From the Sector

Reset
3974 results
Photo: CHT
26.05.2023

BEZAKTIV ONE: New Reactive dyes range by CHT

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

BEZAKTIV ONE dyes can be dyed, rinsed and soaped between 40 and 60 °C. Therefore, the BEZAKTIV ONE exhaust dyeing process is significantly shorter compared to conventional reactive dyeing processes, where temperatures between 60 and 98 °C are required. This advantage means savings in process time and higher productivity for the textile dyer.

The advantages become particularly clear when dyeing medium to dark shades with the BEZAKTIV ONE process. Due to the high fixation level in combination with good color build-up dark shades can be matched with lower dye concentrations of BEZAKTIV ONE than with conventional bifunctional reactive dyes. The addition of the auxiliary COTOBLANC SEL in the second soap bath has an additional positive effect, so that a washing process with low water and energy consumption generates excellent wet fastness properties on the textile.

BEZAKTIV ONE Foto: CHT
25.05.2023

BEZAKTIV ONE: Neues Reaktivfarbstoff-Sortiment von CHT

  • Reaktivfarbstoffe für wasser- und energiesparende Färbeprozesse mit stark verkürzten Prozesszeiten

BEZAKTIV ONE deckt ein breites Spektrum an außergewöhnlich starken Farbstoffen ab. Dies ermöglicht kosteneffiziente Färbeprozesse mit weniger Farbstoff und Salz. Das ausgezeichnete Auswaschverhalten ermöglicht kurze Spülprozesse bei tiefer Temperatur und bietet dadurch einen weiteren ökonomischen und ökologischen Vorteil. Die Farbstoffe eignen sich durch ihre gute Mehrfachwaschechtheit besonders für langlebige Textilien.

Zellulosefasern werden häufig mit Reaktivfarbstoffen gefärbt, da diese in einer Vielzahl von Farben kommerziell erhältlich sind und Färbungen mit hoher Waschechtheit ergeben. Reaktivfärbungen benötigen durch die notwendigen Spülprozesse jedoch viel Wasser. Aufgrund der gestiegenen ökologischen Anforderungen ist die Entwicklung energie- und wassersparender Verfahren eine Kernanforderung an neue Farbstoffe.

Eine minimale Anzahl von Spülbädern und generell niedrigere Temperaturen der Färbe-, Spül- und Seifbäder tragen zu effizienten wasser- und energiesparenden Färbeprozessen bei.

  • Reaktivfarbstoffe für wasser- und energiesparende Färbeprozesse mit stark verkürzten Prozesszeiten

BEZAKTIV ONE deckt ein breites Spektrum an außergewöhnlich starken Farbstoffen ab. Dies ermöglicht kosteneffiziente Färbeprozesse mit weniger Farbstoff und Salz. Das ausgezeichnete Auswaschverhalten ermöglicht kurze Spülprozesse bei tiefer Temperatur und bietet dadurch einen weiteren ökonomischen und ökologischen Vorteil. Die Farbstoffe eignen sich durch ihre gute Mehrfachwaschechtheit besonders für langlebige Textilien.

Zellulosefasern werden häufig mit Reaktivfarbstoffen gefärbt, da diese in einer Vielzahl von Farben kommerziell erhältlich sind und Färbungen mit hoher Waschechtheit ergeben. Reaktivfärbungen benötigen durch die notwendigen Spülprozesse jedoch viel Wasser. Aufgrund der gestiegenen ökologischen Anforderungen ist die Entwicklung energie- und wassersparender Verfahren eine Kernanforderung an neue Farbstoffe.

Eine minimale Anzahl von Spülbädern und generell niedrigere Temperaturen der Färbe-, Spül- und Seifbäder tragen zu effizienten wasser- und energiesparenden Färbeprozessen bei.

BEZAKTIV ONE Farbstoffe können zwischen 40 und 60 °C gefärbt, gespült und geseift werden. Daher ist der Ausziehfärbeprozess im Vergleich zu herkömmlichen Reaktivfärbeverfahren, bei denen Temperaturen zwischen 60 und 98 °C erforderlich sind, deutlich kürzer. Dieser Vorteil bedeutet für den Textilfärber Einsparungen bei der Prozesszeit und eine höhere Produktivität.

Besonders deutlich werden die Vorteile des Verfahrens bei mittleren bis dunklen Farbtönen. Durch die Kombination von hohem Fixiergrad und gutem Farbaufbau können insbesondere dunkle Nuancen mit geringeren Farbstoff-Einsatzmengen als mit herkömmlichen bifunktionellen Reaktivfarbstoffen erreicht werden. Durch die Zugabe des Hilfsmittels COTOBLANC SEL im zweiten Seifbad ergibt sich ein zusätzlicher positiver Effekt, so dass ein Waschprozess mit geringem Wasser- und Energieaufwand zu hervorragenden Nassechtheiten auf dem Textil führt.

