From the Sector

• Hexcel HexPly® XF Selected for High-Quality, Paint-Ready Parts for Sunseeker 90 Ocean Luxury Yacht
• Hexcel’s innovative surface technology yields parts with paint-ready surfaces for builder of luxury yachts

Yacht builder Sunseeker has chosen Hexcel’s HexPly® XF surface technology to produce prepreg parts with high-quality, paint-ready surfaces quickly and efficiently for its 90 Ocean luxury yacht, one of its newest models.

The lightweight composite hardtop for the Sunseeker 90 Ocean yacht is manufactured from a combination of HexPly® XF and Hexcel's HexPly® SuperFIT® semi-preg. The hardtop is lighter in weight than versions made using resin-infusion processes, and it de-molds with a pinhole-free surface that needs minimal preparation to be ready for paint. Sunseeker has recorded an overall reduction in process time of around 30%, saving three days of manufacturing time per hardtop.

The hardtop provides shade and protection for the yacht’s uppermost deck space. Its reduced weight helps to ensure the stability of the vessel, and the paint-ready finish with HexPly XF provides Sunseeker with more options for customizing its color to the individual needs of its clients.
 
HexPly XF is a lightweight, non-woven semi-preg that eliminates the need to use a traditional in-mold gel coat. The innovative surface technology significantly reduces the costly and time-consuming refinishing work typically required to impart a paint-ready finish to prepreg or semi-preg parts, and yields lightweight, consistent components in short cycle times.

Working with Sunseeker, Hexcel developed a material format, a laminate ply sequence, and a production process that satisfied the structural requirements for the hardtop and enabled the yacht builder’s production team to lay up and cure the part in a single shot – slashing cycle times.

Hexcel supplies Sunseeker with a HexPly XF product that comprises both the surface layer and the first structural reinforcement ply, eliminating the need for a cosmetic barrier coat. Neither the HexPly XF surface layer nor the following layers of HexPly SuperFIT require time-consuming debulking steps – significantly reducing lay-up time – and both are based on Hexcel's rapid-curing M79 epoxy resin system. Adhesive resin films are not needed to bond the hardtop’s foam core, as the resin content of the SuperFIT plies has been adjusted to further reduce overall process time.

Once de-molded, the cured hardtops are inspected before they are passed to Sunseeker’s finishing and painting technicians for final preparation and painting. The HexPly XF resin surface allows the yacht builder’s quality technicians to inspect the laminate below quickly and easily, ensuring the quality and consistency of the structural reinforcement plies.

“Composite materials that improve our production processes, as well as great technical support, are what makes working with Hexcel such a success story," said Stuart Vaughan-Jones, Composite Development Manager, Sunseeker. "With the switch from gel coat and resin infusion to HexPly XF and SuperFIT in the new hardtops, we are now building lighter, more consistent parts, more quickly than before, with a higher quality surface finish. XF really has ticked all the boxes.”  

Garth Thomas, Account Manager – Marine, Hexcel, said: "With the HexPly XF surface technology now well established, XF will soon be used in other large moldings where minimizing weight is critical, as well as additional hardtops across the Sunseeker model range."

• High-Performance Solutions and Protection Effects

Huntsman Textile Effects, a global leader in innovative and sustainable textile dyes and protection effects, is bringing a complete suite of solutions for performance apparel, technical textiles and casual wear to Colombiatex de las Américas 2022 from January 25 to 27.

Sustainable solutions
Huntsman Textile Effects will showcase the latest addition to the third generation of its AVITERA® SE polyreactive dye range; it delivers brilliant bluish-red shades while reducing the water and energy required for production by up to 50% and increasing mill output by up to 25% or more. It also outperforms the best available dyeing technologies for cellulosic fibers and blends in terms of value by reducing recipe costs, minimizing processing costs and eliminating reprocessing.

