From the Sector

• Sustainability and security combined:
• RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

The Germany-based research consultancy PTS tested a range of Checkpoint labels. PTS analysed the labels, which were different sizes and materials, to ensure that following the standard kerbside recycling process, the recycled, fibre-based material would be of acceptable quality. Each label was applied to a piece of cartonboard to simulate a real-world scenario and the results show that all are classified as being recyclable in accordance with current regulations. All labels – including the 410 RF, 2928 RF and 4210 RF labels – achieved an excellent overall recyclability rate of over 94%.

Sustainability is essential

With brands making strong commitments to sustainability – including investing in more environmentally friendly forms of packaging like cartonboard – and consumers increasingly demonstrating their preferences for sustainable packaging it is pivotal that anything applied to an item – at any point along the supply chain or in-store – does not affect the recyclability of its packaging.

Security labels play a vital role in ensuring products remain available to purchase. Retailers have been using a diverse range of labels to protect their merchandise, working with suppliers to ‘tag’ items at source or relying on store associates to apply labels in-store. As one of the largest suppliers of RF-based Electronic Article Surveillance (EAS) labels globally, Checkpoint’s labels are applied to millions of products, which are packaged in different materials. Typically, when recycled, packaging labels tend to end up in a combination of different rubbish and recycling streams, depending on the packaging material and the consumer commitment to recycling.

Until today, the recyclability of these labels has been relatively unknown. It means that retailers and consumers could inadvertently be contaminating the paper-based packaging recycling stream with millions of security labels – still attached to packaging which could have otherwise been recycled up to 25 times.

“Security labels play an important role in helping retailers protect their profits, but it is vital they don’t stop packaging from being recycled. We are delighted to have achieved this accreditation from PTS that shows our labels can be recycled through the existing kerbside collections. It means that brands and retailers can be assured they are not negatively affecting a country’s recycling rate, while also knowing their customers can conveniently dispose of the entire pack, packaging material and label, in the same household recycling bin. Our labels passed all of PTS’ stringent tests meaning they have little to no impact on the recyclability of a piece of cartonboard packaging." 

Production and care, logistics and agriculture – people in these and many other industries work hard day after day. Exoskeletons offer them enormous relief in this regard. And in rehabilitation, these innovative "power suits" help patients expand their motor capabilities and extend their mobility. The central component of the exoskeleton is elastic narrow textiles.

Every gram counts
Exoskeletons also require lightweight components. And every gram counts here. Textiles are particularly light materials in themselves and JUMBO-Textil's elastics are also suitable for replacing heavier parts made of or containing plastic or metal. For example, they replace springs, buckles or other fasteners.

Good for your back – and your skin
Exoskeletons need skin-friendly components. Depending on the model and ambient temperature, exoskeletons are also worn directly on the skin. This is why JUMBO-Textil does not compromise when it comes to wearing comfort: whether elasticated hook-and-loop belts or slip-proof woven tapes, the surface of the textiles is pleasantly soft. And to prevent moisture accumulating, the textiles are always permeable to air. They are free from harmful substances and meet OEKO-TEX Standard 100 PK1.

Innovative production technology – complex textile architecture
Exoskeletons need safe and stable components. JUMBO-Textil's production technology is always state-of-the-art. This allows for very different, and complex stable textile structures – from elastic buttonhole braids to multi-branched elastic hole cords.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

• High performing face stock paper delivers convincing results for multiple applications
• Sappi product portfolio of face stock papers ist being expanded with Parade Label SG from its Gratkorn site

Sappi, manufacturer of numerous packaging and speciality papers for a wide range of markets, is launching the Parade Label SG, a one-side coated face stock label paper that excels in terms of properties such as printability, opacity and stiffness, as well as with its many options for further processing.

• Semi-gloss face stock paper with high-quality performance characteristics
• Suitable for a wide range of applications, e.g. labels for food, non-food, HABA and VIP
• Available in 77, 78 and 80 gsm
• Manufactured in Gratkorn, one of the largest and ultra-modern paper mills in Europe

Sappi offers an extensive range of base papers for wet-glue and self-adhesive labels. With its new Parade Label SG, the company is now introducing a one-side coated, semi-gloss face stock label paper that is approved for direct contact with food and that complies with DIN EN 71 for toy safety. The range of applications includes labels for food, non-food, beverages and health and beauty aids (HABA), as well as for logistics and variable information printing (VIP) due to its excellent thermal transfer printability.

The fibre-based face stock solution guarantees high-quality results in printing and finishing, through the entire production and converting chain. It features high stiffness and resilience, so the label will not be damaged and will fit accurately even after labelling.

