From the Sector

The Enforcement Forum of ECHA agreed that the next REACH enforcement project will investigate how companies fulfil the registration, authorisation and restriction obligations for products and chemicals they import from outside the EU. The project will be done in 2023-2025 and will require close cooperation between REACH enforcement and national customs authorities in the Member States.
In its November meeting, the Enforcement Forum, responsible for harmonising the enforcement of EU chemicals legislation, agreed to focus its next project on the control of imports of substances, mixtures and articles.

This subject was triggered by high levels of non-compliance in imported goods detected in previous Forum projects, including a recent pilot project. The pilot found that 23 % of inspected products were non-compliant with requirements set by EU law and further controls are necessary.

Control of imports at the point of entry is the most effective means of checking that non-compliant substances, mixtures and articles do not enter the European market. The project will also work on further developing and strengthening existing cooperation between REACH inspectors and customs. By strengthening the control of imports, the project will also contribute to the goals of the EU’s Chemicals Strategy for Sustainability.

The Forum also agreed to publish its future advice on enforceability of new restriction proposals under REACH.

Opportunities for expanding the future role of the Forum, strengthening the control of imports and other areas were on the agenda in an open session where 41 representatives from stakeholder organisations and four candidate countries joined. Among other topics, the open session also addressed the enforceability of REACH restrictions, for example, in textiles or on the use of lead gunshot in wetlands as well as analytical methods relevant for the control of REACH duties.

The Forum’s Biocidal Products Regulation Subgroup (BPRS) re-elected Helmut de Vos (BE) for a second term as a Vice-Chair.

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

The independent jury has nominated the 100 percent biodegradable thermal insulation comfortemp® nature Lyocell HO 60x, made from Lyocell regenerated fibers, for the Textrends Award fall/winter 2024/25 season. The award is given exclusively to innovative products that are groundbreaking for the development of the textile industry. comfortemp® nature Lyocell HO 60x has a variety of extraordinary performance characteristics as a high warmth retention, bacteria inhibiting and fast drying, furthermore water repellent. High wearing comfort and the assurance of a perfect moisture balance characterize the volume fleece as ideal for the application in sportswear.

Freudenberg is presenting its entire European and global product portfolio from its "House of Sustainability" at ISPO. The "House of Sustainability" supports Freudenberg in minimizing its ecological footprint and maximizing its ecological handprint. For this purpose, the company's own manufacturing processes are designed to minimize the impact on the environment. In addition, products are developed to help customers produce more sustainably.

• Last twelve months (LTM) Core EBITDA of US$2.5B, an increase of 60% YoY
• Core EBITDA per ton of US$163 in LTM3Q22 and US$159 in 3Q22
• Operating cash flow of US$1,952 in LTM3Q22, an increase of 59% YoY
• 3Q22 Core Net Profit of THB 10.34B and Reported Net Profit of THB 8.14B

Indorama Ventures Public Company Limited (IVL) reported a resilient year-to-date performance and increasing earnings in a challenging macroeconomic environment.

IVL posted Core EBITDA of US$606 million in 3Q22, a 39% increase YoY and a decline of 20% QoQ as the strong tailwinds that drove record earnings into 2022 began to normalize in the third quarter.  

Strategic acquisitions, including Oxiteno, are bolstering IVL’s increasingly diverse geographic footprint and product portfolio, supporting earnings through volatile economic conditions. Revenue declined 10% QoQ in 3Q and grew 27% YoY as Combined PET, the largest business segment, saw steady volumes through the year, and new portfolio additions performed strongly, such as surfactants in the Integrated Oxides and Derivatives segment. With more than 70% of IVL’s platform catering to consumer daily necessities, demand remains stable.

Fibers segment posted YTD Core EBITDA of $189 million, a rise of 2% YoY. 3Q Core EBITDA increased 2% YoY, and decreased of 11% QoQ, to US$49 million. The Lifestyle fibers business continues to be impacted by the lockdown in China, while management in the Hygiene and Mobility verticals in Europe are effectively managing high energy costs.

Combined PET (CPET) segment achieved YTD Core EBITDA of US$1,192 million, an increase of 42% YoY. Core EBITDA in 3Q22 rose 27% YoY to US$327 million, and declined 24% QoQ, as business remained steady across operations apart from in Europe where peak energy prices continue to put pressure on demand and margins.

D K Agarwal, CEO of Indorama Ventures, said, “We are pleased with our performance across the business cycle. Our management is working hard to extract the advantages that we enjoy in terms of geographic leadership, product diversity, and an unmatched customer base of global household brands. Together with our habitual lens on cost management, these actions will help us to weather the economic challenges and continue to focus on our long-term potential.”

Das TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V. lädt in der Reihe „RUDOLSTÄDTER KUNSTSTOFFTAGE“ am 24. November 2022 zum Workshop „Lyocell 2022 – nachhaltig, regional, kreislauffähig“ ein. Anmeldeschluss ist der 18. November 2022.

Es werden die Anforderungen an moderne Faserstoffe und Textiltechnologien diskutiert und dargelegt, wie der Lyocell-Prozess eine nachhaltige und zirkuläre Textilwirtschaft auch in regionalen Geschäftsmodellen ermöglicht. Dies ist umso bedeutsamer, da ab 2025 europaweit die Verpflichtung zur Rücknahme und Verwertung von Alttextilien gilt.

