From the Sector

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Similar energy savings can be achieved with the Novara precision finishing system which utilises a nozzle array to deliver finishing chemistry with millimetre resolution. Finishing chemistries penetrate deeply into the fabric due to the combination of high velocity liquid jetting and precisely-controlled vacuum and textile finishes are applied only where needed, reducing chemistry usage and enabling multi-functionality.

In the past year, Alchemie, backed by Swedish fashion giant H&M, has established a first demonstration hub at customer JSRTEX in Taiwan. It is now progressing plans to set up further centres at customer sites around the world.

• Sales of CHF 1 510.9 million,
• Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
• EBIT margin of 2.1%
• Implementation of action plan to increase profitability ongoing
• Dividend of CHF 1.50 per share proposed

With record sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

Order intake was CHF 1 157.3 million in 2022 (2021: CHF 2 225.7 million) and thus remained at a high level thanks to the company’s technological lead and broad international presence. The market situation, especially in the second half of 2022, was characterized by investment restraint and below-average capacity utilization at spinning mills due to geopolitical uncertainties, rising financing costs, and consumer reticence in important markets.
The company had an order backlog of around CHF 1 540 million at the end of 2022, which thus extends into 2023 and 2024.

The profit at the EBIT level in the 2022 financial year was CHF 32.2 million (2021: CHF 47.6 million). The result was strongly influenced by substantial cost increases, which could only be offset in part through price increases or other remedial measures. In addition, to compensate for material shortages, expenses were incurred in connection with the development of alternative solutions, and in relation to the acquired businesses.

Completion of the Acquisition
Rieter consolidated the acquired automatic winding machine business with effect from April 1, 2022. This acquisition completes Rieter’s system offering in the largest market segment of ring and compact spinning, thus significantly strengthening the company’s market position.

Action Plan to Increase Profitability
Implementation of the action plan to increase profitability is ongoing. With regard to the margins for the order backlog, which remains high, the already implemented price increases in combination with a positive trend in costs, particularly in logistics, are having a favorable impact. In addition, progress was made in eliminating material bottlenecks and reducing expenses for the three acquired businesses.

Dividend
The Board of Directors proposes to the shareholders the distribution of a dividend of CHF 1.50 per share for 2022. This corresponds to a payout ratio of 56%.

Outlook
For the coming months, Rieter expects below-average demand for new equipment at first, with a revival expected in the second half of 2023 after ITMA, the leading trade fair in Milan (Italy). Rieter also believes that demand for consumables, wear & tear and spare parts will recover during 2023.
For the 2023 financial year, due to the high order backlog, Rieter anticipates sales in the order of magnitude of the previous year.
The realization of sales from the order backlog continues to be associated with risks in connection with the ongoing geopolitical uncertainties, rising financing costs, continuing bottlenecks in the supply chains, and possible, currently unforeseeable consequences of the earthquake in Türkiye in February 2023. Despite the price increases already implemented, further global cost increases continue to pose a risk to the growth of profitability. Rieter will specify the outlook in the 2023 semi-annual report.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

ACIMIT president Alessandro Zucchi stated that, “The orders index data for the fourth quarter confirms what had already been observed in the previous quarters in 2022. After a sharp increase in 2021, this decrease in orders for the past year is physiological. Furthermore, the ongoing war between Russia and Ukraine, with its related consequences on daily business and trade, and a macroeconomic framework in which uncertainty prevails, have further negatively affected the orders intake.”

Data for the last quarter does not suggest a reverse in the negative trend for the first months of 2023. Declining energy prices and inflation, although still high, also declining slightly are, however, signs of a light improvement in the business of companies in the sector as well. “We need to look to the current year with optimism,” continued ACIMIT president. “Our member companies are already focusing on ITMA, the upcoming global textile machinery industry trade fair, that will be held from June 8-14 in Milan.” “I am confident that ITMA Milan can represent an opportunity for further development of the Italian textile machinery sector,” concluded Zucchi. “The technological innovations that our manufacturers will bring to the trade show will meet the textile industry’s need to be increasingly sustainable, both environmentally and economically.”

