From the Sector

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.

Paris, February 20, 2018 – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce its partnership with Dual through the signing of a global agreement covering the Korean automotive supplier’s fabric seating and airbag businesses.

Backed by world-class research and development, Dual strives to meet evolving customer needs by offering innovative new automotive interior materials and advanced safety textiles. The supplier’s automotive trim and airbag divisions serve Hyundai-Kia Automotive Group, the fourth largest automaker in the world. Currently undergoing rapid expansion, Hyundai-Kia is counting on Dual to increase its manufacturing capabilities in the high-growth regions where the group operates, including China, Eastern Europe, Turkey and South America.

A key feature of the global agreement is Lectra’s commitment to help Dual optimize its manufacturing processes with the aim of improving its cost structure. Lectra’s most advanced technologies—Vector® for vehicle seating and FocusQuantum® for airbags—and unique expertise in cutting room processes are crucial to helping Dual reach its operational excellence objectives.

The agreement designates Lectra as sole supplier for high-ply cutting equipment and services for Dual’s seating and interiors business, and laser cutting equipment and services for the company’s airbag cushion business at six plants located in Korea and China.
For its operations in Korea and China, Dual will gain access to the full array of expertise, customer support and field services that Lectra provides worldwide. Lectra’s complete customer support structure enables maximum uptime through remote diagnostics and predictive maintenance.

“Dual will benefit most from this agreement by containing costs in the cutting room,” remarks Ong Jae-Yeol, Fabric and Seat BU Executive Managing Director, Dual. “This is precisely where Lectra’s expertise can help us gain a competitive advantage.”
“We are pleased to enter into this global partnership with Dual, to support them—not only with our best-in-class cutting technology, but also with Lectra’s expertise in cutting processes,” states Javier Garcia, Senior VP Automotive Sales, Lectra. “Our unique know-how contributes to Dual’s pursuit of operational excellence—the source of sustainable competitive advantage for car seat cover and airbag cushion suppliers.”

The two AZL Partners Conbility GmbH and Fraunhofer IPT, Aachen started their long-term cooperation for the further development and for the commercialization of Fraunhofer´s tape-placement and tape winding systems with in-situ-consolidation by the usage of laser or IR heat sources.

With this cooperation, the company Conbility GmbH makes 25 years of expertise in special machine development of tape placement systems of the Fraunhofer Institute for Production Technology IPT commercially available. Conbility offers two different tape processing systems available in different configurations.

The “PrePro 2D” machine system allows for the automated tailored tape placement of UD laminates and which can be used for subsequent thermoforming or as stiffening structures in injection molding processes. The machine comprises a rotating and translational table which is moved relatively to the applicator station. The table is scalable according to the requirements of customers. Standard table diameters are 1200 mm or 2000 mm. The applicator station can be equipped with a single or with multiple spool applicators. Because of the large process area, a 9 kW IR heater is used for the in-situ-consolidation process.  
Three in one: Three technologies included in one single modular system
Furthermore, the award-winning “PrePro 3D” tape placement and winding applicator is available as modular product with decentral control system (including closed-loop control of energy input into the processing zone) for the “plug-in” implementation in existing robot systems or machine systems by standard interfaces for the communication with the master control system. Conbility provides the single applicator as well as turn-key ready systems including the robot and handling systems.

Unique selling point of the PrePro 3D system is its multifunctional range of usage: it accomplishes laser-assisted thermoplastic tape placement, IR-assisted thermoset prepreg placement and dry fiber placement: Three technologies included in one single modular system.  

During the JEC World in Paris (March 6th – 8th 2018), Conbility GmbH will present its new “VCSEL Tape Placement and Winding Applicator” (Fig. 3), developed in cooperation with Fraunhofer IPT and Philips Photonics at the AZL Composites in Action area (Hall 5A, C55).

