From the Sector

• Anita Tillmann, managing partner, about Premium Group´s January 2021 Events

“These are challenging times – for all of us. On one hand, because we can't meet up in the same carefree way as usual. And, on the other hand, because decisions have to be made based on factors that are out of everyone’s control. Alongside all this, it’s essential that we look to the future with positivity, that we use the time effectively and continue to advance in the face of adversity. This not only affects the trade show and event organisers, but the whole industry.

We have carried out market research and surveyed exhibitors, partners and buyers on the current circumstances. The objective was to obtain a data-based assessment of the current economic situation, a summary of the success of the exclusively digital events, and insights into the requirements of our network with regard to the physical trade shows. Following analysis of the data gathered we have established that there is a personal wish for an event to happen – inclusive of the appropriate hygiene measures – however, this is unfortunately not currently possible from a professional perspective. As long as there are delays to production and constantly changing travel and contact restrictions in place, we cannot put on any trade shows, conferences or events that would meet our demands or the demands of our exhibitors.

We have therefore decided not to hold PREMIUM, SEEK or FASHIONTECH next January. This was an incredibly difficult decision to make. Especially because we didn't want to say goodbye to Berlin without a fitting farewell.

Now, though, it’s about looking forward and concentrating on what is certain: Frankfurt Fashion Week, which we will be staging in July 2021 together with Messe Frankfurt, the City of Frankfurt and the region of Hessen. We have big plans and are working on a new, fresh start – not only for us, but also for all stakeholders in the fashion industry, nationally and internationally.

Another press conference is planned for the end of November, when we shall be introducing new concepts, partners and event formats. Preparations are already in full swing: we are having numerous discussions, sitting in workshops, activating partners, designers, publishers, politics and society so as to get a unique, fully formed event successfully up and running. Expectations are huge – and we intend to satisfy them. We are putting all our energy into this future-focussed project.

With the aim of being able to share our enthusiasm, we are planning a FFW Preview to present the new locations in Frankfurt am Main and the concepts to journalists, brands and retailers at the beginning of next year.

Until then, all we can say is this: stay curious. Stay optimistic. Because even though there won't be any events this coming January, the show does go on. True to form, that means there will be more business opportunities than ever before, along with innovative formats, events and conferences and a fully formed city concept that has never been imagined before.”

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

“Our innovations aim to help mills improve their productivity and competitiveness while also contributing to the textile industry’s shift to more sustainable practices and a reduced environmental footprint,” said Kerim Oner, Global Marketing Manager, Huntsman Textile Effects. “With ERIOPON® E3-SAVE, we have harnessed the unparalleled technical expertise and application know-how of our research and field teams to develop a product that is proven to reduce costs for mills and that meets current and anticipated industry sustainability standards.”

Dae Young Textile Vietnam Co., Ltd, a forerunner in sustainable textile production in Asia, was an early adopter of the ERIOPON® technology. Results from bulk production show that ERIOPON® E3-SAVE has reduced process time by over 20 percent and water consumption by over 50 percent, delivering annual cost savings of up to 30 percent.

“ERIOPON® E3-SAVE delivers a combination of best-in-class performance and value. It allows us to have the shortest possible processing cycle, which is key for us to deal with increasing industry pressure for faster turnarounds,” Jeong Won Oh, General Manager, Dae Young Textile Vietnam, said. “Alongside dramatic time savings, we are also saving water, energy and ultimately cost. Huntsman’s best-in-class products and high level of technical support help keep businesses like us productive.”

This unique polymer technology of ERIOPON® E3-SAVE promotes controlled exhaustion to ensure right-first-time level dyeing. It extracts oil and oil-based impurities from the fiber during processing and displays a high affinity to disperse dyes, enabling the rapid removal of unfixed surface dyes from the fiber during reduction clearing. The technology also enhances reproducibility and improves wet- and rub-fastness.

ERIOPON® E3-SAVE saves time, water, energy and cost in polyester dyeing by combining pre-scouring, dyeing and reduction clearing in a single bath. An advanced multi-action dyeing auxiliary in the dyEvolutionTM range, it delivers environmental and economic sustainability.

• The quality of Sappi’s Algro Design Advanced solid bleached board makes the difference for Wolford

The unique combination of physical and optical features combined within the Algro Design range of products, convinced the textile manufacturer, Wolford, to use the range to package its innovative face mask. When creating the packaging solution for its ‘Care Mask’ the company chose to combine the premium 350 gsm Algro Design Advanced solid bleached board with extremely challenging ink covering and a number of finishing options. The end result is a packaging solution that is as elegant as it is creative and as a result, perfectly complements the product inside.

• Premium packaging for premium products
• Perfect for complex graphic applications
• Unique service from the innovation leader Sappi

Wolford, founded in Bregenz, Austria, in 1950, is the global market leader in skinwear ‘made in Europe’. Since its establishment, the company has come up with numerous product innovations and is always at the cutting edge. Even before the coronavirus pandemic hit Europe, product developers were considering the idea of launching their own face mask protection, having witnessed the effects of the coronavirus SARS-CoV-2 in Asia. Thanks to an outstanding, highly efficient development division, a new product, ‘Care Mask’, was quickly brought to market.

