa Mosque, recently completed in Ashulia, Dhaka, is a shining example of the progressive initiatives being undertaken by the Bangladeshi garment industry. Fashion Forum Ltd., a company of IDS Group, spearheaded this project, demonstrating a strong commitment to enhancing the welfare and environment for its workers.

Bangladesh, renowned as the second-largest exporter of ready-made garments globally, is setting new benchmarks in workplace safety, worker welfare, and environmental sustainability. Mr. Idris Shakur, managing director of IDS Group, epitomizes the industry’s progressive outlook. He has dedicated the mosque to the workers of Fashion Forum Limited, naming it in honour of his late mother. The gesture is designed to foster compassion and unity within the industrial community.

The Zebun Nessa Mosque, recently completed in Ashulia, Dhaka, is a shining example of the progressive initiatives being undertaken by the Bangladeshi garment industry. Fashion Forum Ltd., a company of IDS Group, spearheaded this project, demonstrating a strong commitment to enhancing the welfare and environment for its workers.

Bangladesh, renowned as the second-largest exporter of ready-made garments globally, is setting new benchmarks in workplace safety, worker welfare, and environmental sustainability. Mr. Idris Shakur, managing director of IDS Group, epitomizes the industry’s progressive outlook. He has dedicated the mosque to the workers of Fashion Forum Limited, naming it in honour of his late mother. The gesture is designed to foster compassion and unity within the industrial community.

The mosque, designed by Studio Morphogenesis and completed in 2023, reflects a forward-thinking architectural philosophy. Sustainability was a core consideration, with the design incorporating recycled red bricks from demolished houses for the exterior walls. Pink concrete, weatherproofed with lime plaster mixed with red brick powder, blends tradition with modernity, creating a spiritual and communal haven for the workers.

A key feature of the mosque is its majestic arched opening facing the qibla, offering worshippers a serene view of the adjacent waterbody and enhancing their connection with nature. The structure's double-layered walls provide thermal comfort and facilitate natural light and ventilation, transforming the mosque into a "breathing pavilion." Enclosed gardens, reminiscent of light courts, provide a peaceful retreat from the bustling industrial environment.

Inside, an intricate perforated metal stairway leads to a crescent-shaped upper floor, dedicated exclusively to the female workers. This space serves as a serene meeting area and prayer room, empowering women and reinforcing their importance within the workforce.

The Zebun Nessa Mosque also showcases advanced construction technology, designed to withstand extreme weather conditions, further underscoring the innovative and resilient spirit of Bangladeshi garment manufacturers.

This mosque stands as a testament to the progressive and compassionate ethos driving Bangladesh’s garment industry. It highlights how manufacturers are not only focusing on economic growth but also prioritising the well-being and empowerment of workers, setting new standards for the industry worldwide.

Source:

Bangladesh Apparel Exchange

29.05.2024

Solvay: Outcome of 2024 Shareholders’ Meeting

Solvay held its Ordinary General Shareholders’ Meeting in Brussels, and shareholders voted in favor of all the proposed resolutions.

Solvay shareholders showed support to all resolutions and more specifically:

  • The payment of a gross dividend of €2.43 per share for the year 2023. After deducting the interim dividend of €1.62 gross per share, paid on 17 January 2024, the balance amounts to €0.81 gross per share, payable from 5 June 2024.
  • The re-election of Ms. Aude Thibaut de Maisières as a board member for a four-year term.
  • The remuneration report.
  • The appointment of EY for the assurance of sustainability information related to the Corporate Sustainability Reporting Directive (CSRD)

Solvay held its Ordinary General Shareholders’ Meeting in Brussels, and shareholders voted in favor of all the proposed resolutions.

Solvay shareholders showed support to all resolutions and more specifically:

  • The payment of a gross dividend of €2.43 per share for the year 2023. After deducting the interim dividend of €1.62 gross per share, paid on 17 January 2024, the balance amounts to €0.81 gross per share, payable from 5 June 2024.
  • The re-election of Ms. Aude Thibaut de Maisières as a board member for a four-year term.
  • The remuneration report.
  • The appointment of EY for the assurance of sustainability information related to the Corporate Sustainability Reporting Directive (CSRD)
More information:
Solvay shareholders general meeting
Source:

Solvay

29.05.2024

Traceability New Front Line for Sustainable Retail

Multiple global regulations set to take effect in the coming years have made traceability an imperative for retailers and brands. These include the Digital Product Passport, the Corporate Sustainability Due Diligence Directive, and the New York Fashion Sustainability and Social Accountability Act, to name a few.

While companies are aware of the importance of traceability, research indicates that they are not prepared to comply with upcoming legislation. A recent KPMG survey highlighted that 43% of executives at major enterprises had no visibility or were “largely unclear” about the performance of their Tier 1 suppliers. At the same time, only 28% of companies had clear visibility into Tier 2 suppliers.

