From the Sector

• Guidelines of the EU Commission to implement the Single-Use Plastics Directive have been published
• Uniform labelling obligation for wipes and feminine hygiene products containing plastics as of July 03, 2021
• Lenzing’s wood-based, biodegradable VEOCEL™ branded fibers as a sustainable alternative to plastic

The Lenzing Group welcomes the issuance of the guidelines for the implementation of the Single-Use Plastics Directive (EU) 2019/904, which took effect on June 05, 2019¹. In these guidelines, the EU Commission specifies which products fall within the scope of the directive, thus providing clarity in the joint fight of the EU member states against environmental pollution from plastic waste. Lenzing’s wood-based, biodegradable cellulosic fibers such as those of the VEOCEL™ brand comprise a sustainable and innovative solution to this man-made problem.

Uniform labelling rules for some single-use plastic products
The Commission implementing regulation (EU) 2020/2151 applying to the Single-Use Plastics Directive stipulate uniform labelling requirements for some of the single-use plastic products on the packaging or the product itself starting on July 03, 2021. They encompass feminine hygiene products and wet wipes for personal and household care containing plastic.

Consumers want sustainable hygiene products
Even before the implementation of the Single-Use Plastics Directive, Lenzing already gives consumers clear guidance in their purchasing decisions. Products bearing the VEOCEL™ brand logo on their packaging are produced in line with stringent certification criteria. As a consequence, consumers can be assured that the products contain biodegradable, cellulosic materials.

A Marketagent survey carried out in German-speaking Europe in October 2019² concluded that nine out of ten consumers would immediately change their purchasing behavior for wipes if they found out that their current product contains plastic. This would seem to imply that new market dynamics will emerge once the labelling rules for single-use plastic products takes effect. According to a Smithers Report³, about 500,000 tons of petroleum-based fibers are used each year for the production of wipes.

¹ Directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment
² Representative Marketagent Online survey, n = 1,005 (14 - 69 years old, from Austria and Germany). https://itsinourhands.com/
³ Smithers Report “The Future of Global Nonwoven Wipes to 2023”, published in 2018, page 23, reference year 2018

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HonG KonG) LTD., will participate in the ITMA Asia + CITME 2020 exhibition to be held at the national Exhibition and Convention Center in Shanghai, China in June.

Through its exhibit theme—Step Beyond—SHIMA SEIKI will present its vision of the future, while addressing a variety of solutions for the new normal, including proposals in Factory Automation, Digital Transformation (DX), and various online solutions.

At ITMA Asia SHIMA SEIKI will be making proposals for factory automation centered around the special manufacturing capabilities of our WHOLEGARMENT® knitting machines. WHOLEGARMENT® knitwear can be knit in one entire piece without the need for linking or sewing, and allows for on-demand knitting. SHIMA SEIKI will present its WHOLEGARMENT® knitting technology in the form of two of the latest machines. The flagship MACH2XS is the one of most advanced flat knitting machines, featuring proprietary four-needle bed and Slideneedle™ technology combined with spring-type moveable sinkers and i-DSCS+DTC® Digital Stitch Control System with Intelligence and Dynamic Tension Control, and capable of all-needle knitting of WHOLEGARMENT® items. MACH2XS is presented in ultrafine 18L gauge, shown for the first time in China. Also shown for the first time in China, MACH2VS, a flexible V-bed machine capable of knitting WHOLEGARMENT® knitwear using every other needle, or conventional shaped knitting using all needles. It also features spring-type moveable sinkers and i-DSCS+DTC® Digital Stitch Control System with Intelligence and Dynamic Tension Control. MACH2VS is presented in ultrafine 18G with auto yarn carriers as a prototype option.

ITMA Asia will also be the occasion for a sneak preview of next-Generation 4-bed WHOLEGARMENT® knitting technology. The new machine is named SWG-XR, adopting the SWG moniker from the first-generation WHOLEGARMENT® knitting machine introduced back in 1995. The "X" represents 4 needle beds arranged in an Xshaped formation as per the original SWG-X machine, while "R" stands for Reborn and Revolution, referring to a renewal of SHIMA SEIKI's WHOLEGARMENT® knitting that raises the technology to unprecedented levels. By increasing the number of systems from 3 to 4 and featuring auto yarn carriers, SWG-XR allows even higher productivity and vastly improved range of knitting.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI has released three new online services over the past year which will also be showcased at ITMA Asia: 'APEXFiz™' subscription-based design software; 'yarnbank ™' digital yarn sourcing web service; and 'SHIMAnAVI™' e-learning service.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

Laying the bases for a more sustainable world, adopting responsible strategies is no longer an option but an indispensable and compulsory structural revolution today and for the future to come. This topic is the subject of the Smart Voice "The Circular Stories of C.L.A.S.S.: the journey of Bemberg™ by Asahi Kasei towards a smart, responsible and contemporary luxury" organised by C.L.A.S.S. eco hub that has taken place on Thursday 27th May at 4 pm CET. 4 unique and complimentary design realities has been sharing  the  Bemberg ™ choice as unique and precious fibre ingredient that gives rise to a performing design incorporating new generation values, for their unique paths of style and fashion to offer to the contemporary consumer.