Der eintägige Workshop gibt Einblicke in die Vielfalt an alternativen Zellstoffen - inklusive Nutzung landwirtschaftlicher Reststoffe oder von chemisch recycelten, pre- oder post-konsumen Textilabfällen. Referenten aus Industrie und Forschung sprechen über die neuesten Entwicklungen der Branche. Darüber hinaus besteht die Möglichkeit, Labore und Technika zu besuchen und sich fachlich auszutauschen.

The Gleaming line by the Marchi & Fildi Group includes a wide range of metalloplastic yarns for the most varied of uses. Reflex, the new range of reflective yarns, will join the line.

In addition to uses in the worlds of fashion and furnishings, for fancy yarns, decoration and accessories, an important application for the Gleaming collection is in the sector of technical clothing with high-visibility features.

Reflex, used for the production of fabrics and tapes, able to reflect the light and ensure good visibility for people wearing them in low-light situations, is augmented by new colour shades in addition to the traditional greys.

The innovative reflective yarns in white, black, and light and dark multicolours offer new possibilities for:

• tapes, external labels and accessories;
• technical fabrics for work clothing with specific safety standards;
• uniforms, sports clothing and accessories;
• hosiery, gloves, bibs and hats for night use, for winter clothing and for northern markets.

The latest addition to the range, with an important functionality, is the Reflex stretch yarn, which, apart from in the sectors described above, also finds application in flat bed or circular knitting and sewing. Its composition makes it softer and more versatile in comparison to traditional reflectives.

The Gleaming line represents a completion of the range of yarns produced by the Marchi & Fildi Group. The yarns are available in various thicknesses, widths and types in both metallised and transparent versions, and iridescent, reflective and phosphorescent effects. Also articles are included with particular features of resistance to chemical and dyeing treatments.

Amongst the most recent innovations is the line of metalloplastic yarns in 100% polyester obtained from post-consumer recycling with GRS (Global Recycle Standard) certification.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

• DITF beteiligt sich am internationalen Konsortium zum Kunststoffrecycling ‚WhiteCycle‘

Ein Konsortium aus 16 öffentlichen und privatwirtschaftlichen Organisationen hat sich unter dem Namen ‚WhiteCycle‘ zusammengeschlossen, um ein umfassendes und geschlossenes Recyclingsystem für Plastikabfälle zu etablieren. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) werden als Teil des Konsortiums ihren Beitrag mit einem neuen Syntheseverfahren zur Verarbeitung von recycelten Kunststoffen leisten.

Unter Leitung der Michelin Group Frankreich konstituierte sich das Konsortium ‚WhiteCycle‘ Anfang Juli 2022. Ziel der europäischen Initiative ist es, einen Wirtschaftskreislauf zu etablieren, um inhomogene Textilabfälle aus verschiedenen Materialien aufzubereiten und daraus neue, hochwertige Produkte herzustellen. Dieses Vorhaben soll dazu beitragen, die von der Europäischen Union gesteckten Ziele bei der Reduktion von CO₂-Emissionen bis zum Jahr 2030 zu erreichen.

Komplex aufgebaute, textilhaltige PET-Abfälle wie Reifen, Schläuche oder mehrlagige Verbundtextilien aus dem Bekleidungsbereich sind bisher schwer oder gar nicht recycelbar. Unter dem WhiteCycle-Netzwerk werden mehrere Projekte und Forschungsansätze zusammengeführt, die sich des Problems annehmen und neue Lösungsansätze liefern sollen.

Die DITF werden ein bestehendes PET-Syntheseverfahren an neuartige recycelte Monomere anpassen. Das zu bewältigende Problem besteht in den Verunreinigungen im Ausgangsmaterial, die durch dessen inhomogene Zusammensetzung bedingt sind.

Zusammen mit dem Projektpartner Kordsa Teknik Textil A.S. (Türkei) entwickeln die DITF neue Syntheserezepte. Sie haben zum Ziel, mögliche Nachteile abzustellen, die durch verbleibende Verunreinigung der Monomere zustande kommen. Denn trotz einer Reinigung der Monomere vor deren Weiterverarbeitung können nicht alle Verunreinigungen entfernt werden. Die Ansätze, die dabei verfolgt werden, sind anspruchsvoll. So müssen Art und Menge der verwendeten Zusatzstoffe spezifisch angepasst werden. Dazu gehören Katalysatoren, Verarbeitungshilfsmittel, Nukleierungs- und Kupplungsmittel sowie Kettenverlängerer. Auf diese Weise ist es möglich, die negativen Auswirkungen von unbekannten Verunreinigungen zu vermeiden. Damit verbessern sich die Materialeigenschaften der wiederverwerteten Kunststoffe, da sie langfristig thermisch stabilisiert werden, was wiederum in einer Verbesserung der mechanischen und rheologischen Eigenschaften resultiert. Das modifizierte Verfahren soll es ermöglichen, dass recyceltes PET (r-PET) die gleichen Eigenschaften wie virgin PET aufweist.

Die Konsortialpartner verfolgen andere Ansätze, um eine verbesserte Recyclingrate und hochwertigere r-PET-Produkte zu erzeugen: Optimierte Sortiertechnologien für die sortenreine Trennung von Abfällen gehören ebenso dazu wie eine enzymbasierte Behandlung von Kunststoffen, um sie auf nachhaltigem Weg in Monomere aufzuspalten. Letztlich wird auch die hochqualitative Fertigung neuer Produkte aus den recycelten Kunststoffen dazu beitragen, den Rohstoffkreislauf zu schließen.