ERIOPON® E3-SAVE is another next-generation water-saving innovation. An all-in-one textile auxiliary for polyester processing, it allows pre-scouring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products. This shortens processing time and saves water and energy.

rPET processing innovations
As leading brands begin to work towards a circular economy for textiles, mills are being asked to overcome challenges associated with transforming recycled polyester (rPET) into high-quality new textiles. Huntsman Textile Effects is presenting an end-to-end solution for achieving full whites and consistent shades on rPET with right-first-time quality. This eco-friendly rPET processing solution includes pre-treatment chemicals, fluorescent whitening agents, state-of-the-art washfast dyes, and finishing solutions for high-performance protection and comfort.

Washfast disperse dyes for polyester and man-made fibers
TERASIL® BLUE W is the latest addition to Huntsman’s TERASIL® W/WW range of washfast disperse dyes for polyester and man-made fibers and their blends. Crucially, it is not sensitive to reduction, leading to higher reproducibility, higher right first-time results and operational excellence. It also reduces overall water and energy consumption, as well as water effluent. TERASIL® BLUE W offers high build-up for deep blues that stay vibrant.

Next-generation odor control
In partnership with Sciessent, Huntsman Textile Effects presents antimicrobial and odor-control solutions to Colombiatex to enable mills to produce garments that smell fresh for longer and need less frequent washing. Featured is Sciessent’s new anti-odor technology - NOBO™. It is specifically designed to reduce odors in natural and synthetic fabrics; it can be incorporated into virtually any fabric. From base layer and activewear tops to socks and underwear to jeans and chinos. It offers a cost-effective way to upgrade everyday products and add value to your customers.

“Sustainability is becoming a priority for regulators in South America and around the world, and consumers are increasingly keen to make a difference by choosing green brands,” said Ben Powell, Commercial Director Americas, Huntsman Textile Effects. “Huntsman is redefining what’s possible to help textile and apparel companies make the shift to more environmentally sustainable operations while enhancing their competitiveness at the same time. Our innovations make it possible to benefit from efficiency gains and resource savings in the factory as you deliver products that stand out in the market.”

• Evopreg® range expanded with unidirectional fibre-reinforced thermoplastic tapes

Composites Evolution, a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials, has announced the launch of a new range of unidirectional thermoplastic tapes, to sit alongside its existing line-up of Evopreg® prepregs. The first product families being launched are Evopreg® PA polyamide tapes, and Evopreg® PP polypropylene tapes, with further product lines expected as new customer requirements emerge.

Thermoplastic tapes, also known as thermoplastic prepregs, can be used in a wide variety of markets and applications, including flexible pipes for oil & gas and water transportation, pressure vessels (for example; hydrogen storage tanks and compressed natural gas tanks), and for providing local reinforcement to pre-formed components.

Marketing Director, Ben Hargreaves, explains further: “Our state-of-the-art manufacturing line gives us the capability to produce tapes on an industrial scale, using a variety of combinations of fibre and polymer. This is complemented by a pilot-scale line that allows us to carry out development trials, or manufacture small quantities of tape if required.”

“Because they can be repeatedly re-formed (via the application of heat and pressure), Evopreg® thermoplastic tapes are also very well-suited to multi-stage processing, meaning they are an excellent choice for producing hybrid structures, inserts or over-moulded components. In addition, this ability to be repeatedly re-formed opens the door to much easier recycling than is currently possible with thermoset composites.”

Asia's largest fashion fair, CHIC SPRING SHANGHAI, will postpone the event planned for March to April 14-16, 2022. The latest worldwide pandemic developments due to the new virus variant Omicron prompted the CHIC organizers to take this step.

With this relocation, the organizers are also taking into account the interests of international exhibitors and visitors. In addition to various international joint stands, Germany will also be represented with a GERMAN PAVILION. The trade fair team is working on innovations at the trade fair with the highest priorities and will now focus the entire marketing on the new date.

CHIC SPRING is the showcase for the latest trend developments in fashion and offers trade visitors a concentrated overview. CHIC SPRING as a fashion and lifestyle fair shows the areas of womenswear, menswear, kidswear, denim, shoes and bags, accessories, designers and streetwear in clear segments at the National Convention & Exhibition Center in Shanghai.

CHIC is organized by Beijing Fashion Expo Co. Ltd. and China World Exhibitions, supported by the China National Garment Association, the China World Trade Center and the Sub-Council of the Textile Industry (CCPIT).

