From the Sector

Reset
1028 results
Lenzing is on the path to climate-neutral production (c) Lenzing AG
27.05.2021

Lenzing is on the path to climate-neutral production

  • New air purification and sulfur recovery plant up and running at the Lenzing facility
  • Another step closer to meeting sustainability and climate targets
  • Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

  • New air purification and sulfur recovery plant up and running at the Lenzing facility
  • Another step closer to meeting sustainability and climate targets
  • Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

“As a result of this investment, Lenzing has made further progress towards implementing its climate targets, while achieving much greater autonomy with regard to one of its core raw materials”, says Christian Skilich, Member of the Managing Board at Lenzing Group.

In 2019, Lenzing set the strategic target of halving its group-wide greenhouse gas emissions per ton of product by 2030. Its goal for 2050 is to achieve climate neutrality.

Source:

Lenzing AG

27.05.2021

PERFORMANCE DAYS: Successful Digital Fair Week

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

Another extremely popular and particularly well-attended attraction was the 3D FORUM, which tested hand-selected fabrics for their material properties as part of the digital fair week, to be visualized ultimately as a 3D scan.
Also for the spring/summer 2023 season, the jury presented two awards for outstanding fabrics – so in addition to the presentation of the PERFORMANCE AWARD, won by Trenchant Textiles, the ECO PERFORMANCE AWARD was presented to the winner, Utenos Trikotazas.

Professional, versatile and informative: Program with Expert Talks
A total of 17 live talks from 30+ speakers followed by a question-and-answer session, under the guidance of moderator and freelancer Astrid Schlüchter, formed the basis of the digital fair supporting program from May 17 to 19. All talks, webinars and panel discussions are available on demand via THE LOOP platform.

The PERFORMANCE DAYS Team has once again succeeded in providing the industry with an almost real trade fair experience despite being held digitally. Via the Digital Fair Platform, which was activated explicitly for the trade fair week, trade fair visitors can enter into interactive exchange, including matchmaking and networking activities.

The premiere of the Functional Textiles Shanghai by PERFORMANCE DAYS fair takes place in Shanghai in September 28-29 as well as in Portland in October 27-28, 2021, with the planned hybrid event in Munich scheduled for December 1 and 2, 2021.

Source:

PERFORMANCE DAYS

26.05.2021

We aRe Spin Dye signs collaboration agreement with Hugo Boss

We aRe Spin Dye (WRSD) AB (publ) (“WRSD”) enters into a collaboration agreement with the international premium brand, Hugo Boss.

Hugo Boss has a clear agenda for how they will gradually become even more sustainable. One of the company's intermediate goals is to have reduced total water consumption by 40% by 2025 - where WRSD is expected to be involved and contribute with competence and technology. The long term goal for Hugo Boss is to be completely climate neutral by 2050.

In November, Hugo Boss Ag entered the Dow Jones Sustainability Index (DJSI) World for the fourth year in a row. Hugo Boss is thus one of the four companies in the textile, clothing and luxury segment that have qualified for the index this year. Hugo Boss is also listed in the Dow Jones Sustainability Index (DJSI) Europe for the first time. In the assessment carried out by S&P Global, HUGO BOSS improved significantly compared with the previous year and received, among other things, the assessment “best in class” in several categories.

We aRe Spin Dye (WRSD) AB (publ) (“WRSD”) enters into a collaboration agreement with the international premium brand, Hugo Boss.

Hugo Boss has a clear agenda for how they will gradually become even more sustainable. One of the company's intermediate goals is to have reduced total water consumption by 40% by 2025 - where WRSD is expected to be involved and contribute with competence and technology. The long term goal for Hugo Boss is to be completely climate neutral by 2050.

In November, Hugo Boss Ag entered the Dow Jones Sustainability Index (DJSI) World for the fourth year in a row. Hugo Boss is thus one of the four companies in the textile, clothing and luxury segment that have qualified for the index this year. Hugo Boss is also listed in the Dow Jones Sustainability Index (DJSI) Europe for the first time. In the assessment carried out by S&P Global, HUGO BOSS improved significantly compared with the previous year and received, among other things, the assessment “best in class” in several categories.

