From the Sector

Reset
458 results
Linen, Uniform and Facility Services Customers Credited for Environmental Friendliness
13.04.2018

Linen, Uniform and Facility Services Customers Credited for Environmental Friendliness

  • Clean Green Certified Companies Commemorate Earth Day 2018

U.S. Clean Green certified laundries are marking Earth Day 2018 (April 22) by commending the 250,000+ businesses across the nation that use such certified operations for linen, uniform and facility services.

Selecting a Clean Green certified company reflects concern for maximizing sustainability in a business supply chain. Private- and public-sector organizations who choose such a provider are learning that how their reusable textiles are supplied, laundered and maintained is a factor in their environmental impact.
Clean Green operations use a third party (TRSA) to verify their conservation practices and quantify their compliance with water and energy use thresholds.

  • Clean Green Certified Companies Commemorate Earth Day 2018

U.S. Clean Green certified laundries are marking Earth Day 2018 (April 22) by commending the 250,000+ businesses across the nation that use such certified operations for linen, uniform and facility services.

Selecting a Clean Green certified company reflects concern for maximizing sustainability in a business supply chain. Private- and public-sector organizations who choose such a provider are learning that how their reusable textiles are supplied, laundered and maintained is a factor in their environmental impact.
Clean Green operations use a third party (TRSA) to verify their conservation practices and quantify their compliance with water and energy use thresholds.

Laundered, reusable linens, uniforms, towels, mats and other products provided by the linen, uniform and facility services industry to enhance businesses’ image and provide clean, safe environments for their employees and patrons. Most Americans benefit from the industry at least once per week, either at work or by patronizing restaurants, healthcare facilities, hotels and other retail and service establishments.

Nearly 50 of the industry’s companies are Clean Green certified, serving business customers from more than 150 locations combined nationwide. These launderers work with customers to connect the certification to their efforts to minimize their carbon footprint. Certified operators report to TRSA that customers and prospects ask them about green laundry initiatives. These include environmentally friendly wash chemistry, water reuse and recycling, recapturing heat from hot water headed down the drain and operating efficient delivery routes.

“They are far more likely to inquire about the sum of environmentally friendly practices as opposed to the parts,” observes TRSA President and CEO Joseph Ricci of the industry’s customers. Many document their justification of purchase decisions, though, such as government agencies that profile the winners of contract bids. “Clean Green companies bidding for their work mention the certification in their sales promotion and these profiles reflect it.”

Linen and uniform services conserve water and energy best by using high-capacity, high-efficiency equipment, he pointed out, controlling expenses and thereby aiding efforts to keep service pricing under control. “It is the perfect sustainable business model. Business interests and environmental concerns align. Improving efficiencies reduces costs and reduces the impact on the environment,” Ricci says.

Based on the U.S. Census of the industry’s sales and a TRSA survey of member financial data, the association estimates that nearly 3 million businesses use the industry’s services. Clean Green companies are challenged to capture more of these industry customers. Their collective Earth Day 2018 campaign gives them an opportunity to highlight the extent to which their individual efficiencies have contributed to a nationwide movement. Publicizing their own gains around Earth Day can better qualify and quantify their environmental virtues to encourage detailed comparison with competitors’ efficiencies, Ricci noted.

 

Ternua Group chooses Lectra Fashion PLM 4.0 (c) Tenua Group
21.03.2018

Ternua Group chooses Lectra Fashion PLM 4.0

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

The group is implementing Lectra Fashion PLM 4.0 into their entire production process. Specifically developed to help fashion companies navigate the digital era, this modular and user-friendly solution will help the Ternua Group centralize and store information coming from their brands by digitalizing their supply chain. This will connect all teams involved in the design-to-production process, regardless of geographic location. Team members will also be able to comm unicate better with external suppliers, access accurate information and keep track of every collection’s development progress. The group can hence speed up the entire production process and help their brands deliver their collections to markets all over the world on time.

“We manage our design and product development processes in-house but outsource our production in Europe, north of Africa and Asia. For our business to expand globally, we need to go fully digital. By having a system that consolidates and standardizes data coming from all supply chain actors across the world, we can respond faster to consumer demand,” explains Aitor Barinaga, Chief Operations Officer, Ternua Group. “We have assessed all other vendors—and Lectra Fashion PLM 4.0 is clearly the winner. It has the ability to fully integrate all processes and improve communication and teamwork across all departments through sound data management. We are more than happy to have a trusted partner as Lectra for such an ambitious project.”

“Ternua Group is constantly pushing the boundaries of innovation. This is shown through their desire to help customers achieve their personal best by providing them with high-performance technical wear that is also environmentally friendly. We are thrilled to embark on this new journey with the Ternua Group, and we are confident that our solution and expertise will help them get their collections out to new markets on time,” says Rodrigo Siza, Managing Director, Spain and Portugal, Lectra.

Source:

Lectra

20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION

Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

Source:

Dorothée David & Marion RISCH, Agence Apocope

(c) Messe Frankfurt (HK)
05.03.2018

European suppliers at Intertextile Shanghai the go-to option for Chinese buyers seeking quality and style

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

  • New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

  • Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
  • Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
  • Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
  • Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
  • Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

  • Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

 

Source:

Liam Rodden, Messe Frankfurt (HK)

(c) Koch Membrane Systems
28.02.2018

KPR Mill Switched to KMS PURON® MBR Technology

Wilmington, MA – March 1, 2018 - Koch Membrane Systems, Inc. (KMS), a global leader in membrane filtration technologies, announced today that it has provided PURON® Membrane Bio-Reactor (MBR) modules as part of a system upgrade to the wastewater treatment facility of KPR Mill Limited. KPR Mill is one of the largest apparel manufacturing companies in India. KPR Mill decided to upgrade their wastewater treatment facility from an old conventional plant to an advanced MBR technology due to its environmental commitment to ensure zero liquid discharge (ZLD) by recycling 100% of their wastewater. Among the key reasons for selecting the PURON® MBR modules are its unique design, including single header and central aeration, reliable and consistent operation, and strong after-market support from KMS.
 

Wilmington, MA – March 1, 2018 - Koch Membrane Systems, Inc. (KMS), a global leader in membrane filtration technologies, announced today that it has provided PURON® Membrane Bio-Reactor (MBR) modules as part of a system upgrade to the wastewater treatment facility of KPR Mill Limited. KPR Mill is one of the largest apparel manufacturing companies in India. KPR Mill decided to upgrade their wastewater treatment facility from an old conventional plant to an advanced MBR technology due to its environmental commitment to ensure zero liquid discharge (ZLD) by recycling 100% of their wastewater. Among the key reasons for selecting the PURON® MBR modules are its unique design, including single header and central aeration, reliable and consistent operation, and strong after-market support from KMS.
 
KPR Mill has been using a conventional Effluent Treatment Plant (ETP).  Their old technology involved high chemicals consumption which required high maintenance levels, resulting in frequent production shut downs due to ETP failures.  The new MBR plant is designed to handle 3000 m³/day of textile effluent, utilizing two MBR trains. Initial results show that KPR Mill has reduced chemical costs and eliminated downtime, maximizing textile production. In addition to savings in operational cost and production optimization, KPR strives for an eco-friendly textile processing system. KPR’s selection of PURON® membranes help them achieve their goals of environmental sustainability.
 
