From the Sector

A broad coalition of industry organizations and labor unions, representing a broad spectrum of manufacturers and workers who stepped up to make essential personal protective equipment (PPE) throughout the COVID-19 pandemic, sent a letter to Senate Majority Leader Chuck Schumer (D-NY) and Senate Minority Leader Mitch McConnell (R-KY) expressing strong support for the inclusion of robust domestic procurement policies for PPE in the U.S. Innovation and Competition Act (USICA) currently being considered by the Senate.

See the coalition’s full letter here.

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

The conference program for Monday, 10th May:
The programme will begin with exciting presentations on glass chemistry and fibres. A talk by Dr Anne Berthereau (Owens Corning Composites) on the race for always higher modulus glass fibres will be followed by a talk from Dr Hong Li (Nippon Electric Glass) on the potential of new high-strength and high-modulus glass fibres.
After two further presentations on high modulus and bioactive glass fibres from Muawia Dafir and Julia Eichhorn (TU Bergakademie Freiberg), we will learn about furnace efficiency as well as process monitoring and digitalisation in glass fibre production from René Meulemann (CelSian), Hans Gedon (Gedonsoft) and Julius Golovatchev (Incotelogy) respectively.
A presentation by Felix Quintero Martínez (Universidade de Vigo) will explore a novel method to produce ultra-flexible glass nanofibers.
The afternoon will continue with two presentations by Dr Christina Scheffler (Leibniz-Institut für Polymerforschung Dresden e.V. (IPF)) and Professor James Thomason (University of Strathclyde) in the field of glass fibre sizings and fibre-matrix interfaces. Finally, a closing presentation by Steve Bassetti (Michelman) will conclude the first day of the Symposium.

The entire conference programme is available on the website https://aachen-fibres.com/aachen-reinforced/general-information.
To register for the Symposium, use the following link: https://aachen-fibres.com/aachen-reinforced/registration

The antimicrobial protection of Sanitized® T 99-19 against the SARS-CoV-2 virus has been confirmed by independent labs in France (basis: ISO 18184:2019).

Textile and polymer products with Sanitized® antimicrobial treatment have been used in hygiene-sensitive areas for many years. For textiles, Sanitized® T 99-19 is a patented technology based on a silane-ammonia compound, a globally proven product. Its hygiene function is used in workwear and protective clothing for nursing staff, bed linen or mattresses in hotels, nursing care facilities and hospitals. Polyester goods for precisely these areas of application can now not only be antimicrobial, but also reliably protective against SARS CoV-2.

The antiviral efficacy (99.84 %) of the Sanitized® T 99-19 product has been officially confirmed by tests conducted by external labs.

Tests on end products, which were additionally carried out by textile manufacturers, also prove the effectiveness of Sanitized® T 99-19 against SARS CoV-2. License partners praise this confidence-building benefit of the end products. SANITIZED license partners receive concrete support in terms of marketing and legal aspects (health claims).

Avoid legal pitfalls when claiming antiviral protection
Advice and support for customers in achieving optimal hygiene protection for their products are an integral part of SANITIZED services. A claim guide has therefore been developed especially for products that protect against COVID-19.
https://www.sanitized.com/de/protection-against-covid-19-which-antiviral-advertising-claimsare-legal-sanitized-explains/

The dates are set: IFFT/Interior Lifestyle Living is welcoming exhibitor registration for its 2021 edition, to be held from 18 – 20 October 2021 in the South Halls of Tokyo Big Sight. The dedicated fair for interior design is once again set to attract not only retail buyers but also visitors from design and architecture offices, commercial facilities, and other contract businesses. The 2019 edition welcomed 352 exhibitors from 14 countries and regions as well as 16,016 visitors from 34 countries and regions, receiving much positive feedback for its increased focus on contract business.
 
IFFT/Interior Lifestyle Living 2019
Returning after a hiatus in 2020 due to the COVID-19 pandemic, IFFT/Interior Lifestyle Living will once again create opportunities for exhibitors to meet new clients and expand their businesses. Messe Frankfurt Japan Ltd is working to put all of the appropriate safety and hygiene measures in place to protect participants during the fair period, and prevent the spread of COVID-19.
 