Specialist and expert of innovative fibres, during the session Ettore Pellegrini, Marketing & Sales Manager-Marketing & Sales Manager Asahi Kasei Fibers Italia, illustrated the history of Bemberg™ starting from its origins to nowadays, reporting its various applications that have been then illustrated in their uniqueness by the speakers of the session.

Paolo Verdoia, Lining research and development raw materials at Ermenegildo Zegna, who has been involved in the development of accessory raw materials for the Ermenegildo Zegna Group for 14 years. During the digital meeting he talked about priority collaborations with responsible and high quality materials such as Bemberg™, the brand's approach to sustainability and future projects.

The session has also been attended by new generation designer Gilberto Calzolari winner of C.L.A.S.S. ICON 2020, who used Bemberg™ in his latest AW 2021-22 collection entitled "At this stage".

Camilla Carrara, founder and zero-waste designer Zerobarracento says "We select Bemberg™ for our creations for two fundamental reasons: firstly, from a stylistic point of view for its extreme versatility: in the various collections we have adopted it to create Kimonos, padded jackets, wrap dresses as well as for the interiors of our garments, which are intended to be soft embraces for total physical and mental comfort. The second but no less important reason is that this fibre has circular values in line with our zero-waste commitment."

“By choosing to work with Bemberg™, we have made an exclusive and sustainable choice in order to offer tailors, designers, brands and garment manufacturers who believe in and are committed to responsible but at the same time premium and exclusive fashion a new business opportunity" says Alessandro Ivaldi Director Business Unit of Carnet, a division of Ratti Group that produces and distributes worldwide fabrics for the creation of made-to-measure garments for men and women.

• New air purification and sulfur recovery plant up and running at the Lenzing facility
• Another step closer to meeting sustainability and climate targets
• Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

“As a result of this investment, Lenzing has made further progress towards implementing its climate targets, while achieving much greater autonomy with regard to one of its core raw materials”, says Christian Skilich, Member of the Managing Board at Lenzing Group.

In 2019, Lenzing set the strategic target of halving its group-wide greenhouse gas emissions per ton of product by 2030. Its goal for 2050 is to achieve climate neutrality.

"ROICA™ new identity is the ultimate upgrade and milestone of the brand’s evolution path which brings together and merges performance, innovation and responsible imprint. ROICA™ strategic commitment is built on two main pillars that meet value driven consumer’s expectations: first, continuous R&D and innovation activities focusing on new contemporary stretch functionalities with the highest integration of sustainability. Second, developing synergies and partnerships with leading responsible innovators throughout the whole value chain from throwsters down to consumers, people and companies sharing the same goals", declares Shinichiro Haga, Senior Executive Manager of ROICA Division.

ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Balanced geometries, calibrating color and different anatomical details: the visual identity is then declined in 5 different designs, each for one of the 5 applications that can be enhanced by ROICA™ yarns: ACTIVATION for performative sportswear garments, AQUA for smooth swimwear, STYLE#FIT for casual wear and athleisure, ESSENTIALS for next to skin lingerie and underwear and LEGWEAR for stylish hosiery. A complete wardrobe.

The company also created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family for complete transparency and transparent authentic communication.

Constant investments in R&D, people and technology allowed the company to engineer agile, multi-facetted and sustainable stretch yarns which redefine the new circularity, delivering the style, support and finish, trusted to match the performance demands and ambitions of the new generation contemporary consumer.

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

Archroma announces a successful first year on the U.S. home care market with its whiteness solutions for laundry and detergents.

Archroma acquired in December 2019 the BASF's stilbene-based optical brightening agents (OBA) business for liquid and powder laundry detergent applications. The acquisition included the OBA technology, portfolio and manufacturing unit at Ankleshwar, India.

Since then, Archroma has mobilized its global experts, technologies and know-how, to design a holistic solutions portfolio for household, industrial & institutional cleaning (HI&I) aimed to support detergent manufacturers.

The portfolio now includes solutions for whiteness, coloration, stain removal, fabric softening, as well as sequestering agents and surfactants, which can be used in applications such as multipurpose cleaning powders, detergent powders, dish wash tablets and liquids, laundry liquids and fabric softeners, and hard surface cleaners.

Archroma used its experience working with manufacturers and brands in the textile industry to enter the US detergent markets for the very first time, and has been able to gain a significant position with most key laundry detergent manufacturers with its solutions for whiteness.

In particular, the company reports special interest from U.S. detergent brands and manufacturers for its Leucophor® 5BMGX, as this optical brightener allows them to achieve high levels of whiteness with a blueish undertone. The product is also highly soluble in water and stable in oxidative environment.

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

• Order intake of around CHF 300 million received in the month of April 2021
• Order intake in the first half of 2021 expected to be around CHF 800 million
• Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.