From the Sector

• Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

BEZAKTIV ONE dyes can be dyed, rinsed and soaped between 40 and 60 °C. Therefore, the BEZAKTIV ONE exhaust dyeing process is significantly shorter compared to conventional reactive dyeing processes, where temperatures between 60 and 98 °C are required. This advantage means savings in process time and higher productivity for the textile dyer.

The advantages become particularly clear when dyeing medium to dark shades with the BEZAKTIV ONE process. Due to the high fixation level in combination with good color build-up dark shades can be matched with lower dye concentrations of BEZAKTIV ONE than with conventional bifunctional reactive dyes. The addition of the auxiliary COTOBLANC SEL in the second soap bath has an additional positive effect, so that a washing process with low water and energy consumption generates excellent wet fastness properties on the textile.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

The ANDRITZ converting machine operating at Naturopera is highly flexible, taking just a few settings to switch to the production of bio-based diapers. It is designed for a multiple-size process, features an operator-friendly interface, and guarantees a production speed of 800 ppm.

Naturopera is a French company producing baby care, femcare and household products with a strong focus on local production and sustainability.

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

However, this uncertainty does not appear to affect the sector’s operators, who are nonetheless permeated by a sense of optimism, as is also testified by the positive data drawn from a comparison with orders from the previous quarter (October-December 2022), for which total orders had been slightly on the rise at +3%. Indeed, the president of ACIMIT confirms that, “Manufacturers in our sector don’t lack for work, having filled up on orders last year and are now busy fulfilling them. The forecasts for 2023 remain positive”. Zucchi concluded, “I expect this confirmation of a healthy manufacturing sector to come from ITMA Milan, the world’s premier trade show dedicated to textile and clothing technologies, slated to open on June 8th at the Rho Fiera exhibition spaces. The exhibit will feature over 400 Italian manufacturers, taking up approximately 30% of the entire exhibition space. This figure is in itself a result that confirms the leadership role of Italy’s textile machinery manufacturers”.

As a global provider of sustainable woodfibre products, Sappi will be showcasing its solutions for the garment industry under the theme “Fashion meets Forest” at ITMA 2023 – with sublimation papers and its dissolving wood pulp, used for the production of garment fibres under the “Verve” brand name.

How can the woodfibre industry support a more sustainable garments market? Sappi is eager to answer this question at the ITMA and has created a “knowledge trail” for visitors to explore under the motto “Fashion meets Forest”. Visitors to the stand can follow the journey from wood via cellulose and fibre to the finished yarn and the printed garment.

Sublimation papers: Expanded production capacity in Carmignano
Sappi’s Transjet sublimation papers stand for fast, uniform ink transfer and minimal ink consumption. As a premium supplier, Sappi is constantly striving to meet its customers’ needs. So, at this year’s ITMA, various sublimation papers with optimised qualitative properties will be on show.

Sappi maintains the high quality of its coated Transjet and uncoated Basejet sublimation papers by regularly investing in new, state-of-the-art technologies. At the end of April, a new warehouse has been inaugurated at the Carmignano mill in Italy. In the next month’s, Sappi will further invest in two new converting machines with a width of 1.9 meters and 3.2 meters as well as in a fully automated packaging line. All the investments will support the company’s vision of having a complete in-house solution for the sublimation industry, have a positive impact on CO2 emission, satisfy the increased demand of their customers as well as further improve lead times.
 
“Verve” dissolving wood pulp for high-quality textiles
Sappi will also be showcasing its dissolving pulp (DP) brand “Verve”. DP provides the feedstock raw material toward producing rayon fibres such as Lyocell and viscose and further into yarns and fabrics. Textiles produced from wood based cellulosic fibres are noted for their breathability, colour fastness, softness, drape, absorbency and biodegradability. In addition to the garment industry, dissolving pulp is also used in various household and pharmaceutical products.