Electronics For Imaging, Inc. is announcing that it will be prioritizing technology investments to accelerate growth in its fast-growing industrial EFI™ Inkjet business to continue to be a leader in the industry of analog-to-digital transition, as well as in its market-leading Fiery® business. As part of this focused strategy, EFI has completed a sale of its eProductivity Software (“EPS”) packaging and print productivity software business to an affiliate of Symphony Technology Group (“STG”). EFI and EPS will continue to collaborate with their joint customers and partners to ensure mutual success.

This realignment allows EFI to accelerate investment into its Inkjet and Fiery business units to capitalize on the growth opportunities available in existing segments the company serves, as well as drive expansion into markets that are beginning the transformation toward digital.

Industrial Inkjet: Capturing Unprecedented Opportunity
The industrial inkjet space is ripe with opportunity in existing and adjacent vertical markets. EFI Inkjet will continue to drive in high-volume, shuttle and single-pass inkjet technology, which the company has currently implemented in award-winning, high-performance products for the Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Decor verticals. EFI will also leverage its industry-leading expertise in hardware, mechanical control software, high-speed electronics, services, cloud-connected devices, and ink innovations to deliver the next generation of versatile, high-volume, superior-quality printers and presses.
 
Following the realignment, EFI is making investments in R&D to strengthen its position in core markets while entering new categories – including the development of technologies to address new applications for the textile space and for packaging.

Fiery: Driving Digital Print Innovation and Growth
The Fiery business unit, under the continued leadership of Fiery Chief Operating Officer and General Manager Toby Weiss, remains as one of the world’s premier DFE providers, enabling the high performance required across many vertical markets including packaging, signage and commercial print with advanced Fiery solutions driving high-end printers and presses from many major equipment manufacturers.

Productivity Software: Investing for Growth under New Ownership
EPS’ new owner, STG, is a private equity firm that focuses on investing in software, data analytics, and software-enabled technology services companies, and will support EPS to deliver enhanced value to its packaging and print customers and accelerate global growth. STG completed this acquisition on December 30, 2021. The price and terms of the deal were not disclosed.
 
Moelis & Company LLC served as exclusive financial advisor, and Sidley Austin LLP acted as legal counsel, to EFI in the sale of EPS. Paul Hastings LLP acted as legal advisor to STG.
 
EFI’s upcoming Connect users conference will be a joint event for EFI and EPS customers. Leaders from both companies will highlight their technology enhancements and product roadmap strategies during the January 17-21 Las Vegas gathering.

EU-ALLIANCE aims to support SMEs internationalisation in the fields of technical textile, connectivity and advanced materials to address dual use markets in four targeted countries: The United States, Canada, Japan and Indonesia. The EU-ALLIANCE project is funded by the European Union's COSME programme. It brings together 6 key clusters representing nearly 900 companies: Techtera (France); Systematic (France); PO.IN.TEX - Textile innovation cluster (Italy); NTT - Next Technology Tecnotessile (Italy); NIDV - Industries for Defence and Security (Netherlands); SIIT - Intelligent System Integrated Technologies (Italy).

On November 25, the partners hosted a webinar to present the project and the opportunities it will generate. This webinar was also an opportunity to position the participants to benefit from the services generated by the project (market research, commercial missions, B2B meetings, etc.), communicate your needs and thus join the selection of companies that will be able to benefit from European support for these actions. Beyond this internationalisation objective, the project also aims to encourage intra-European collaboration and synergies between the various members of the partner clusters.

• More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

The goal is to create sustainable carbon cycles. This requires comprehensive carbon management of renewable sources, which includes carbon from biomass, carbon from Carbon Capture and Utilisation (CCU) – the industrial use of CO2 as an integral part – as well as mechanical and chemical recycling. And only the use of all alternative carbon streams enables a true decoupling of the chemical and materials sector from additional fossil carbon from the ground. Only in this way can the chemical industry stay the backbone of modern society and transform into a sustainable sector that enables the achievement of global climate goals. The Renewable Carbon Initiative’s (RCI) major aim is to support the smart transition from fossil to renewable carbon: utilising carbon from biomass, CO2 and recycling instead of additional fossil carbon from the ground. This is crucial because 72% of the human-made greenhouse gas emissions are directly linked to additional fossil carbon. The RCI supports all renewable carbon sources available, but the political support is fragmented and differs between carbon from biomass, recycling or carbon capture and utilisation (CCU). Especially CCU has so far not been a strategic objective in the Green Deal and Fit-for-55.

