From the Sector

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner holds a doctorate in mechanical engineering, specializing in process engineering and business development. Since 2006, he has held various roles at Fraunhofer UMSICHT, most recently heading up the Products division and overseeing its 126 employees and its budget of 14.8 million euros. He has set international standards through his award-winning research into a free of water tanning leather tanning process that uses compressed carbon dioxide. With the development of innovative aerogel-based insulation materials for building facades, he has made a significant contribution to environmentally friendly, circular applications in the construction industry and initiated a number of industrial projects. One of the notable technological breakthroughs made by his team was the development of a new type of fire-resistant glass, which can withstand even the most extreme heat. This won his development team the Joseph von Fraunhofer Prize in October 2020.

Alongside becoming institute director, Prof. Renner will also take over the leadership of the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in August 2022. In this role, he will represent the Fraunhofer-Gesellschaft on a national and international level with regard to the transformation of industry and society to a circular economy. In addition, he will start his professorship in Responsible Process Engineering at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. Over the course of his professorship, he will shape the systemic development of the circular economy at a corporate, regional and European level.

Prof. Christian Doetsch has worked in energy research for more than 25 years, spending most of this time at Fraunhofer UMSICHT. As head of the Energy division, he managed a team of around 145 employees and was responsible for a budget of approximately 10.4 million euros. His technological focal points are energy storage, Power-to-X technologies including hydrogen electrolysis and chemical conversion, catalysts, and energy system modeling and optimization. His overarching aim is the integration of renewable energies into a cross-sectoral, resilient energy system.

In 2015, Doetsch co-founded the award-winning start-up Volterion GmbH & Co. KG, which develops redox flow batteries. He attained high visibility on a global scale by redesigning stacks, one of the main components of redox flow batteries, an achievement for which he, his team and Volterion representatives were awarded the Joseph von Fraunhofer Prize in May 2021. The energy expert also acts as deputy spokesperson for the Fraunhofer Energy Alliance and task manager for the energy storage group at the International Energy Agency (IEA). He also co-founded the “Open District Hub e. V.,” an association that promotes the energy transition in the sector by means of energy systems integration.

Since January 2020, he has been Professor of Cross Energy Systems at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. In this role, he conducts research into ecological evaluation and resilience of cross-sectoral energy systems.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

The worldwide leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS), seeks public input as it begins the revision process for GOTS standard version 7.0.

As a solution for sustainability-related challenges in textile processing, GOTS sets strict and binding requirements regarding ecological and social parameters. These are updated every three years in an open and transparent revision process which fosters constant progress towards the development of better textile processing methods. In this process of continuous improvement, GOTS collaborates with all relevant international stakeholders, including the textile and apparel industry, chemical suppliers, organic farming and environmental organisations, workers' rights groups and labour unions, to ensure ongoing relevance and account for changes in the industry.

The initial period of public input runs from 14 April through 12 June. During this phase, all interested parties, including industry representatives, NGO’s and consumers, are encouraged to participate by submitting comments, feedback, and ideas through GOTS’s online portal.

“We are looking forward to receiving input from stakeholders around the world for GOTS version 7.0. This open call for feedback is part of what keeps our certification requirements up-to-date with the most cutting-edge developments in the industry,” says GOTS Managing Director Rahul Bhajekar.

Beginning in 2022, the revision process will follow the newly developed Standard Setting Procedure, which provides for the constitution of a Standard Revision Committee (SRC) for each revision. This group will serve as the pivotal force behind decisions about the revisions. The SRC consists of experts from different stakeholder groups, including associations, organisations, companies and individuals. All input received by June 12 will be carefully considered by the SRC as well as compiled and made public for an additional 30-day consultation period later this year. All drafts of the standard will also be made public. GOTS standard version 7.0 will be finalised in early 2023, and will be available on the GOTS website.

The timeline for the revision to GOTS version 7.0 is as follows:

1. Constitution of GOTS SRC- April 2022
2. Release of first revision draft for public consultation - 14 April 2022
3. First public consultation period - 60 days (April 14 to June 12)
4. Deliberations by the SRC on input received - May to August 2022
5. Release of second revision draft for public consultation - September 2022
6. Second public consultation period - 30 days from release
7. Deliberations by the SRC on input received - October to November 2022
8. Finalisation of GOTS version 7.0 - February 2023
9. Release of GOTS version 7.0 - March 2023

At a time when global food security is becoming a rising concern for governments around the world, the International Fund for Agricultural Development (IFAD) today announced a call to its 177 Member States to nominate candidates for the Fund’s next President.
 
IFAD is a specialized United Nations agency and international financial institution focused on the alleviation of rural poverty and hunger.
 
The President is IFAD’s most senior position with responsibility for leading the organization and chairing its Executive Board. Nominations for President can only be made by IFAD Member States and must be received by the Secretary of IFAD no later than 6 May 2022.
 