• Umsatzplus von 27 Prozent bis zum Jahr 2030 möglich

Gardinen, innenliegender Sicht- und Sonnenschutz bilden einen Markt, der in Deutschland jährlich um rund 2 Prozent zulegt. Diese seit mehr als 15 Jahren geltende „Regel“ wurde 2020 mit einem Umsatzplus in Höhe von 5,3 Prozent durchbrochen. Der Corona-Schub fürs Zuhause hat auch die Nachfrage nach Verschönerungen und/oder Verhüllungen der Fenster beflügelt. Und wie in den meisten Living-Branchen flachte die Kauflust mit dem Rückgang der Pandemie ab. Zwar deutet der leichte Umsatzanstieg in 2022 die Normalisierung des Konsums an, doch das Mengenwachstum zog nicht im gleichen Maße an, so die Marktforscher von Marketmedia24, Köln, im aktuellen „Branchen-REPORT Gardinen, innenliegender Sicht- und Sonnenschutz 2023“. Gleichwohl gibt es positive Signale. So planen 41,9 Prozent der Konsument*innen in der DACH-Region noch in diesem Jahr neue Anschaffungen für ihre Fenster – und knapp 20 Prozent in 2024. Dies weisen die repräsentativen und zielgruppengenauen Forschungsergebnisse von 1.000 Personen aus, die Marketmedia24 exklusiv für die neue Studie befragt hat. Parallel geht das Best-Case-Szenario der Kölner Marktforscher davon aus, dass die Handelsumsätze mit Gardinen bzw. innenliegendem Sicht- und Sonnenschutz bis zum Jahr 2030 um 27 Prozent steigen werden.

Obwohl viele Deutsche auf ihr Budget achten müssen, bleiben die Produkte der Branche im Fokus der Menschen. So stellen Anbieter fest, dass aufgrund der gestiegenen Energiekosten gezielt nach Produktlösungen gesucht wird, die mit ihren isolierenden Eigenschaften beim Energiesparen helfen. Richtig eingesetzt können Hausbewohner auf lange Sicht bares Geld sparen und gleichzeitig zum Klimaschutz beitragen, unterstreicht der Verband innenliegender Sicht- und Sonnenschutz (ViS), Wuppertal, und verweist gleichzeitig auf das Zukunftspotenzial von „smarten Lösungen“. Diese tragen zur Verringerung des Energieverbrauchs im Sinne von Nachhaltigkeit und zur Gebäudesicherheit bei, gleichzeitig liegen in der Digitalisierung echte Wettbewerbschancen für die Fachbetriebe der Branche. Insgesamt gibt das Thema Nachhaltigkeit den Takt für die Zukunft von Gardinen, innenliegendem Sicht- und Sonnenschutz vor.

Dass das Thema in Teilen der Bevölkerung bereits ankommt, unterstreichen die aktuellen Primärforschungen von Marketmedia24. Danach ist es für 22,4 Prozent der Deutschen wichtig, dass Gardinen, Rollos, Jalousien & Co. nachhaltig produziert werden oder zertifizierte Umweltsiegel tragen. Für die überwiegende Mehrheit aller Befragungsteilnehmer*innen in der DACH-Region zählen jedoch Qualität, leichte Anbringungsmöglichkeit sowie das Produktdesign zu den wichtigsten Kaufkriterien.

Unter den Vertriebswegen sind aus Sicht der Gardinen-, Sicht- und Sonnenschutz-Hersteller der stationäre Fachhandel und Fachmärkte unverzichtbar. Zwar hat dieses Handelsformat als langjähriger Marktführer seinen Spitzenplatz an den Wettbewerb im Möbelhandel abgeben müssen. Aber mit dem Jahr 2022 wächst der Marktanteil der Spezialisten wieder leicht (plus 0,4 Prozentpunkte). Und gemeinsam mit dem Online-Handel sowie den Bau- und Heimwerkermärkten werden hier aktuell rund Dreiviertel der Marktumsätze repräsentiert.