It meets the high-quality standards of Wolford and consists of a premium, soft, breathable material that ensures high wearing comfort. Wolford is particularly proud that such a high-quality product could be developed in just a few weeks, despite reduced working hours and staff working from home. It generally takes some time to progress from development to product maturity. In this case however, everything was ready for market launch within two weeks.

Top quality meets top quality

Alongside the product, Wolford developed an appropriate packaging solution for their high-quality product, in collaboration with their in-house graphics department. To enable the ‘Care Mask’ to be quickly launched, a suitable material needed to be found, which could meet Wolford’s high standards in terms of quality, appearance and feel.
 
Wolford’s long-term partner, Sappi Europe had the perfect solution right away with its 350 g/m2 Algro Design Advanced solid bleached board. Thanks to its double-coated top and lightly coated back, the material from the innovation leader is a perfect choice for premium packaging.

The high brightness and silky, soft touch of the paperboard gives the packaging a premium, exclusive look and feel. The colour brilliance of Algro Design Advanced and the continuous, precise reproduction of complex print motifs were exactly what Wolford was looking for and met the high standards of the brand. Thanks to its additional outstanding finishing and processing properties, further processing with grooves, hot-foil embossing, paint finishes and adhesives was also easily achievable, which made it perfect for Wolford’s needs.

Service comes first at Sappi

Product capability alone was not enough for this venture however. To allow Wolford to achieve their goal of two weeks from inception to market ready, they also required a highly responsive service level from their trusted partner and Sappi responded at every level.  From selecting the right quality and size to the precise delivery of the paperboard to the printers, all in the space of five days, Sappi was flexible and immediately ready to respond. Thanks in no small part to the proactive support provided by all contributors to the creative process, the ‘Care Mask’ was launched at the end of March 2020 and was a resounding success. 5,000 masks were sold out within an hour and were sent on their way to the customers in their exclusive packaging.

• Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
   

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

• Since the end of March 2020, COVID-19 has led to very low demand in all Business Groups
• Comprehensive crisis management implemented
• Loss in the mid double-digit million range expected in the first half of 2020
• Plans to introduce short-time working to adjust capacity in Switzerland and Germany
• Strategy will continue to be implemented

Due to COVID-19, a large number of spinning mills have stopped production worldwide. Since the end of March 2020, this has led to low demand for spare parts and wear & tear parts and delays in testing programs during the development of new machines. Customers are postponing investment projects or unable to implement them due to restrictions imposed by national governments. This results in low demand for new machines.

Comprehensive crisis management
Rieter has implemented comprehensive crisis management. Priorities are being given to protecting employees, fulfilling customer commitments and ensuring liquidity. The necessary measures to protect employees have been implemented worldwide.
The order backlog of well in excess of CHF 500 million is being processed largely according to plan, despite the existing bottlenecks in the supply chains. Less than 5% of the orders in the order backlog have been canceled.
Rieter has already implemented measures to ensure liquidity and reduce costs. The company has good net liquidity and undrawn credit lines in the mid three-digit million range.
Loss expected in the first half of 2020
As already reported, Rieter expects sales and earnings in the first half of 2020 to be significantly below the prior year level.

Loss expected in the first half of 2020
As already reported, Rieter expects sales and earnings in the first half of 2020 to be significantly below the prior year level. The effects of COVID-19 will place an additional burden on the first half of 2020. Rieter therefore expects sales in the first half of 2020 to be less than CHF 300 million. Despite the countermeasures implemented at the net profit level, this will lead to a loss in the mid double-digit million range.

Plans to introduce short-time working to adjust capacity
Rieter plans to apply for short-time working for the areas with forecasted low capacity utilization at the locations in Switzerland and Germany. The application will be for 40% short-time working in the third quarter of 2020. Talks with staff representatives will begin next week.
As a sign of solidarity, Rieter’s Board of Directors, Group Executive Committee and the senior management will waive 10%-20% of their salaries temporarily.

Implementation of the strategy
In recent years, Rieter has consistently implemented the strategy based on innovation leadership, strengthening the business in components, spare parts and services and the adjustment of cost structures. The company intends to forge ahead with the implementation of the strategy in the coming months, thus strengthening its market position for the time after the COVID-19 pandemic.
The next information on the course of business is planned with the publication of the half-year results on July 16, 2020
 

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement, urging the government to institute Buy American policy changes to help bolster U.S. manufacturers producing personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic.

“If the government is sincere about reconstituting a U.S. production chain for medical personal protective equipment (PPE) to resolve the drastic shortages we are experiencing during the current pandemic, it is going to have to make key policy changes to help incentivize domestic production. A strong Buy American mandate for these vital healthcare materials needs to be instituted for all federal agencies, coupled with other reasonable production incentives, to help ensure a strong U.S.  manufacturing base for these essential products.

Our government already has an existing example of such a mandate that serves as an excellent model. The U.S. Department of Defense operates under a fiber-to-finished product Buy American rule for military textiles. This rule ensures that the vital textile materials our U.S. warfighters depend upon, come from a secure domestic production chain that cannot be severed during a military emergency by offshore entities.

