From the Sector

Reset
167 results
30.09.2022

Carbios published 2022 half-year results

Carbios published its operating and financial results for the first half of 2022. The financial statements as of June 30, 2022 were approved by Carbios' Board of Directors.

Carbios published its operating and financial results for the first half of 2022. The financial statements as of June 30, 2022 were approved by Carbios' Board of Directors.

  • Project to build the world's first PET biorecycling plant, in partnership with Indorama Ventures, the world's largest manufacturer of recycled PET: Establishment in France with strong backing from national government and the Grand-Est Region
  • On track to bring recycled PET from Carbios' proprietary innovation process to market by 2025
  • Fully operational industrial demonstration plant and step-by-step technological validation of the scale-up of the industrial solution designed and developed by Carbios
  • Launch of a textile consortium in partnership with On, Patagonia, PUMA and Salomon
  • Scientific article in the prestigious Biophysical Journal
  • Carbios strengthens its Governance and Management team
  • Carbios enhance its financial structure, banking the €30 million loan from the European Investment Bank (EIB)
  • Carbios Group's net cash position: €121 million at June 30, 2022

See the full report here.

More information:
Carbios financial year 2022
Source:

Carbios

27.09.2022

Lenzing awarded by EcoVadis for sustainability

  • Lenzing has been awarded the highest CSR rating from EcoVadis for the second consecutive time
  • Global rating standard evaluates 90,000 companies: Lenzing among top 1 percent of its industry
  • enzing joins the UN Global Compact sustainability initiative

Lenzing Group has been awarded platinum status in the CSR rating from EcoVadis. This comprehensive assessment covers the four key practices of corporate social responsibility: the environment, fair working conditions and human rights, ethics and sustainable procurement.

This is the second time that EcoVadis, a leading international provider of sustainability ratings for businesses, has awarded platinum status to Lenzing for its sustainability performance. As a result, Lenzing ranks among the world’s top 1 percent of companies in its sector that are rated by EcoVadis.

  • Lenzing has been awarded the highest CSR rating from EcoVadis for the second consecutive time
  • Global rating standard evaluates 90,000 companies: Lenzing among top 1 percent of its industry
  • enzing joins the UN Global Compact sustainability initiative

Lenzing Group has been awarded platinum status in the CSR rating from EcoVadis. This comprehensive assessment covers the four key practices of corporate social responsibility: the environment, fair working conditions and human rights, ethics and sustainable procurement.

This is the second time that EcoVadis, a leading international provider of sustainability ratings for businesses, has awarded platinum status to Lenzing for its sustainability performance. As a result, Lenzing ranks among the world’s top 1 percent of companies in its sector that are rated by EcoVadis.

In line with its “Naturally positive” sustainability strategy, the Lenzing Group has set ambitious targets in each of its core strategic areas, aimed at bolstering its capacity to move from a linear to a circular model. Lenzing reports the corresponding implementation measures and the progress it has made in its annual sustainability report. This high level of accountability and transparency was particularly praised in the assessment by EcoVadis. The rating provider also highlighted Lenzing’s comprehensive measures to reduce air pollution, wastewater and greenhouse gases, in addition to its provision of skills development training and health care programs for staff members.

Partnerships for systemic change
Lenzing forges strategic partnerships with various stakeholders to meet its ambitious climate and sustainability targets and drive forward systemic change in the textile and nonwoven industries. This is why Lenzing, as one of 15,000 companies worldwide, joined the United Nations Global Compact. As a member, Lenzing is committed to upholding human rights, respecting the rights of employees and their representatives, protecting the environment, enabling fair competition and combating corruption.

Source:

Lenzing AG

(c) JEC Group
23.09.2022

JEC Forum DACH 2022 announces program

This year’s JEC forum DACH, taking place from November 29 to 30, 2022, is strategically located in a composites « golden triangle », between Munich, Augsburg and Ingelstadt. This dynamic area, at the heart of the Bavarian region is known to be hosting major companies such as Airbus, Faurecia, Kuka, Siemens, Voith Composites, KraussMaffei Technologies, Cevotec, Munich Composites, or Premium Aerotec, thus promising a two-days opportunity to meet with key decision makers.

The digital platform available to all participants prior to the event enables to schedule one to one business meetings between buyers and suppliers from the whole value chain of composites, as well as informal networking during breaks, lunches and evening event.

In total, 500 attendees, suppliers and buyers, from Germany, Austria and Switzerland, are expected to participate to JEC Forum DACH 2022.

Business meetings event*
DAY 1 – November 29, 2022:

This year’s JEC forum DACH, taking place from November 29 to 30, 2022, is strategically located in a composites « golden triangle », between Munich, Augsburg and Ingelstadt. This dynamic area, at the heart of the Bavarian region is known to be hosting major companies such as Airbus, Faurecia, Kuka, Siemens, Voith Composites, KraussMaffei Technologies, Cevotec, Munich Composites, or Premium Aerotec, thus promising a two-days opportunity to meet with key decision makers.

The digital platform available to all participants prior to the event enables to schedule one to one business meetings between buyers and suppliers from the whole value chain of composites, as well as informal networking during breaks, lunches and evening event.

In total, 500 attendees, suppliers and buyers, from Germany, Austria and Switzerland, are expected to participate to JEC Forum DACH 2022.

Business meetings event*
DAY 1 – November 29, 2022:

  • 10.15 – 11.45 am – “Keynote and Plenary Conference Session : Market Developments
  • Moderator: Dr. Michael Effing, AVK
  • 4.0 – 5.30 pm – “Keynote and Plenary Conference Session: Recycling of Composites

DAY 2 – November 30, 2022:

  • 9.00– 10.30 am – “Keynote and Plenary Conference Session: Sustainability of Composites
  • 3.15 – 4.45 pm – “Keynote and Plenary Conference Session: Innovations: Raw Materials, Processes and Applications

Celebrating composites innovation through awards and startup competition

  • The AVK Innovation Awards: Goal is to promote and give prominence to new products/components and applications made from fiber-reinforced plastics (FRP) and promote new processes and methods for manufacturing FRP products.
  • Startup Booster competition: The contest is open to entrepreneurs, SMEs, startups and academic spinoffs building innovative composite and advanced materials projects that are based in Germany, Austria or Switzerland (the DACH region).