Source:

We aRe Spin Dye 

ROICA™ by Asahi Kasei turns 50 and  unveils its new visual identity (c) ROICA, Asahi Kasei Corporation
25.05.2021

ROICA™ by Asahi Kasei turns 50 and unveils its new visual identity

"ROICA™ new identity is the ultimate upgrade and milestone of the brand’s evolution path which brings together and merges performance, innovation and responsible imprint. ROICA™ strategic commitment is built on two main pillars that meet value driven consumer’s expectations: first, continuous R&D and innovation activities focusing on new contemporary stretch functionalities with the highest integration of sustainability. Second, developing synergies and partnerships with leading responsible innovators throughout the whole value chain from throwsters down to consumers, people and companies sharing the same goals", declares Shinichiro Haga, Senior Executive Manager of ROICA Division.

ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

"ROICA™ new identity is the ultimate upgrade and milestone of the brand’s evolution path which brings together and merges performance, innovation and responsible imprint. ROICA™ strategic commitment is built on two main pillars that meet value driven consumer’s expectations: first, continuous R&D and innovation activities focusing on new contemporary stretch functionalities with the highest integration of sustainability. Second, developing synergies and partnerships with leading responsible innovators throughout the whole value chain from throwsters down to consumers, people and companies sharing the same goals", declares Shinichiro Haga, Senior Executive Manager of ROICA Division.

ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Balanced geometries, calibrating color and different anatomical details: the visual identity is then declined in 5 different designs, each for one of the 5 applications that can be enhanced by ROICA™ yarns: ACTIVATION for performative sportswear garments, AQUA for smooth swimwear, STYLE#FIT for casual wear and athleisure, ESSENTIALS for next to skin lingerie and underwear and LEGWEAR for stylish hosiery. A complete wardrobe.

The company also created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family for complete transparency and transparent authentic communication.

Constant investments in R&D, people and technology allowed the company to engineer agile, multi-facetted and sustainable stretch yarns which redefine the new circularity, delivering the style, support and finish, trusted to match the performance demands and ambitions of the new generation contemporary consumer.

More information:
ROICA™ fibres Yarns digital
Source:

GB Network Marketing & Communication

FET new premises to enable expansion drive (c) FET
25.05.2021

FET new premises to enable expansion drive

Fibre Extrusion Technology Ltd of Leeds, UK has now commenced construction of a new purpose-built Research & Development Centre to enable continued growth through innovation. This modern two-storey development will be situated on the adjacent site, providing state-of-the-art facilities, including a Visitor Centre and enhanced Process Development Laboratory (PDL) for client testing and product development. Central to FET’s success has been its ability to provide customers with advanced facilities and equipment, together with unrivalled knowledge and expertise in research and production techniques. The new expanded premises will further improve this service.

Clients frequently spend several days on site participating in development trials and technical sales meetings, so the Visitor Centre is designed to make their stay more efficient and comfortable. Sales, administration and design departments will also be housed in the new building.

Fibre Extrusion Technology Ltd of Leeds, UK has now commenced construction of a new purpose-built Research & Development Centre to enable continued growth through innovation. This modern two-storey development will be situated on the adjacent site, providing state-of-the-art facilities, including a Visitor Centre and enhanced Process Development Laboratory (PDL) for client testing and product development. Central to FET’s success has been its ability to provide customers with advanced facilities and equipment, together with unrivalled knowledge and expertise in research and production techniques. The new expanded premises will further improve this service.

Clients frequently spend several days on site participating in development trials and technical sales meetings, so the Visitor Centre is designed to make their stay more efficient and comfortable. Sales, administration and design departments will also be housed in the new building.

The addition of the Visitor Centre will free up a considerable amount of space for production and other facilities in the existing premises. This major refurbishment phase for the existing premises is scheduled for completion at the end of 2021. As a result, FET’s manufacturing capacity will increase by more than 50% to cope with customer demand.  