“The membrane bioreactor technology from KMS operates very reliably and has resulted in a significant reduction of chemical, operating and maintenance costs of about 10%,” said Mr. C.R. Ananda Krishnan, executive director of KPR Mill Limited. “And as we are a trend setter in using eco-friendly advanced technologies, we were happy to have PURON® MBR as a technology partner who fits our needs and our vision.”
 
“KMS has developed advanced membrane solutions for the textile industry,” said Mr. Manny Singh, President of KMS. “Our products and services help the industry treat wastewater to meet strict discharge and reuse targets, and create value through various chemical recovery processes.”

Source:

Rob Carlton, Koch Membrane Systems

Lectra ESCP Europe (c) Lectra
27.02.2018

Technology propelled by Industry 4.0 brings new opportunities for the fashion industry

  • Lectra – ESCP Europe ‘Fashion & Technology’ Chair round-table event hears panelists emphasize the need for fashion companies to embrace Industry 4.0.

Paris, February 27, 2018 – Lectra, the technological partner for companies using fabrics and leather, the French business school ESCP Europe and their joint ‘Fashion & Technology’ Chair explored the impact of Industry 4.0 on fashion’s value chain during a recent insightful round table discussion at ESCP Europe’s London campus.
For the participants Robert Diamond, Founder and CEO, Fernbrook Partners; Dan Hartley, Global Head of Digital Commerce, AllSaints; Laëtitia Hugé, Vice-President, Product Marketing, Lectra; Pierre Mercier, Senior Partner and Managing Director, Boston Consulting Group; and Evelthon Vassilou, CEO, Alison Hayes, there was consensus. Industry 4.0 represents unparalleled opportunities to take the fashion industry forward.

  • Lectra – ESCP Europe ‘Fashion & Technology’ Chair round-table event hears panelists emphasize the need for fashion companies to embrace Industry 4.0.

Paris, February 27, 2018 – Lectra, the technological partner for companies using fabrics and leather, the French business school ESCP Europe and their joint ‘Fashion & Technology’ Chair explored the impact of Industry 4.0 on fashion’s value chain during a recent insightful round table discussion at ESCP Europe’s London campus.
For the participants Robert Diamond, Founder and CEO, Fernbrook Partners; Dan Hartley, Global Head of Digital Commerce, AllSaints; Laëtitia Hugé, Vice-President, Product Marketing, Lectra; Pierre Mercier, Senior Partner and Managing Director, Boston Consulting Group; and Evelthon Vassilou, CEO, Alison Hayes, there was consensus. Industry 4.0 represents unparalleled opportunities to take the fashion industry forward.

From brand to manufacturer, panelists from across the value chain emphasized the necessity for the industry to embrace the alliance between man and machines to leverage massive benefits, from quicker decision-making to cost-reduction.
Exploring the advantages of Industry 4.0 technology, Evelthon Vassilou commented: “Interpreting the data of what is, and isn’t, selling should help to speed up decisions. You can react very quickly across the entire supply chain, and either stop producing something unsuccessful or ramp up production if successful. Data and data analytics is not sufficient, to succeed this also requires a high degree of trust and integration between retailers and suppliers.”

“It’s about using technology to deliver continuous improvement in everyday business,” said Robert Diamond. “People are not good at making a large volume of repeatable decisions with many different data inputs”. Identifying where machines, and where people, bring value is an important part of embracing Industry 4.0. “If the business decision, or the outcome of the resolution tomorrow, is pretty much the same as what happened yesterday, then there is a chance for machine learning to help improve the situation.”
For Pierre Mercier, technology propelled by Industry 4.0 is disrupting former sources of competitive advantage, “forcing companies to rethink how they want to compete in their respective industries, and how to use data to compete differently. The common denominator in the fashion ecosystem is that everyone is facing the opportunity for a step change and need to figure out where to double down and accelerate their transformation.”

“Agility and flexibility are increasingly important for fashion players. Cutting-edge technology is supporting the fashion industry as it steps into the 4.0 era, ensuring businesses have the right solutions in their own ecosystems, to effectively harness the right data to make the right decisions,” stated Laëtitia Hugé.

At UK fashion brand AllSaints, valuable data harnessed from the net promoter score is paramount for their business. “We take customer feedback very seriously and we use it as a framework for our internal roadmap - from a tech and development point of view, through to design and fit, the customer is at the heart of everything we do,” stated Dan Hartley. In addition, he underlined that using technology across communications “will be huge going forward for AllSaints. From supply chain to store teams, we aim to use a cloud-based system that works within our own eco-system, complementing our agile model.”
The round table was moderated by the co-director of Lectra-ESCP Europe ‘Fashion and Technology’ Chair Valérie Moatti.
 

More information:
Lectra-ESCP Europe Industry 4.0
Source:

Lectra, Nathalie Fournier-Christol

Logo FAIR PLAY (c) Brian Dowling
25.02.2018

FAIR PLAY. RESPECT, LOYALTY, INTEGRITY, NOBILITY, COURAGE, FRIENDSHIP.

„We want to give new generations the opportunity to understand the principles that are - and always will be - essential to us, so that every individual can achieve his or her potential”- Lando Simonetti - La Martina Founder.

La Martina launcht FAIR PLAY, eine von Danilo Paura, Jacopo Pozzati und Leonardo Colacicco entworfene Capsule Collection, die auf der Mailänder Fashion Week zum ersten Mal präsentiert wurde. Die Weltpremiere wurde am 23. Februar mit einer exklusiven Party und einer Live-Performance von Ne-Yo gefeiert.
Nationale und internationale Gäste folgten der Einladung von La Martina-Gründer Lando Simonetto ins Teatro Manzoni. Darunter beispielweise Schauspielerin Mirja du Mont, Model Kim Hnizdo, Model Benjamin Melzer sowie die beiden Influencer Alexandra Lapp und Valentina Ferragni, Schauspieler Jimi Blue Ochsenknecht sowie Noah Becker, Designer, DJ und Musiker.

„We want to give new generations the opportunity to understand the principles that are - and always will be - essential to us, so that every individual can achieve his or her potential”- Lando Simonetti - La Martina Founder.

La Martina launcht FAIR PLAY, eine von Danilo Paura, Jacopo Pozzati und Leonardo Colacicco entworfene Capsule Collection, die auf der Mailänder Fashion Week zum ersten Mal präsentiert wurde. Die Weltpremiere wurde am 23. Februar mit einer exklusiven Party und einer Live-Performance von Ne-Yo gefeiert.
Nationale und internationale Gäste folgten der Einladung von La Martina-Gründer Lando Simonetto ins Teatro Manzoni. Darunter beispielweise Schauspielerin Mirja du Mont, Model Kim Hnizdo, Model Benjamin Melzer sowie die beiden Influencer Alexandra Lapp und Valentina Ferragni, Schauspieler Jimi Blue Ochsenknecht sowie Noah Becker, Designer, DJ und Musiker.