*You can view the full program here.

Source:

JEC Group

Stahl
19.09.2022

EcoVadis Platinum rating for Stahl

Stahl, an active proponent of responsible chemistry, has been awarded the highest EcoVadis Platinum rating, placing it within the top 1% of companies assessed by EcoVadis. The award underlines Stahl’s commitment to collaborating with its partners to reduce its environmental impact and build a more responsible and transparent supply chain.

Stahl, an active proponent of responsible chemistry, has been awarded the highest EcoVadis Platinum rating, placing it within the top 1% of companies assessed by EcoVadis. The award underlines Stahl’s commitment to collaborating with its partners to reduce its environmental impact and build a more responsible and transparent supply chain.

EcoVadis is a globally recognized evidence-based assessment platform that reviews the performance of more than 90,000 organizations across key sustainability criteria. These include environmental impact, labor and human rights standards, ethics, and sustainable procurement practices. The latest report from EcoVadis highlights Stahl’s positive progress across all these areas and builds on the Gold rating achieved by the company in 2021. Stahl’s 2030 target is to maintain the EcoVadis Platinum rating by working closely with its value-chain partners to help them reduce their environmental impact – including by supporting their transition to renewable feedstocks. In 2021, 80% of Stahl’s total spend on raw materials was supplied by EcoVadis-rated suppliers.
 
The new EcoVadis rating comes as Stahl accelerates its efforts to ensure a more responsible and transparent supply chain. Recent steps toward this goal have included establishing a dedicated Supply Chain Transparency division within the company’s Environmental, social, and governance (ESG) department. The division will be tasked with coordinating a new product development framework that prioritizes the responsible sourcing of raw materials. Furthermore, in July 2022, Stahl submitted a new greenhouse gas (GHG) emissions reduction target, including a specific commitment regarding the company’s Scope 3 upstream emissions. Stahl aims to reduce these by at least 25% over the next 10 years, compared with the base year (2021). Stahl expects to achieve this reduction primarily by working with its suppliers to replace fossil-based raw materials with lower-carbon alternatives.

Source:

Stahl Holdings B.V.

15.09.2022

DyStar cautiously optimistic about the financial and environmental performance

  • Integrated Sustainability Report 2021 – 2022 published

DyStar, a leading specialty chemical company released its twelfth annual Sustainability Performance Report. The report is prepared in accordance with the updated GRI Standards 2021: Core option. DyStar continues to adopt the Integrated Reporting <IR> framework to communicate how the group has successfully created tangible value across multiple stakeholder groups in six major capitals.

DyStar reports that they have inched themselves closer to some of their 2025 target of reducing the environmental footprint by 30% for every ton of product, from 2011 levels. Here are some key highlights for FY2021:

  • Integrated Sustainability Report 2021 – 2022 published

DyStar, a leading specialty chemical company released its twelfth annual Sustainability Performance Report. The report is prepared in accordance with the updated GRI Standards 2021: Core option. DyStar continues to adopt the Integrated Reporting <IR> framework to communicate how the group has successfully created tangible value across multiple stakeholder groups in six major capitals.

DyStar reports that they have inched themselves closer to some of their 2025 target of reducing the environmental footprint by 30% for every ton of product, from 2011 levels. Here are some key highlights for FY2021:

  • Recorded more than 29% increase in revenue compared to 2020
  • Zero workplace fatalities, high-consequence injuries, and work-related ill health
  • 40% reduction in Greenhouse gas (GHG) emission intensity, compared to 2011
  • 37% decrease in wastewater emission intensity, compared to 2011

The Group was able to remain resilient and steer itself toward optimistic growth and recovery from the global pandemic in FY2021. In face of recent geopolitical events and macroeconomic factors such as soaring energy costs, DyStar and the wider supply chain will continue to face challenges. As a result, the company believes it is crucial to stay committed to their 2025 Sustainability goals to continue generating value for all stakeholders in the longer term, well beyond these turbulent times.

The report communicates DyStar’s progress towards its sustainability agenda and material topics. As part of our commitment to environmental sustainability, only an e-magazine and a PDF version will be made available for download from www.DyStar.com/sustainability-reports/

More information:
DyStar Sustainability Report
Source:

DyStar

(c) Adient
As a symbol for a sustainable cooperation, Michel Berthelin (Executive Vice President EMEA, 2nd from left) and Henrik Henriksson (CEO H2 Green Steel, 1st from right) planted a ginkgo tree together with their teams in front of the Adient EMEA headquarters in Burscheid, Germany.
01.09.2022

Adient: Cooperation with H2 Green Steel to reduce carbon footprint

Adient, a supplier of seating systems for the automotive industry, has entered into a cooperation with Swedish steelmaker H2 Green Steel (H2GS) to reduce the carbon footprint in its value chain.
 
On 1st September Michel Berthelin, Executive Vice President Adient EMEA, and Henrik Henriksson, CEO of H2 Green Steel, have mutually signed an agreement to supply fossil-free steel with low carbon footprint from 2026 on and subsequently use it in Adient's metal products.

Adient, a supplier of seating systems for the automotive industry, has entered into a cooperation with Swedish steelmaker H2 Green Steel (H2GS) to reduce the carbon footprint in its value chain.
 
On 1st September Michel Berthelin, Executive Vice President Adient EMEA, and Henrik Henriksson, CEO of H2 Green Steel, have mutually signed an agreement to supply fossil-free steel with low carbon footprint from 2026 on and subsequently use it in Adient's metal products.

Michel Berthelin explains the background to the cooperation: “As a company, we are committed to the Science Based Targets Initiative, a collaboration between leading global institutions to set a science-based climate target. We also support the Carbon Disclosure Project, which helps companies and cities to understand and disclose their environmental impacts. The decision to shift parts of the steel volume sourced for our production to a steel with low carbon footprint is part of our sustainability strategy. It is our goal to reduce emissions at our production sites that are caused directly by our own sources or indirectly by our energy suppliers by 75% by 2030. In parallel, we aim to reduce emissions along our supply chains by 35% over the same period. In doing so, Adient actively fosters the industry's transformation towards a more responsible use of natural resources.”