Substantial year-on-year growth has driven this initiative and FET’s current order book in excess of £10million has provided the opportunity for equipping the company infrastructure for the future. Sustainability has been at the forefront of FET’s growth, supporting customers in their development of sustainable textiles and this principle is reflected in the choice of building materials and products for the Visitor Centre wherever possible.

It is expected that the new Visitor Centre will be opened in the first quarter of 2022.

Source:

Project Marketing Ltd

25.05.2021

ISKO donates denim fabrics to Savannah College of Art and Design

As part of ISKO’s Responsible Innovation™ strategy, the company has a commitment to supporting the next generation of design students and up-and-coming designers and brands. This commitment was shown most recently when the leading denim innovator donated a selection of its denim fabrics to three students at the Savannah College of Art and Design, to support the design and development of their final year collections and help them shape their creative vision.

On 7 May, the students’ collections were presented to a panel of fashion industry experts, including ISKO’s Marketing and Business Development Manager, Sonny Puryear, who offered invaluable feedback and support for their future endeavours.

The university has taken part in several past editions of ISKO’s I-SKOOL™ denim design contest, so it was logical that three of this year’s graduates, Ifeade Adedokun, E'Naiyah Frazier, and Maryam Muhammad would turn to ISKO in light of its longstanding knowledge and expertise when it comes to denim. The company was proud to provide them with ISKO fabrics, developed according to advanced and responsible processes and in compliance with strict international standards.

As part of ISKO’s Responsible Innovation™ strategy, the company has a commitment to supporting the next generation of design students and up-and-coming designers and brands. This commitment was shown most recently when the leading denim innovator donated a selection of its denim fabrics to three students at the Savannah College of Art and Design, to support the design and development of their final year collections and help them shape their creative vision.

On 7 May, the students’ collections were presented to a panel of fashion industry experts, including ISKO’s Marketing and Business Development Manager, Sonny Puryear, who offered invaluable feedback and support for their future endeavours.

The university has taken part in several past editions of ISKO’s I-SKOOL™ denim design contest, so it was logical that three of this year’s graduates, Ifeade Adedokun, E'Naiyah Frazier, and Maryam Muhammad would turn to ISKO in light of its longstanding knowledge and expertise when it comes to denim. The company was proud to provide them with ISKO fabrics, developed according to advanced and responsible processes and in compliance with strict international standards.

More information:
Isko Denim Design fashion industry
Source:

Menabò Group srl

21.05.2021

Alchemie Technology and HeiQ create sustainable textile finishing partnership

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

Baldwin showcases innovations for corrugated flexo printers at ConneXion (c) Baldwin, Barry-Wehmiller
20.05.2021

Baldwin showcases innovations for corrugated flexo printers at ConneXion

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

  • The FlexoCleanerBrush™, a solution to enhance print quality and improve worker safety in corrugated printing.
  • The FlexoCleanPick™, a system designed to automatically remove hickeys—typically caused by paper fibers, dust and ink contamination, and other causes of printing defects—from the plate during the print run without stopping the press or requiring operator skin contact with wash agents.
  • The FlexoDry2™, a fully integrated IR drying system, specifically developed for corrugated flexo printing presses, that reduces energy consumption by up to 30 percent over standard IR dryers via the use of patented Diamond IR™ lamps.
  • A new generation of LED-UV technology—designed by AMS Spectral UV, a Baldwin Technology company, for wide-format flexo corrugated box printing—represents the latest in solid-state LED curing innovations and offers more than a 50 percent reduction in power consumption, compared to traditional UV systems, in an ultra-compact lamphead that fits at the end of the press or between printing units.

You can register here.

Source:

Barry-Wehmiller

Archroma: Whiteness Solutions for Laundry and Detergents in the U.S. (c) Archroma
20.05.2021

Archroma: Whiteness Solutions for Laundry and Detergents in the U.S.

Archroma announces a successful first year on the U.S. home care market with its whiteness solutions for laundry and detergents.