New ETHICAL zone added to satisfy consumer demand
A newly introduced ETHICAL zone will help industry players explore the themes of sustainability and ecology, which are continuing to gain traction in the interior design market. The zone focuses on environmental protection, up-cycling, fair trade, products that support people with disabilities, organic products, local production for local consumption, and more. Furniture production from recycled forest materials will also be a focus of the zone, which will be promoted in the run up to the fair through sector-specific media channels. This will include dedicated promotional activities targeting ethically driven retailers and restaurants.
 
A variety of booth sizes to accommodate exhibitors’ needs
In response to requests from exhibitors who showcase smaller items, a new booth size has been added for 2021. Measuring 6.3 sqm (width 3m x depth 2.1m), the new booth option is one size smaller than the existing 9 sqm booth, adding more choice for exhibitors
 
Dedicated lifestyle themed zones
Proving popular amongst trade buyers during previous editions, ‘CREATIVE RESOURCE’ is a zone devoted to innovative interior materials, as well as parts and services for interior design and home remodelling. Products featured at the zone include wallpaper, floor coverings, paints and related materials. First introduced in 2012, the zone has grown in stature as the destination for the likes of manufacturers, architects, designers and developers to find inspiration.
 
The fair’s zoning encompasses a variety of different product categories and themes. This not only simplifies the sourcing process for trade buyers, but it also maximises business exposure for exhibitors. Day-to-day lifestyle products – both stylish and functional – will be displayed in the ‘HOME’, ‘ACCENT’ and ‘EVERYDAY’ zones with a focus on living spaces, accessories and household items respectively.
 
Moreover, catering to the world of convenience and home cuisine, an array of pragmatically-designed packaged food will be presented at 'FOODIST', while innovative dining items will be gathered at the ‘KITCHEN LIFE’ zone.
 
Highlighting high quality local craftsmanship, designs from Japanese artisanal artists with a modern touch will be located in the ‘JAPAN STYLE’ zone. The latest designs from highly acclaimed international brands will be displayed too, in the ‘MOVEMENT’ area, while work from up-and-coming young designers will appear at the ‘TALENTS’ and ‘NEXT’ zones.
 
About IFFT/Interior Lifestyle Living
IFFT/Interior Lifestyle Living is held annually in fall and is the sister fair of Interior Lifestyle Tokyo held in spring, which is based on Ambiente, Messe Frankfurt’s largest and most important international consumer goods fair, and Heimtextil, the biggest international home and contract textiles fair. With the synergetic effects of these leading global trade fairs in the high-end interior market, and with Messe Frankfurt’s global network, IFFT/Interior Lifestyle Living is a key platform for professionals, buyers, architects and those engaged in domestic and international contract business.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement today on the White House announcement that President Biden will sign an executive order today, “ensuring the future of America is Made in America by all of America’s workers.”  Further, NCTO launched a new industry video campaign today that outlines steps the Biden administration and Congress must take to re-shore the production of personal protective equipment (PPE) and the entire supply chain for critical products. The video can be found here: MakeAmericanPPE.

National Council of Textile Organizations President and CEO Kim Glas said:
“We commend President Biden for taking action in his first days in office to strengthen our domestic supply chain and manufacturing base with a “Made in America” executive order directing the federal government to spend taxpayer dollars on American-made goods produced by American workers using American-made components.

Increasing the domestic procurement threshold and the price preferences for domestic goods under the current Buy American law will bolster domestic production and stimulate more investment in U.S. manufacturing.

We believe it is critical that taxpayer dollars are used to invest in American manufacturing and our workforce. It is essential that we close loopholes in our Buy America laws, expand application and product coverage of domestic content rules, and close unnecessary contract waivers that undermine American manufacturing and its workforce.
 
We look forward to working with the Biden administration and Congress on immediately strengthening our domestic procurement laws. The COVID-19 crisis was exacerbated when foreign supply chains broke down leaving our frontline workers vulnerable, underscoring the vital need for America to manufacture essential medical products at home. We look forward to working with the Biden administration on implementing this Executive Order, and with members of Congress to push critical bipartisan legislation to help ensure this onshoring effort is fully realized.

We also sincerely thank Senator Sherrod Brown (D-OH) and Representative Kathy Manning (D-NC) for their leadership in sending a recent letter to President Biden, requesting the president prioritize “Made in America” personal protective equipment (PPE) purchases and outlining key steps the administration can take to produce and procure quality American-made PPE for frontline workers.”

An impairment charge has become necessary based on the current status of the new 5 year plan.