The President will lead IFAD at a crucial time. Fears that rising food and fuel prices - worsened by the current conflict in Ukraine - could lead to a global food crisis are running high, with the world’s poorest rural people likely to be hardest hit. Small-scale producers are already reeling from the impacts of the COVID-19 pandemic, droughts, cyclones and other natural disasters. Their incomes are expected to be affected by the rising cost of inputs and disrupted markets. This is also likely to have devastating and long-term impacts on their nutrition and food security.
 
IFAD plays a crucial role in increasing the resilience of rural small-scale producers to shocks, and ensuring that they can continue to grow food and earn incomes. The Fund’s investments in climate adaptation and sustainable food systems are helping to achieve the Sustainable Development Goals to eradicate hunger and poverty.
 
Following the nomination process, the appointment of the next President will take place on 7 July 2022 during the first special session of the IFAD Governing Council. The Governing Council is IFAD's principle governing body with full decision-making powers.
 
The President of IFAD serves a four-year term, renewable once. The newly appointed President will take office on 1 October 2022.

Business of the automobile industry and its suppliers was impacted in 2021 by the worldwide shortage of semiconductors and the correspondingly restrained development of production volumes, which was about the same as the previous year. Autoneum’s revenue in local currencies declined slightly by 1.6% compared with the previous year. In Swiss francs, Group revenue decreased by 2.3% to CHF 1 700.4 million year-on-year. For 2021 as a whole, an EBIT margin of a little more than 3% and a free cash flow of around CHF 70 million are expected.

Owing to the global shortage of semiconductors, automobile production for 2021 as a whole increased by 2.5% to 76.4 million vehicles and was thus only slightly higher than the previous year’s level. Autoneum’s revenue in local currencies declined by 1.6% year-on-year. Although revenue developed better than the market in three of four regions, the Company lagged slightly behind the global market trend. On the one hand, this was due to the fact that some vehicle models of US manufacturers predominantly supplied by Autoneum were disproportionately affected by the shortage of semiconductors, and, on the other hand, due to the lower share of Business Group Asia in Autoneum’s total revenue. The consolidated revenue in Swiss francs fell by 2.3% to CHF 1 700.4 million compared to the previous year (2020: CHF 1 740.6 million).

Revenue development in the Europe, Asia and SAMEA regions well above market
Business Group Europe recorded a decline in revenue of 1.6% in local currencies and was thus well above the market trend, which saw production fall by 4.4%. By contrast, revenue for Business Group North America in local currencies dropped by 7.2% and was thus well below the market, which saw a small increase of 0.1%. The vehicle models of US customers predominantly supplied by Autoneum were disproportionately affected by the semiconductor shortage. Consequently, Autoneum lagged behind the market trend in this region. Asia was the market least impacted by the semiconductor shortage in financial year 2021. Accordingly, in 2021 Asian automobile production saw good growth of 5.1%. Business Group Asia once again exceeded the overall Asian market, with revenue growth of 6.7% in local currencies. Business Group SAMEA (South America, the Middle East and Africa) significantly exceeded the market trend in financial year 2021.

Although 8.6% more vehicles were produced in the region compared to the prior year, Business Group SAMEA’s revenue rose by an impressive 24.8% on an inflation- and currency-adjusted basis. This growth was largely supported by high-volume programs in Turkey and South Africa.

Thanks to better than expected revenue at the end of 2021, Autoneum is in the upper range of its guidance, which was adjusted in October. Based on provisional figures, Autoneum expects an EBIT margin of slightly more than 3% and a free cash flow of around CHF 70 million for 2021.

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

As a Sustainable Supply Chain Director, Travis has more than 20 years of experience advising fashion and apparel-related businesses on sustainable sourcing, product development and manufacturing in domestic and global markets. He earned his Bachelor of Arts (B.A.) in International Studies from Vassar College, his Juris Doctorate (J.D.) in Corporate Law from George Washington University Law School and his Master of Business Administration (MBA) in Global Sustainability and Finance from the Gabelli School of Business at Fordham University.  

IFFT/Interior Lifestyle Living has wrapped up three successful days of business at Tokyo Big Sight’s South Halls. From 18 – 20 October 2021, a total of 11,147 visitors found their way to the fairground. Assembling again for the first time since the pandemic began, 300 exhibitors from five different countries and regions welcomed visitors with an extensive and diverse selection of products in 10,390 sqm of gross exhibition space.

“As the place where designers set trends and decision makers meet, IFFT/Interior Lifestyle Living has once again proven to be the premier trade fair in Japan for the entire living space,” says Mr Yasushi Kajiwara, Managing Director of Messe Frankfurt Japan Ltd. “After last year’s fair was deferred due to the pandemic, we worked hard to present industry buyers with new impulses and ideas at this edition. This included an additional focus on up-and-coming designers at dedicated zones for new talent.”
 