This will change fundamentally with the European Commission's communication paper on “Sustainable Carbon Cycles” published on 15 December. The position in the paper represents an essential step forward that shows embedded carbon has reached the political mainstream – supported by recent opinions from members of the European parliament and also, apparently, by the upcoming IPCC assessment report 6. Now, CCU becomes a recognised and credible solution for sustainable carbon cycles and a potentially sustainable option for the chemical and  material industries. Also, in the political discussions in Brussels, the term “defossilation” is appearing more and more often, complementing or replacing the term decarbonisation in those areas where carbon is indispensable. MEP Maria da Graça Carvahlo is among a number of politicians in Brussels who perceive CCU as an important future industry, putting it on the political map and creating momentum for CCU. This includes the integration of CCU into the new Carbon Removal Regime and the Emission Trading System (ETS).

As the new policy documents are fully in line with the strategy of the RCI, the more than 30 member companies of the initiative are highly supportive of this new development and are ready to support policy-maker with data and detailed suggestions for active support and the realisation of sustainable carbon cycles and a sound carbon management. The recent political papers of relevance are highlighted in the following.

Brussels: Communication paper on “Sustainable Carbon Cycles”
On 15 December, the European Commission has published the communication paper “Sustainable Carbon Cycles” . For the first time, the importance of carbon in different industrial sectors is clearly stated. One of the key statements in the paper is the full recognition of CCU for the first time as a solution for the circular economy, which includes CCU-based fuels as well. The communication paper distinguishes between bio-based CO2, fossil CO2 and CO2 from direct air capture when addressing carbon removal and it also announces detailed monitoring of the different CO2 streams. Not only CCU, but also carbon from the bioeconomy is registered as an important pillar for the future. Here, the term carbon farming has been newly introduced, which refers to improved land management practices that result in an increase of carbon sequestration in living biomass, dead organic matter or soils by enhancing carbon capture or reducing the release of carbon. Even though the list of nature-based carbon storage technologies is non-exhaustive in our view, we strongly support the paper’s idea to deem sustainable land and forest management as a basis for the bioeconomy more important than solely considering land use as a carbon sink. Surprisingly, chemical recycling, which is also an alternative carbon source that substitutes additional fossil carbon from the ground (i.e. carbon from crude oil, natural gas or from coal), is completely absent from the communication paper.

Berlin: Coalition paper of the new German Government: “Dare more progress – alliance for freedom, justice and sustainability”
The whole of Europe is waiting to see how the new German government of Social Democrats, Greens and Liberals will shape the German climate policy. The new reform agenda focuses in particular on solar and wind energy as well as especially hydrogen. Solar energy is to be expanded to 200 GW by 2030 and two percent of the country's land is to be designated for onshore wind energy. A hydrogen grid infrastructure is to be created for green hydrogen, which will form the backbone of the energy system of the future – and is also needed for e-fuels and sustainable chemical industry, a clear commitment to CCU. There is a further focus on the topic of circular economy and recycling. A higher recycling quota and a product-specific minimum quota for the use of recyclates and secondary raw materials should be established at European level. In the coalition paper, there is also a clear commitment to chemical recycling to be found. A significant change for the industry is planned to occur in regards to the so-called “plastic tax” of 80 cents per kilogram of non-recycled plastic packaging. This tax has been implemented by the EU, but most countries are not passing on this tax to the manufacturers and distributors, or only to a limited extent. The new German government now plans to fully transfer this tax over to the industry.

