From the Sector

The Global Fashion Summit was hosted by Global Fashion Agenda (GFA) in Copenhagen on 7-8 June. The event was centred around the theme ‘Alliances for a New Era’ and convened over 900 leaders from brands, retailers, NGOs, policy, manufacturers, and innovators to drive urgent action.

Attendees heard from 112 speakers including HRH The Crown Princess of Denmark; Marie-Claire Daveu, Chief Sustainability & institutional Affairs Officer, Kering; Leo Rongone, CEO, Bottega Veneta; Thierry Andretta, CEO, Mulberry; Lily Cole, Author & Podcaster on climate solutions and Advisor for UNECE; Nicolaj Reffstrup, Founder, GANNI; Maximillian Bittner, CEO, Vestiaire Collective; Paul Polmon, Co-Author, Net Positive; Bobby Kolade, Fashion Designer; Halide Alagöz, Chief Product Officer, Ralph Lauren Corporation; Aditi Mayer, Sustainable fashion blogger and labor rights activist; Lindita Xhaferi Salihu, Fashion Charter Lead, UNFCCC; and more.

Multiple companies, such as GFA, Ralph Lauren, Apparel Impact Institute, Fashion Revolution, GANNI, TrusTrace and Mulberry, chose to announce their latest sustainability measures at the landmark event.

Innovation Forum connected fashion companies with sustainable solution providers
This year’s Summit also presented an Innovation Forum, enabling small and large companies to meet with 24 sustainable solution providers – equipping them with the tools to turn words into meaningful actions. More than 300 facilitated business meetings between fashion companies and sustainable solution providers took place during the two days of the Summit.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

Collaboration enables recycling
After two years of research, product development, and most important, building partnerships in the value chain, TEXAID has been able to develop a fabric made of 100 % recycled fiber in close collaboration with our value chain partners.

The fabric is a blend of 50 % post-consumer textile waste that TEXAID has collected in Germany and Switzerland. White cotton textiles which cannot be worn, have been sorted out in a sorting facility in Apolda, Germany. The other 50% is made from ocean-bound plastic waste which is plastic with a high risk of entering the ocean which has been saved and recycled by Unifi. The fabric and bag have been produced in Italy. The cotton material has been shredded by Marchi & Fildi in Biella, IT, who then spun the recycled cotton and recycled polyester fibers into a yarn. This yarn has been woven into a fabric by Tessitura Casoni.T.F.C.

Through this proof of concept, it has been showcased that making fabrics of 100 % recycled content and with 50 % of post-consumer textiles is possible. TEXAID is looking for strong industry partners to push high-value textile to textile recycling technologies in joint projects like these.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

SHIMA SEIKI MFG. will participate in the ITM 2022 International Textile Machinery Exhibition in Istanbul, Turkey.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in Turkey and other international markets. Featured is the flagship MACH2XS WHOLEGARMENT® knitting machine with original SlideNeedle™ on four needle beds and spring-loaded moveable sinkers with expanded patterning capability, the MACH2VS V-bed machine for producing WHOLEGARMENT® items using every other needle, as well as the compact SWG091N2 for producing smaller WHOLEGARMENT® items and accessories. A brand new proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR183 machine. N.SVR123SP features a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. N.SVR123SP at ITM will feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. Meanwhile N.SSR112 offers industry-leading technology in an economical yet reliable package made in Japan. Also on display is the SFG20 glove knitting machine.

Demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system. At the core of the company’s “Total Fashion System” concept, SDS®-ONE APEX4 provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the design evaluation process with its ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. The same capability is present in APEXFiz™ subscription-based design software. Installed on personal computers, APEXFiz™ features the same functionality as SDS®-ONE APEX4, but with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz™ help to digitally transform the fashion supply chain for realizing sustainable manufacturing. APEXFiz™ will be shown along with SHIMA SEIKI’s yarnbank™ digital yarn web platform that further enhances the realism of virtual samples.

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Eccentric screw pumps – robust all-rounders convey any medium
The requirements for pumps are considerable, as the demand for customized solutions for increasingly complex processes is rising. This is particularly true for Oerlikon Barmag’s new eccentric screw pump range. High wear-resistance, increased durability and robust operation – the new pump is tailor-made for conveying highly-filled, high-viscosity and abrasive media, such as filled adhesives, filled silicones and filled casting compounds, for example. The is the multi-stage seal system, which considerably increases the pump’s lifespan. The upstream shaft sealing ring protects the slide ring seal against excessively-fast wear caused by challenging media. In turn, the optimum alignment of the drive shaft – ball bearing-supported and centrally-guided through the shaft sealing ring – prevents any metal debris caused by friction and hence ensures considerably greater durability. Producers benefit from considerably greater productivity, as the pumps’ maintenance intervals and hence machine downtimes are significantly reduced.