Für die längerfristige Zukunft (bis 2030) bewertet Marketmedia24 die Entwicklung der Fachhandelsstufe tendenziell zurückhaltend. Dennoch weist das Best-Case-Szenario in der Studie aus, dass dieser Vertriebsweg innerhalb der nächsten sieben Jahre zulegen wird. Das Wachstum der Onliner und Versender wird mit plus 50 Prozent am stärksten ausfallen. Nicht ganz so rosig, aber auf jeden Fall positiv, können unter den gleichen Rahmenbedingungen auch Discounter, Bau- und Heimwerkermärkte und mit vergleichsweise leichterem Umsatzplus der Möbelhandel in die Zukunft schauen.

Wer aktuell und in Zukunft den Verbraucher*innen auf der Spur bleiben will, dem empfiehlt Marketmedia24 die beliebtesten Kommunikations- bzw. Informationsquellen zu studieren. So halten fast 70 Prozent der DACH-Bewohner*innen Suchmaschinen wie Google und Bing für „sehr wichtig“ bzw. „wichtig“, während Social-Media-Kanäle aktuell von 40,8 Prozent Zustimmung erfahren. Überraschenderweise sind für 56,5 Prozent der Youngster (bis 24 Jahre) Werbeprospekte wichtige Info-Tools, und noch einmal fast 50 Prozent dieser Zielgruppe sind an interaktivem Live Shopping zum Beispiel bei TikTok oder Instagram interessiert. Als noch wichtiger werden jedoch die Erfahrungen bzw. Empfehlungen von Freunden, Familie, Kolleg*innen und Kommiliton*innen bewertet.

Since April 2023, the testing service provider Hohenstein has been testing and certifying in two new areas in the field of protective clothing: protective suits and gloves against chemicals and infectious agents. These are covered by Regulation (EU) 2016/425 and are therefore personal protective equipment (PPE).

Protective clothing against infectious agents is used in many types of work: for example, work at sewage plants, waste disposal, animal care, disposal of hazardous waste from hospitals, etc. Workers are exposed to unknown infectious agents (microorganisms, parasites). The protective clothing should protect wearers from the mediums in which the microorganisms are contained, such as liquids, aerosols or solid dust particles.

Hohenstein tests and certifies the following types:

• EN 14605: Protective clothing against liquid chemicals: Liquid-tight (type 3) or spray-tight (type 4) as well as partial protection types PB[3] and PB[4]
• EN 13982-1: Protective clothing against airborne solid particulates: Type 5
• EN 13034: Protective clothing against liquid chemicals: Type 6 and PB[6]

• 1Q23 Performance Summary
• Revenue of US$4B, an increase of 3% QoQ and a decline of 9% YoY
• Reported EBITDA of US$301M, an increase of 269% QoQ and decrease of 62% YOY
• Operating cash flows of US$201M
• Net Operating Debt to Equity of 1.00x
• Reported EPS of THB 0.14

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported improved quarterly earnings as headwinds continue to ease from the previous quarter’s peaks, although still below normalized levels. The company continues to focus on enhancing its global competitiveness as the full benefit of China’s reopening spurs volumes through the year, and as volatile energy costs and the destocking trend by customers begin to normalize.

Indorama Ventures achieved Reported EBITDA of $301 million in 1Q23, an increase of 269% QoQ and a decline of 62% YoY. Sales volumes dropped 8% YoY amid the heavy destocking trend that is impacting the chemical industry globally, although volumes rose 5% QoQ as the pace of destocking begins to slow from the peak in 4Q22. With China reopening from pandemic lockdowns and economic activity increasing, there has been marginal improvement in benchmark spreads, albeit below historical levels. In Europe, the warmer-than-expected winter contributed to lower energy prices and alleviated the cost pressures faced last year.

The Group reported an overall decline in Q1 earnings on a year-on-year basis as continued destocking by customers kept sales volumes below consumer consumption levels. CPET posted Reported EBITDA of $142 million, a 74% decrease YoY as sales volumes dropped 9%. Fibers segment achieved Reported EBITDA of $32 million, a decrease of 69% YoY as all three verticals reported declining sales. Integrated Oxides and Derivatives (IOD) segment posted a 4.4% growth in YoY Reported EBITDA to $128 million as volumes rose 4.4% YoY.