Art meets sustainable fashion in the third edition of the project "CirculART", the initiative that sees companies, artists and fashion designers working together with Cittadellarte - Fondazione Pistoletto, showing how new balanced forms of production, design and sharing can be explored through a careful choice of materials and of sustainable supply chains. Three key concepts underpin the circularity of sustainable fashion and therefore this project: Reduce - reducing the consumption of raw materials, Reuse - reuse of raw materials, Recycling - regeneration.

The project CirculART is conceived and developed in collaboration between Fashion B.E.S.T. and UNIDEE Residency Programs, and led by the Foundation's team of curators.

Fashion B.E.S.T. - Better Ethical Sustainable Think-Tank, Cittadellarte - Fondazione Pistoletto’ sustainable fashion office, was created by artist Michelangelo Pistoletto and Franca Sozzani. Since 2009, B.E.S.T. has been working on the development of sustainability in the textile sector, to lead to a contamination between art, which assumes social responsibility, and the world of fashion, which is looking to define a new ethical and sustainable model.

CirculART proposes a new link between fashion and art, engaging both in a conscious and innovative combination of sustainability, sensitivity, beauty and union. The project links territory and production factories, bringing together actors from the different sectors making up the textile supply chain that work on the basis of a circular economy with companies that have chosen to embrace the ideal of sustainability and develop an innovative business model.

The protagonists of this year’s edition are two international artists and two international fashion designers, selected through an open call launched by Cittadellarte: Augustina Bottoni, Lucia Chain, Huge Sillytoe and Rebecca Sforzani, young talents called upon to create a work with fabrics produced by partner companies, focusing on dialogue and on the enhancement of the textile industry production chain.

In early 2023, the programme will give the four selected artists the opportunity to visit and work actively with the partner companies that have joined the initiative.
These are: Achille Pinto S.p.a, manufacturer of textiles and textile accessories for the main international fashion brands; Albini Group, Europe's largest manufacturer of cotton fabrics for shirts; Erica Industria Tessile, a leading company in the creation of textile prints, original and customised designs; Filatura Astro, eco-sustainable regenerated yarns; G2B S.r.l., a chemical and environmental analysis laboratory working with vertical cultivation from which indigo is obtained; Lampo by Ditta Giovanni Lanfranchi S.p.A., leader in the creation and production of zips for fashion; Lanificio Fratelli Cerruti, a Biella-based weaver for haute couture; Lenzing, world leader in the production of fabrics made from fibres derived from renewable wood raw material; Milior, a producer of high quality fabrics; Officina +39 – Chemistry plus creativity, a chemical company with thirty years' experience dedicated to research and chemical application in textiles; Tessuti di Sondrio, a factory inspired by the century-old local textile tradition of processing cotton, linen, hemp and wool; Tintoria Emiliana, garment-dyed production and sustainable practices; Zegna Baruffa Lane Borgosesia, a manufacturer of 100% Made in Italy fine combed and carded yarns.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

As pioneer of seam-free WHOLEGARMENT® knitting, SHIMA SEIKI has been setting the standard almost exclusively with nearly 30 years of experience in complete garment technology. Now that benchmark has been raised once again with its new SWG-XR® flagship WHOLEGARMENT® knitting machine. SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle®. SWG-XR® features a renewed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series. SWG-XR® sets new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting.

A new proposal in WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in ultrafine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 92, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

The 11^th edition of India ITME 2022, a textile engineering and technology B2B Exhibition, was hosted in IEML, Greater Noida, U.P. under participation from 68 countries. It showcased more than 1600  Live machinery and unveiled 69 new products.

After a gap of six years, the event recorded a high flow of quality visitors - approx. 87,400 unique visitors - which included industry members, technocrats, academicians, students and government officials apart from the delegations from 13 countries lead by senior officials of respective country who are looking to engage with India as sourcing and trade partner for developing their textile industry.

The high-profile technology & engineering exhibition for textiles witnessed participation from leading Indian institutes for textile engineering such as VJTI Mumbai, DKTE Ichalkaranji where MOU’s were signed for knowledge exchange with Swiss Textile Machinery Association and Italian Textile Machinery Association, paving way for collaboration not only in business but also in technical education.