VCSEL Laser Systems as heat source for lower investment and process costs
This applicator uses an integrated VCSEL Laser System as heat source which has been developed by Philips Photonics. This tape placement and winding applicator can also be integrated as modular “plug-in” system into industrial jointed-arm and linear gantry robots in variable manufacturing cells. Using the new VCSEL Laser as heat source (VCSEL: Vertical-Cavity Surface Emitting Laser) leads to significant lower investment and process cost in comparison to other laser systems. Furthermore, the VCSEL laser system can accomplish controllable in-process adjustments of the laser-spot geometry as well as the intensity distribution within the spot size during the process (in-process control of laser-spot geometries and intensities) for the first time. The new system with 2 kW laser power and 10 separate emission zones which can be controlled separately will be shown at JEC World in Paris 2018 as new product of Conbility GmbH.

The 2018 Autumn Edition of Intertextile Shanghai Apparel Fabrics will take place earlier this year, with the industry’s leading trade fair running from 27 – 29 September instead of its usual October timing. It will be held again at the National Exhibition and Convention Center (Shanghai), its home since 2015. The 2017 fair played host to 4,538 exhibitors from 32 countries and regions, and 77,883 trade buyers from 102 countries and regions.

“After extensive consultation with all stakeholders over the past year, we have come to the decision to bring forward the Autumn Edition to September,” Ms Wendy Wen, Senior General Manager of fair co-organiser Messe Frankfurt (HK) Ltd explained. “The autumn / winter sourcing season has steadily moved earlier in the year, and this change in timing is necessary to ensure Intertextile Shanghai remains the leading business platform for both suppliers and buyers in the global apparel fabrics and accessories industry.”

As in previous editions, Intertextile Shanghai Apparel Fabrics will be held concurrently with Yarn Expo Autumn, fashion garment fair CHIC and knitting fair PH Value, making this the most comprehensive sourcing platform in the global industry.

More details of the Autumn Edition will be announced after the conclusion of next month’s Spring Edition, which will take place from 14 – 16 March, where some 3,300 exhibitors and around 70,000 trade buyers are expected to converge.

Baldwin Technology Company Inc.’s exclusive and innovative Precision Application System—which realizes substantial savings of water, chemistry and energy while increasing productivity—was designed with companies like HanesBrands in mind.

HanesBrands—whose venerable apparel lines include Hanes, Champion, Playtex, Bali and Maidenform, to name a few—has set significant environmental stewardship goals to reduce energy consumption and water use. The company’s recent investment in Baldwin’s Precision Application Systems, with a textile finishing technology that allows for accurate and controlled placement and therefore, reduced use of end-of-line chemicals and water, will help HanesBrands achieve its environmental sustainability goals. Additionally, Baldwin’s groundbreaking application system improves output through greater flexibility, fewer production steps and increased uptime.

Mike Abbott, HanesBrands Global Director of Research and Innovation, said: “Baldwin fulfilled our requirements to provide a solution that optimizes our productivity while reducing our environmental impact.” HanesBrands thoroughly evaluated the technology for eight months in live production conditions with positive results. Abbott continued: “During the evaluation period of the system, we have had outstanding results in productivity increase, and we can clearly see that this technology will make a great contribution to our future efficiency and sustainability savings.”

Peter Hultberg, Chief Commercial Officer at Baldwin, said: “We are honored to partner with one of the world’s strongest apparel brands to help the company achieve not only its business goals, but also its corporate responsibility goals. The trust the HanesBrands team placed in Baldwin and our innovative application technology marks an important milestone for Baldwin and our quest to redefine the standards of sustainable textile finishing.”

The HanesBrands contract includes an option to supply 15 additional Precision Application Systems. 

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

This BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98% for ten breakages a day, while a plant with three-end technology only reaches around 92%.

Faster processes due to a straight yarn path

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15% in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

Optimised key component: spinning pack

Last but not least, the engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

The product mix is decisive

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes or in general when demanding processes take up an increasing share in the business. "The product mix is decisive for the choice of technology," sums up Alfred Czaplinski, Sales Manager BCF at Oerlikon Neumag. "We are happy to advise on the optimal solution and offer both single-end and three-end plant technologies." 

Good business at the Domotex Hanover, Germany

In the run-up to the trade fair, the Domotex Hanover in mid-January was already proving to be a promising harbinger. With four lively trade fair days and contract conclusions in the lower double-digit million euro range, mainly from the European and Asian markets, the order intake for Oerlikon Neumag was very good.