Archroma acquired in December 2019 the BASF's stilbene-based optical brightening agents (OBA) business for liquid and powder laundry detergent applications. The acquisition included the OBA technology, portfolio and manufacturing unit at Ankleshwar, India.

Since then, Archroma has mobilized its global experts, technologies and know-how, to design a holistic solutions portfolio for household, industrial & institutional cleaning (HI&I) aimed to support detergent manufacturers.

The portfolio now includes solutions for whiteness, coloration, stain removal, fabric softening, as well as sequestering agents and surfactants, which can be used in applications such as multipurpose cleaning powders, detergent powders, dish wash tablets and liquids, laundry liquids and fabric softeners, and hard surface cleaners.

Archroma announces a successful first year on the U.S. home care market with its whiteness solutions for laundry and detergents.

Archroma acquired in December 2019 the BASF's stilbene-based optical brightening agents (OBA) business for liquid and powder laundry detergent applications. The acquisition included the OBA technology, portfolio and manufacturing unit at Ankleshwar, India.

Since then, Archroma has mobilized its global experts, technologies and know-how, to design a holistic solutions portfolio for household, industrial & institutional cleaning (HI&I) aimed to support detergent manufacturers.

The portfolio now includes solutions for whiteness, coloration, stain removal, fabric softening, as well as sequestering agents and surfactants, which can be used in applications such as multipurpose cleaning powders, detergent powders, dish wash tablets and liquids, laundry liquids and fabric softeners, and hard surface cleaners.

Archroma used its experience working with manufacturers and brands in the textile industry to enter the US detergent markets for the very first time, and has been able to gain a significant position with most key laundry detergent manufacturers with its solutions for whiteness.

In particular, the company reports special interest from U.S. detergent brands and manufacturers for its Leucophor® 5BMGX, as this optical brightener allows them to achieve high levels of whiteness with a blueish undertone. The product is also highly soluble in water and stable in oxidative environment.

Source:

EMG

Spinnova and KT Trading create new circular textile made from leather waste (c) Spinnova
20.05.2021

Spinnova and KT Trading create new circular textile made from leather waste

The textile industry is constantly searching for new, sustainable, and circular materials. Following thorough research and testing, Spinnova and KT Trading have developed a natural leather fabric made from leather waste without harmful chemicals.

"Leather is an amazing high-quality material with unique properties. With this new textile, we have taken yet another step towards completing the circular economy for leather," says Kristian Geert Jensen, CEO of KT Trading, who now has a joint venture with Spinnova.

Spinnova CEO: Sustainable innovation
Together with KT Trading, ECCO’s key leather provider, Spinnova has established the Respin company - a new joint venture. The partners are already constructing a leather fibre production pilot plant in Finland.

ECCO’s Applied Research division and Spinnova have been in a R&D collaboration since 2018 and have made successful trials with spinning the protein biomass into fibre. Processing leather raw material does not require further technology development from Spinnova. The company already has proof of concept from using the method on wood-based raw material.

The textile industry is constantly searching for new, sustainable, and circular materials. Following thorough research and testing, Spinnova and KT Trading have developed a natural leather fabric made from leather waste without harmful chemicals.

"Leather is an amazing high-quality material with unique properties. With this new textile, we have taken yet another step towards completing the circular economy for leather," says Kristian Geert Jensen, CEO of KT Trading, who now has a joint venture with Spinnova.

Spinnova CEO: Sustainable innovation
Together with KT Trading, ECCO’s key leather provider, Spinnova has established the Respin company - a new joint venture. The partners are already constructing a leather fibre production pilot plant in Finland.

ECCO’s Applied Research division and Spinnova have been in a R&D collaboration since 2018 and have made successful trials with spinning the protein biomass into fibre. Processing leather raw material does not require further technology development from Spinnova. The company already has proof of concept from using the method on wood-based raw material.

More information:
Spinnova Leather textile waste fibres
Source:

Spinnova / Cision

19.05.2021

NCTO testifies on the Medical Supply Chain and Pandemic Response Gaps

NCTO President and CEO Kim Glas testifies on “COVID-19 Part II: Evaluating the Medical Supply Chain and Pandemic Response Gaps, before the Senate Homeland Security and Governmental Affairs Committee.