New pump for shear-sensitive materials
For increasingly complex customer-specific process solutions, Oerlikon Barmag is now expanding its GA series, developed especially for the challenging conveying of high-viscosity media, to include the GAB51F for shear-sensitive conveying media. The newly-developed pump with its viscosity range of max. 300 Pas is tailored to conveying high-viscosity, shear-sensitive materials such as adhesives and silicones, for example. “The shear forces impacting the medium within the pump are reduced to a minimum as a result of a specially geometry”, explains Thorsten Wagener, Senior Sales Manager within the Pump Construction business unit. The material is conveyed through the pump in an as gentle and low-pulsation manner as possible and metered precisely at the outlet – ensuring it retains its characteristic properties.

High-speed metering pump with sealed product space
The high-speed metering pump has been especially developed for metering poorly-lubricating media. Here, the main benefit is the sealed product space, which extends the pump’s lifespan considerably. The space that comes into contact with the media is limited to the area around the gears. “As a result, the high-speed pump is particularly suited for applications in the chemicals industry, which frequently involve aggressive acids”, comments Thorsten Wagener.

GM series for low-viscosity media
The pumps in the GM and GA series provide precision metering with low-pulsation feeding of the conveying medium. The multi-stage GM pump conveys low-viscosity media (i.e. 250 bar, 100 mPas) even under high pressure and in the most challenging conditions. The square design from the proven GM series is the standard pump for many metering tasks. The development of the multi-stage pump expands the applications range for the GM series considerably. The round 2-stage GM pump has been developed especially for use in high-pressure technology. It masters the particular challenge of conveying small throughputs with low viscosities. The pump is perfect for 0.05 through 20 cm³/rev feed sizes and is excellently suited for use in high-pressure machines for PUR molded parts, foam slab stock, refrigeration unit insulations and sandwich panels, for example.

GA series pumps for high-viscosity media
The Oerlikon Barmag GA range has been especially developed for the challenging conveying of media with higher viscosities. The GA series pumps are available for conveying volumes of between 1.25 and -30 cm³/rev (0.6-144 l/h). They have been designed for pressures of up to 200 bar, for viscosities of up to 1.500 Pas as well as for temperatures of up to max. 225 °C. With this range of pumps, Oerlikon Barmag offers its customers tailor-made solutions for many technical processes in which high-precision and even metering is of paramount importance.

The drum pump – conveying and metering using a single unit
With the drum pump, the Oerlikon Barmag pump specialists have created a pump designed specifically for conveying and metering high-viscosity materials such as adhesives, silicones and other high-viscosity materials from drums and other large containers and for pressures of up to 250 bar. Its special features not only include the fact that it removes high-viscosity materials from the drum, but that it also meters the medium directly without any additional interim stops.

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

“The remarkable outcome of TOS+H EXPO 2022 is clearly asserting its significance as the leading trade fair for the industry, in Turkey,” says Petra Cullmann, Executive Director at Messe Düsseldorf. “Our new partner, the Istanbul Chamber of Industries, paved the way for a high-caliber symposium with inspiring insights and intensive discussions, and our exhibitors again proved their expertise with a comprehensive overview of innovative products, equipment and services at the trade fair. We are proud to be sending clear signals in the market. We're giving a lead, both in Turkey and beyond, on the element that matters most: the individual.”

TOS+H Expo 2022 and the Occupational Health and Safety Symposium organized by the Istanbul Chamber of Industry were officially opened on May 14, 2022 by Ms. Petra Cullman, Executive Director Messe Düsseldorf and Sadık Ayhan SARUHAN, ICI Vice President. The new partnership with the Chamber of Industry will ensure the quality of the event and also strengthen the leading position of TOS+H Expo in Turkey.

“The Occupational Health and Safety Symposium, which we organized simultaneously with the 4th TOS+H Expo - Turkish Occupational Safety + Health Exhibition, was concluded with the presentations of 84 speakers in 22 sessions. Our symposium included highly interesting presentations on the environment, sustainability and labor law and was met with great interest by all parties and especially by representatives from all industrial sectors which deal with the topic of occupational safety and health at work. As ICI, we will continue to work to improve OHS processes in the next period”, said a spokesperson for the Istanbul Chamber of Industry.

Baldwin Technology Company Inc. has announced the installation of its TexCoat G4 finishing system at Graniteville Specialty Fabrics, a recognized leader in the production of specialty coatings and coated fabrics. With Baldwin’s cost-efficient and highly sustainable spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.

Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets, and others. The company excels in developing and sourcing custom coatings, and creating specialized technical solutions to meet specific, and often unique, end-user requirements. The installation of Baldwin’s TexCoat G4 is part of a major facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. This system utilizes non-contact precision-spray technology, ensuring precise finishing coverage with the exact amount of chemistry for reaching the optimal performance of the fabric. Changeovers (pad bath emptying, cleaning and refilling) are significantly reduced, resulting in substantial chemical conservation and increased productivity.

From 7 - 9 July, the who's who of the fashion industry and the entire fashion ecosystem will finally meet again in person at the events of the Premium Group at Messe Berlin! For business and exchange, for new experiences and impulses, for new brands and above all for one thing: for a new togetherness!

As usual, the trade shows PREMIUM and SEEK as well as the conference format FASHIONTECH are reserved for business professionals - who can find inspiration on site entirely. With the new D2C festival ‘The Ground – Celebration of Style & Culture’, young consumers and fashion enthusiasts from GenZ and GenY as well as the international community living in Berlin are invited to the exhibition grounds for the first time.