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

Jan O’Regan: INDA Lifetime Service Award
Jan O’Regan was the Director, Strategic Initiatives and Nonwovens Marketing, for Cotton Incorporated and retired in 2022. In this capacity, she uncovered new opportunities for cotton to bring value into the nonwovens industry. Her work included leading efforts in strategic planning, technical and market project management, and sharing new ideas and results with the global supply chain.
O’Regan spent over four decades in the nonwovens industry in various roles, including sales, marketing, strategic planning and business management. Market responsibilities included consumer and industrial markets on regional, national, and global teams. Over the most recent years, she applied these broad experiences to new markets for cotton in nontraditional applications.
Serving and volunteering with INDA for decades, O’Regan most recently chaired the World of Wipes® committee, which she efficiently organized to produce innovative conferences for the wipes industry.  She was a frequent speaker at INDA, INSIGHT, EDANA, and other events, and for nearly two decades was a go to source of information for cotton fibers in nonwovens and hygiene. O’Regan earned a BS in Textiles and Business, summa cum laude, from Penn State University and an MBA from New York University’s Stern School of Business.

Seshadri Ramkumar: INDA Lifetime Technical Achievement Award
Seshadri Ramkumar has over twenty-five years of experience within the technical nonwovens space, conducting industry leading research and educating nonwovens professionals at Texas Tech University (TTU).  At TTU, he established the Nonwovens Laboratory. Many of Ramkumar’s students have gone on to become technical leaders within their organizations and the nonwovens industry.
Ramkumar has numerous patent and invention disclosures, including Fibertect® toxic chemical decontamination wipes which have been recognized by the American Chemical Society as a notable success of federally supported innovation, endorsed by Lawrence Livermore National Laboratory, and adopted by multiple branches of the military.
In addition to many peer-reviewed publications, articles, and columns collectively over 500, including one on nanofibers that has been cited over 2,100 times, Ramkumar has contributed his expertise on the editorial boards of multiple fiber, nonwoven, and textile journals. Ramkumar has also organized conferences for nonwovens and textiles and actively promoted INDA and its technical training offerings for over 20 years.
He is a longtime member of the INDA Technical Advisory Board, been recognized by TAPPI, Society of Dyers and Colorists (UK), the Textile Institute (UK), and the Textile Association (INDIA), and received numerous awards from TTU.
Ramkumar holds a Bachelors of Technology (Textiles), Graduated with Distinction, and a Masters of Technology (Textiles), University First Rank in the Discipline, Anna University, and a Ph.D. (Textile Materials) from the University of Leeds, UK.

Jim Robinson: INDA Lifetime Technical Achievement Award
Jim Robinson has 33 years in the absorbent hygiene industry, including 28 years as a Technical Service Manager at BASF. He led technical teams that focused on the application of superabsorbent polymers (SAP) in hygiene products. Robinson has extensive knowledge of SAP applications, absorbent core formation, and hygiene article design, performance and testing. While with BASF, Robinson led efforts with multiple external companies to provide co-supplier solutions to hygiene converters.
Robinson’s extensive understanding of test methods and test method development led to his coordinating the establishment of fitness for use standards of adult incontinent products with the National Association for Continence and involvement in development and review of absorbent product test methods with INDA/EDANA. He is also an active contributor to INDA’s Technical Advisory Board and Hygienix organizing committee and was a contributing developer in establishing the INDA Absorbent Hygiene Training Course. Robinson has provided numerous presentations at INSIGHT, Hygienix, and RISE on performance and interactions of absorbent system components.
Recently, Robinson has been consulting and contributing to the success of multiple start-ups including those having been nominated for INDA product awards. Robinson has a BS in Chemistry from Hampden-Sydney College and an MS in Chemistry from Duke University.