The six-day event carried forward its theme “Empowering Textile Through Technology” encouraging indigenously developed innovations and research by Indian companies.

The six-day event set the foundation for upgradation and modernization of the textile industry of India which is the 2nd largest employment generation sector after agriculture.

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

•  EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
• Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
• One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
• Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.

• Building Leadership Position in Luxury Market

Oerlikon announced that it has signed a definitive agreement to acquire Riri, a leading provider of coated metal accessories for the luxury fashion industry. This transaction marks a milestone in Oerlikon’s growth strategy and diversifies Surface Solutions’ offerings and market access. The transaction is expected to close in the first quarter 2023, subject to regulatory approvals and standard closing conditions.

“Riri is highly complementary to our existing luxury business and will reinforce our fashion jewelry and metallic components for leather goods. It is the ideal next step after our acquisition of Coeurdor in 2021 and will make us a market leader and an integrated provider with a complete offering of coated luxury metalware for high-end fashion brands,” said Michael Suess, Executive Chairman, Oerlikon. “The acquisition will drive cross-selling and strengthen our footprint in the global luxury metalware market, which sees mid- to-high single-digit growth rates annually.”

“Our portfolio, particularly in zippers and buttons, is an excellent fit to Oerlikon’s strengths in coated metal-based fashion components. Together, we are ideally positioned in Italy and France – the two major European fashion hubs – and can provide a complete offering to fashion customers,” said Renato Usoni, CEO, Riri. “We are excited to join Oerlikon as it will allow us to accelerate the luxury goods industry’s sustainability transition to greener technology by applying technologies such as Oerlikon’s PVD¹.”

Riri, headquartered in Mendrisio, Switzerland, is a market leader in metal accessories manufacturing, with a wide product range and unique offering. The company supplies global leading brands in the luxury fashion industry and has a strong foothold in the Italian luxury market. The company has more than 1 100 employees and expects to generate sales of EUR ~170 million (CHF ~165 million) in 2022.

¹ PVD, or physical vapor deposition, coating is a thin-film coating solution that is more environmentally friendly than traditional processes such as chrome plating.

The 11^th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

Groz-Beckert will also be demonstrating its competence as a system supplier in the field of warp knitting at the India ITME. The warp knitting machine needles and system parts from Groz-Beckert are precisely matched to one another and achieve a uniform and flawless warp knitting process.

With the WarpMasterPlus and the KnotMaster, the Weaving product division presents the latest generation of drawing-in and knotting machines from Groz-Beckert. They are particularly distinguished by their ease of operation and flexibility.

The product area Felting (Nonwovens) presents its product and service highlights for the nonwovens industry. These include the HyTec P jet strip for spunlace customers as well as the GEBECON felting needle, the dur needle, EcoStar felting needle and the Groz-Beckert customer product. The HyTec P-nozzle strip is characterized by improved handling and higher hardness. The patented GEBECON felting needle offers an improved surface finish and optimized breakage bending properties.

The Carding product area will present its further developments for the spinning industry. These include the new stationary flat series, the TV56 revolving top and the cylinder wire set with special tooth geometry. The new stationary flat series is characterized by an innovative tooth geometry and a new type of tooth distribution. The new TV56  revolving top with its new setting pattern and 560 points per square inch is particularly easy to clean. The improved cylinder wire convinces with its special and patented tooth shape, which has a positive effect on the maintenance effort. This makes it particularly suitable for quality-oriented cotton spinning mills producing high-quality yarns. Visitors can also look forward to the new InLine card clothing series for the nonwovens sector.

In the Sewing exhibition area, the focus is on technical textiles – in particular the manufacture of car seats. The answer to the high demands of sewing car seats is the special application needle SAN® 5.2 from Groz-Beckert. The special geometry gives it sufficient stability. The double groove at the point improves thread guidance and leads to a uniform seam pattern, especially in multidirectional sewing processes. The scarf chamfer on both sides of the needle prevent skipped stitches and optimize loop formation. The wear protection is increased by the titanium nitride coating GEBEDUR. In addition, the quality management INH will be exhibited and the functions and contents of the customer portal will be presented.