Source:

CHT

Capsule collection using recycled materials and kinder wash processes Photo ISKO
25.05.2023

By Urban Outfitters & ISKO Denim: Capsule collection using recycled materials and kinder wash processes

BDG [By Urban Outfitters] and the denim mill, ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of ISKO’s Creative Room London. The collection features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

BDG [By Urban Outfitters] and the denim mill, ISKO have come together to develop a 10-piece collection made up of workwear-inspired denim pieces with finishing designs by British Artist, Dwayne Coleman.

Partnering with ISKO, Urban Outfitters has developed more sustainable denim pieces for this collaboration, utilizing recycled cotton yarns made from cutting waste. All pieces are washed using innovative technology to reduce the chemical, water, and energy footprint so that each item has a low environmental impact score. The development of these washes were done with the help of ISKO’s Creative Room London. The collection features an innovative style that uses no virgin cotton, and yet the authenticity and durability remains the same.

The collaboration incorporates the principles of circular design, including minimal wash processing, recycled cotton content, minimal metal trims and removable shank buttons. The styles are designed to last, and after many wears they will be readily recyclable for their next life. Urban Outfitters are members of Better Cotton whose mission is to help cotton communities survive and thrive, while protecting and restoring the environment as part of the brand's wider sustainability initiatives.

Source:

Menabo for ISKO

(c) SHIMA SEIKI MFG., LTD.
24.05.2023

SHIMA SEIKI at ITMA 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

Of the 9 knitting machines SHIMA SEIKI is exhibiting, 8 machines will be part of the Next-Generation lineup, ranging from WHOLEGARMENT® knitting machines and computerized flat knitting machines to glove knitting machines. More than 300 items will be on display as proposals for knitted applications in various fields ranging from fashion, sports, shoes, bags and accessories to medical, safety, automotive, aeronautical and other wearable and industrial textile applications.

In addition to machine technology, SHIMA SEIKI's SDS-ONE APEX series computer graphic design system and software will be shown with their latest software upgrades that feature significant improvements in knit programming, 3D functions and speed. Demonstrations will be available for a comprehensive fashion tech solutions package based on realistic virtual sampling and supported by various digital solutions and web services.

More information:
Shima Seiki ITMA 2023 ITMA
Source:

SHIMA SEIKI MFG., LTD.

24.05.2023

SGL Carbon SE: Annual General Meeting 2023

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

Source:

SGL Carbon SE

(c) Martin Diepold
Ahmet Mercan (CEO AlphaTauri) und Antje Hundhausen (Telekom)
24.05.2023

AlphaTauri “Heatable Capsule Collection 2.0” ausgezeichnet mit German Innovation Award 2023

AlphaTauri und Deutscher Telekom ist am Dienstag, den 23. Mai der German Innovation Award 2023 für die Heatable Capsule Collection 2.0 (HCC 2.0) verliehen worden. Die beheizbare Smart Fashion Reihe erhielt die Auszeichnung „Winner in Excellence in Business to Consumer - Fashion“.

Kennzeichnend für die Styles der Heatable Capsule Collection (HCC) sind beheizbare Zonen, die sich per Knopfdruck, via App oder via Apple Watch aktivieren und auf eine Wunschtemperatur einstellen lassen. Die Bereiche befinden sich in den beiden vorderen Taschen sowie rechts und links am Rücken. Sie können neben den verschiedenen Heizmodi „Pulse“, „Intense“ und „Swap“ überdies auf eine bestimmte Zieltemperatur eingestellt werden, die dann automatisch gehalten und auch gespeichert werden kann. Mit Strom versorgt werden die Jacken per Power Bank, die in einer separaten Tasche am Rücken angeschlossen und verstaut wird. Die Deutsche Telekom bietet dafür ein spezielles Modell an.

AlphaTauri und Deutscher Telekom ist am Dienstag, den 23. Mai der German Innovation Award 2023 für die Heatable Capsule Collection 2.0 (HCC 2.0) verliehen worden. Die beheizbare Smart Fashion Reihe erhielt die Auszeichnung „Winner in Excellence in Business to Consumer - Fashion“.

Kennzeichnend für die Styles der Heatable Capsule Collection (HCC) sind beheizbare Zonen, die sich per Knopfdruck, via App oder via Apple Watch aktivieren und auf eine Wunschtemperatur einstellen lassen. Die Bereiche befinden sich in den beiden vorderen Taschen sowie rechts und links am Rücken. Sie können neben den verschiedenen Heizmodi „Pulse“, „Intense“ und „Swap“ überdies auf eine bestimmte Zieltemperatur eingestellt werden, die dann automatisch gehalten und auch gespeichert werden kann. Mit Strom versorgt werden die Jacken per Power Bank, die in einer separaten Tasche am Rücken angeschlossen und verstaut wird. Die Deutsche Telekom bietet dafür ein spezielles Modell an.