This is FAIR PLAY.
Die Capsule Collection ist eine Kombination aus Heritage und urbaner Streetwear-Vision. Die Looks der drei jungen und kosmopolitischen Nachwuchsdesigner sind modern, dynamisch und ikonisch. Das Design verkörpert kreatives und subversives Denken für eine neue Zielgruppe. Ganz nach dem Motto: Urbane Ästhetik und klassische Sportmotive treffen auf den Minimalismus der 90er Jahre.

FAIR PLAY LA MARTINA - CAPSULE COLLECTION
„In einer Zeit, in der die konventionellen Hierarchien von Mode und Streetwear und die Besonderheit ihrer Rollen neu gemischt werden", erklärt La Martina CEO Enrico Roselli, „haben wir unseren Lifestyle in eine ikonische Capsule Collection übertragen und die Marke mit stilistischer Reife weiterentwickelt - ohne dabei unsere Markenidentität aus den Augen zu verlieren".

Mit FAIR PLAY präsentiert La Martina eine Kollektion, die aus 18 Kleidungsteilen besteht, die über die Saison hinausgehen und die sich unkonventionell miteinander kombinieren lassen. Einige davon sind unisex und passen sich an jede Jahreszeit an.
Der Streetwear Look der neuen Capsule Collection steht für Bomberjacken aus Denim oder Nylon sowie eine Neuinterpretation des klassischen Paltò-Mantels, der in einer neuen Oversize Version präsentiert wird. Seine Form wird durch den zusätzlichen Mehrfarbenschutz an den Ärmeln verstärkt, der ein typisches Merkmal der Polo-Stiefel ist.

T-Shirts, Hoodies und Trainingsanzüge aus Baumwoll-Fleece sowie übergroße Pullover und Hosen aus Denim oder Fleece ergänzen die Kollektion. Danilo Paura, Jacopo Pozzati und Leonardo Colacicco spielen mit farbigen Bändern, versehen die einzelnen It-Pieces seitlich mit dem FAIR PLAY Logo oder setzen die historischen La Martina Patches modern in Szene. Das kultige Polo-Shirt ist aus schwerem Jersey und präsentiert sich in intensiven, bunten Nuancen.
Die Farbpalette der Capsule Collection ist äußerst vielfältig und reicht von hellen Tönen, Smaragdgrün, leuchtendem Rot und Orange bis hin zu subtilen Schattierungen von Weiß, Burgunderrot, Blau und Moosgrün. Die Farbkombination unterstreicht die zeitgenössische und großstädtische Attitude, die die gesamte Kollektion außergewöhnlich und unverwechselbar macht.

FAIR PLAY ist eine Mischung aus Tradition und Moderne mit Blockfarben, einzigartigen und maßgeschneiderten Details sowie gestickten Grafiken und Patches. Eine neue Ästhetik, die von der Welt des Polo-Sports inspiriert ist, aber die einzelnen Designs dieser Kollektion in ikonenhafte Streetwear-Styles verwandelt: Cool und originell! Eine Capsule Collection für „Millennials”, „Hypebeasts” und La Martina Liebhaber.

Source:

PR + Presseagentur textschwester

21.02.2018

Filatura C4 is a Re.Verso™ partner of excellence

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

For the first time at FILO Milano, Filatura C4 is proud to present, in addition to the already established Re.Verso™ collection for contract, the Blue Drop winning fabric by Audejas, made with Re.Verso™ re-engineered wool. A result born from the shared commitment and vision to integrate a new generation of eco values into their circular economy creations.

Since 1962, Filatura C4 has been known for smart innovation in furnishing contract markets and is now specializing in the recovery of both technical and natural fibers. The company offers a wide range of styles and typologies of yarns for the Technical, Natural and Classic categories. From the choice of raw materials up until the final packaging, Filatura C4 develops and proposes, together with its partners, tailored solutions apt to satisfy a diversified demand. Thanks to its background and its grounding, Filatura C4 is a unique partner for Re.Verso™ in the contract sector.

The collection was planned to satisfy the market’s increasingly more specific needs, which require increased specialization and responsibility in the recovery of textile fabrics. Thanks to the Re.Verso™ system, the company offers quality products with low environmental impact through the use of pre-consumer wool packaging cuts which are collected, selected and processed in an accredited, fully transparent and traceable way. The Re.Verso™ collection is mainly employed in contract and home furnishing.

The Re.Verso™ product is available in a range of counts going from 5,000 to 9,500 Nm and it can be supplied both in singles and in twisted plies.  Re.VersoTM yarns by Filatura C4 are certified by ICEA (Environmental and Ethical Certification Institute) according to GRS (Global Recycled Standard) issued by the international body Textile Exchange and can boast unique savings (in comparison to virgin wool) in terms of energy (-27%), water consumption (-53%), and CO2 emissions (-49%), as certified by the LCA (Life Cycle Assessment) study led by Prima Q.

At Filo, Filatura C4 presents the prizewinning product signed by Audejas, leading Lithuanian producer of upholstery and home textile fabrics since 1946, made for the 75% of wool (55% Re.Verso™ wool) in mix with 20% polyamide and 5% other fibres. This product received the Blue Drop Award on the second day of MoOD 2017. MoOD Brussels is an exhibition dedicated to producers of upholstery, window and wall coverings for the residential and contract market. The Blue Drop exhibition is an inspiring overview of the “best of the best” of what you can find at MoOD selected from creations submitted by exhibitors. Unique in its own way because it is the world’s only quality label of its kind for interior textiles. The “Floris” fabric by Audejas, won the first prize of the Circular Material category, being recognized as a  product that made great effort reducing waste by focusing on eco-centric materials.

Archroma at Première Vision © Archroma
Color Atlas by Archroma®.
06.02.2018

Archroma brings to Première Vision its eco-oriented Approach

Première Vision has once again been chosen by Archroma to present its developments combining creativity, technology, and sustainable approach. Color Atlas - Archroma's innovative color system dedicated to designers, brands, retailers, and the whole industry - confirms itself as the ideal tool to bring fashion inspiration to life, enhancing functionality in all stages of the process

Archroma, a global leader in color and specialty chemicals, will showcase the latest in its advanced color-management solutions at Première Vision Paris, Hall 6 Booth 6U2. The Color Atlas system will also be featured in MintModa’s SS19 seasonal inspirations, presented on February 14, 2018 at Hall 5, Room 504, at 3pm and 4pm.

Color Atlas: a game-changing system for fashion design

Première Vision has once again been chosen by Archroma to present its developments combining creativity, technology, and sustainable approach. Color Atlas - Archroma's innovative color system dedicated to designers, brands, retailers, and the whole industry - confirms itself as the ideal tool to bring fashion inspiration to life, enhancing functionality in all stages of the process

Archroma, a global leader in color and specialty chemicals, will showcase the latest in its advanced color-management solutions at Première Vision Paris, Hall 6 Booth 6U2. The Color Atlas system will also be featured in MintModa’s SS19 seasonal inspirations, presented on February 14, 2018 at Hall 5, Room 504, at 3pm and 4pm.