Steel from H2 Green Steel is produced with up to 95% less CO2 emissions compared to conventional steel production. The company achieves this by replacing coal with green hydrogen in production and by the use of electricity from non-fossil sources. In this way, mainly water and heat are produced as waste products.

Source:

Adient

22.08.2022

NCTO: U.S. Educational Institutions partner with Honduran University to educate Students for Textile Jobs

North Carolina educational institutions are joining forces with an Honduran university to educate and train thousands of students for the next generation textile workforce to meet a rising tide of nearshoring and onshoring in Honduras, Central America and the United States.

The U.S. Department of State issued a statement of public support for the MOU and the unique collaboration between the U.S. and Honduran institutions.

North Carolina educational institutions are joining forces with an Honduran university to educate and train thousands of students for the next generation textile workforce to meet a rising tide of nearshoring and onshoring in Honduras, Central America and the United States.

The U.S. Department of State issued a statement of public support for the MOU and the unique collaboration between the U.S. and Honduran institutions.

The initiative will launch a series of educational workforce development programs, ranging from training and certificate programs to undergraduate and graduate degrees, in textile-related areas of study.
 
The partnership comes at a defining moment for the U.S., Honduras and Central America, which are seeing historical levels of investment in textile and apparel production stemming from a global supply chain crisis that has driven a significant shift in sourcing out of Asia to the U.S. and the region. Nearly $1 billion of historic textile and apparel investment is anticipated in the U.S. and Central America this year alone. And this partnership also creates an educational pathway to economic opportunity in Honduras and the region that not only creates a skilled and resilient workforce but can also help to address the root causes of irregular migration.

Current growth projections indicate a need for more than 10,000 new skilled workers in the textile industry in Honduras alone over the next five years.

The U.S. and this region are inextricably linked through a textile and apparel co-production chain under the U.S.-Central America-Dominican Republic Free Trade Agreement (CAFTA-DR) that has generated $12.6 billion in annual two-way trade in the sector and supports 1 million workers in the U.S. and the region.
 
North Carolina plays a central role in this co-production chain. It is the second largest state for textile employment nationally with over 36,000 workers, and the state’s $2.7 billion in textile-related exports leads the nation. The Northern Triangle, including Honduras, is a major export destination for U.S. yarns and fabrics that come back as finished items under the U.S.-CAFTA-DR trade agreement.

Fashion Revolution
19.08.2022

Results of the FASHION TRANSPARENCY INDEX 2022

The world’s largest fashion brands and retailers must increase transparency to tackle the climate crisis and social inequality, according to the latest Fashion Transparency Index.

The seventh edition of the Fashion Transparency Index ranks 250 of the world’s largest fashion brands and retailers based on their public disclosure of human rights and environmental policies, practices, and impacts, across their operations and supply chains.

  • Brands achieved an average score of just 24%, with nearly a third of brands scoring less than 10%
  • The majority of brands (85%) do not disclose their annual production volumes despite mounting evidence of clothing waste around the world
  • Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage

The Index reveals insights into the most pressing issues facing the fashion industry, like:

The world’s largest fashion brands and retailers must increase transparency to tackle the climate crisis and social inequality, according to the latest Fashion Transparency Index.

The seventh edition of the Fashion Transparency Index ranks 250 of the world’s largest fashion brands and retailers based on their public disclosure of human rights and environmental policies, practices, and impacts, across their operations and supply chains.

  • Brands achieved an average score of just 24%, with nearly a third of brands scoring less than 10%
  • The majority of brands (85%) do not disclose their annual production volumes despite mounting evidence of clothing waste around the world
  • Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage

The Index reveals insights into the most pressing issues facing the fashion industry, like:

  • As new and proposed legislation focuses on greenwashing claims, almost half of major brands (45%) publish targets on sustainable materials yet only 37% provide information on what constitutes a sustainable material.
  • Only 24% of major brands disclose how they minimise the impacts of microfibres despite textiles being the largest source of microplastics in the ocean.
  • The vast majority of major brands and retailers (94%) do not disclose the number of workers in their supply chains who are paying recruitment fees. This paints an unclear picture of the risks of forced labour as workers may be getting into crippling debt to accept jobs paying poverty wages.
  • While many brands use their channels to talk about social justice, they need to go beyond lip service. Just 8% of brands publish their actions on racial and ethnic equality in their supply chains.

Despite these results, Fashion Revolution is encouraged by increasing supply chain transparency among many major brands, primarily with first-tier manufacturers where the final stage of production occurs, e.g. cutting, sewing, finishing and packing. Nine brands have disclosed their first-tier manufacturers for the first time this year. It is encouraging to see significant progress across market segments including luxury, sportswear, footwear and accessories and across different geographies.

Fashion Revolution’s co-founder and Global Operations Director Carry Somers says: “In 2016, only 5 out of 40 major brands (12.5%) disclosed their suppliers. Seven years later, 121 out of 250 major brands (48%) disclose their suppliers. This clearly demonstrates how the Index incentivises transparency but it also shows that brands really are listening to the millions of people around the world who keep asking them #WhoMadeMyClothes? Our power is in our persistence.”

More key findings from the Fashion Transparency Index 2022:

Progress on transparency in the global fashion industry is still too slow among 250 of the world’s largest fashion brands and retailers, with brands achieving an overall average score of just 24%, up 1% from last year
For another year, the initiative has seen major brands and retailers publicly disclose the most information about their policies, commitments and processes on human rights and environmental topics and significantly less about the results, outcomes and impacts of their efforts.

Most (85%) major brands still do not disclose their annual production volumes despite mounting evidence of overproduction and clothing waste
Thousands of tonnes of clothing waste are found globally. However, brands have disclosed more information about the circular solutions they are developing (28%) than on the actual volumes of pre- (10%) and post-production waste they produce (8%). Brands have sat by as waste importing countries foot the bill, resulting in serious human rights and environmental implications.

Just 11% of brands publish a responsible purchasing code of conduct indicating that most are still reluctant to disclose how their purchasing practices could be affecting suppliers and workers
Greater transparency on how brands interact with their suppliers ought to be a first step towards eliminating harmful practices and promoting fair purchasing practices. The poor performance on transparency in this vital area is a missed opportunity for brands to demonstrate they are serious about addressing the root causes of harmful working conditions, including the instances where they themselves are the key driver.