Nach gelungener Etablierung der beiden vorangegangenen Kapselkollektionen in den Jahren 2020 und 2022 launchen AlphaTauri und die Deutsche Telekom diesen Herbst die Heatable Capsule Collection 3.0 (HCC 3.0) und führen das branchenübergreifende, kooperative Projekt fort.

Wilfred-Udo Andree Foto: Fliegel Textilservice
Wilfred-Udo Andree
24.05.2023

FLIEGEL TEXTILSERVICE als TOP-Arbeitgeber 2023 ausgezeichnet

Fliegel Textilservice wurde von den Herausgebern des Hotelführers „Schlummer Atlas“ in der Kategorie Zulieferindustrie als TOP-Arbeitgeber 2023 ausgezeichnet. Die Auszeichnung basiert auf der jährlichen Busche-Studie, die die Arbeitgeberattraktivität im Gastgewerbe im deutschsprachigen Raum auf Basis einer wissenschaftlich begleiteten Befragung erhebt. Über 200.000 Betriebe des Gastgewerbes wurden dazu aufgerufen, ihre Bewertung abzugeben.

"Wir sind sehr stolz auf diese Auszeichnung und betrachten sie als Bestätigung unseres Engagements für unsere Mitarbeiterinnen und Mitarbeiter und unsere unternehmerische Weitsicht", sagt der Eigentümer von Fliegel Textilservice, Wilfred-Udo Andree. "Als unabhängiges mittelständisches Unternehmen legen wir großen Wert auf eine positive Arbeitsatmosphäre und eine offene Unternehmenskultur, in der sich jeder Mitarbeiter wertgeschätzt fühlt."

Fliegel Textilservice wurde von den Herausgebern des Hotelführers „Schlummer Atlas“ in der Kategorie Zulieferindustrie als TOP-Arbeitgeber 2023 ausgezeichnet. Die Auszeichnung basiert auf der jährlichen Busche-Studie, die die Arbeitgeberattraktivität im Gastgewerbe im deutschsprachigen Raum auf Basis einer wissenschaftlich begleiteten Befragung erhebt. Über 200.000 Betriebe des Gastgewerbes wurden dazu aufgerufen, ihre Bewertung abzugeben.

"Wir sind sehr stolz auf diese Auszeichnung und betrachten sie als Bestätigung unseres Engagements für unsere Mitarbeiterinnen und Mitarbeiter und unsere unternehmerische Weitsicht", sagt der Eigentümer von Fliegel Textilservice, Wilfred-Udo Andree. "Als unabhängiges mittelständisches Unternehmen legen wir großen Wert auf eine positive Arbeitsatmosphäre und eine offene Unternehmenskultur, in der sich jeder Mitarbeiter wertgeschätzt fühlt."

More information:
Textilservice Auszeichnung
Source:

Fliegel Textilservice

(c) Freudenberg Performance Materials Holding GmbH
24.05.2023

Freudenberg: “Material Health” certification for comfortemp® product series

The thermal insulation in the product series comfortemp® soft HO 80x from Freudenberg Performance Materials Apparel (Freudenberg) has achieved Gold status in the Material Health category of the Cradle to Cradle Certified® Product Standard Version 3.1.

The soft thermal insulation of the HO 80x soft series (HO 803, HO 804, HO 805, HO 806) is made from polyamide 6 wadding and is multiple recyclable in terms of a sustainable circular economy. The wadding is also characterized by high wearing comfort, making it suitable for sustainable applications in the luxury, sportswear and outdoor sectors. Thanks to its construction as roll goods, the wadding does not clump and can endure multiple wash cycles at 40°C.

Certifications by the Cradle to Cradle Products Innovation Institute are based on testing for hazardous materials in products and processes. Plus, the impact of chemical substances is assessed on the three product life cycle phases: final manufacture, use and end of use. Freudenberg will continue optimizing its products to ensure material safety and quality for future use and cycling.

The thermal insulation in the product series comfortemp® soft HO 80x from Freudenberg Performance Materials Apparel (Freudenberg) has achieved Gold status in the Material Health category of the Cradle to Cradle Certified® Product Standard Version 3.1.

