From the Sector

Archroma has won awards in two categories at the Just Style 2024 Excellence Awards. It took home two coveted Innovation Excellence awards for its SUPER SYSTEMS+ solutions and AVICUERO® leather tanning process, as well as a Social Excellence award for its longstanding and holistic commitment to community engagement in Baroda, India.

The awards recognize how Archroma is driving change with innovations that advance sustainability and through initiatives that contribute to the socio-economic progress of communities near to its Baroda manufacturing plant.

Innovation Awards
Archroma was recognized for advancing sustainable manufacturing in two Just Style Excellence Awards for Innovation.

SUPER SYSTEMS+ is a comprehensive suite of solutions that addresses the textile industry's key challenges, including water consumption, greenhouse gas emissions, circularity, chemical management and compliance.

By providing end-to-end, fiber-specific solutions that enhance process efficiency and offer intelligent effects, SUPER SYSTEMS+ enables mills and brands to meet their sustainability targets as well as consumer demand for durable products with enhanced functionality and sustainability. With end-to-end solutions from pre-treatment to finishing, SUPER SYSTEMS+ can be deployed without additional investment. With future compliance in mind, the solutions also go beyond current regulations and industry standards to anticipate upcoming restrictions.

Archroma’s AVICUERO® is a system for sustainable leather tanning and dyeing. Developed in collaboration with UK-based leather technology expert Dr Leather, it is both chrome- and metal-free and yet maintains the quality and performance of traditional tanning methods. Tanners enjoy shorter processing times, eliminate the pickling process and reduce salt usage, leading to lower pollution effluent discharge loads. In addition, AVICUERO® can offer energy savings of up to 25% and CO₂ emissions reductions of up to 23% compared to traditional chrome tanning.

Social Award for Community Engagement
Archroma has also been recognized for the positive impact it is having on communities in the vicinity of Baroda through multifaceted initiatives that span early childhood development, student scholarships, agricultural education and the empowerment of women.

Archroma recently set up an Anganwadi Centre to provide a range of services in the community, including nutrition and health education and pre-school learning. It also runs a scholarship program for students in vocational training, helping to create a skilled talent pool for the region. Archroma is also collaborating with a local NGO to empower farmers with modern agricultural methods and insights.

The building of a Household Biogas Plant in Umraya village is another example of Archroma's sustainable initiatives. The conversion of manure into clean renewable energy by the plant tackles several issues, such as reducing greenhouse gas emissions and enhancing soil health. It also liberates rural women from the burden of sourcing conventional fuel sources and the health risks associated with burning dung cakes for fuel.

KARL MAYER Technische Textilien launches the new MAX GLASS ECO, a composite machine with a focus on standard non-crimp fabrics made of glass fibers.

The MAX GLASS ECO incorporates proven solutions from the KARL MAYER GROUP's range of multiaxial machines, including features from its predecessor, the MAXTRONIC®, and combines these with sophisticated new technical developments. The result is a production machine for the economical manufacture of standard glass fiber articles, especially non-crimp fabrics for the wind power industry.

The multiaxial warp knitting machine is extremely efficient, affordable and, unlike the previous MAXTRONIC®, sufficiently flexible thanks to various optional functions. At a rotational speed of up to 1,800 min^-1, a maximum output of 410 m/h is achieved.

The MAX GLASS ECO is available with a working width of 101″ and is suitable for laying angles of +/-45°. A complementary layering system ensures a uniform take-up speed and therefore gentle processing of the fiber material. This sophisticated weft tension compensation device is one of a whole series of tried and tested features of KARL MAYER multiaxial technology that have been integrated into the new machine. Other adopted solutions include the Fiber Chopping Unit, which allows glass fiber chips to be introduced into the laying process and thus cover more fields of application, and a single pin transport chain for a processing method with less waste.

Newly developed innovations also ensure even better performance, including the fixed layer system, which ensures high placement precision at all laying angles. Other equipment details with added value for the customer include a conveyor belt across the full working width, the walking needle system, which prevents the formation of lanes even with long stitch lengths, and the fitting of single compound needles, which can be changed efficiently.

Cascale (formerly the Sustainable Apparel Coalition) will host Manufacturer Forum: Shanghai on June 28, part of an annual series of events designed to amplify the voices of manufacturers around the globe. Featuring targeted programming designed to address local challenges faced by manufacturers, the event will highlight solutions provided by Cascale’s Higg Index suite of tools and growing list of impact initiatives. The event takes place at the Shanghai New International Expo Center in collaboration with ISPO Shanghai, the multi-segment summer trade show.

Following successful runs in Bangalore, Dhaka, and Shenzhen, Manufacturer Forum: Shanghai will further facilitate pre-competitive collaboration in order to share best practices and collectively address critical challenges. Keynote speakers include Colin Browne, the organization’s newly-appointed CEO, and Scott Raskin, CEO of Worldly, Cascale’s technology partner and event sponsor.

Reflecting “Catalyst for Change,” the current theme of Cascale’s Manufacturer Forum series, the Shanghai event reinforces the organization’s commitment to support an open exchange between manufacturers and better understand their needs and ongoing challenges to jointly develop solutions.