More than fashion: 360-degree inspiration at The Ground Festival
At The Ground, industry professionals meet young enthusiasts to inspire each other and discover new worlds. The Ground presents a completely new mix of topics, brands and partners around beauty, music, sport, play, soul and talks. Fashion is the connecting element of The Ground and runs through all areas. Creative and interactive brand presentations meet pre-loved and vintage store pop-ups, inspiring panel talks, sports and mental health workshops and live performances.

In the name of peace and unity: The Ground Festival opened by #FashionUnites Parade
On 7 July, the first The Ground Festival will open with a colourful parade through the capital. Together with the PLATTE.Berlin community, The Ground is organising a parade under the motto #FashionUnites starting at noon from the Victory Column through the west to the festival location of the Berlin exhibition centre. Accompanied by a Berlin DJ, everyone is invited to take part in the parade and can register here and thus also receive free access to The Ground on the first day of the festival.

High-profile charity campaign: The Ground launches 'MUST-HAVE PEACE Merch Collection'
Due to the ongoing war situation in Ukraine, the makers behind The Ground have launched a charity campaign: the MUST-HAVE PEACE Merch Collection. In this exclusive collaboration, players and brands such as Closed, Drykorn, Eastpak, Lala Berlin, Lee and others design one piece of merch each (denim jackets, shirts, shorts, bags) that can be bought during The Ground Festival.

New hub for sustainability: the SEEK Conscious Club
SEEK has always been a magnet for brands and people who have a common vision, tackle things and get them on the road. With the new SEEK Conscious Club, there will be a separate exhibition area focusing on sustainability - more than 80 sustainable brands are joining the club already.

New brand worlds at PREMIUM
This July, PREMIUM will be divided into three sections for the first time: High, Icon and Volume. High is the new home for brands that operate in the market above the premium segment. These include Lala Berlin, Nove, Helene Galwas and Jane Kønig. Icon covers the classic premium segment from Strellson and Seidensticker to Mos Mosh and Denham to Young Poets Society and Fabienne Chapot, and Volume is the new area for commercially successful brands that approach premium from the middle of the market. Here you will find brands like Gerry Weber, Mexx, Pierre Cardin or Miracle of Denim.

The Content Stage program
The stage program will reflect all relevant topics of the fashion ecosystem as part of the new Premium Group cosmos.

• It starts on the first day of the fair, Thursday 7 July, with the popular FASHIONTECH conference.
• On 8 July, the SEEK Conscious Club will host an extensive stage program on the subject of sustainability in all its facets for the first time.
• On Saturday, 9 July, the stage will become the entertainment spotlight for The Ground visitors.

A boundary-pushing approach to hacking carbon reduction challenges has been established by AkzoNobel and partners from across the extended value chain following the company’s first ever global Collaborative Sustainability Challenge.

During 24 hours of intense discussion at the pioneering event a series of high impact exploration teams was set up. Those involved will now continue to work together in a determined effort to collectively accelerate the reduction of carbon emissions in the paints and coatings industry.

The participants – represented by senior and next generation leaders – hacked four key areas: energy transition, process efficiency, solvent emissions and circular solutions. It resulted in 27 partners signing up, including suppliers, customers and end-users, as well as representatives from finance, government, service providers and consultancies.

AkzoNobel has set science-based sustainability targets to halve its carbon emissions across the full value chain by 2030. Achieving that ambition will rely heavily on collaborating with partners and challenging each other to find innovative ways to overcome the unprecedented challenges everyone faces.

The Italian company presented its newest innovations and synergies, among the introduction of SMART O3, a new Ozone Booster improving the bleaching on indigo, and the educational experience Circular Explorations: Recipe for Change, in collaboration with Adriana Galijasevic’s Cocircular Lab at Denim Première Vision.

The Trustainable™ collection FW 23 presents the SMART 03
For Officina39, “Trustainable” is a term that expresses the company’s approach based on honesty, transparency and social responsibility: this attitude once again characterizes the technologies that have given shape to the Trustainable™ collection FW 23.

The latest technological addition to the line is represented by the new Ozone Booster SMART 03,
which assures more final bluish indigo shades, activating the reaction of Ozone on indigo without any strong oxidizing agent. Better results, less aggressive bleaching.

Less water, plus sustainability, empowered result
The new collection also marks the debut of Aqualess Fade, a technology that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which reduces resource consumption and environmental impact. This newest innovation completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use.

Officina39 and Adriana Galijasevic join forces
Circular Explorations: Recipe for Change is the collaborative and educational project developed by Officina39 and Adriana Galijasevic’s Cocircular Lab, showcasing the use of waste as a resource and prolonging the life of the garment through color. Several brands (C.P. Company, Tommy for Life/PVH Corp., Organic Basics, Asics, Lenzing and Camo) donated overstock garments as well as second-grade production or damaged, unsold pieces to be updated with newly developed applications made with Officina39’s Recycrom™, patented dyestuffs range made from textile waste.