The soft thermal insulation of the HO 80x soft series (HO 803, HO 804, HO 805, HO 806) is made from polyamide 6 wadding and is multiple recyclable in terms of a sustainable circular economy. The wadding is also characterized by high wearing comfort, making it suitable for sustainable applications in the luxury, sportswear and outdoor sectors. Thanks to its construction as roll goods, the wadding does not clump and can endure multiple wash cycles at 40°C.

Certifications by the Cradle to Cradle Products Innovation Institute are based on testing for hazardous materials in products and processes. Plus, the impact of chemical substances is assessed on the three product life cycle phases: final manufacture, use and end of use. Freudenberg will continue optimizing its products to ensure material safety and quality for future use and cycling.

Source:

Freudenberg Performance Materials Holding GmbH

(c) Dibella GmbH
Marvin Groß-Hardt
24.05.2023

Dibella strengthens its sales team with Marvin Groß-Hardt

The Dibella sales team is growing. Since May 1st 2023, Marvin Groß-Hardt has been supporting the company's national and international customers.

Dibella welcomes Marvin Groß-Hardt, an experienced sales employee, to the team. The trained wholesale and foreign trade merchant and graduate in business administration brings many years of experience in supporting and advising customers. He is also familiar with the special features of contract textiles due to a previous position in product and sales management for hotel beds and bedding.

At Dibella, the 30-year-old from Bocholt is responsible for looking after existing customers and building up new customer relationships at home and abroad, and will establish new contacts.

The Dibella sales team is growing. Since May 1st 2023, Marvin Groß-Hardt has been supporting the company's national and international customers.

Dibella welcomes Marvin Groß-Hardt, an experienced sales employee, to the team. The trained wholesale and foreign trade merchant and graduate in business administration brings many years of experience in supporting and advising customers. He is also familiar with the special features of contract textiles due to a previous position in product and sales management for hotel beds and bedding.

At Dibella, the 30-year-old from Bocholt is responsible for looking after existing customers and building up new customer relationships at home and abroad, and will establish new contacts.

More information:
Dibella hotels Contract textiles
Source:

Dibella GmbH

24.05.2023

DyStar launches Eco-Advanced Indigo Dyeing

DyStar, a specialty chemical company, announces its latest innovation, Eco-Advanced Indigo Dyeing.

The launch of DyStar’s Eco-Advanced Indigo Dyeing aims to reduce water usage by up to 90% and energy consumption by up to 30% during the production process. The new DyStar’s Eco-Advanced Indigo Dyeing is applicable in the Indigo traditional dyeing process, for Sulphur dyes, and colored Denim. The technique of sustainable indigo dyeing has already been proven to reduce substantially the effluent load in Denim production.

DyStar’s eco-friendly indigo dyeing process is recognized for helping customers deliver better consistency in quality while achieving less wastewater treatment in the effluent.

DyStar, a specialty chemical company, announces its latest innovation, Eco-Advanced Indigo Dyeing.

The launch of DyStar’s Eco-Advanced Indigo Dyeing aims to reduce water usage by up to 90% and energy consumption by up to 30% during the production process. The new DyStar’s Eco-Advanced Indigo Dyeing is applicable in the Indigo traditional dyeing process, for Sulphur dyes, and colored Denim. The technique of sustainable indigo dyeing has already been proven to reduce substantially the effluent load in Denim production.

DyStar’s eco-friendly indigo dyeing process is recognized for helping customers deliver better consistency in quality while achieving less wastewater treatment in the effluent.

(c) Beaulieu International Group
22.05.2023

B.I.G. Yarns launches Sustainable Yarns at Clerkenwell Design Week

B.I.G. Yarns unveils its new “SustainableYarns” platform, with Clerkenwell Design Week visitors the first to be invited to get on board and focus on what matters most for the design and manufacture of sustainable soft floorings.

The expert in polyamide (PA) 1 step 3 ply yarns offers a range of options for manufacturers to introduce sustainable yarns into carpet solutions and reach sustainability targets faster and more efficiently.

The Sustainable Yarns range creates opportunities to design with recycled content yarn (EqoCycle), to work with renewable resources (EqoBalance), and, following the launch of new polyamide 6 (PA6) EqoYarn at Clerkenwell Design Week, to also leverage the low-impact value chain.

New addition EqoYarn is a new low-impact PA6 carpet yarn based on the most recent innovations in polymer production, which enable yarn manufacturers to lower their carbon footprint by nearly 50% and give carpet manufacturers more options to reduce their impact.

B.I.G. Yarns unveils its new “SustainableYarns” platform, with Clerkenwell Design Week visitors the first to be invited to get on board and focus on what matters most for the design and manufacture of sustainable soft floorings.

The expert in polyamide (PA) 1 step 3 ply yarns offers a range of options for manufacturers to introduce sustainable yarns into carpet solutions and reach sustainability targets faster and more efficiently.