Over 200 attendees are expected to attend the event, which brings together manufacturers with business leaders and critical stakeholders. Programming will cover a wide range of topics, including what manufacturers need to know about global policy, how strategic partnerships can drive industry change, the evolution of Higg FEM and verification processes, and the latest on decarbonization impacts. To aid goal and target-setting, there will also be dedicated training on setting Science-Based Targets for decarbonization, as part of an evolving and interactive program.

Stratasys Ltd., a company in polymer 3D printing solutions, announced their financial results for the first quarter 2024.

First Quarter 2024 Financial Results Compared to First Quarter 2023:

• Revenue of $144.1 million compared to $149.4 million.
• GAAP gross margin of 44.4%, compared to 43.8%.
• Non-GAAP gross margin of 48.6%, compared to 47.3%.
• GAAP operating loss of $24.5 million, compared to an operating loss of $16.8 million.
• Non-GAAP operating loss of $1.2 million, compared to non-GAAP operating income of $1.5 million.
• GAAP net loss of $26.0 million, or $0.37 per diluted share, compared to a net loss of $22.2 million, or $0.33 per diluted share.
• Non-GAAP net loss of $1.7 million, or $0.02 per diluted share, compared to non-GAAP net income of $1.1 million, or $0.02 per diluted share.
• Adjusted EBITDA of $4.1 million, compared to $7.0 million.
• Cash generated by operating activities of $7.3 million, compared to cash used by operating activities of $17.9 million in the year-ago quarter.

2024 Financial Outlook:
Based on current market conditions and assuming that the impacts of global inflationary pressures, relatively high interest rates and supply chain costs do not impede economic activity further, the Company is reiterating its outlook for 2024 as follows:

• Full-year revenue of $630 million to $645 million.
• Compare to 2023 revenue of approximately $616 million excluding divestments and annualizing Covestro.
• Full-year non-GAAP gross margins of 49.0% to 49.5%, improving sequentially throughout the year.
• Full-year operating expenses in the range of $292 million to $297 million.
• Full-year non-GAAP operating margins in a range of 2.5% to 3.5%.
• GAAP net loss of $88 million to $72 million, or ($1.24) to ($1.01) per diluted share.
• Includes one-time extraordinary costs associated with Stratasys’ strategic alternatives process.
• Non-GAAP net income of $9 million to $14 million, or $0.12 to $0.19 per diluted share.
• Adjusted EBITDA of $40 million to $45 million.
• Capital expenditures of $20 million to $25 million.
• Positive cash flow from operating activities.

Non-GAAP earnings guidance excludes $29 million to $31 million of share-based compensation expense, $26 million to $28 million of projected amortization of intangible assets, and reorganization and other expenses of $29 million to $35 million. Non-GAAP guidance includes tax adjustments of $2 million to $3 million on the above non-GAAP items.

Breaking new ground in plastics recycling means assessing the value chain from end to end. The big opportunities for the future are in fine-tuning the individual process steps; from the collection of recyclable materials to the recycling process and the end product. This is where the cooperation of Lindner and the EREMA Group comes in, officially launched following the 50/50 founding of the holding BLUEONE Solutions in August 2023 to which shares of Lindner Washtech were contributed. The expertise of EREMA, a manufacturer of extruders and filtration solutions for plastics recycling and the largest company within the EREMA Group, has now been combined with the expert know-how from Lindner Washtech, a leading provider of all-in-one solutions for shredding, sorting and washing plastic feed materials.

Data transfer ensures more efficient recycling processes
Process control is an especially important aspect of plastics recycling, which is why standardising the process control system was what the two companies focused on first. "Together, we have developed a platform that allows data to be exchanged between the extruder and the washing system," says Manfred Hackl, CEO of the EREMA Group at IFAT in Munich. "This enables us to analyse the data more precisely so that effective improvement measures can be deduced." All key parameters are taken into account and monitored via a digital interface. For example, it is possible to use information relating to the current throughput of the EREMA Pre Conditioning Unit to optimise the washing process as soon as possible so that it can compensate for fluctuations in capacity and achieve a significant increase in output. This data transfer represents a new step on the roadmap to digitalization.

High efficiency due to smart energy management
"To ensure sustainable recycling, it is necessary to find the right process for each application and to make sure that the individual process steps are perfectly coordinated," emphasizes Michael Lackner, Managing Director of Lindner. Coordinating the process steps has already achieved initial success in energy management, and a clear example of this is heat recovery. "We use the latent heat generated during the extrusion process as an energy source for the washing and drying process," explains Lackner. "This enables our customers to sustainably reduce their energy costs and carbon emissions".

Making the most of synergies along the value chain
Synergies need to be used to establish the quality standards specified for each end application. "The key question is how we can improve the end product and increase the overall efficiency of the recycling process at the same time," agree Manfred Hackl and Michael Lackner. This will only work if companies work together along the value chain. The industry leaders can already point to several examples where together they have improved recycling processes and made it possible to move away from downcycling. "An example of this is the recycling loop of HDPE starting material, which is processed into high-quality, food-safe rHDPE pellets using our two technologies," says Lackner. Lindner Washtech and EREMA continue to work intensively together to develop strategies for upcycling plastics and increase recycling rates.