Despite the urgency of the climate crisis, less than a third of major brands disclose a decarbonisation target covering their entire supply chain which is verified by the Science-Based Targets Initiative
Many brands and retailers rely heavily on garment producing countries that are vulnerable to the impacts of the climate crisis, yet our research shows that only 29% of major brands and retailers publish a decarbonisation target covering their operations and supply chain which is verified by the Science Based Targets Initiative.

Only 11% of brands publish their supplier wastewater test results, despite the textile industry being a leading contributor to water pollution
The fashion industry is a major contributor to water pollution and one of the most water intensive industries on the planet. Only 11% of major brands publish their wastewater test result, and only 25% of brands disclose the process of conducting water-related risk assessments in their supply chain. Transparency on wastewater test results is key to ensuring that brands are held accountable for their potentially devastating impacts on local biodiversity, garment workers and their communities.

Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage nor do they disclose if they isolate labour costs
Insufficient progress is being made by most brands towards ensuring that the workers in their supply chain are paid enough to cover their basic needs and put aside some discretionary income. Just 27% of brands disclose their approach to achieving living wages for supply chain workers and 96% do not publish the number of workers in their supply chain paid a living wage. In response, we have joined forces with allies across civil society to launch Good Clothes, Fair Pay. The campaign demands groundbreaking living wage legislation across the garment, textile and footwear sector.

 

Source:

Fashion Revolution

Photo: Mark Stebnicki, pexels
16.08.2022

USDA presents new study of Chinese Cotton Textile Industry

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

Their study reviewed the regional patterns of China’s cotton textile industry development and identified growing geographic separation between cotton production and textile manufacturing since the 1990s using data from Chinese sources. The study investigated spatial patterns of demand for imported cotton by analyzing lists of Chinese companies applying for a share of the import quota from 2016 to 2022. Multiple regression analysis was used to control for potentially confounding influences when investigating whether companies in coastal provinces were more likely to use imported cotton than similarly sized companies in other regions.

Textile manufacturers — the main consumers of cotton — are concentrated in coastal and central regions where the share of China’s cotton production fell from over 50 percent to 10 percent during 2011–21. These geographic changes are a factor influencing global trade in cotton and textiles. Additionally, the use of forced labor in Xinjiang attracted more attention to the industry, prompting the United States and other countries to ban products produced in the region.

This study reviews the economic, geographic, and policy factors reshaping the industry and influencing the global trade of cotton and textile products. The study also examines data on Chinese companies applying for a share of China’s cotton import quota to gain insight about the demand for imported cotton.

China became the world’s largest producer, consumer, and importer of cotton soon after joining the World Trade Organization (WTO) in 2001. Despite adopting a tariff-rate quota (TRQ) system for cotton imports and issuing supplemental quotas in most years, the large number of cotton goods manufacturers that request shares of the quota suggests demand for imported cotton exceeds  the quota.

While the TRQ was intended to protect China’s cotton farmers, many farmers abandoned the labor-intensive crop as wages rose rapidly in many other industries and other crops produced higher returns. In response, officials encouraged cotton production in the relatively remote region of Xinjiang to prevent China from becoming reliant on imported cotton. Xinjiang growers receive a subsidy payment for cotton, and subsidies for machinery and seeds. A transportation subsidy induces textile manufacturers in eastern and central regions to purchase cotton from Xinjiang, which is about 2,200 to 2,900 miles from most of the country’s textile manufacturers. Financial support and other incentives encourage manufacturers to shift operations to Xinjiang.

Textile manufacturers in China are highly interested in importing cotton due to its lower price and quality. China imports about 20 percent of its cotton, and the United States is a chief exporter of cotton to China. While imported cotton is used in all provinces, manufacturers near the eastern seaboard show a greater propensity for imports. Nevertheless, in all regions, domestic cotton has the largest share of mill use.

Between 2016 and 2022, 1,581 companies applied for a share of the TRQ, and 265 companies applied in all 7 years. Most of these companies also applied for supplemental quotas issued with slightly higher tariffs. This large number of applicants suggests that imports could be even greater if quotas did not limit them. The operation of the quota application process is not public information, but data submitted by applicants suggests access to imported cotton is uneven. About 14 percent of applicants said imported cotton comprised over half of the cotton they used. Another 20 percent of companies requesting import quota did not use any imported cotton, suggesting that many applicants are unable to import. Textile manufacturers coped with limits on cotton imports by increasing their use of synthetic, chemical-based fibers or by importing cotton yarn. From 2000 to 2020, China’s yarn imports doubled from under 1 million metric tons to around 2 million metric tons with Vietnam supplying about 45 percent of that total in 2020.

The number of textile manufacturers in Xinjiang applying for a share of the cotton import quota rose from 37 to 68 between 2016 and 2022. However, imports constituted less than 2 percent of  the cotton Xinjiang applicants reported using—and 66 percent of them reported using no imported cotton—suggesting that applications from Xinjiang textile companies were often denied.
Analysis found that applicants in coastal provinces used more imported cotton than similarly sized applicants in other regions. Each location of a multi-plant company must apply separately for tariff-rate quotas. Textile manufacturers in Xinjiang that requested a share of the import quota included branches of some of China’s largest textile companies, but the analysis found that Xinjiang applicants used less imported cotton than similar manufacturing plants located in other regions. China’s role as a cotton importer appears to have peaked, while other countries are increasing their share of imports.

USDA baseline projections suggest that by 2030 Vietnam, Pakistan, Indonesia, Bangladesh, and Turkey will together account for 47 percent of the world’s cotton imports while China will only account for 24 percent. The study cam be downloaded from the USDA website.

More information:
cotton Cotton USA China Xinjiang
04.08.2022

EU-India Free Trade negotiations

  • Opportunity to rebalance trade relations and promote a global sustainable textile industry

Today’s trade relations between the EU and India in textiles and clothing are characterised by a large and systemic trade deficit for the EU; annual imports from India exceed €6 bln (2021) – making it the 4th supplier – while EU exports to India reached just half a billion – the 20th place in our export markets.

Against this background, the free trade negotiations are an opportunity to rebalance that relationship; European textile and clothing companies can offer high quality and innovative products for the Indian market, but they can also offer solutions to reduce the environmental footprint of the textile industry.