The Sustainable Yarns range creates opportunities to design with recycled content yarn (EqoCycle), to work with renewable resources (EqoBalance), and, following the launch of new polyamide 6 (PA6) EqoYarn at Clerkenwell Design Week, to also leverage the low-impact value chain.

New addition EqoYarn is a new low-impact PA6 carpet yarn based on the most recent innovations in polymer production, which enable yarn manufacturers to lower their carbon footprint by nearly 50% and give carpet manufacturers more options to reduce their impact.

For its EqoYarn Bulk Continuous Filament (BCF) production process, B.I.G. Yarns has selected the few best-in-class partners that have made major steps forward in terms of sustainability, and reduced their greenhouse gas emissions thanks to continuous investments in process efficiency, green energy, heat optimization and waste reduction. The result is EqoYarn with a carbon footprint of 4 kg CO2 eq/kg yarns, which is a CO2 reduction of up to 50% compared to conventional PA yarns.

EqoBalance PA6 yarns enable customers to reach an even higher CO2 reduction of up to 75%. Manufactured with polymers made from renewable resources such as organic waste from cooking oil instead of virgin or fossil feedstock, these yarns have a carbon footprint of 1.98 kg CO2 eq./ kg yarns. They help carpet manufacturers to create products with an extremely low carbon footprint.

EqoCycle PA6 yarns are fully recyclable and incorporate 75% recycled content originating from recycled and regenerated PA6 granules. With a carbon footprint of 4.64 kg CO2 eq./ kg yarns, they deliver the same high-quality performance of virgin PA6 yarn with the benefit of 37% CO2 reduction. EqoCycle yarns offer carpet manufacturers a sustainable alternative to help reduce the ecological footprint of their products and move towards a circular economy without jeopardizing the end-product quality.

In addition to the different CO2-reducing options, B.I.G. Yarns’ customers can access an unlimited colour range to elevate their designs. Its BCF technology for polyamide yarns, twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex, along with its colour studio, are available to support their creation of customised collections.

Source:

Beaulieu International Group

Photo: Naturopera
22.05.2023

ANDRITZ converting line for baby diapers at Naturopera, France

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

The ANDRITZ converting machine operating at Naturopera is highly flexible, taking just a few settings to switch to the production of bio-based diapers. It is designed for a multiple-size process, features an operator-friendly interface, and guarantees a production speed of 800 ppm.

Naturopera is a French company producing baby care, femcare and household products with a strong focus on local production and sustainability.

Source:

Andritz AG

22.05.2023

adidas to release existing YEEZY product

adidas announced it will begin selling some of the remaining inventory of adidas YEEZY products, with an initial release end of May 2023. A significant amount will be donated to selected organizations working to combat discrimination and hate, including racism and antisemitism. These include but are not limited to the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change.  

The release will mark the first time that products have been available to consumers since adidas terminated the YEEZY partnership in October 2022. The products will be existing designs and designs initiated in 2022 for sale in 2023.  Additional releases of existing inventory are currently under consideration, but timing is yet to be determined. Today’s announcement has no immediate impact on the company’s current financial guidance for 2023.

adidas announced it will begin selling some of the remaining inventory of adidas YEEZY products, with an initial release end of May 2023. A significant amount will be donated to selected organizations working to combat discrimination and hate, including racism and antisemitism. These include but are not limited to the Anti-Defamation League (ADL) and the Philonise & Keeta Floyd Institute for Social Change.  

The release will mark the first time that products have been available to consumers since adidas terminated the YEEZY partnership in October 2022. The products will be existing designs and designs initiated in 2022 for sale in 2023.  Additional releases of existing inventory are currently under consideration, but timing is yet to be determined. Today’s announcement has no immediate impact on the company’s current financial guidance for 2023.

Since terminating the YEEZY partnership in October, adidas has been exploring multiple scenarios for the potential use of the existing YEEZY inventory. The process involved seeking feedback and listening to a diverse group of employees, organizations, communities, and consumers for how to responsibly manage the existing product. The company went ahead with already committed production orders after the partnership was terminated. This was done to help protect its supply chain partners from being negatively affected by cancellations.

More information:
adidas adidas AG Sportswear shoes
Source:

adidas AG

(c) Italdesign
Durch direkten 3D-Druck auf Materialien wie Wildleder kann man bei Anwendungen für Fahrzeuginnenräume besser unterschiedliche Farben und Texturen ausprobieren
18.05.2023

Stratasys zeigt 3D-Drucktechnologie auf ITMA 2023

Auf der ITMA in Mailand (Italien) zeigt Stratasys vom 8.-14. Juni erstmals seine moderne 3D-Drucktechnologie 3DFashion™ für direkten Textildruck. Die Lösung kombiniert fortschrittliche Materialien mit dem 3D-Drucker J850 TechStyle™. Textil- und Bekleidungshersteller können hierdurch neue Möglichkeiten ausloten und vollfarbige, durchscheinende, starre und flexible Materialien direkt an Textilien und Kleidungsstücken befestigen.