(Market Abuse Regulation N° 596/2014)
•    Impairment loss amounting to €80-100 million in the fourth quarter 2020 in the business unit CFM
•    Restructuring program resolved with savings target of more than €100 million until 2023
•    Guidance 2020 for Group sales and operating recurring Group EBIT confirmed
•    Guidance 2020 for net result reduced to minus €130-150 million

In the current status of the 5 year plan, which is at present under preparation, significant deviations have already become apparent today, particularly in the market segments Automotive, Aerospace and Wind Energy in the business unit Composites – Fibers & Materials (CFM). Partially also due to the pandemic, Automotive and Aerospace is developing slower than anticipated in the last 5 year plan. In contrast, business with Wind Energy is growing much stronger than previously planned. These changes in the product mix lead to lower mid-term earnings at CFM compared to the prior 5 year plan. Following these deviations from the last 5 year plan, an event-driven impairment test was undertaken. This results in a non-cash impairment charge amounting to €80-100 million, which will be recorded in the fourth quarter 2020.

The Board of Management of SGL Carbon SE today also resolved the implementation of a restructuring program, with which the Company is targeting savings of more than €100 million until 2023 (compared to the base year 2019). These savings consist of a planned socially compatible reduction in personnel of more than 500 employees and substantial reduction in indirect spend, particularly in the areas of travel, consulting and external services. Costs of approximately €40 million are anticipated for the implementation of this restructuring program. A little more than half of this is expected to be recorded as expenses in the fourth quarter 2020, while the associated cash outflows are mainly forecasted for 2021.

This requires a partial adjustment of the guidance for 2020. The solid operational development in the third quarter 2020 with Group sales between €220 and €230 million and operating recurring EBIT1 between €13 and €15 million (plus approximately €9 million positive one-time effects) is within the framework of our expectations for the full year 2020. However, the Group net result is likely to develop below the prior year level of minus €90 million and reach approximately between minus €130 and €150 million due to the restructuring provisions as well as the impairment charge (prior guidance: improvement to a negative low double-digit million € amount).

With liquidity of €167 million as of September 30, 2020 (compared to €137 million at year-end 2019) and further cash inflows in the fourth quarter 2020 from successfully implemented additional funding measures, the Company’s position is solid. This liquidity is more than sufficient for the payment of the purchase price for SGL Composites USA in the amount of USD 62 million at the end of 2020 as well as the restructuring-related cash outflows expected mainly in 2021. The Company continues to have access to the revolving credit facility (RCF) in the amount of €175 million, which remains undrawn.

The quarterly statement as of September 30, 2020 will be published on November 12, 2020 as scheduled. Further details on the new 5 year plan as well as the guidance on the fiscal year 2021 will be presented with the publication of the Annual Report 2020 on March 25, 2021.

*The use of KPIs in this notification is aligned to the annual report 2019 and the interim report for the first half year 2020. There were no changes to the scope of consolidation or to valuation methods compared to the previous guidance.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here. 

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

The previously communicated targets for 2020 are unlikely to be achieved due to the COVID-19 pandemic

The Board of Management of SGL Carbon SE determined today, that the forecasted results for the fiscal year 2020 are unlikely to be achieved due to the global COVID-19 pandemic. In light of the substantial uncertainty regarding the duration and the consequences of the COVID-19 pandemic, the Board of Management is currently unable to provide a reliable sales revenue and earnings forecast for the current year. Consequently, the guidance for 2020 is suspended. 

The previous expectation, which guided for a slightly lower sales revenue und a recurring EBIT1 approximately 10-15% below the prior year (sales revenue 2019: €1,087m; recurring EBIT 2019: €48m), was already made conditional by the Board of Management in the management report published on March 12, 2020, that negative effects from the coronavirus were not included, as the outbreak at that time was mainly restricted to China and Italy. In the meantime, numerous other governments have introduced far-reaching measures with substantial limitations on the public and economic sectors and leading economists now forecast significant reductions in economic output in key economies. 

The Board of Management of SGL Carbon has introduced and partially already implemented comprehensive measures to reduce the cost base and to secure liquidity. These measures include the introduction of short-time work, reduction of material and indirect spend, as well as further reduction resp. postponement of capital expenditures. In addition, we are exploring further financing options independent of the capital markets, some of which are already in preparation. The Company is intensively working on identifying and mitigating potential risks.