Ed Thomas: INDA Lifetime Technical Achievement Award
Ed Thomas retired after 39 years, with 32 years in the nonwovens industry, and has remained active teaching the Intermediate Nonwovens Training Course for INDA and The Nonwovens Institute at North Carolina State University, as well as providing consulting services to the industry.
Thomas’ experience includes Process Engineering Manager and Plant Management, DuPont; Technical Director, Reemay; VP of Research and Operations, VP of Operations and Technology, and Global VP of Research and Development for Fiberweb/BBA Nonwovens; and Head of Research and Product Development, First Quality Nonwovens.
Thomas holds 10 U.S. nonwoven patents and he and his teams have been awarded more than 250 patents for numerous and diverse innovations that have played significant roles in the success of the nonwovens industry. These include applications for the global hygiene market, industrial nonwovens, and filtration media.
During his career, Thomas has presented several keynote addresses and papers to industry conferences, participated in North Carolina State University’s Nonwovens Cooperative Research Center (NCRC) prior to it becoming The Nonwovens Institute (NWI), INDA’s Technical Advisory Board, INDA’s Sustainability Committee, and was Vice Chair of NWI’s Industrial Advisory Board prior to retirement and remains an Emeritus member.
Thomas received his mechanical engineering degree from SUNY Buffalo.

er Bundesverband Medizintechnologie (BVMed) drängt das Bundesgesundheitsministerium und die beteiligten Ressorts, die guten Ansätze zu einer besseren Nutzung von Gesundheitsdaten aus der Digitalstrategie zügig in ein Gesetz zu gießen. „Bevor Monate für die Diskussion um den künftigen Umgang mit ChatGPT ins Land gehen, sollten die Regelungen aus der Digitalstrategie des Bundesgesundheitsministeriums (BMG) rasch umgesetzt werden, die unumstritten sind“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der BVMed hatte die im März 2023 vorgelegte Digitalisierungsstrategie für das Gesundheitswesen und die Pflege insgesamt positiv bewertet. „Darin lassen sich gute Ansätze für Forschung und Entwicklung von Medizintechnologien erkennen, die den Versorgungs- und Forschungsstandort Deutschland nachhaltig stärken und fördern könnten“, so BVMed-Digitalexpertin Natalie Gladkov.

Besonders wichtig sind nach Ansicht des Medizintechnik-Branchenverbandes der verbesserte Zugang zu Versorgungsdaten für forschende Unternehmen, die einheitliche Auslegung des nationalen und europäischen Datenschutzrechts sowie die Ausweitung der digitalen Gesundheitsanwendungen (DiGA) auf Medizinprodukte der Klasse IIb.

„Gleichzeitig vermissen wir einen strukturierten Prozess zur adäquaten Einbindung der Hilfsmittel-Leistungserbringer und Homecare-Versorger in die digitale Infrastruktur“, so Gladkov. Bei der Ausweitung des „Fast Track“- Verfahrens für DiGA sollte zudem ein schnellerer Zugang von digitalen Medizinprodukten aller Risikoklassen – also auch Klasse III-Medizinprodukte – in die Gesundheitsversorgung ermöglicht werden.

Insgesamt berührt die Digitalisierungsstrategie sehr viele verschiedene Punkte, „kratzt jedoch häufig nur an der Oberfläche“, so der BVMed. In den meisten Fällen fehle es an ausführlichen Erläuterungen, wie die Vorhaben konkret umgesetzt werden sollen. Dazu zählt der BVMed beispielsweise den Einsatz von Telemonitoring bei Herzinsuffizienz, der im Strategiepapier nur kurz erwähnt wird. Außerdem sollten telemedizinische Anwendungen generell gestärkt und gefördert werden, da nur damit eine flächendeckende Versorgung sichergestellt werden kann.

„Wichtig ist es deshalb, dass die Maßnahmen nun rasch in Gesetzgebungsverfahren münden und umgesetzt werden“, so die BVMed Digitalexpertin. Zudem sollte die Expertise der MedTech-Unternehmen bei spezifischen Themen stärker hinzugezogen werden, beispielsweise bei den Projektvorhaben der Digitalen Gesundheitsagentur.

Das Fazit von BVMed-Geschäftsführer Dr. Marc-Pierre Möll: „Wir dürfen nicht länger Zeit bei der Digitalisierung des Gesundheitswesens und der Pflege sowie bei der Eröffnung der Möglichkeiten bei der Datennutzung verlieren.“