Sappi invests in customer proximity
To ensure 100 percent availability and fast delivery of its label papers, Sappi has proactively positioned itself for the future and set the course for reliable production and seamless supply chains – with its plants in Alfeld, Carmignano and Condino. The plant in Gratkorn, where Sappi has invested in new technical equipment, has now been added to the list. With modern production facilities, from paper machines to finishing technology, as well as extensive expertise in the production of coated papers, the site has everything in place to ensure top-class products. Available capacity is being expanded gradually to include the production of Parade Label papers alongside existing graphical grades.

Because of the central location of Sappi’s production site in Gratkorn, Parade Label SG can be supplied quickly throughout Europe and beyond. The short transportation distances save greenhouse emissions and protect the environment; shorter production cycles then enable good availability and fast supply. Parade Label SG is certified for direct food contact and available in grammages of 77, 78 and 80 g/m². Sappi can provide Parade Label SG with FSC or PEFC certificates on request.

Sappi will be presenting its new developments in the field of label papers, among others, at the upcoming LabelExpo Europe in Brussels in April 2022.

Freudenberg Performance Materials Apparel Europe started construction work on its competence center for finishing and coating base material for the apparel industry at its site in Sant´Omero (Italy) as scheduled in December. Further processing of base material is to begin in Italy in early 2023. The Weinheim site will then become the competence center for interlining base material.

In January 2021, Freudenberg Performance Materials Apparel Europe (Freudenberg) announced plans to set up two competence centers. In future, the company will concentrate on manufacturing base material for interlinings at the Weinheim location. Base material finishing and coating is to be bundled at Sant´Omero. For this purpose, production plant will be relocated from Weinheim to Sant´Omero and recommissioned in a newly-built production hall.

The traditional groundbreaking ceremony with senior representatives from local authorities and Freudenberg management was cancelled due to the high number of coronavirus cases in the area.

The AVK – Industrievereinigung Verstärkte Kunststoffe – has once again presented its Innovation Awards to companies, institutes and their partners. Three composites innovations were recognised in each of the three categories – “Innovative Products/Applications”, “Innovative Processes” and “Research and Science” – at the new event JEC Forum DACH on 23 November 2021, the first edition of which was held in Frankfurt.

“As usual, the submissions included a lot of very interesting and promising products and processes this year. The Innovation Awards highlight the outstanding efficiency, cost-effectiveness and sustainability of fibre-reinforced plastics as well as the companies and institutes operating in the sector,” explains Dr. Elmar Witten, Managing Director of the AVK. The jury of leading experts from the industry honoured the following innovations this year:

Category “Research and Science”
First place in the “Research and Science” category was awarded to the German Aerospace Center (DLR) for its Bondline Control Technology (BCT). This innovative process is used for quality control and assurance of bonded joints. The core element is a porous fabric which is applied to a joining surface using an epoxy adhesive or matrix resin. Peeling away the fabric creates a chemically reactive and undercut surface and can also be used as a test to check adhesion to the substrate. BCT has potential in a variety of possible applications. For example, peel ply can be replaced by BCT fabric to produce composite components with an optimised joining surface. The cost-effective BCT peel test is suitable for coupon testing and process control. In addition, the combined adhesion test and surface pre-treatment can be used for quality assurance of bonded repairs on fibre composite structures.

Second place was taken by the Institute of Textile Technology (ITA) at RWTH Aachen University and its partners AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR with “StoneBlade – Lightweight construction with granite for the wind industry”. This innovation enables manufacturers to reduce the amount of non-recyclable materials used in rotor blade construction. At the same time, it reduces the weight of these components and improves the mechanical properties relating to the stability of wind turbines. The innovative approach replaces glass-fibre reinforced plastic in the blade components with hard rock – a natural, cost-effective and recyclable lightweight material. The slabs of rock are cut and ground to a thickness of just a few millimetres and embedded in a fibre composite laminate with carbon fibre, which stabilises them for alternating load cases. The pre-stressed material is pressure-stable in the composite and can absorb tensile forces in the event of continuously alternating loads without any loss of stiffness.

Third place went to the Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK) with its partner Mercedes Benz AG for the interdisciplinary development of a highly integrated inductive charging module for electric vehicles. The ultra-thin charging module was designed to make optimum use of space in the vehicle underbody without reducing ground clearance. An interdisciplinary approach was adopted for the development process. This involved the electrical, mechanical and process characterisation of high-frequency Litz wires, ferromagnetic foil and metal wire cloth as well as the creation of a simulation model. The result is a demonstrator for a charging system with a structural height of 15 mm and a total weight of 8 kg. It achieves a transmission efficiency of up to 92 percent at 7.2 kW nominal power and active air cooling. The hardware demonstrator was fabricated in a 3-step process using RTM and VARI techniques.