TradeBeyond’s recently published Supply Chain Traceability Guide, the latest installment of its Retail Sourcing Report series, highlights the myriad challenges that companies face in implementing effective traceability programs. This report is relevant for all industries, and is especially topical for the apparel and footwear sectors, which are under increasing scrutiny to enhance traceability to ensure sustainability.

Multiple global regulations set to take effect in the coming years have made traceability an imperative for retailers and brands. These include the Digital Product Passport, the Corporate Sustainability Due Diligence Directive, and the New York Fashion Sustainability and Social Accountability Act, to name a few.

While companies are aware of the importance of traceability, research indicates that they are not prepared to comply with upcoming legislation. A recent KPMG survey highlighted that 43% of executives at major enterprises had no visibility or were “largely unclear” about the performance of their Tier 1 suppliers. At the same time, only 28% of companies had clear visibility into Tier 2 suppliers.

TradeBeyond’s recently published Supply Chain Traceability Guide, the latest installment of its Retail Sourcing Report series, highlights the myriad challenges that companies face in implementing effective traceability programs. This report is relevant for all industries, and is especially topical for the apparel and footwear sectors, which are under increasing scrutiny to enhance traceability to ensure sustainability.

The report highlights retail’s slow progress in achieving transparency, as evidenced by the Fashion Transparency Index, which found that the average transparency score across 250 of the world’s largest brands and retailers was just 23%. That suggests that progress on transparent disclosure of social and environmental data is still lagging.
 
The report shows that brands fall short on most key measures of sustainability and traceability, including publishing a responsible code of conduct and providing visibility into their Scope 3 carbon footprint. The United Nations Economics Commission found that only a third of the top one hundred global clothing companies track their own supply chains. One of the obstacles is complexity. More than two-thirds (69%) of fashion companies report that complexity of their global business networks is an obstacle to visibility.

In addition to a lack of visibility, false sustainability claims are also rampant. Greenpeace found that in the apparel and footwear sector, 39% of sustainability claims are false or deceptive. Lack of third-party verification of ESG measures is also rampant.

The highest scoring brands in the 2023 Fashion Transparency Index included luxury brands such as Gucci and retailers such Target Australia, Kmart Australia, OVS, and Benetton. These companies back up their commitment with solid action on multiple measures of traceability.

Along with legislative requirements, consumers are a key driving force pushing companies to improve their traceability initiatives. McKinsey research found that 66% of consumers consider transparency to be a key factor when making a purchase decision and 73% of consumers would pay more for products with transparency into production and sourcing.

The report also highlights key challenges to overcome in the journey to traceability, including effective communication between stakeholders, compliance with new regulations, technology barriers, and data complexity.

On the positive side, the industry is responding with sophisticated technology, including software systems that incorporate artificial intelligence and blockchain-enabled traceability, which provide the required visibility and compliance.

Traceable fiber technology, which allows for traceability from the material origin of a product until its end-life, provides the option of a “fiber-forward” rather than a “product backward” approach to achieving traceability.

Aside from the regulatory and consumer drivers, there is a strong business case for implementing traceability, which includes cost savings, operational efficiency, brand protection and reducing supply chain risk. As such, TradeBeyond expects a rapid evolution in traceability programs across industries, especially in those that lag in best-practices.

While there has been considerable progress in recent years toward accurately tracing the complete origins of products, much more needs to be done. Brands and retailers must intensify their efforts to stay compliant with escalating regulations and align with evolving consumer preferences.

Source:

TradeBeyond

24.05.2024

Polartec launches ‘Beyond Begins Today’ Series

Polartec, a Milliken & Company brand and the premium creator of innovative and more sustainable textile solutions, unveils the first of three short films which comprise the company’s multifaceted Beyond Begins Today campaign. Featuring Eva Karlsson (CEO, Houdini), Chris Parkes (Natural World Photographer), and Karen Beattie (Director of Product Management, Polartec), the first chapter explores our Planet and the intrinsic value of our natural world.

As a global initiative through which Polartec aims to raise awareness and unity around important universal themes including sustainability, diversity and positive change, Beyond Begins Today leverages static and multimedia content published on multiple touchpoints and channels throughout the year. Chapter 1: the Planet, is the first of three chapters with the second and third chapters dedicated to Product and People respectively.

Polartec, a Milliken & Company brand and the premium creator of innovative and more sustainable textile solutions, unveils the first of three short films which comprise the company’s multifaceted Beyond Begins Today campaign. Featuring Eva Karlsson (CEO, Houdini), Chris Parkes (Natural World Photographer), and Karen Beattie (Director of Product Management, Polartec), the first chapter explores our Planet and the intrinsic value of our natural world.

As a global initiative through which Polartec aims to raise awareness and unity around important universal themes including sustainability, diversity and positive change, Beyond Begins Today leverages static and multimedia content published on multiple touchpoints and channels throughout the year. Chapter 1: the Planet, is the first of three chapters with the second and third chapters dedicated to Product and People respectively.

More information:
Polartec Beyond Begins Today Films
Source:

Polartec