Düsseldorf: Carbon can protect the climate – Carbon Management Strategy North Rhine-Westphalia (NRW)
Lastly, the RCI highly welcomes North Rhine-Westphalia (NRW, Germany) as the first region worldwide to adopt a comprehensive carbon management strategy, a foundation for the transformation from using additional fossil carbon from the ground to the utilisation of renewable carbon from biomass, CO2 and recycling. For all three alternative carbon streams, separate detailed strategies are being developed to achieve the defossilisation of the industry. This is all the more remarkable as North Rhine-Westphalia is the federal state with the strongest industry in Germany, in particular the chemical industry. And it is here, of all places, that a first master plan for the conversion of industry from fossil carbon to biomass, CO2 and recycling is implemented. If successful, NRW could become a global leader in sustainable carbon
management and the region could become a blueprint for many industrial regions.

INDA, the Association of the Nonwoven Fabrics Industry, and Nonwovens Industry Magazine have extended the due date for nominations for the IDEA® Achievement Awards. IDEA® is the preeminent event for the nonwovens and engineered fabrics conference and exposition and will be held at the Miami Beach Convention Center in Miami Beach, Florida USA, March 28-31, 2022.

The IDEA® Achievement Awards recognize leading companies and new innovations (since IDEA® in 2019) in the global engineered fabrics industry in six categories. Companies can nominate their products, or their customers’ products in as many categories as applicable, which are:

• Sustainability Advancement (advances one or more elements of sustainability or circularity since 2019)
• Equipment (best new equipment introduction since 2019)
• Raw Materials (best new raw materials introduction since 2019)
• Short-Life (best new disposable product introduction since 2019)
• Long-Life (best new durable product introduction since 2019)
• Nonwoven Product (best new nonwoven product introduction since 2019)

The submission deadline is now extended to February 1, 2022.  Selections will be made by members of the industry voting through Nonwovens Industry Magazine. Selection of the Entrepreneur Award will be made by Nonwovens Industry Magazine.

US Vice President Kamala Harris announced significant multimillion-dollar investments by Parkdale Mills and six other companies today, as part of the Administration’s Call to Action to the private sector to promote economic opportunity in the region, as her office works to address the root causes of migration.

Vice President Harris, who is overseeing diplomatic efforts with El Salvador, Guatemala, Honduras, and Mexico, announced several private sector commitments to strengthen economic opportunities in the Northern Triangle and made remarks at a White House roundtable, which included Anderson Warlick, Chairman and CEO of Parkdale Mills. The textile and apparel co-production chain is one of the most essential supply chains for employment and economic development in both the United States and the Northern Triangle region, currently supporting over 1 million jobs in the United States and the Central American region. The Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and its strong rules of origin are the primary reasons this co-production chain exists, which is seeing significant growth this year.

North Carolina-headquartered Parkdale Mills, one of the largest manufacturers of spun yarn and cotton consumer products in the world, will make a multimillion-dollar investment in a new yarn spinning facility in Honduras and make an additional substantial investment to support existing operations in Hillsville, Virginia. This investment will help customers shift 1 million pounds of yarn per week away from supply chains in Asia and China and enhance U.S. and CAFTA-DR co-production resilience and increase regional product offerings. Parkdale’s announced investment will create hundreds of jobs in Honduras and further support hundreds of employees in Parkdale’s Hillsville operations.  

Recently, administration officials from the U.S. Trade Representative’s office and the Vice President’s office met with the U.S. textile industry to reaffirm the importance of rules of origin in nearshoring production chains, helping address labor and environmental challenges and mitigating supply chain risk.

“I would like to sincerely thank Vice President Harris for making this announcement and leading the effort with private industry to create more economic opportunities in northern Central America and the United States,” said Anderson Warlick, Chairman and CEO of Parkdale Mills. “Parkdale’s investments will support good paying jobs in the United States and in the Central American region and significantly increase our extensive product offering and capacity, including the production of sustainable specialty yarns.