EURATEX, as the voice of textiles and apparel manufacturers in Europe, supports an ambitious EU trade agenda, that puts reciprocity, transparency, fair competition and equal rules at the centre of its action. The FTA is an opportunity to establish a more sustainable and fair trading system, based on rules, global environmental and social standards, which are effectively respected by all.

  • Opportunity to rebalance trade relations and promote a global sustainable textile industry

Today’s trade relations between the EU and India in textiles and clothing are characterised by a large and systemic trade deficit for the EU; annual imports from India exceed €6 bln (2021) – making it the 4th supplier – while EU exports to India reached just half a billion – the 20th place in our export markets.

Against this background, the free trade negotiations are an opportunity to rebalance that relationship; European textile and clothing companies can offer high quality and innovative products for the Indian market, but they can also offer solutions to reduce the environmental footprint of the textile industry.

EURATEX, as the voice of textiles and apparel manufacturers in Europe, supports an ambitious EU trade agenda, that puts reciprocity, transparency, fair competition and equal rules at the centre of its action. The FTA is an opportunity to establish a more sustainable and fair trading system, based on rules, global environmental and social standards, which are effectively respected by all.

In this context, EURATEX highlights that the sector needs open and efficient markets, but combined with effective controls where necessary, thus ensuring level playing field for European companies. It is clearly essential that the same level of market access to India – both in terms of tariff and non-tariff barriers – is available to EU producers as vice versa.

India today benefits from reduced customs duties due to GSP. For European companies instead, market access to India is challenging, facing non-tariff barriers (related to proof of origin, quality control procedures, etc.) as well as national or state-level support programmes which distort the level playing field between EU and Indian companies.

That level playing field should also apply to our sustainability targets. As the EU will roll out its EU Textile Strategy, setting ambitious standards and restrictions (e.g. on chemicals), we must ensure the FTA is fully aligned with that strategy.

Director General Dirk Vantyghem commented: “We look to these negotiations with great interest. The FTA is an opportunity to develop a shared ambition between the European and Indian industry to make sustainable textiles the norm, and to create a regulatory framework where our companies can compete in a free and fair environment.”

Source:

EURATEX

27.07.2022

Autoneum: Half Year Results 2022

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Current geopolitical developments substantially affected business performance in the first half of 2022. They are accompanied by accelerating inflation and significant price increases in the commodities markets, which the war in Ukraine has further exacerbated. These developments are also delaying market recovery in the automotive industry. Autoneum does everything it can to minimize the impact on the Group. Despite the present challenges, we will continue to implement our strategy, focusing on innovative and sustainable technologies for growing markets of the future.

  • Revenue development influenced by the war in Ukraine and supply chain bottlenecks*
  • Low production volumes and high inflation impact profitability*
  • Solid free cash flow enables further reduction in net debt*
  • Business Groups*
  • Well positioned for e-mobility and sustainability*
  • Expanding the product portfolio for electric vehicles*
  • Autoneum joins the Science Based Targets initiative*

Outlook
According to global market forecasts1, automobile production will pick up again in the second half of the year with growth of 8.8% compared with the first half-year 2022. For full-year 2022, global automobile production is projected to reach 80.8 million vehicles, which is equivalent to a 4.7% increase on 2021. Based on the market forecasts, Autoneum expects to improve the operating result for the second half of the year. This will be supported by ongoing customer negotiations with a view to fair sharing of costs, the accompanying contribution of vehicle manufacturers to shouldering the sharp increases in material, energy and transport costs and the foreseeable normalization of production after the easing of lockdown measures in China. On this basis, Autoneum expects substantially enhanced results for full-year 2022, as well as an improvement in the EBIT margin to 2.0% to 3.0%. Free cash flow is expected to be in the mid to high double-digit million range for the full year 2022.

*For more information see attached document

1Source: IHS “Light Vehicle Production Forecasts” – July 15, 2022

More information:
Autoneum supply chain acoustic
Source:

Autoneum Management AG

(c) Lindauer DORNIER GmbH
Maja Dornier (lhs) and Prof. Dr. Wolf Mutschler (rhs) hand over the Peter Dornier Foundation Award, endowed with 5,000 euros, to the award winner Dipl.-Ing. Mathis Bruns
26.07.2022

Peter Dornier Foundation Prize 2022 honours textile research on woven heart valve

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

The human heart is a high-performance machine: over the course of a person's life, it beats almost three billion times, pumping around 200 million litres of blood through the body. Enormous stresses that can sometimes lead to life-threatening signs of wear and tear. If a heart valve gets out of step, patients usually get artificial-mechanical or biological valves as a replacement. However, mechanical solutions imply patients to take blood-thinning medication for the rest of their lives. In addition, there may be audible closing noises. For example, almost a quarter of patients with mechanical heart valves complain of sleep disturbances. Biological heart valves, on the other hand, such as those made from animal tissue, require a great deal of manual work and have a shorter lifetime.

Potential of weaving for medical products demonstrated
For this reason, Graduate Engineer Mathis Bruns at the Institute for Textile Machinery and High-Performance Textile Materials Technology (ITM) at the TU Dresden is researching an implant alternative made of fabric. As part of a research project that also involved heart surgeons from the Dresden Heart Centre and the University Hospital in Würzburg, Mr. Bruns provided important findings for weaving an artificial heart valve in his diploma thesis. For his work entitled "Development of tubular structures with integrated valve function", Mathis Bruns has now received the Peter Dornier Foundation Prize 2022, endowed with 5,000 euros. In his laudation, Dr. Adnan Wahhoud, former head of the development department of air-jet weaving machines at DORNIER in Lindau, said: "With his work, the winner of the award demonstrates very clearly the potential of weaving technology to produce fabrics of complex form, geometry and structure with the aim of prolonging and improving people's lives." The award-winning thesis enriches research into three-dimensional tissues for use in medicine.