Die Technologie dient dazu, verschiedene neue Modeanwendungen zu erschließen und profitables Wachstum voranzutreiben. Textilhersteller, die im Auftrag von Luxusmodedesignern und Marken aus Sektoren wie der Automobilbranche und dem gehobenen Modesektor arbeiten, können ihr Serviceangebot differenzieren.

Die 3D-Druckmaterialien umfassen inzwischen auch die Kunstharze VeroEco™ Flex von Stratasys, die den strengen RSL-Industriestandards entsprechen.

Auf der ITMA in Mailand (Italien) zeigt Stratasys vom 8.-14. Juni erstmals seine moderne 3D-Drucktechnologie 3DFashion™ für direkten Textildruck. Die Lösung kombiniert fortschrittliche Materialien mit dem 3D-Drucker J850 TechStyle™. Textil- und Bekleidungshersteller können hierdurch neue Möglichkeiten ausloten und vollfarbige, durchscheinende, starre und flexible Materialien direkt an Textilien und Kleidungsstücken befestigen.

Die Technologie dient dazu, verschiedene neue Modeanwendungen zu erschließen und profitables Wachstum voranzutreiben. Textilhersteller, die im Auftrag von Luxusmodedesignern und Marken aus Sektoren wie der Automobilbranche und dem gehobenen Modesektor arbeiten, können ihr Serviceangebot differenzieren.

Die 3D-Druckmaterialien umfassen inzwischen auch die Kunstharze VeroEco™ Flex von Stratasys, die den strengen RSL-Industriestandards entsprechen.

Stratasys bietet auch eine Vorschau auf zwei Technologien, die sich zurzeit in der Entwicklungsphase befinden. Das konzeptionelle Instrument des Unternehmens für den direkten Druck auf Kleidungsstücke wurde entwickelt, um vorhandene Kleidungsstücke kreativer zu gestalten und langlebiger zu machen. Mit dieser zusätzlichen 3D-Druckfunktion der J850 TechStyle kann man ein bestimmtes Design direkt auf vorhandene Kleidungsstücke drucken, die an einem speziellen Instrument befestigt sind. Hierzu zählen etwa Hosen, Hemden und Jacken, denen man so ein „zweites Leben“ ermöglichen oder einen neuen, individuellen Stil verleihen kann.

Stratasys ermöglicht zudem einen ersten Blick auf ein Softwareinstrument für die Umwandlung von 2D in 3D. Nutzer des Druckers J850 TechStyle können damit mühelos Länge, Farben und Texturen von 2D-Bildern anpassen und in 3D-gedruckte Elemente umwandeln. Besucher können ein 2D-Logo einreichen, das Stratasys während der Messe in ein 3D-druckbares Bild auf Textilmustern umwandelt.

Zudem wird Ofer Libo, Senior Product Manager von Stratasys, auf der ITMA im Rahmen des offiziellen Informationsprogramms der Veranstaltung eine Präsentation halten. Sie trägt den Titel „Innovative Herstellung von Textilien und Kleidungsstücken mit der 3D-Drucktechnologie für direkten Textildruck von Stratasys”.

More information:
Stratasys ITMA ITMA 2023 3D-Druck
Source:

Stratasys

Foto: BekaertDeslee/HeiQ
BekaertDeslee receiving the "High Product Quality" Interzum Award
18.05.2023

BekaertDeslee's Purotex+ with HeiQ Allergen Tech wins Interzum Award

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

Source:

HeiQ 

(c) Sappi Europe
18.05.2023

Sappi at ITMA 2023

As a global provider of sustainable woodfibre products, Sappi will be showcasing its solutions for the garment industry under the theme “Fashion meets Forest” at ITMA 2023 – with sublimation papers and its dissolving wood pulp, used for the production of garment fibres under the “Verve” brand name.

How can the woodfibre industry support a more sustainable garments market? Sappi is eager to answer this question at the ITMA and has created a “knowledge trail” for visitors to explore under the motto “Fashion meets Forest”. Visitors to the stand can follow the journey from wood via cellulose and fibre to the finished yarn and the printed garment.

Sublimation papers: Expanded production capacity in Carmignano
Sappi’s Transjet sublimation papers stand for fast, uniform ink transfer and minimal ink consumption. As a premium supplier, Sappi is constantly striving to meet its customers’ needs. So, at this year’s ITMA, various sublimation papers with optimised qualitative properties will be on show.