Parkdale sees an enormous opportunity for brands and retailers to re-shore and nearshore production supply chains and double the size of U.S.-CAFTA-DR trade, because of the rules of origin in our trade agreement and a shift in sourcing by brands and retailers mitigating their supply chain sourcing risks.  We are excited about what this opportunity means for jobs in the U.S. and the region for this critical production chain and couldn’t be more thrilled to be part of this effort.  We look forward to working with the Vice President and her team on strengthening the textile and apparel production chains in the U.S. and region.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas, said, “This is an exciting and important announcement by Parkdale and Vice President Harris. Our industry has invested billions of dollars in the U.S. and in the region as a result of the investment-based rules of origin in the CAFTA-DR agreement, which ensures the job benefits of the agreement are reserved for the parties to the agreement.  Additional substantial announcements on further investment in textile and apparel production are expected soon.

As brands and retailers are seeking more environmentally sustainable, vertically integrated, transparent, and quick turnaround supply chains, our collective industries stand ready to work with companies that are seeking to mitigate sourcing strategies as Asian supply chains have faced enormous production constraints.  Further verticalization in the industry, like Parkdale’s announcement today, allows broader product diversification and grows jobs across the textile and apparel production chain.

We are thrilled with today’s announcement because it is a win-win for American and Central American workers and our environment and a huge opportunity to further recalibrate supply chains out of China and Asia. This valuable co-production chain between the U.S. and the CAFTA-DR region accounts for $12 billion in two-way trade and billions of dollars of investment. Significant growth is occurring in our sector and is expected to continue as supply chains continue to recalibrate.  We are delighted about this today’s announcement and appreciate the Administration’s strong support.”

Microplastic pollution is a global challenge across many industries and sectors – one of critical importance being textiles.

A 2021 study by the California Ocean Science Trust and a group of interdisciplinary scientists acknowledges that microfibres from textiles are among the most common microplastic materials found in the marine environment. Every time synthetic clothes are manufactured, worn, washed, or disposed of, they release microplastics into terrestrial and marine environments, including human food chains. Synthetic fibres represent over two-thirds (69%) of all materials used in textiles, a proportion that is expected to rise to 73% by 2030. The production of synthetic fibres has fuelled a 40-year trend of increased per capita clothing consumption.

Global textile consumption has become:

• more reliant on non-renewable resources,
• less biodegradable, and
• increasingly prone to releasing microplastics.

The increased consumption is also discretionary, driven by consumer desire and remains unchecked. Thus, the long-term trend in the textile industry parallels the intentional addition of microplastics to products such as cosmetics. The contrast is that the European Chemicals Agency (ECHA) has recommended such intentional additions be restricted, whereas the over-consumption of synthetic fibres continues unchecked. One way for the EU to account for and mitigate microplastic pollution is through an EU-backed methodology measuring and reporting microplastic emissions, so that consumers and procurement officers have the information needed to minimise microplastic pollution resulting from their purchasing decisions.

There is a critical opportunity to address microplastic pollution in the fashion textile industry through the EU Product Environmental Footprint (PEF) methodology. To meet the environmental objectives of the Circular Economy Action Plan, the EU is proposing that companies substantiate their products’ environmental credentials using this harmonised methodology. However, microplastic pollution is not accounted for in the PEF methodology. This omission has the effect of assigning a zero score to microplastic pollution and would undermine the efforts of the European Green Deal, which aim “to address the unintentional release of microplastics in the environment.”

The incorporation of microplastic pollution as an indicator would increase the legitimacy of the PEF method as well as better inform consumer purchasing decisions, especially as the European Green Deal seeks to “further develop and harmonise methods for measuring unintentionally released microplastics, especially from tyres and textiles, and delivering harmonised data on microplastics concentrations in seawater.”

Whilst we continue to learn about the damage of microplastics and there is new knowledge emerging on the toxic impacts along the food chain, there is sufficient information on the rate of microplastic leakage into the environment to implement a basic, inventory level indicator in the PEF now. This is consistent with the recommendations of a review of microplastic pollution originating from the life cycle of apparel and home textiles. There are precedents in PEF for basic level (e.g., ‘resource use, fossils’) and largely untested (e.g. land occupation and toxicity indicators) indicators, and therefore an opportunity for the EU to promote research and development in the measurement and modelling of microplastic pollution by including such emissions in the PEF methodology. For such an indicator, the long and complex supply chains of the apparel and footwear industry would be a test case with high-impact and a global reach.