Weaving replacement heart valves without seams
"A particular advantage of our approach is the integral production method", says foundation prize winner Mathis Bruns. “The geometry and function of a heart valve is that complex that woven heart valves could not be produced in this form previously. Through the combined use of a rigid rapier weaving machine with bobbin shield and a Jacquard machine, it is possible to weave the replacement heart valve in such a way that it no longer has be sewn together. Even the tubular structures for the blood vessels and the integrated valve function are ‘all of one piece’. Seams are always a weak point in textile medical products," Mr. Bruns adds. “Another advantage of the woven heart valve is the possibility to insert it by the help of minimally invasive surgery. Hence, the folded valve which is about the size of a tea light is to be pushed with a catheter via the bloodstream to the target position in the heart and unfolded there. The patient's chest and heart would then no longer have to be cut open”, explains prize winner Mr. Bruns.

Textile structure is similar to human tissue
A wide variety of medical products have always been produced on DORNIER weaving machines. Customers use them to produce fabrics for bandages, prostheses, blood filters and orthoses among other things. For Mathis Bruns, it is only evident that implants such as heart valves will more and more be woven on the machines from Lindau in the future. "Textile tissue is very similar to human tissue," he says. The human body consists largely of thread-like materials, just as a textile fabric is made up of thousands of individual threads. "Muscle fibres convey force impulses, nerve tracts send stimuli such as pain and brain cells convey information via thread-like dendrites and axons." Because of their ‘thread-like properties’, woven implants are therefore particularly suitable for medical applications.

15.07.2022

ANDRITZ at CINTE 2022 in China

ANDRITZ will be presenting its innovative nonwovens production solutions at CINTE 2022 in Shanghai, China (September 6–8). ANDRITZ will show its broad product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

SUSTAINABILITY IS KEY
ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

ANDRITZ will be presenting its innovative nonwovens production solutions at CINTE 2022 in Shanghai, China (September 6–8). ANDRITZ will show its broad product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

SUSTAINABILITY IS KEY
ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

NEXLINE WETLAID AXCESS TARGETS SMALLER AND MEDIUM PRODUCTION VOLUMES
The neXline wetlaid aXcess targets smaller and medium production volumes and has been devised for new and existing lines. The compact line provides an entrance to the growing wetlaid market, with a variety of final applications and options.

ANDRITZ AXCESS DEVELOPED FOR MEDIUM CAPACITIES IN WUXI, CHINA
The aXcess range was specially developed at ANDRITZ (China) Ltd. Wuxi Branch to handle medium capacities. The facility in Wuxi has an experienced platform for production and service specially geared to serve the Asian nonwovens industry. It designs and manufactures cutting-edge lines to complement the ANDRITZ aXcess product range, which includes complete lines and individual machines for air-through bonding, needlepunch and spunlace processes. With the aXcess range, ANDRITZ has developed a hybrid line combining European and Chinese machines, which is the ideal combination to obtain the best added value from each component in the line and be very flexible to accommodate different business cases.

The service organization was set up to provide prompt delivery and excellent customer support, even during the COVID-19 pandemic. A team of technicians and process experts can be deployed quickly to customer sites requiring full-range assistance. The ANDRITZ facilities include a roll service center with state of-the-art grinding equipment and a test stand for various types of rolls.

In addition, our aXcess range manufactured in Europe also offers technologies for spunlaid and wetlaid processes. Increasing production speeds and widths, compact and reliable design, and affordable investment costs are what customers look for in a competitive market environment. To meet these requirements ideally, we recently enhanced our nonwoven calender and dryer ranges.

12.07.2022

Premium Group: Sucessful restart in Berlin

The premiere of the large Premium Group event cosmos in Berlin was with a number of visitors of 70% compared to before Corona a great success. The new combination of B2B and D2C, entertainment and edutainment, fashion and culture provided a lot of exchange, new input, ideas, contacts and 360 degree inspiration.

In focus: content & communication
With the conferences FASHIONTECH, CONSCIOUS CLUB Conference and The Ground Talks, the Premium Group Team put an additional focus on communication and edutainment. Important topics such as diversity, wellbeing, metaverse and sustainability were discussed and relevant lessons learned for the market, brands and consumers.

The premiere of the large Premium Group event cosmos in Berlin was with a number of visitors of 70% compared to before Corona a great success. The new combination of B2B and D2C, entertainment and edutainment, fashion and culture provided a lot of exchange, new input, ideas, contacts and 360 degree inspiration.

In focus: content & communication
With the conferences FASHIONTECH, CONSCIOUS CLUB Conference and The Ground Talks, the Premium Group Team put an additional focus on communication and edutainment. Important topics such as diversity, wellbeing, metaverse and sustainability were discussed and relevant lessons learned for the market, brands and consumers.

“Restart was a statement!”
“It's been quite a rodeo ride putting together two B2B trade shows, one D2C festival, three conferences, parties, dinners and receptions for so many different audiences and all while the pandemic continues in full swing – barring the rain and flight chaos. I would have wished that even more visitors would have come, but overall the restart was much better than expected. It was definitely an announcement." Anita Tillmann, Managing Partner Premium Group

New togetherness, new exchange, new ideas
With the premiere of the festival for style & culture, The Ground, young consumers and Berlin communities from GenZ and GenY were part of the Premium Group event cosmos for the first time. Almost 6000 fashion enthusiasts and trade visitors came together at The Ground. Exciting conversations, interactive fire moments and cool shows created a special vibe in and around the Palais am Funkturm. The focus was on young target groups wearing, feeling and thinking. How brands can reach young customers, communicate with them and build trust and much more.

New community through 'Larger than Life Ball'
On Saturday, the day with the most visitors at The Ground, the spectacular ballroom event, the Larger than Life Ball, curated by The House of Gorgeous Gucci in the summer garden of the Palais, caused enthusiasm. Numerous stars and friends of the international LGBTQ+ scene from New York, Rio de Janeiro and Berlin celebrated a colourful open-air party for over 5 hours with cool music and live MC, sensational outfits, plateau heels and wild vogueing and dance competitions on a water catwalk.

Must have PEACE charity initiative
The must-have PEACE merch collection initiated because of the Ukraine war in favour of Be An Angel e.v. was very well received. The sale of limited-edition clothing and accessories from Carry, Closed, Drykorn, Eastpak, Lala Berlin, Lee, Le Specs, MCM, Merz b. Swans and Wranglers as well as generous donations from Boss, among others, brought in a total of almost 15,000 euros. The remaining stocks are promoted and sold via influencer accounts.