Buyers looking for premium wool fabrics will be spoilt for choice at next month’s Intertextile Shanghai Apparel Fabrics. The epicentre for those with this product on their sourcing checklist is the Premium Wool Zone, with mills from the UK, Italy, France, Peru and elsewhere located here, while the Italy Pavilion also includes a number of quality wool suppliers. Rounding out the sourcing options, and adding further quality and price variety, are the 180-plus domestic wool suppliers in hall 6.1.

Some of the notable overseas brands participating this edition include Abraham Moon & Sons, Aris Industrial, Dechamps, Dormeuil, Dugdale Bros & Co, Ferla, Fratelli Piacenza, Holland & Sherry, Huddersfield Fine Worsteds, Lanificio F.lli Cerruti DAL 1881 and Scabal. The Spring Edition of the industry’s most comprehensive sourcing platform for the spring / summer season, Intertextile Shanghai Apparel Fabrics, will feature some 3,300 exhibitors from around 20 countries covering all apparel fabrics and accessories product groups.

Growing affluence in China drives demand for premium wool fabrics

While a true global marketplace for the industry’s order writers with buyers from around 100 countries expected at Intertextile Shanghai next month, much of the demand for high-end wool at the fair comes from Chinese buyers thanks to growing affluence in the country. This is evidenced by the fact that Australian wool prices are at record highs this season, with China accounting for over 70% of Australian wool exports[1]. What’s more, whereas 15 to 20 years ago most wool imported by China was re-exported, nowadays around 60% is used to produce garments for the domestic market.

Intertextile’s number one position in China ensures that high-end domestic buyers are in abundance. “The buyer professionalism here is surprisingly high,” Mr Bob McAuley, Huddersfield Fine Worsteds’ President, explained last October. “We’re looking specifically for tailors and menswear specialty stores, and these type of buyers are definitely present.” Speaking about domestic market trends, he continued: “Retailers are not able to put all fashion in stores, so the made-tomeasure market is growing, especially in China. I’m surprised each edition how many new high-end Chinese brands we meet at this fair. There’s more menswear specialty stores opening here, whereas in the US, for example, the move is more towards going direct-to-consumer and online.”

Innovation and new-season styles added to heritage brands’ collections  

Precious metals such as gold and silver are known to have been worked into garments as long as 3,000 years ago, when they were hammered into extremely thin sheets then cut into ribbons. Modern technology has made this process much more straightforward, as well as opening up new opportunities. One of these is combining wool and silver, which Holland & Sherry will exhibit at Intertextile Shanghai. Their Argento collection of Super 200's wool fabrics applies a state of the art silver ion technology finish to superfine 13.5µ merino wool. This combination provides effective antibacterial protection, counteracting bacterial odour formation and keeping the fabrics hygienic and fresh. And because the conductive properties of silver prevent the build-up of static charge, the fabrics also benefit from anti-static properties.

While most collections in the Premium Wool Zone emphasise the brands’ heritage and tradition, like Holland & Sherry, some will be introducing new or updated collections. Dugdale Bros & Co refreshed its Royal Classic superfine Australian merino wool collection last year for the first time since 1987, adding around 30 patterns drawn directly from its original archive. Abraham Moon & Sons will showcase new fabrics at the fair for spring / summer ‘19 designed by Creative Director Martin Aveyard, which take in categories of classic, casual and contemporary, with a unique use of worsted, linen and cashmere combinations.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

Loop Linen has earned the Hygienically Clean Food Service designation, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. Loop Linen is a fourth-generation family-owned linen and uniform service company located in New Orleans suburb of Westwego.

The certification confirms the laundry’s dedication to compliance and processing linens and garments using BMPs as described in its quality assurance documentation, the focal point for Hygienically Clean inspectors’ evaluation of critical control points (CCPs) that minimize risk. The independent, third-party inspection must confirm essential evidence that:
•             Employees are properly trained and protected
•             Managers understand legal requirements
•             OSHA-compliant
•             Physical plant operates effectively

In addition, Loop Linen’s facility passed three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean garments and linens and diminished presence of harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for full- and limited-service restaurants and other food service operations.