Color Atlas: a game-changing system for fashion design

How many shades can creativity have? The Color Atlas by Archroma®, through no less than 4,320 hues and color swatches, truly gives shape to any imagination. This is Archroma Color Management’s groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools:

  • The Color Atlas Library is the six-volume physical reference to the 4,320 color swatches and cotton poplin samples, secured yet easily removable and absolutely intuitive to be browsed thanks to the accordion-fold design of the catalogues. A compact edition of the Color Atlas is also available, including the very same color variety while being slimmed down from six to two volumes for increased portability.
  • Color Atlas Online is the mobile-friendly designer’s companion to find the perfect color matching while on-the-go or in the office. Through this feature, it’s possible to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly. A new patent-pending technology powered by NFC, exclusively introduced by Archroma, also adds swatch-specific information to each Engineered Color Standard, giving retailers, brands, and mills instant access to dye recipes and more color information than ever. The online system also allows to create personal special collections of colors or products that can also be shared, both internally and with suppliers.

The colors of SS19 trends by MintModa, in collaboration with Archroma

During Première Vision, SS19 seasonal inspirations by MintModa will also highlight the main trends for the new collections, with color ranges referenced using Color Atlas by Archroma®.
On February 14, both at 3pm and 4pm at Hall 5, Room 504, Sharon Graubard (Founder/Creative Director of MintModa) will introduce a highly visual and emotive presentation that captures the zeitgeist with four compelling SS19 color and style narratives. Each design story is told with evocative, style-centric imagery from global runway and street, consumer profiles, beauty and wellness, art, architecture, and other culturally impactful touchpoints. This presentation identifies emerging influences relevant to all design industries.
A limited-edition MintModa x Archroma SS19 color card will be distributed to all attendees.

Sanitized®Odoractiv 10 (c) SANITIZED AG
Sanitized®Odoractiv 10
16.01.2018

Goodbye „Permastink“! Innovative odor-management for functional polyester textiles

Sanitized®Odoractiv 10 with patented, dual-action technology

SANITIZED AG presents a new unique dimension to odor-management for functional polyester textiles. The newly developed wash-resistant Sanitized®Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn. The underlying technology that has been further developed was awarded the Swiss Technology Award. Goodbye permastink!

Sanitized®Odoractiv 10 with patented, dual-action technology

SANITIZED AG presents a new unique dimension to odor-management for functional polyester textiles. The newly developed wash-resistant Sanitized®Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn. The underlying technology that has been further developed was awarded the Swiss Technology Award. Goodbye permastink!

Manufacturers of functional polyester textiles from all over the world face the same challenge: freshly washed garments develop an unpleasant odor even after a short wearing period. The cause of this undesirable effect is not the human perspiration itself, but the bacteria that break down the perspiration. This process of decomposition generates the characteristic sweet, pungent smell. Once the bacteria, or the odor molecules, have penetrated into the surface of the polyester textile, they remain there permanently. Machine wash cycles and special detergents will never completely eliminate them. The bacterial colonization produces a biofilm on the polyester, which not only causes unpleasant odors, but also has a negative impact on the properties of the material.

Surface modulation with anti-adhesive properties
This is exactly where the new, dual-action technology from SANITZED AG comes into play: the surface of the textile is "coated" with Sanitized®Odoractiv 10 in the padding process. This creates a protective film on the surface of the textile. The bacteria use this anti-adhesive protective film as the basis for latching onto the garment. The bacteria can therefore be completely washed out in a normal wash cycle, consequently preventing any biofilm from forming. An anti-adhesion test method was developed in cooperation with EMPA to prove this Wash Effect.

The second advantage: Sanitized®Odoractiv 10 has a high adsorbing effect. Odors are "trapped" and removed during a normal wash cycle. The new product is the result of a technology that has been further developed and was awarded the Swiss Technology Award. The odor adsorption is identified using GC-MS.

As the Product Manager at SANITIZED AG, Urs Zihlmann, succinctly puts it: "Sanitized®Odoractiv 10 marks the end of permastink in polyester textiles." Sanitized®Odoractiv 10 can be combined with other Sanitized®products, in particular with products based on zinc pyrithione. The treatment does not influence the feel of the final treated textile.

Wash-resistant, sustainable and still "no nano"
The odor-reducing function is clearly still going strong even after 50 wash cycles. This is even the case if garments are washed at 30°C, either by hand or in the machine, meaning consumers save on water and energy, not to mention that the piece of clothing will look great for longer.

As with all its other products, SANITZED AG does not use any nano technology. The Hohenstein Institute has awarded the company the rating Skin Friendly, the bluesign®registration is underway. The product also bears the label Eco Passport by OEKO-TEX®.

"The unique, dual Odor Control Function of Sanitized®Odoractiv 10 enjoys a unique position in the market and it furthermore fulfills two market requirements: the prevention of permastink and the minimization of odor intensity during wear. Almost all manufacturers of functional polyester textiles are confronted with this problem," commented Urs Zihlmann. "The new technology creates tangible added value for consumers. This is a competitive differentiating
advantage for global marketing."

As with all other products, the service provided by SANITIZED AG includes technological advice before and during production, in the definition of the verified efficacy and in the use of the Sanitized®Ingredient Brand for promotional purposes.

Source:

PR-Büro Heinhöfer

Unique ROICA™ Premium Stretch Innovations @ ISPO Brandnew Village © ROICA™
18.12.2017

Unique ROICA™ Premium Stretch Innovations @ ISPO Brandnew Village

  • Unique ROICA™ Premium Stretch Innovations for the Active Wardrobe Debuts @ ISPO Brandnew Village
  • Hall B4, Booth No. B4.430 BN 02 Munich 28th-31th January 2018

Come and enjoy a real dedication to Responsible Innovation and Wellbeing in our new ROICA™  booth experience for Fabric Innovation inspiring the ROICA™ Active Wardrobe and the international ROICA™ Closet. Together, they will guide you to new hi-tech performance solutions in our partners unique stretch ideas, designed to meet both contemporary business and astute consumer desires. These latest ROICA™ innovations will be presented within the special ISPO BrandNew arena, a new high visibility concept of creativity revealed inside ISPO that truly matches the core DNA and values of the ROICA™ premium stretch brand.

ROICA™ will present The Modern Wardrobe concept in 3 distinct dimensions.

Together they bring to life our new stretch solutions that fit the supply chain for our target consumer confirming a clear brand identity that redefines performance creativity.

  • Unique ROICA™ Premium Stretch Innovations for the Active Wardrobe Debuts @ ISPO Brandnew Village
  • Hall B4, Booth No. B4.430 BN 02 Munich 28th-31th January 2018

Come and enjoy a real dedication to Responsible Innovation and Wellbeing in our new ROICA™  booth experience for Fabric Innovation inspiring the ROICA™ Active Wardrobe and the international ROICA™ Closet. Together, they will guide you to new hi-tech performance solutions in our partners unique stretch ideas, designed to meet both contemporary business and astute consumer desires. These latest ROICA™ innovations will be presented within the special ISPO BrandNew arena, a new high visibility concept of creativity revealed inside ISPO that truly matches the core DNA and values of the ROICA™ premium stretch brand.