Fresh talent and green living
With products for the entire living space assembled at the fairground, trade buyers were once again spoilt for choice, but a number of product zones in particular were worthy of special attention.
As a new initiative for 2021, the renowned Japanese architect Mr Keiji Ashizawa gathered prospective new interior designers and their products at the highly anticipated '+Talents' Zones.
 
To maximise connections, a series of fairground tours were also arranged to bring architects closer to the best new designers and their interior products for the Japanese market. A new 'Ethical' Zone was also introduced to spotlight green living, up-cycling, fair trade, and more.

With enthusiastic participant registration and continued strong growth projected in absorbent hygiene & personal care markets, excitement is building for the seventh edition of Hygienix as it returns as an in-person event just weeks away, Nov. 15-18, in Scottsdale, Arizona.

INDA reports that more than 300 participants have signed up to attend the conference with participation expected to approach pre-pandemic levels in the 500 range.

The Hygienix conference program will focus on compelling topics including New Options for a Responsible End-of-Life; Product and Process Innovation in Absorbent Hygiene Products (AHPs); Haptics: Four Approaches to Assessing Feel, and E-Hygiene Advancements; Absorbent Hygiene Products Market Stats, Trends and Policy Insights; Feminine Care: Challenges to the Status Quo; and New Approaches and Unmet Needs in Baby and Incontinence AHPs.

The conference will also feature two nonwovens workshops, a welcome reception and opportunities for 60 tabletop displays with receptions.

Hygienix Innovation Award Finalists
Among the conference highlights will be the selection of the Hygienix Innovation Award™. The three finalists are all tapping into key trends that are driving growth in this segment – innovation and sustainability – with products that promote health and a healthy environment.

Award finalists making presentations include:

• Expandable Core Wrap from Curt G. Joa, Inc. – Chris Nelson, Business Development Manager, will provide an overview of this new patent-pending expandable core wrap design that allows the core to expand within the containment wrap as the product is insulted, regardless of the blended fluff and Superabsorbent Polymer (SAP) ratio.    
• GlatPure™ Back Sheet from Glatfelter – Vishal Bansal, Ph.D., Vice President, Innovation, will share how this product differs from most back sheets in today’s market that are made from plastic film and nonwovens such as Polyethylene (PE).
• Kudos Diapers from Kudos – According to Kudos Founder & CEO Amrita Saigal, a typical baby spends over 22,000 hours in diapers before potty training, making the material that touches their skin matter. Kudos is the first and only disposable diaper where baby’s bottom touches 100 percent doctor-recommended, carbon-negative, sensitive-skin-friendly cotton all day versus fossil-fuel-derived plastic

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30^th, October 1^st and October 7^th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

On 21st October the Managing Director of Officina+39 Andrea Venier has joined a panel discussion in the prestigious arena of the Kingpins24 Digital Show. He contributed to the discussion with his and Officina+39’s point of view on “Water Conservation”, together with Emrah Özkorkmaz from Bregla and Taimur Malik from Stylers International, with Edward Hertzman from Sourcing Journal & Rivet as moderator.

Water crisis remains one of the top issues for humanity and 90% of the world's natural disasters are related to water. Officina+39 has been working hard to rethink the way water is used throughout the denim processes: Andrea's contribution emphasized the company’s practical and consolidated experience in this field, as in recent years their main objective has been to drastically reduce water use in line with UN SDG6.

Andrea pointed out how “fashion industry is still currently deeply rooted in a linear approach: make, use, dispose.” Accordingly to Andrea and Officina+39, the fashion world is becoming aware of this reality and is trying to reinvent itself in order to decrease the use of this precious resource and its negative impacts but there is still work to do in order to redesign a better sustainable model, where circularity should represent the new sustainability: circularity not only when it comes to the materials, but also to water.

In the textile industry water is used as the vehicle for colors and chemical auxiliaries but luckily today many technologies aim at significantly reducing water consumption. Officina+39 is really focused on this target: Andrea explained that “Officina+39 has developed the AQUALESS MISSION, a process suitable for conventional machines that leads to a 75% reduction of the water typically used in denim and garment laundry processes, using a waterless technology and saving costs for producers.”

Despite the start-up cost of investing in the development of sustainable technologies may discourage some in the industry, it is about time to realize that these actions cannot be delayed and that we will increasingly hear about water scarcity, water stress and water risk.

Andrea stated: “It is necessary to develop water management strategies and systems in any company: today there is ISO 14000 related to environmental management, but I believe that governments, brands and related organisations should think about an ISO related just to water management. In this way, every company can understand how much value can be generated in the medium-term and how much money could be saved by investing in this kind of technologies. To create new standards related to water management, we must change the approach.”