Hazard Analysis and Critical Control Points (HACCP) practices are examined in the Hygienically Clean Food Safety inspection process, evaluating the plant’s techniques for:
•             Conducting hazard analysis
•             Determining CCPs, monitoring their control, correcting them if not under control
•             Validating and verifying HACCP system effectiveness
•             Documenting and record-keeping to show ongoing conformance

Inspections also evaluate practices relevant to handling and processing textile products used in food manufacturing/processing establishments for adherence to U.S. Food and Drug Administration (FDA) and Centers for Disease Control and Prevention (CDC) directives. Introduced in January 2016, Hygienically Clean Food Service brought to linen and uniform service laundering in North America the international cleanliness standards used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

“Congratulations to Loop Linen on their certification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their dedication to building their customers’ confidence that their laundry takes every step possible to prevent human illness.”

At Milano Unica, as key inspiring article, ILUNA presented an exclusive and elegant lace long dress, created in collaboration with Valery, starting from an all over textronic ultralight lace with a complex organic design completely made of recycled materials, using ROICA™ Eco-Smart family, a world-first range of responsible made premium stretch yarns, demonstrating, once more, how the two leading innovators continue their close partnership to present the most “advanced” and responsible solutions to the market today.

Nevertheless, for ILUNA smart innovation is not just a project even, at its space at Milano Unica visitors will had the opportunity to discover the new collection and also to experience and touch the latest boundaries of lace smart innovations. This season novelties include:

1. Green Label collection, the Iluna dedicated range featuring a new responsible approach in respect of the planet and people, able to deliver innovation, beauty and quality, at 360°. This season, in addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring  new stretch Galloon laces fully made with GRS certified recycled  materials, including the stretch thanks to the introduction of the unique ROICA™ sustainable yarn part of the ROICA™ Eco-Smart family. 
2. ILUNA is also proud to introduce a worldwide première: Eco- Smart family made of sustainable yarns allover laces made with NAIA cellulosic fiber by Eastmann combined with ROICA™ premium stretch sustainable yarn   realized on warp knitting jacquard looms. A unique innovation, with an interesting look & feel combined with a special softness!  
3. ILUNA has strategically included in all their stretch laces only ROICA™ Eco-Smart family of sustainable yarns since some time. The company is pleased to introduce the latest version of this yarns that are able to deliver 3 functions in one:  premium stretch, sustainability combined with the ROICA™ Colour Perfect family function offering excellent flawless and world unique colour dimensions, homogeneity.
4. For the salon, another première:  in cooperation with ROICA™ and Cupro by Asahi Kasei, Iluna is pleased to introduce ‘Smart Bucket Bag’ as a  special  limited edition gift. In origin, this was a roomy bag shaped like a bucket taller than it is wide with a rounded bottom. It first came to fashion in the 1900's, from a pouch with a string and a hardened bottom. Federica Annovazzi idea started from the traditional shape, but it went way beyond and imade it contemporary by smart materials and manufacturing. A beautifully crafted ‘double face recipe’ made  combining a luxurious Cupro fabric by Infinity with an Iluna stretch Double face Smart Bucket bag lace designed and produced with ROICA™ Eco-Smart family of sustainable yarns. The bag is manufactured exclusively by Made in Carcere a cooperative of women in rehabilitation, so creating a useful social exchange as well as a responsible and smart one. The Made in Carcere brand was founded in 2007, thanks to Luciana Delle Donne, founder of Officina Creativa, a non-profit social cooperative.
5. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment. In addition to this, all products are Oeko-Tex 100 certified.

ILUNA’s newest digital programs:

• ILUNA has created the new e-shop offering its exclusive materials to smaller companies looking for added values as: creativity, innovation, made in Italy and responsibility. 
• The whole collection is also visible online at its web site, previous registration, and orders can be done directly online always aiming to customers care.

Today ILUNA represents the largest European lace producer, and thanks to its journey toward the most contemporary way to innovate that includes responsibility, has also become a reference point in the international market for a lace offer that is beautiful, innovative and responsible at the same time. An alchemy of design and sustainable innovation, the only eco-fashion line that includes lace and stockings, capable of combining ethics and high quality standards with a fashion image of bright and deep colors.