ROICA™ will present The Modern Wardrobe concept in 3 distinct dimensions.

Together they bring to life our new stretch solutions that fit the supply chain for our target consumer confirming a clear brand identity that redefines performance creativity.

1 ROICA™ ACTIVE WARDROBE: Come and see leading commercial fashion ranges ready for the Summer 2018, that include the ROICA™ Eco Smart family and the ROICA™ Feel Good family of unique premium stretch yarn solutions.

2 ROICA™ INNOVATION: Here you can find the latest textile performance innovations from our partner mills to inspire even more brand creativity.

The ROICA™ Fabric Gallery is a rich and varied fabric offer that focuses on:
•    The revolutionary ROICA™ Eco Smart family of sustainably designed stretch yarns. These yarns are either GRS certified, or have the Cradle-to-Cradle Innovation Institute GOLD LEVEL certificate for material health, plus the Hohenstein Environment Certificate, where at its end-of-life, it smartly breaks down releasing less harmful materials. These unique commercialized solutions suites for intimates, athleisure, sportswear, and more.
•    The unique ROICA™ Feel Good family promises a new level of performance with ‘feel-good comfort’ and freshness. The ROICA™ CF yarn delivers an odor-neutralizing durable function in wash and wear because its active ingredient is locked inside the yarn and only requires a modest % to perform in most fabric structures.
•    A new ROICA™ Stretch Energy™ is a truly verified heat-generating system that combines a customised ROICA™ polymer with special fabric structures where a stretch and recovery action produces real warmth, maintaining support during exercise.

3 ROICA™ CLOSET: In this zone you can explore new ROICA™ garment designs from our experimental laboratory, using innovative Japanese fabric creativity.

Also at our ROICA™ booth, you will be able to explore sister brand Cupro innovations, designed responsibly for a new, luxe view of athleisure sportswear.

Today, the ROICA™ premium stretch brand sets the highest quality standards that are uniquely specialized and certificated perfectly focused on responsible performance for the active sportswear, swimwear and athliesure wear categories, making it the ‘smart-fit’ for the ISPO BrandNew Village presentation.

More information:
ROICA ISPO Brandnew Village
Source:

GB Network Marketing & Communication

34rd International Cotton Conference Bremen 2018 Die Bremer Baumwollbörse
Logo Bremer Baumwollbörse
15.11.2017

34rd International Cotton Conference Bremen 2018

  • 'Cotton Insights' Looks to the Future
  • Register now!
  • Save the Date! The countdown has started for the renowned International Cotton Conference, which will take place from 21st to 23rd March 2018 in Bremen.

As its theme 'Cotton Insights' illustrates, the Cotton Conference will provide a deep insight into the world of cotton, determine future challenges and offer solutions. Solutions that are not only important for the specialised cotton world, but also for the entire cotton supply chain from processing to textile retailing, because they focus on the needs of the end consumer.

The conference traditionally takes place in the historic Town Hall of the Hanseatic City of Bremen, in the immediate vicinity of the Cotton Exchange. Once again, more than 450 participants from around the world are expected. The Bremen Cotton Exchange and the Fibre Institute Bremen are the joint hosts of the Conference.

  • 'Cotton Insights' Looks to the Future
  • Register now!
  • Save the Date! The countdown has started for the renowned International Cotton Conference, which will take place from 21st to 23rd March 2018 in Bremen.

As its theme 'Cotton Insights' illustrates, the Cotton Conference will provide a deep insight into the world of cotton, determine future challenges and offer solutions. Solutions that are not only important for the specialised cotton world, but also for the entire cotton supply chain from processing to textile retailing, because they focus on the needs of the end consumer.

The conference traditionally takes place in the historic Town Hall of the Hanseatic City of Bremen, in the immediate vicinity of the Cotton Exchange. Once again, more than 450 participants from around the world are expected. The Bremen Cotton Exchange and the Fibre Institute Bremen are the joint hosts of the Conference.

"We used the time after the end of our Cotton Conference in March 2016 to carefully analyse market developments and determine current topics and areas of activity that are of intense concern to the industry. They are of great benefit to the participants, so it's worth the visit", emphasise Elke Hortmeyer, Director of Communications and International Relations at the Cotton Exchange and Axel Drieling, Senior Manager Cotton at the Fibre Institute Bremen.

The subjects range from traceability and authenticity testing of cotton, to new requirements for cotton quality, process optimisation through digitalisation, future trends and production and, last but not least, the status of the sustainability debate. In all segments, the Conference offers informative lectures and panel discussions which appeal to a wide audience and are of overriding interest. Separate forums are offered for experts in the fields of science and research.

On Tuesday, March 20th, prior to the International Cotton Conference, the publisher and editors of the leading national daily newspaper “Weser Kurier” invite participants to their economic summit 'Sustain', in cooperation with the Bremen Cotton Exchange. Here, an expert forum will discuss development prospects on the African continent. As is well-known, almost 55 million people in Africa live from cotton cultivation which will be one of the focal points.

As of now, potential interested parties will receive up to date and detailed information about the Conference content and its subjects on the Conference homepage, as well as in regular newsletters and, moreover, by active press work. It is already possible to register for the Conference online and to make hotel bookings via the Bremen Tourist Office. Please, find further information here: http://cotton-conference-bremen.de/
 

More information:
Bremer Baumwollbörse
Source:

Die Bremer Baumwollbörse

Beaulieu Yarns received the Highly Protected Risk (HPR) Award at a ceremony on November 7, 2017 attended by all staff, and representatives of B.I.G. Management, Beaulieu Yarns Management and FM Global Management. © Beaulieu International Group
Beaulieu Yarns receives HPR Award
08.11.2017

Beaulieu Yarns awarded prestigious FM Global “Highly Protected Risk” (HPR) status for French production site

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Ideal Fibres & Fabrics Comines is the second in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Wielsbeke, Belgium – Beaulieu Yarns, the global supplier of high-quality polyamide and polypropylene yarns, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its French production site, Ideal Fibres & Fabrics Comines. Awarded by FM Global, HPR designation means a facility meets the highest industry standards for property protection.

  • HPR is the highest status a plant can achieve for fire risk prevention and protection
  • The site Ideal Fibres & Fabrics Comines is the second in the Beaulieu International Group to reach HPR status
  • Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Wielsbeke, Belgium – Beaulieu Yarns, the global supplier of high-quality polyamide and polypropylene yarns, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its French production site, Ideal Fibres & Fabrics Comines. Awarded by FM Global, HPR designation means a facility meets the highest industry standards for property protection.

FM Global, Beaulieu International Group’s (B.I.G.) industrial property and business interruption insurer for the past two years, offers a unique concept that supports the Group in reducing its exposure to loss and increases its business resilience. A dedicated worldwide team of engineers focuses on providing assistance and protection of its assets, helping the Group to achieve a higher level of risk protection.