As a global provider of sustainable woodfibre products, Sappi will be showcasing its solutions for the garment industry under the theme “Fashion meets Forest” at ITMA 2023 – with sublimation papers and its dissolving wood pulp, used for the production of garment fibres under the “Verve” brand name.

How can the woodfibre industry support a more sustainable garments market? Sappi is eager to answer this question at the ITMA and has created a “knowledge trail” for visitors to explore under the motto “Fashion meets Forest”. Visitors to the stand can follow the journey from wood via cellulose and fibre to the finished yarn and the printed garment.

Sublimation papers: Expanded production capacity in Carmignano
Sappi’s Transjet sublimation papers stand for fast, uniform ink transfer and minimal ink consumption. As a premium supplier, Sappi is constantly striving to meet its customers’ needs. So, at this year’s ITMA, various sublimation papers with optimised qualitative properties will be on show.

Sappi maintains the high quality of its coated Transjet and uncoated Basejet sublimation papers by regularly investing in new, state-of-the-art technologies. At the end of April, a new warehouse has been inaugurated at the Carmignano mill in Italy. In the next month’s, Sappi will further invest in two new converting machines with a width of 1.9 meters and 3.2 meters as well as in a fully automated packaging line. All the investments will support the company’s vision of having a complete in-house solution for the sublimation industry, have a positive impact on CO2 emission, satisfy the increased demand of their customers as well as further improve lead times.
 
“Verve” dissolving wood pulp for high-quality textiles
Sappi will also be showcasing its dissolving pulp (DP) brand “Verve”. DP provides the feedstock raw material toward producing rayon fibres such as Lyocell and viscose and further into yarns and fabrics. Textiles produced from wood based cellulosic fibres are noted for their breathability, colour fastness, softness, drape, absorbency and biodegradability. In addition to the garment industry, dissolving pulp is also used in various household and pharmaceutical products.

Source:

Sappi Europe

(c) Carbios
18.05.2023

Carbios recognized as a flagship start-up in French green innovation

Carbios has been selected among the 22,000 start-ups in the French Tech ecosystem to represent French innovation at the 6th “Choose France” Summit.  “Choose France” is an international business summit dedicated to the attractiveness of France launched at the initiative of Emmanuel Macron, the President of the Republic. Only ten companies, including Carbios, have been chosen to exhibit their technologies at the Château de Versailles.  On this occasion, Carbios announces that it has joined the Coq Vert community launched by Bpifrance in partnership with ADEME[1] and the Ministry of Ecological Transition, to connect with other environmentally committed business leaders and advance its international deployment.

Carbios has been selected among the 22,000 start-ups in the French Tech ecosystem to represent French innovation at the 6th “Choose France” Summit.  “Choose France” is an international business summit dedicated to the attractiveness of France launched at the initiative of Emmanuel Macron, the President of the Republic. Only ten companies, including Carbios, have been chosen to exhibit their technologies at the Château de Versailles.  On this occasion, Carbios announces that it has joined the Coq Vert community launched by Bpifrance in partnership with ADEME[1] and the Ministry of Ecological Transition, to connect with other environmentally committed business leaders and advance its international deployment.

“With INRAE[2], we chose to highlight Carbios at the Choose France summit as a symbol of French economic dynamism,” comments Philippe Gassmann, Secretary General Choose France 2023 (French Treasury). ” With its innovative “Made in France” biotechnologies that bring plastic into the circular economy, Carbios illustrates the wealth of  innovation within the French cleantech ecosystem.  I thank Carbios for its ambassadorship for this ecosystem to the 200 foreign guests attending the 6th Choose France Summit with the theme: Investing for a sustainable future.”

“Carbios is honored to have been selected by the Elysée Palace for Choose France.  This international summit provides an opportunity for meetings between the President of the Republic, members of the Government and the leaders of major foreign and French companies to discuss France’s economic ambitions and attractiveness,” commented Emmanuel Ladent, Chief Executive Officer of Carbios. “Carbios is in the midst of a major industrial rollout, with a first plant planned in the Grand Est region, and the international commercial deployment of our processes.  We are very grateful for the French Government’s support at this strategic time for the company.”
(Emmanuel Ladent, CEO, and Alain Marty, Chief Scientific Officer, representing Carbios at Choose France)

The Coq Vert community
Launched by Bpifrance, in partnership with ADEME and the Ministry of Ecological Transition, this community brings together 2,000 members who are players in sustainable development and are convinced of the need to act for energy and ecological transition.