January 2023: Happy Birthday, PREMIUM!
The next Premium Group event cosmos will take place from Tuesday, January 17th to Thursday, January 19th, 2023 with a B2B focus again at the Berlin exhibition centre. The focus is on a big anniversary: the PREMIUM will be 20 years old! After the successful kick-off, the CONSCIOUS CLUB Conference will also be further developed for the next round.

The Berlin Fashion Week and Premium Group events will take place at the same time again from 2023.

Facts

  • Premium Group event cosmos
  • 2 trade shows: PREMIUM and SEEK
  • 1 festival: The Ground
  • 3 conferences: FASHIONTECH, CONSCIOUS CLUB Conference, The Ground Talks
  • More than 800 participating brands
  • 45,000 sqm total area
  • 50 talks & panels with 85 speakers
  • Newcomer brands: 230 at PREMIUM, 134 at SEEK
Source:

PREMIUM Exhibitions GmbH     

07.07.2022

Carbios, On, Patagonia, PUMA and Salomon team up to advance circularity

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 
Carbios’ innovative process constitutes a technological breakthrough for the recycling of polyester (PET) fibers, which are widely used in apparel, footwear and sportswear, on their own or together with other fibers. PET polyester is the most important fiber for the textile industry with 52 MT produced, even surpassing cotton at 23MT. The biorecycling process uses an enzyme capable of selectively extracting the polyester, recovering it to recreate a virgin fiber. This revolutionary technology makes it possible to recover the PET polyester present in all textile waste that cannot be recycled using traditional technologies.
 
PET plastics and fibers are used to make everyday consumer goods such as bottles, packaging and textiles. Today, most PET is produced from fossil resources, then used and discarded according to a wasteful linear model. By creating a circular economy from used plastics and fibers, Carbios’ biorecycling technology offers a sustainable and more responsible solution.

More information:
Carbios PET circularity
Source:

Carbios

(c) RIRI SA
05.07.2022

Riri Group’s FW 23-24 collection explores polysemic dimensions of reality

Since 85 years, Riri Group is a point of reference for the creation of details of style providing fashion brands with accessories, including zippers, buttons, metal components, and fashion jewels. Fashion is necessarily a reflection of social changes, cultural turmoil, popular aspirations, and the needs of the final customer: from these assumptions comes Riri Group’s FW 23-24 collection. The newly released collection presents two dynamic paths to explore the needs of the market targeting self-expression through style: Extreme Outverse and Fluid Glamour.

EXTREME OUTVERSE: Accessories for accessing multidimensionality
Art, space travels and the metaverse experience provide the inspiration for transparent and glossy digital prints, laser markings, use of colored paints, use of jacquard ribbon and iridescent lurex, invisible button caps, PVD finishes (rainbow, matt black), reverse coated nylon zips.

Since 85 years, Riri Group is a point of reference for the creation of details of style providing fashion brands with accessories, including zippers, buttons, metal components, and fashion jewels. Fashion is necessarily a reflection of social changes, cultural turmoil, popular aspirations, and the needs of the final customer: from these assumptions comes Riri Group’s FW 23-24 collection. The newly released collection presents two dynamic paths to explore the needs of the market targeting self-expression through style: Extreme Outverse and Fluid Glamour.

EXTREME OUTVERSE: Accessories for accessing multidimensionality
Art, space travels and the metaverse experience provide the inspiration for transparent and glossy digital prints, laser markings, use of colored paints, use of jacquard ribbon and iridescent lurex, invisible button caps, PVD finishes (rainbow, matt black), reverse coated nylon zips.

FLUID GLAMOUR: Redefine infinitely (elegance) standard
Fluid Glamour expands the processes of representing the individual in an elegant interpretation of its complexity. This concept of fluidity and uniqueness meets the new frontier of the space tourism race and intergalactic style to create futuristic atmospheres and sculptural silhouettes: rhinestones and black stones developed by Amom, wool yarns, jacquard, and a variety of tapes – metallised genuine leather and eco-leather, GOTS-certified cotton and GRS-certified recycled polyester, knitwear, white with silver lurex – that reflect the space exploration and dark desert landscapes.

Source:

RIRI SA / Menabò Group srl

05.07.2022

Stahl: Reduction of Scope 3 upstream emissions by at least 25%

Stahl, a proponent of responsible chemistry, is submitting a greenhouse gas (GHG) emissions reduction target that is aligned with the most recent guidance provided by the Science Based Targets initiative (SBTi). The new target marks a key milestone on the company’s journey toward carbon neutrality.

Stahl’s SBTi submission includes a specific commitment regarding the company’s Scope 3 upstream emissions, which Stahl aims to reduce by at least 25% over the next 10 years, compared with the base year (2021). This reduction would primarily be achieved by Stahl replacing its fossil-based raw materials with lower-carbon alternatives. The target is a major step towards the objective of limiting global warming temperature increase to 1.5°C above pre-industrial levels by 2050, as agreed at the 2015 Paris Climate Accords.
 
Stahl’s extended commitment builds on the company’s existing targets to reduce its emission for Scopes 1 and 2, which were set shortly after the Paris Agreement in 2015. Stahl has since reduced its Scope 1 and 2 (direct) GHG emissions by more than 30%, thanks to operational efficiency gains and by decarbonizing its energy supply.

Stahl, a proponent of responsible chemistry, is submitting a greenhouse gas (GHG) emissions reduction target that is aligned with the most recent guidance provided by the Science Based Targets initiative (SBTi). The new target marks a key milestone on the company’s journey toward carbon neutrality.

Stahl’s SBTi submission includes a specific commitment regarding the company’s Scope 3 upstream emissions, which Stahl aims to reduce by at least 25% over the next 10 years, compared with the base year (2021). This reduction would primarily be achieved by Stahl replacing its fossil-based raw materials with lower-carbon alternatives. The target is a major step towards the objective of limiting global warming temperature increase to 1.5°C above pre-industrial levels by 2050, as agreed at the 2015 Paris Climate Accords.
 
Stahl’s extended commitment builds on the company’s existing targets to reduce its emission for Scopes 1 and 2, which were set shortly after the Paris Agreement in 2015. Stahl has since reduced its Scope 1 and 2 (direct) GHG emissions by more than 30%, thanks to operational efficiency gains and by decarbonizing its energy supply.