Overview of all the winners in the three categories:
Category “Innovative Products/Applications”
1st Place: “Traffic signs from Nabasco (N-BMC)” – Nabasco Products BV and Lorenz Kunststofftechnik GmbH, partners: Pol Heteren BV and NPSP BV
2nd Place: “Novel, ultratough vinyl ester resin for the construction of large marine vessels” Evonik Operations GmbH
3rd Place: “Air intake housing with a multi-material design for gas turbines” – MAN Energy Solutions SE, Leichtbau-Zentrum Sachsen GmbH and Leichtbau-Systemtechnologien KORROPOL GmbH.
Category “Innovative Processes”
1st Place: “In-mould wrapping” off-tool, film-coated, fibre composite components for exterior applications – BMW Group, Partner: Renolit SE
2nd Place: “Adaptive automated repair of composite structural components in the aviation sector” – Lufthansa Technik AG, Partner: iSAM AG
3rd Place: “Automated surface pre-treatment using VUV excimer lamps” – CTC GmbH
Category “Research and Science”
1st Place: “Bondline Control Technology (BCT)” – German Aerospace Center (DLR)
2nd Place: “StoneBlade – Lightweight construction with granite for the wind industry” – Institute of Textile Technology at RWTH Aachen University, Partners: AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR
3rd Place: “Interdisciplinary development of a highly integrated inductive charging module for electric vehicles” – Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK), Partner: Mercedes Benz AG

Submissions for the next Innovation Award can be made from the end of January 2022.

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

The conjunction between the physical exhibition and the online business matchmaking platform will make way to a wider range of networking. Local and international visitors who are unable to attend the venue will be able to witness the exhibition virtually through the ‘MFI virtual app’ which will host live knowledge sessions and product demonstrations for visitors. The two-day multimodal trade fair allows the visitors to search for specific products like fibers, yarns, nonwovens, machinery, coated textiles with easy-to-use filters further to which they can share their query or connect directly with the respective exhibitors.

At the same time, visitors attending the venue will be welcomed under a well-organised physical exhibition following the government-authorised safety protocols of ‘MFI SafeConnect’. These protocols will enable visitors to engage in secure face-to-face interactions with exhibitors and witness the latest technical textile technologies and innovations in-person.

Alliance with the Government of Tamil Nadu
In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021. Furthermore, technical textile players from Tamil Nadu such as Cyber Textiles India Pvt Ltd, Jayashree Spun Bond, Lenzing Ag India, Liester Technologies, Loyal Textile Mills Ltd, Milltex Engineers Pvt Ltd, Superfil Products Pvt Ltd, Uster Technologies (India) Pvt Ltd have also confirmed their participation for the exhibition.
Announcing a close co-operation with Messe Frankfurt India for the 2021 edition, Ms Pooja Kulkarni, IAS MD & CEO, Guidance Tamil Nadu, stated: “While there are several inherent advantages for the growth of technical textiles in Tamil Nadu specifically, many raw materials used in the production of sanitary products, artificial ligaments, seat belt webbings, airbags are still heavily imported. In this context, the alliance with Techtextil India Forum can help us reduce import dependency and bring investments in R&D, manufacturing, innovation by partnering with global technical textiles companies.”

With 50% of India’s textile mills in Tamil Nadu and complementary clusters of knitting, weaving and medical devices manufacturing in Coimbatore, and Tiruppur, the region provides immense opportunities for Meditech investments. Two petrochemical and refinery units – One in Cuddalore and another in Nagapattinam by CPCL is in the process of being established in Tamil Nadu. These units will enable availability of MMF raw material for the textile industry across the state. Hence, manufacturing in Tamil Nadu can be a win-win arrangement for investors as India provides access to the burgeoning market as well.

International expertise with German pavilion
Techtexil India 2021 edition will feature an exclusive German Pavilion showcasing products and technologies from top German manufacturers, including Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement welcoming House passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for face masks, isolation gowns and other personal protective equipment (PPE).

“We commend the House for getting the bipartisan infrastructure bill across the finish line today, and we are pleased the legislation will now go to President Biden for his signature. This is the first step in a long-term strategy that is critically needed to permanently onshore PPE production to ensure our nation is prepared for the next health security crisis,” said NCTO President and CEO Kim Glas. “This infrastructure package will help incentivize the reshoring of PPE production by guaranteeing long-term federal contracts and expanding Berry Amendment rules to more federal agencies’ purchases of PPE products, important priorities of the U.S. textile industry.”

NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant (containing 100 percent domestic content); guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

• DiloGroup looks forward to participating in the Techtextil India show 2021.

DiloGroup offers tailor-made production systems from one supplier and will inform at this forum in the German pavillon about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts.

The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products. The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

With more than 370 installations delivered to the nonwovens industry worldwide, DiloGroup has the necessary know-how and the complete equipment portfolio to engineer the perfect production line for any product specification. The efficiency of Dilo production lines is the result of long-term research work and experience. Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.