The Ideal Fibres & Fabrics Comines site produces high quality yarns for a large variety of application and market segments including the automotive industry. It scored exceptionally well in its FM Global assessment which focused on aspects including fire protection, protection against natural hazard, mechanical breakdown of machinery and also cyber risks.

Its overall risk mark of 76 ranks it within the top 25% of its industry for fire risk prevention and protection.

Commenting on the Award, Emmanuel Colchen, Global Sales Director Yarns within BU Beaulieu Engineered Products, said: “This HPR yarn production site reinforces strongly our supply chain security and demonstrates our engagement towards our customers and partners. Our contingency planning and risk management are essential, well-considered elements within our long-term business strategy to demanding sectors such as Automotive and Commercial & Residential floor covering contracts.”

Ideal Fibres & Fabrics Comines is the second facility in the Group to attain HPR status, and the very first in Europe. Pinnacle Polymers LLC in the USA also achieved the HPR as a chemical plant, which is a rare achievement within the chemical business. Fire risk prevention is part of the Group’s broader risk management activities. B.I.G. is investing in increasing the level of protection at all B.I.G. plants in order to protect its business continuity.

The divisions of B.I.G. are also implementing a number of safety programmes to raise awareness of workplace safety and to maintain strong safety records.

Karena Cancilleri, Vice President BU Beaulieu Engineered Products, commented: “I am proud of Beaulieu Yarns for achieving the highly-regarded FM Global HPR Award and setting an example for the whole Beaulieu International Group. This positive step reflects the strong commitment of the Engineered Products division and the rest of the Group to improving safety and protecting our workplaces and our production facilities.”

Beaulieu Yarns received the HPR Award at a ceremony on November 7, 2017 attended by all staff, and representatives of B.I.G. Management, Beaulieu Yarns Management and FM Global Management.

Intertextile Shanghai Messe Frankfurt Exhibition GmbH
31.10.2017

Intertextile Shanghai Autumn 2017 - Final Report

Intertextile Shanghai concluded its 2017 Autumn Edition on 13 October as the strong business results and praise from the worldwide participants once again affirmed its reputation as the world’s most effective apparel fabrics and accessories trade event in terms of boosting sales and product sourcing. Knowing the fair covered an all-encompassing range of products that cater to all sourcing needs, 77,883 buyers travelled from 102 countries and regions (2016: 73,927, 90 countries and regions) to Shanghai to source. This year, Hong Kong, India, Indonesia, Italy, Japan, Korea, Russia, Taiwan, the UK and the US were the top 10 visitor countries and regions after Mainland China.

Intertextile Shanghai concluded its 2017 Autumn Edition on 13 October as the strong business results and praise from the worldwide participants once again affirmed its reputation as the world’s most effective apparel fabrics and accessories trade event in terms of boosting sales and product sourcing. Knowing the fair covered an all-encompassing range of products that cater to all sourcing needs, 77,883 buyers travelled from 102 countries and regions (2016: 73,927, 90 countries and regions) to Shanghai to source. This year, Hong Kong, India, Indonesia, Italy, Japan, Korea, Russia, Taiwan, the UK and the US were the top 10 visitor countries and regions after Mainland China.

Meanwhile, a total of 4,538 exhibitors from 32 countries and regions (2016: 4,553, 29 countries and regions) also enjoyed the surge of business potential brought by this large number of high-quality trade buyers. The strong line-up of exhibitors, including 10 country and region pavilions – France, Germany, Hong Kong, India, Japan, Korea, Milano Unica (Italy), Pakistan, Taiwan and Thailand – as well as 10 Group Pavilions organised by foremost industry leaders like DuPont, Hyosung, INVISTA and Lenzing, presented a full-spectrum of innovative and fashion offerings in 11 halls across 276,000 sqm (gross) exhibition area, an increase of nearly 6% compared to 2016.

While the nature of textile trade fairs has evolved over recent years, exhibitors’ successful results at this year’s Intertextile Shanghai shows that it is still the industry’s most effective order-writing and business development trade show because it remains the event where the global industry gathers to make purchasing decisions. As a result, many exhibitors see the fair as their business growth engine, and reported positive outlooks for sales after the fair.

 

Exhibitor opinions
 Ms Erika Jimenez, Development and Purchasing Department, Luca Cuccolini, Spain (SalonEurope)
“A few years ago we decided to explore the Chinese market. Knowing that Intertextile Shanghai is the most comprehensive fair of its kind in Asia, there was no doubt that this would be the fair to expose our brand. Throughout the years we have been satisfied with the visitor flow and business opportunities, especially this year. There has been a good flow of a diverse range of buyers visiting our booth, and we’ve already met with abundant potential buyers on the first day. Our objective is still to get our brand known to local buyers, and by looking at the progress in the first two days, we are even expecting to get orders later on.”

Mr Jean Denerolle, General Manager, Dormeuil, France (Premium Wool Zone)
“There has been lots of visitors coming to our booth on the first two days. Joining Intertextile Shanghai is an effective ways for us to develop the Chinese market. We are happy that the organiser referred a VIP buyer to us. Overall, we succeeded in receiving orders and promoting our brands, so I am pleased with the result this year.”
Mr Max Deery, Global Director, Print Stories Ltd, (for Amanda Kelly Ltd), UK (Verve for Design)
“We are satisfied with the results this year. The Verve for Design zone is well organised, and it’s a busier year compared to last. After day one, we’ve already found more than 10 potential buyers, both old and new customers. We’ve participated in other fairs in Europe as well, and I would say Intertextile Shanghai is in line with these shows, and busier than we expected.”

Mr Luca Maderna, New Age srl, Italy (Verve for Design)
“It’s our 10th year exhibiting in Intertextile. Given the large scale, we can always find new contacts here, and it’s also a great opportunity for us to present our new collection to our regular customers.”
Mr Ederhard Ganns, Managing Director, Union Knopf (HK) Ltd, Germany
“Our target clients are mainly brand owners and resellers. I have successfully met with them and have some promising contacts. We have also developed some new connections with both domestic and overseas customers. Intertextile Shanghai is no doubt the world’s number one show.”

Ms Kang Nan Hee, Assistant Manager, R&D Textile Co Ltd, Korea (Korea Pavilion)
“This is our 10th year at Intertextile Shanghai. Every year, we participate in both the spring and autumn fairs and they have never let us down. Not only can we meet numerous new buyers in each edition, we can also keep pace with the ever-changing market trends in the fabric industry. Besides that, in terms of visitor flow, this fair has always been the strongest. Take this year’s fair as an example. In our estimation, we have already received enquiries from almost 300 buyers and agents on the first two days, which has exceeded our expectations. Therefore, we are expecting some 400 orders in total by end of the fair.”

Mr Taku Ito, Manager, Sojitz Vancet (Shanghai) Trading Co Ltd, Japan (Japan Pavilion)
“We exhibit at this show to find new customers and sales channels in China. We’ve been joining the show for a while now, and we continued this edition as we can always meet new customers – I mean, really ‘new’. This year, there were about 400 companies that visited our booth. It’s also interesting that we are getting more online apparel shops visiting us lately.”