In written testimony submitted to the committee, Glas provides an overview of: the U.S. market prior to the pandemic and the root causes of America’s dependence on offshore sources for medical PPE; the heroic response of the U.S. textile industry; the federal government’s response to the crisis; and a series of policy recommendations to incentivize the establishment of a permanent domestic PPE supply chain.

Glas details key policy recommendations designed to establish a permanent domestic PPE supply chain, including:

NCTO President and CEO Kim Glas testifies on “COVID-19 Part II: Evaluating the Medical Supply Chain and Pandemic Response Gaps, before the Senate Homeland Security and Governmental Affairs Committee.

In written testimony submitted to the committee, Glas provides an overview of: the U.S. market prior to the pandemic and the root causes of America’s dependence on offshore sources for medical PPE; the heroic response of the U.S. textile industry; the federal government’s response to the crisis; and a series of policy recommendations to incentivize the establishment of a permanent domestic PPE supply chain.

Glas details key policy recommendations designed to establish a permanent domestic PPE supply chain, including:

  • Create strong domestic procurement rules for federal PPE purchases and other essential products--substantially similar to the Berry Amendment and the Kissell Amendment which require 100% US content from fiber production forward
  • Implement forward-looking policies to shore up the Strategic National Stockpile and issue long-term contracts to incentivize investment in the domestic PPE manufacturing base
  • Create federal incentives for private sector hospitals and large provider networks to purchase domestically-produced PPE
  • Continue to deploy the Defense Production Act to shore up the textile industrial base from raw materials to end products for all essential products

View the full written testimony here.

Rinco Ultrasonics AG opens subsidiary in Mexico (c) Rinco Ultrasonics AG
“The new RINCO ULTRASONICS subsidiary in Querétaro, some 200 km north west of Mexico City, is home to an application-based test laboratory. Moving forward, the subsidiary will bring the company and its products and services much closer to customers and partners alike.” Serge Patamia, CEO
19.05.2021

Rinco Ultrasonics AG opens subsidiary in Mexico

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

José Armando Vázquez, the newly appointed country manager for Mexico, brings both passion and specialist expertise to his role. Having grown up in the automotive industry, Vazquez knows the needs and requirements of the supplying industry and the plastics sector inside out.

In José Armando Vázquez, customers and interested parties in Mexico have a local point of contact who is bringing Swiss perfection to Querétaro in the form of RINCO ULTRASONICS MEXICO. In addition to sales, RINCO in Mexico also offers technical services such as an application-based test laboratory and various service facilities to promote the building of partnerships and the delivery of new projects.
“Our aim is to captivate users with our ultrasonic technology and offer them tangible added value so that by using solutions like our AGM Pro ultrasonic generator, for example, they can save time and user fewer materials,”, says Serge Patamia, summarising what customers in Central America can expect.

19.05.2021

Archroma releases 2020 sustainability report

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced the release of its Sustainability Report for its fiscal year 2020.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and building on a strong track record, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

For the first time Archroma conducted a survey with its stakeholders to confirm the relevance of the sustainability topics covered in the report. These include biodiversity, occupational and product safety, and fair labor practices, as well as maybe less expected topics such as compliance, economic performance, and culture.

The report can be downloaded at: www.archroma.com/sustainability.

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced the release of its Sustainability Report for its fiscal year 2020.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and building on a strong track record, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

For the first time Archroma conducted a survey with its stakeholders to confirm the relevance of the sustainability topics covered in the report. These include biodiversity, occupational and product safety, and fair labor practices, as well as maybe less expected topics such as compliance, economic performance, and culture.

The report can be downloaded at: www.archroma.com/sustainability.