There is a bipartisan call for action as members of Congress on both sides of the aisle have begun to acknowledge the need for these types of reasonable and essential policy changes.

Anything short of fully instituting domestic purchase requirements through Executive Order and other legislative initiatives will ensure that PPE production through U.S. supply chains that have been created overnight don’t evaporate as soon as this crisis is over.  

In the midst of the crisis, our failure to confront this challenge will allow for a repeat of the sins of the past that allowed sourcing agents to offshore the entire production of medical PPE in search of lucrative profits. While chasing the lowest cost import may have seemed cost effective at the time, these past few months have demonstrated that we paid a deadly price through this approach by jeopardizing the very lives of frontline medical personnel that are fighting the pandemic.   

This is a national security issue. It’s also a vital healthcare issue and it is decision time for U.S. policymakers. If our country is to be prepared for future deadly pandemics such as the one it is now facing, reasonable policy changes need to be implemented to ensure that we strengthen our domestic supply chain to address America’s security, safety and healthcare requirements.”

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

In mid-March, CHT Germany GmbH, which specializes in specialty chemicals, took up production and distribution of hand disinfectant. Now the company is expanding its product portfolio by adding important medical supplies that can help fight Covid-19 (SARS-CoV-2). Starting immediately, CHT is providing its business customers with surface disinfectant, textile supplies for medical protective wear as well as supplies for test kits and face masks.

Following increased demand for disinfectant in the wake of the new coronavirus, the CHT Group began already a month and a half ago to produce hand disinfectant at its factory in Dußlingen. Since then, more of its factories around the world had joined in. Now the CHT Group is complementing this offering by producing its own surface disinfectant based on ethanol. As with the hand disinfectant, the production of the surface disinfectant received a special approval, based on the expanded general ruling by the German Federal Agency  for Chemicals (BAuA). Both types of disinfectant use publicly available standard formulas for alcohol-based disinfectant from the World Health Organization (WHO). The sale of CHT’s surface disinfectant, which is available in 5-, 10- and 30-liter canisters, is exclusively for use by industry customers.

In addition, the CHT Group is manufacturing a range of textile-relevant products that provide protection from Covid-19. These include functional supplies for face masks for medical protective wear, as well as flocking for test kits. Through these offerings, the CHT Group also wants to support the textile sector, which has been strongly affected by the crisis.

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

The FDA has determined that spun synthetic swabs can be used in COVID-19 testing based on the results from a clinical investigation stemming from its collaboration with UnitedHealth Group, the Gates Foundation and Quantigen.  

This is the second major COVID-19 relief project that Parkdale has helped. Earlier Parkdale constructed a supply chain that includes Hanes, Fruit of the Loom, and many other U.S. companies in the production of PPE masks needed by frontline medical staff treating the virus.

• Antiviral properties of Sanitized® products on synthetics validated

Tests conducted by independent laboratories have now confirmed that a treatment with Sanitized® T 99-19 and Sanitized® T 11-15 reduces the viral load on PES textiles by
up to 99 %.

Swiss company SANITIZED AG announces the validation from impartial labs that Sanitized®T 99-19 and Sanitized®T 11-15 are also effective against viruses (in accordance with ISO 18184:2019). Tests were performed using a feline coronavirus with structures and mechanisms reminiscent of SARS-Cov2. Patented technology featuring an ammonium silicate compound  is employed in Sanitized®T 99-19 and Sanitized®T 11-15 utilizes tried and tested silver technology.

These additives are the perfect tool for an antiviral and antibacterial treatment of face masks, protective professional medical clothing, bed linens, or mattresses. The formulation of both products remains completely untouched, thus ensuring that it will continue to offer outstanding protection against bacteria.

Before a final product’s antiviral properties can be publicly promoted, viral tests must be performed in specialized laboratories. Compliance with local legal regulations is essential here. SANITIZED AG explicitly points out that this is standard procedure and has composed a preliminary Guide for Treating PPE (personal protective equipment) with biocide products.

Guide Link: https://campaign.sanitized.com/en/treatment-of-ppe-with-biocidal-products

Elevate Textiles, a global provider of advanced, high quality products and mission critical textile solutions is pleased to participate in the recently launched Gerber PPE Task Force. This industry-wide effort combines resources and expertise to support manufacturing operations and brands as they increase their production or transition their operations to produce personal protective equipment in the fight against COVID-19.
Elevate’s Burlington, American & Efird (A&E), and Gütermann brands provide critical barrier fabric and thread components used in the manufacturing of lifesaving PPE products including masks, isolation gowns and other medical garments.

"The only way to be successful during this difficult situation is to join forces and support one another," said Lenny Marano, VP of Product Management & Marketing for Automation Systems at Gerber Technology. "We are proud to have a global network of partners to support PPE production so that it's more widely available."

For over 40 years, Burlington has been in the Medical business manufacturing fabrics for use in operating theaters such as surgeon’s gowns, isolation gowns, sterilization wrapper packs, drapes, scrubs and lab coats. The Maxima® collection of fabrics is useful for reusable isolation and surgical gowns and meets AAMI standards for Levels 1-4 and FDA standards.