Scope 3 GHG emissions cover all the additional indirect emissions that can occur in the value chain, including those associated with purchased raw materials, packaging, business travel, and transportation. Stahl’s Scope 3 emissions currently represent over 90% of its carbon footprint.

Source:

Stahl Holdings B.V.

04.07.2022

Call for Papers »BIO-raffiniert XII« 2023

The process industry today still relies primarily on fossil raw materials. A transformation towards regenerative resources, in particular renewable raw materials, is under way. In addition, circular economy, recycling and resilience play important roles in existing and new value chains. The congress "BIO-raffiniert XII", March 7 and 8, 2023 at the Fraunhofer UMSICHT in Oberhausen, takes up these topics and focuses on innovative technologies, sustainability strategies as well as logistics and supply chains. Its thematic focal points will be: Bioeconomy - Strategy and Implementation, Transformation Pathways and New Value Chains. Regional as well as international developments will be addressed.

The institute invites interested experts to present their innovations, concepts, or industrial practice solutions around the bioeconomy transformation in the context of short presentations in English (10 min presentation). The deadline for proposals outlined in a one-page abstract is: Tuesday, September 16, 2022.

Further information online.

The process industry today still relies primarily on fossil raw materials. A transformation towards regenerative resources, in particular renewable raw materials, is under way. In addition, circular economy, recycling and resilience play important roles in existing and new value chains. The congress "BIO-raffiniert XII", March 7 and 8, 2023 at the Fraunhofer UMSICHT in Oberhausen, takes up these topics and focuses on innovative technologies, sustainability strategies as well as logistics and supply chains. Its thematic focal points will be: Bioeconomy - Strategy and Implementation, Transformation Pathways and New Value Chains. Regional as well as international developments will be addressed.

The institute invites interested experts to present their innovations, concepts, or industrial practice solutions around the bioeconomy transformation in the context of short presentations in English (10 min presentation). The deadline for proposals outlined in a one-page abstract is: Tuesday, September 16, 2022.

Further information online.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

29.06.2022

Start of registrations for A+A 2023

Exhibiting companies can now register for A+A 2023! The world's leading trade fair and congress event for personal protection, occupational safety and health at work will take place in Düsseldorf from 24 to 27 October 2023.

Under the motto "People count", numerous exhibitors will present innovative solutions and concepts for safe and healthy working at A+A 2023. This time, the thematic umbrella of the international trade fair is formed by the megatrends of digitalisation and sustainability.

Decision-makers and experts will find cross-sector solutions and answers to the important questions surrounding a safe, healthy and sustainable workplace. From personal protective equipment (PPE), operational fire protection, environmental protection or disaster prevention to offers for ergonomic and healthy workplace design.

The focus will be on topics such as sustainability and the circular economy of products, digital services in the provision, care and storage of PPE, mobile working, exoskeletons (wearable robots) and wearables. Forums and side events as well as an innovative Start-up Zone complement the trade fair and set new, future-oriented impulses.

Exhibiting companies can now register for A+A 2023! The world's leading trade fair and congress event for personal protection, occupational safety and health at work will take place in Düsseldorf from 24 to 27 October 2023.

Under the motto "People count", numerous exhibitors will present innovative solutions and concepts for safe and healthy working at A+A 2023. This time, the thematic umbrella of the international trade fair is formed by the megatrends of digitalisation and sustainability.

Decision-makers and experts will find cross-sector solutions and answers to the important questions surrounding a safe, healthy and sustainable workplace. From personal protective equipment (PPE), operational fire protection, environmental protection or disaster prevention to offers for ergonomic and healthy workplace design.

The focus will be on topics such as sustainability and the circular economy of products, digital services in the provision, care and storage of PPE, mobile working, exoskeletons (wearable robots) and wearables. Forums and side events as well as an innovative Start-up Zone complement the trade fair and set new, future-oriented impulses.

For more information and registration click here.

Source:

Messe Düsseldorf GmbH

14.06.2022

AkzoNobel updates Q2 outlook based on impact of China lockdowns

AkzoNobel has updated its Q2 outlook based on the impact of the evolving business environment, including the effect of China lockdowns and the slower start to the EMEA DIY season.

Overall demand signs for paints and coatings remain robust, with North America still constrained in raw material availability and logistics, but sequentially improving. In Europe in particular, macro-economic uncertainty related to consumer confidence has increased.

Consumer demand in the Deco DIY channels in Europe – which represent 40% of total Deco EMEA revenue – got off to a slow start in Q2, subsequently impacted by inventory reductions in the DIY channel. In June, Deco DIY channel demand improved back to 2019 levels. Despite share gains and our Deco Professional business performing as anticipated, the total Q2 operating income for our Decorative Paints segment is expected to be down by approximately €50 million versus expectations entering the second quarter.

AkzoNobel has updated its Q2 outlook based on the impact of the evolving business environment, including the effect of China lockdowns and the slower start to the EMEA DIY season.

Overall demand signs for paints and coatings remain robust, with North America still constrained in raw material availability and logistics, but sequentially improving. In Europe in particular, macro-economic uncertainty related to consumer confidence has increased.

Consumer demand in the Deco DIY channels in Europe – which represent 40% of total Deco EMEA revenue – got off to a slow start in Q2, subsequently impacted by inventory reductions in the DIY channel. In June, Deco DIY channel demand improved back to 2019 levels. Despite share gains and our Deco Professional business performing as anticipated, the total Q2 operating income for our Decorative Paints segment is expected to be down by approximately €50 million versus expectations entering the second quarter.

COVID-19 lockdowns in China during Q2 impact both paints and coatings. This impact was mainly on our coatings business, while paints was able to almost offset by progressing with its geographical expansion initiatives. The re-opening in June is showing a positive rebound, but not enough to catch up on all the missed revenue in the quarter, resulting in a negative operating income impact of approximately €40 million for the quarter, versus expectations entering Q2.

AkzoNobel continues to focus on achieving its €2 billion adjusted EBITDA target for 2023, despite the volatile market environment having a material impact on the company’s Q2 2022 financials.

More information:
AkzoNobel Coatings Covid-19
Source:

AkzoNobel