Ms Susan Hon, B2B Marketing Communication Director, North Asia, INVISTA Co Ltd, Hong Kong (Functional Lab & Group Pavilion organiser)
“With the help of Intertextile Shanghai – the most well-known platform in the industry – we can promote our newly launched products more efficiently and enhance the influence of our brand. Our booths were packed with visitors over the three days, with many of them high-quality buyers. Intertextile has always been one of the most important trade fairs for us because of its strength in attracting a wide range of buyers, including an unrivalled number of market-leading brands that no other fairs can offer.”

Mr Martin Yang, Marketing Manager, Nilit Nylon Technologies (Suzhou) Co Ltd, Israel (Functional Lab)
“Our management is satisfied with the results as this is where we can boost our business and sales. On the first day, we’ve already met with nearly 20 potential buyers that are very likely to develop into new orders after the fair. The most attractive trait of Intertextile Shanghai is its ability in gathering large numbers of trade buyers. More importantly, the majority of them are quality buyers who aren’t only our target customers but also keen to place orders. This fair is seen by the industry as the major platform to source as it includes more industry leading suppliers, raw material providers, fabric mills and garment manufacturers compared to other similar fairs, and this is why we are here.”

Mr Syed Kamran Shah, Marketing Manager, Soorty Enterprises (Pvt) Ltd, Pakistan (Beyond Denim)
“Our objectives are to establish connections with Chinese brands and manufacturers, as well as to learn buyers’ expectations in this market. We are happy with the visitor numbers, and Intertextile Shanghai is where buyers really come to make purchasing decisions. Buyers came to talk to us and run tests on our fabrics afterwards, and usually within 2-3 months’ time, we will receive orders. We also like the idea of the Beyond Denim hall as it ensures the effectiveness of gathering and getting in touch with our target buyers.”

Mr Štěpán Kučera, Managing Director, Preciosa Components, China (Accessories Vision)
“This has been Preciosa’s third consecutive appearance at the autumn edition of Intertextile Shanghai, where we continue to see an increase in attendance by our target customers, namely high-end fashion brands from both the Chinese and international markets. Among the 200-plus buyers we met on the first two days of the fair were domestic fashion brands, sourcing managers of overseas brands, garment producers, as well as OEMs & ODMs, and we are more than satisfied with the results. Compared to similar fairs in which we have participated, Intertextile has a stronger focus on sourcing and manufacturing. International brands tend to send their sourcing teams, while local manufacturers and vendors also source here.”

Ms Shanshan Lu, Client Manger, Beijing Ecocert Certification Centre Co Ltd, China (All About Sustainability)
“As Intertextile Shanghai is the largest fair of its kind, we can always find our target customers here which are manufacturers from the Greater China area and the Asia Pacific region. The All About Sustainability zone has enhanced the exhibiting effectiveness as it creates a strong theme that attracts the right visitors to our booth. I think the visitor flow is stronger than last year. On day 1 alone, we received enquiries from over 10 potential customers which included old and new accounts. Moreover, by sharing our certifications in the seminar, our brand got further promoted in the fair. All in all, we are very pleased with this year’s outcome and very likely will return again next year.”
Worldwide buyers impressed with the unparalleled range of sourcing options on offer
While the exhibitors highly valued the fair’s ability in attracting quality, genuine buyers from around the world, these buyers were pleased to find all categories of apparel fabrics and accessories products from the entire industry under one roof.

 

Buyer opinions
Mr Johnny Lau, Head of Material Management, Quiksilver Asia Sourcing Ltd, Hong Kong
“The strongest trait of Intertextile Shanghai is its scale and aptitude in gathering the entire industry in one place. I believe no matter which sector of the industry or market you belong to – suiting, casual wear or ladieswear; high-end or fast fashion – you are ensured to find the right suppliers here. The fair houses a full-spectrum of suppliers which ease the sourcing process for purchasing departments like us. To maintain brand competitiveness, it is getting more important for us nowadays to know about suppliers and manufacturers from around the world, so we were also impressed with the fair’s internationalism and had unexpected returns from this trip.”

Mr Luis Alfonso Yepes Londono, Manager, Yetex SAS, Columbia
“Among all trade shows, Intertextile Shanghai is the most influential one for my business, even compared to the European shows. Not only can I find local suppliers, but the fair literally puts brands from around the globe under one roof. This morning I discussed with three local companies that match my interest. Their fabrics were of good quality and competitive pricing, so I will soon make a decision and place orders.”

Ms Zhou Jie, General Manager, Shenzhen New Look Fashion Co Ltd, China
“Intertextile Shanghai is a comprehensive trade fair, and what’s unique about this fair is its unparalleled ability in gathering both domestic and premium international apparel fabrics and accessories suppliers. Therefore, the sourcing options in this fair cater to all market demands. I can say Intertextile is a fair that all fashion brands can’t miss as one can definitely find all kids of materials here. We sent over 10 colleagues from the sourcing and design departments to this year’s fair and sourced around 80% of the fabrics we need for the next season’s collection from about eight exhibitors.”

 

The next Intertextile Shanghai Apparel Fabrics is the Spring Edition, held from 14 – 16 March 2018.
Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

 

Lectra and Faurecia renew their partnership agreement ©lectra
Faurecia Cadillac
26.09.2017

Lectra and Faurecia renew their partnership agreement

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”

Source:

Lectra Headquarters / Press Department
 

Archroma powers ‘Design Seeds’ with accurate, achievable color ©Archroma
Archroma Logo
11.09.2017

Archroma powers ‘Design Seeds’ with accurate, achievable color

Archroma, a global leader in color and specialty chemicals, has partnered with the popular color inspiration site Design Seeds, on a series of seasonal stories featuring colors found in the Color Atlas by Archroma®. Design Seeds founder Jessica Colaluca and the site have more than 1,250,000 followers combined across social media platforms, and Design Seeds itself gets around 300,000 viewers every month.

“Archroma Color Management and Design Seeds is a match made in heaven,” said Colaluca. “I had declined partnering with brands or incorporating sponsored content on the site for over seven years until I met the incredible folks at Archroma. Beyond our obvious shared passion for color, we share a dedication to empowering designers. And as a designer, I fell in love with the Color Atlas. It is a brilliant system overflowing with modern color.”

Archroma, a global leader in color and specialty chemicals, has partnered with the popular color inspiration site Design Seeds, on a series of seasonal stories featuring colors found in the Color Atlas by Archroma®. Design Seeds founder Jessica Colaluca and the site have more than 1,250,000 followers combined across social media platforms, and Design Seeds itself gets around 300,000 viewers every month.

“Archroma Color Management and Design Seeds is a match made in heaven,” said Colaluca. “I had declined partnering with brands or incorporating sponsored content on the site for over seven years until I met the incredible folks at Archroma. Beyond our obvious shared passion for color, we share a dedication to empowering designers. And as a designer, I fell in love with the Color Atlas. It is a brilliant system overflowing with modern color.”

Through the site, Colaluca provides daily color stories, utilizing dynamic, thought-provoking images. In a new Design Seeds feature sponsored by Archroma she creates ‘seasonal atlas’ which offers storied vignettes of creative color and inspiration. Color Atlas by Archroma® codes are provided for all colors in the inspiration resource. The ‘seasonal atlas’ is catalogued on the Design Seeds site, distributed at trade shows and is available for download.