More information:
Archroma chemicals
Source:

Archroma

(c) Teijin Carbon Europe GmbH
19.05.2021

Teijin Carbon produces new thermoplastic PPS-Tape

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

For almost 10 years, unidirectional tapes (TPUD) have been manufactured from carbon fibers and thermoplastics in Heinsberg, Germany. The semi-finished products have so far been offered with PEEK or PAEK – and PPS is now added to the list of available matrixes. PPS allows a lower process temperature compared to PEEK or PAEK. For the industrial market in particular, increasing the production rate to make processes more cost-efficient is an opportunity.

Source:

Teijin Carbon Europe GmbH

GREENBOATS, Sicomin and Bcomp Selected as JEC Innovation Awards 2021 Finalists (c) JEC Group
17.05.2021

GREENBOATS, Sicomin and Bcomp Selected as JEC Innovation Awards 2021 Finalists

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

Source:

100% Marketing

Monforts takes part in Webtalk by VDMA’s textile machinery division (c) Monforts/Pleva
13.05.2021

Monforts takes part in Webtalk by VDMA’s textile machinery division

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

To ensure a constant high quality in coating operations it is necessary to accurately measure and control the amount of chemical being applied, and Pleva’s series 700 devices achieve this via contact-free microwave moisture measurement technology which can be supplied either as single- or three-point units, or as a traversing measurement unit.

The free-to-attend webtalk will take place on May 20th from 2-3pm (CEST) and registration can be made here, along with further information.

Source:

AWOL Media

12.05.2021

Rieter updates Outlook for First Half Year 2021

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter Management AG

12.05.2021

Groz-Beckert in person and virtually at ITMA Asia 2021

The 7th ITMA Asia + CITME takes place from 12–16 June 2021 in Shanghai, China. Groz-Beckert presents the new products from all six product areas:
Knitting, Weaving, Felting, Tufting, Carding und Sewing.

The products are presented both physically as exhibits and in extended form via augmented reality. Groz-Beckert welcomes guests on-site at the National Exhibition and Convention Center in Hall 4, Booth C31. In addition to the face-to-face event, the company is inviting industry visitors to its virtual booth.

 

The 7th ITMA Asia + CITME takes place from 12–16 June 2021 in Shanghai, China. Groz-Beckert presents the new products from all six product areas:
Knitting, Weaving, Felting, Tufting, Carding und Sewing.

The products are presented both physically as exhibits and in extended form via augmented reality. Groz-Beckert welcomes guests on-site at the National Exhibition and Convention Center in Hall 4, Booth C31. In addition to the face-to-face event, the company is inviting industry visitors to its virtual booth.

 

More information:
Groz-Beckert ITMA
Source:

Groz-Beckert KG

12.05.2021

NCTO: “Make PPE in America Act” passes

U.S. Senators Rob Portman (R-OH) and Gary Peters (D-MI), Ranking Member and Chairman of the Senate Homeland Security and Governmental Affairs Committee, applauded the Senate Homeland Security and Governmental Affairs Committee for passing their bipartisan legislation that will strengthen efforts to onshore production of personal protective equipment (PPE) in the United States by requiring federal agencies to issue long-term contracts for American-made PPE. Reshoring production will ensure American workers, health care professionals, and more have the PPE they need as the economy continues to reopen. Domestic production of PPE supplies also will create American manufacturing jobs and ensure that America is better prepared for the next pandemic.

U.S. Senators Rob Portman (R-OH) and Gary Peters (D-MI), Ranking Member and Chairman of the Senate Homeland Security and Governmental Affairs Committee, applauded the Senate Homeland Security and Governmental Affairs Committee for passing their bipartisan legislation that will strengthen efforts to onshore production of personal protective equipment (PPE) in the United States by requiring federal agencies to issue long-term contracts for American-made PPE. Reshoring production will ensure American workers, health care professionals, and more have the PPE they need as the economy continues to reopen. Domestic production of PPE supplies also will create American manufacturing jobs and ensure that America is better prepared for the next pandemic.

Source:

NCTO / Senate Homeland Security & Governmental Affairs Committee

11.05.2021

JEC Composites Innovation Awards 2021: Finalists Line Up Revealed

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.

Source:

JEC Group