[1] ADEME = The French Agency for Ecological Transition
[2] INRAE = France’s National Research Institute for Agriculture, Food and Environment

Source:

Carbios 

17.05.2023

Adient: ISCC PLUS certification for sustainable foam production

Adient, a leading supplier of automotive seating systems, has achieved full ISCC PLUS (International Sustainability & Carbon Certification) of its foam plants in Lučenec (Slovakia) and Mandling (Austria) for increasing the sustainability of foams produced for its automotive seating systems. The stringent global sustainability certification system of ISCC allows for proven enhanced traceability of circular polyurethane (PU) foams throughout the supply chain.
 
The environmental impact of the newly developed PU formulations and processes of molded foams is improved by the re-integration of waste materials from industrial & natural origins replacing crude oil into the PU raw materials. This reduces the use of fossil-based materials in favor of recycled materials, to foster the development of a circular economy. As a result, the plants can offer foams with up to 20% less CO2 impact while fulfilling the same quality requirements as their conventional equivalents. To date, Adient is the first European ISCC PLUS certified PU foam manufacturer in this field.

Adient, a leading supplier of automotive seating systems, has achieved full ISCC PLUS (International Sustainability & Carbon Certification) of its foam plants in Lučenec (Slovakia) and Mandling (Austria) for increasing the sustainability of foams produced for its automotive seating systems. The stringent global sustainability certification system of ISCC allows for proven enhanced traceability of circular polyurethane (PU) foams throughout the supply chain.
 
The environmental impact of the newly developed PU formulations and processes of molded foams is improved by the re-integration of waste materials from industrial & natural origins replacing crude oil into the PU raw materials. This reduces the use of fossil-based materials in favor of recycled materials, to foster the development of a circular economy. As a result, the plants can offer foams with up to 20% less CO2 impact while fulfilling the same quality requirements as their conventional equivalents. To date, Adient is the first European ISCC PLUS certified PU foam manufacturer in this field.

Based on a mass balance approach, the certification highlights the need to envi-ronmentally balance every single stage of automotive value creation, including the entire supply chain.

(c) EREMA
Manfred Hackl, CEO EREMA Group GmbH
17.05.2023

EREMA: Manfred Hackl is Plastics Recycling Ambassador of the Year

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

"I dedicate the Recycling Ambassador of the Year award to the employees at the EREMA Group. This year we are celebrating our 40th anniversary, and this award, just like the many we have received for our technologies over the years, shows that we can be very proud of what we have accomplished and achieved together during this time," says Manfred Hackl, delighted with the award. In the past business year 2022/23 alone, the extruders supplied by the companies within the EREMA Group deliver an additional 1.6 million tonnes of recycling capacity.

Source:

EREMA Group GmbH

(c) Indorama Ventures Public Company Limited
17.05.2023

Indorama Ventures upgraded MSCI ESG Ratings

Indorama Ventures Public Company Limited, a global sustainable chemical producer, was upgraded to "A" from "BBB" in MSCI’s ESG rating, reaffirming the company’s effective management of sustainability related risks and opportunities.

MSCI (Morgan Stanley Capital International), an independent provider of research-based indices and analytics, ranked Indorama Ventures among the top 14% of 65 companies worldwide in the commodity chemicals industry. The rating has placed it in the top quartile for opportunities in clean tech, water stress, corporate governance, and corporate behavior.

Indorama Ventures Public Company Limited, a global sustainable chemical producer, was upgraded to "A" from "BBB" in MSCI’s ESG rating, reaffirming the company’s effective management of sustainability related risks and opportunities.

MSCI (Morgan Stanley Capital International), an independent provider of research-based indices and analytics, ranked Indorama Ventures among the top 14% of 65 companies worldwide in the commodity chemicals industry. The rating has placed it in the top quartile for opportunities in clean tech, water stress, corporate governance, and corporate behavior.

Indorama Ventures is committed to reducing water intensity by 10% by 2025 and 20% by 2030. It developed a Water Risk Assessment Report on its contributions to achieving sustainable management of water targets and the United Nations Sustainable Development Goals (UN SDGs). For improved corporate governance, the company provides whistleblowers with protection from retaliation, and has policies on business ethics and anti-corruption. Relating to opportunities in clean tech, Indorama Ventures’ is investing in recycling technology and biomass feedstock under its Vision 2030, and is also investing in operational efficiencies, carbon capture technology, renewable energy, and phasing out coal to reduce Scope 1 and Scope 2 greenhouse gas emissions.

MSCI ESG Ratings aim to measure a company’s resilience to long-term ESG risks. Companies are scored on an industry-relative AAA-CCC scale across the most relevant key issues based on a company’s business model. Investors, including pension funds, sovereign wealth funds, endowments, and asset managers, commonly consider the ratings to assess financial risks in the investment process.

Source:

Indorama Ventures Public Company Limited