“It’s critical to designers working in today’s global fashion industry to select color that is achievable from the very start of a project,” says Chris Hipps, Global Director, Archroma Color Management. “Here at Archroma, our suite of color tools, from the Color Atlas to our online Color Search tool to our industry-renowned Engineered Color Standards, are all designed to help designers capture their inspiration, and ensure that their color choices remain consistent across global production processes.”

“We brainstormed on how to enhance what we can offer creatives through our partnership and that is when the concept of the ‘seasonal atlas’ was born. Through Archroma’s sponsorship, I am able to create the expanded inspiration resource on the site. And by featuring Color Atlas codes, folks are getting a gorgeous color match from concept to execution which I believe no other system can provide,” adds Colaluca.

When creating Design Seeds, Colaluca mixes each color swatch individually. She uses digital software much as she had gouache paint back in the early days of her career. For the seasonal atlas she then works with the Archroma team to translate her collection into selections from the 4,320 swatches in the six-volume Color Atlas. Fans of any color story can then refer to the Archroma color number which references swatches in the Color Atlas. Each color is readily available as an Engineered Color Standard and the digital reflectance data. All colors are also supported in Color Atlas Online (coloratlas.archroma.com) with dye formulas on multiple substrates, Hex, CMYK, sRGB values and a selection of surrounding similar Colors.

More information:
Color Atlas Archroma Fashion
Source:

Archroma

Green products to be centre stage at October’s Yarn Expo Autumn ©Messe Frankfurt
Logo Yarn Expo
08.09.2017

Green products to be centre stage at October’s Yarn Expo Autumn

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

Amongst a record number of exhibitors at this October’s Yarn Expo Autumn, the debut BCI Pavilion as well as the Sateri Pavilion and Birla Planet Pavilion that include eco-friendly products are certainly amongst the highlights this year. Better Cotton Initiative (BCI) is a global organisation with more than 1,000 members including spinners, weavers and garment manufacturers throughout the entire cotton sector. It aims to promote sustainable cotton production, benefiting workers, customers and the environment as a whole. They will form the BCI Pavilion in Yarn Expo for the first time, with five spinners showcasing their cotton yarn manufactured with eco-friendly cotton.

Sateri is a well-known brand in China which specialises in viscose rayon. This natural and high-quality fibre is made from trees grown on renewable plantations. They are the largest producer of viscose fibre in China with three mills and an annual capacity of 550,000 tons, and also have Oeko-Tex certification. This October, nine other domestic exhibitors will form the Sateri Pavilion to demonstrate their comfortable textiles and skin-friendly hygiene products made from viscose fibre.

With over 50 years of experience in manufacturing cellulosic fibres, Birla Group strives to provide greener, purer and safer products to its customers. The Group has operated in China for three years now, and values Yarn Expo’s effectiveness in helping them to promote their brand and attract a wide range of buyers. “We managed to get connected with a number of downstream buyers at the fair. We have introduced our company and products to them that there is great chance for future cooperation.” said Mr Peter Dong, Senior Manager of Aditya Birla Group.   Coming back this year, the Birla Planet Pavilion will feature three of their highlighted fibres – Birla Viscose, Birla Modal and Birla Spunshades at the fair.

Six special display zones cater to latest industry trends

The textile industry in China is undergoing a structural change with keen competition, so domestic suppliers have to develop innovative and quality products to satisfy the ever-changing markets. To match the specific needs of various buyers, Yarn Expo has established six distinct display zones gathering the leading domestic companies, namely Colourful Chemical Zone, Natural Cotton Yarn Zone, Fancy Yarn Zone, Quality Wool Zone, Green Linen Zone and e-Commerce Zone.

Not only are a number of chemical fibre products with innovative, eco-friendly and health & comfort properties on offer from exhibitors, but visitors can also gain insights into product trends in these areas from the 2017/18 China Fibre Trend Area and Innovative Textile Material Forum, both of which feature in the Colourful Chemical Zone. The Natural Cotton Yarn Zone is another highlight of the three-day show, where exhibitors will showcase their natural cotton yarn and a range of functional products. Around 50 suppliers will also showcase their latest collections in the expanded Fancy Yarn Zone.
In response to the strong demand for fibre and yarn products in China and the Asian region, the coming autumn edition of Yarn Expo will double its exhibition space, and will accommodate around 500 global yarn suppliers from 13 countries and regions. Together with Yarn Expo Autumn 2017, three other textile trade fairs are held concurrently from 11 – 13 October in the same venue: Intertextile Shanghai Apparel Fabrics – Autumn Edition, PH Value and the China International Fashion Fair (CHIC).

Yarn Expo Autumn is organised by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.

JEC Group Source: www.agenceapocope.com
JEC Group
30.05.2017

Innovations that will change the future of Building and Construction to be rewarded at JEC Innovation Awards in Chicago, June 20-22, 2017

Composites use in Building and Construction will be highlighted at JEC newest event dedicated to this specific Composites Industry next month in Chicago, IL, USA. The numerous and diverse benefits that these innovative materials bring to the Building Industry will help overcome the coming challenges such as, urbanization, increase of natural disasters (floods, storms, tsunamis, earthquakes…), along with the decrease of non-renewable raw materials and the high standard levels set by the society in terms of lightness and fluidity. Composites Materials bring answers and opportunities to tackle those issues in sustainable, durable and reliable manners. Solutions like ease of fabrication (Owens Corning), structures durability (Biteam), anti-seismic reinforcement (DowAksa), use of end-of-life products such as recycled bottles of water (Premier Composites Technologies), aerial forms (Optima Projects Ltd) or again energy saving (Armageddon Energy).

Composites use in Building and Construction will be highlighted at JEC newest event dedicated to this specific Composites Industry next month in Chicago, IL, USA. The numerous and diverse benefits that these innovative materials bring to the Building Industry will help overcome the coming challenges such as, urbanization, increase of natural disasters (floods, storms, tsunamis, earthquakes…), along with the decrease of non-renewable raw materials and the high standard levels set by the society in terms of lightness and fluidity. Composites Materials bring answers and opportunities to tackle those issues in sustainable, durable and reliable manners. Solutions like ease of fabrication (Owens Corning), structures durability (Biteam), anti-seismic reinforcement (DowAksa), use of end-of-life products such as recycled bottles of water (Premier Composites Technologies), aerial forms (Optima Projects Ltd) or again energy saving (Armageddon Energy).


Following its strategy to address every Composites End-user, the JEC Innovation Awards will reward these 6 Composites Innovators in Building & Construction that will change the way we build.
If the majority of submissions relied on glass fibers, which is common in the Construction field, we see an increased interest in carbon fibers, especially for structural applications. And similarly to all sectors of the composite industry, thermoplastics are gaining in importance in Construction. Therefore, to promote the growing use of composites as a construction material, 6 categories are awarded, covering a large panel of applications and possibilities.

Source:

AGENCE APOCOPE