• Revenue up 5.7 percent year-on-year to EUR 658.4 million
• EBITDA more than doubles year-on-year to EUR 71.4 million
• Free cash flow of EUR 87.3 million (compared with minus EUR 132.3 million in the first quarter of 2023) and thereby positive for the third consecutive quarter
• Performance program shows positive effect on revenue, EDITDA, and free cash flow
• Lenzing confirms EBITDA guidance for 2024

The Lenzing Group, a leading supplier of regenerated cellulose for the textile and nonwovens industries, recorded a further improvement in fiber sales volumes in the first quarter of 2024. An expected recovery in markets relevant for Lenzing has to date failed to materialize. Fiber prices remained at a low level. Although the costs of raw materials and energy continued to decrease, they remained higher than in the pre-crisis 2019 year.

Outlook
Even though the IMF has upgraded its growth forecast for 2024 from 3.1 percent to 3.2 percent, a number of risks remain for the global economy: potential geopolitical shocks, persistently higher inflation and key interest rates, as well as market risks emanating from the Chinese real estate market are currently considered to be the most relevant.

General inflation and falling incomes in real terms are continuing to exert a negative impact on consumer sentiment. A recovery in the consumer clothing market, which is important for Lenzing, will also depend on a further normalization of stock levels.

The currency environment is expected to remain volatile in regions relevant to Lenzing.

In the trend-setting market for cotton, a stable price trend is expected for the 2023/2024 harvest season.

Earnings visibility remains limited overall.

Revenue and earnings in the first quarter exceeded Lenzing’s expectations, despite the persistently difficult market. Lenzing is ahead of schedule with the implementation of its performance program. By appointing a separate Managing Board member, the projects identified to date are to be implemented even more rapidly, and new potentials are to be leveraged. Lenzing expects that these measures will increasingly contribute to further earnings improvement over the coming quarters compared to the first quarter of 2024.

Taking the aforementioned factors into consideration, the Lenzing Group confirms its guidance for the 2024 financial year of year-on-year higher EBITDA.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the transformation from a linear to a circular economy model.

Graniteville Specialty Fabrics has set new standards by challenging the traditional pad finishing process. With Baldwin Technology’s spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.
 
Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets. The installation of Baldwin’s TexCoat™ G4 is part of a facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

With sustainability benefits, tracking and process control, and Industry 4.0 integration, the TexCoat™ G4 provides high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. This system utilizes non-contact precision-spray technology, ensuring precise finishing coverage with the exact amount of chemistry. Changeovers (pad bath emptying, cleaning and refilling) are reduced, resulting in substantial chemical conservation and increased productivity.

The John Lewis Partnership announces the appointment of Jason Tarry as its seventh Chairman following Sharon White’s decision to step down at the end of her term.

Jason brings over 33 years of experience at Tesco where he was most recently the UK & Ireland CEO, a role he held for six years. His experience spans grocery, general merchandise and fashion in senior commercial, operational and general management positions, having joined the Tesco graduate programme in 1990.

In addition to delivering market leading grocery performance in the UK, he led the expansion of F&F Clothing across Europe as Group CEO. Jason is expected to take up the role in September, at which point Sharon will step down and support the transition as required.

Rita Clifton, Deputy Chairman and Chair of the Nomination Committee, said: “The Board extends its huge thanks to Sharon for successfully leading the Partnership through one of the most testing periods in its history - first Covid and then the cost of living crisis. She has faced into the toughest decisions and overseen the Partnership's financial recovery; we are in good financial health with a return to profit, and have a strong balance sheet with record investment planned this year. Sharon has also helped ensure that employee ownership of the Partnership is secure, is demonstrably focused on its purpose as a force for good and with an open and inclusive culture.

“As the Partnership moves into the next phase of its modernisation focused on our core retail business as well future growth, we are confident that Jason will provide the kind of inspirational leadership, a proven track record in multi-channel, multi-category retail success and a strong identification with Partnership values that we are seeking in this role. Jason has impressed everyone throughout the interview process with his warmth, his belief in the Partnership’s ideals and democratic principles and his appreciation for our unique and special brands.”

First launched in 2014, 2024 marks 10 years since Spezial's inception. Ringing in this landmark anniversary, Gary Aspden and the three stripes chart a course through the label’s past, present, and future – their latest collection telling the timeless story of adidas’ design DNA.

Headlining the collection is the Todmorden Smock. First released in Spring Summer 2021 to an immediate sell out, this season the coveted style returns in two colourways: navy and white. A commemorative 10th anniversary Mod Trefoil tee then brings the Spezial spirit to life as a certified collectors item.  
 
Two lightweight jackets – the Trentham and the Wingrove – constitute spring layering items, while the matching Angelzarke track top and track pants are awash with signature Spezial details. The apparel offering is then rounded out by the Rossendale Short, a Polo shirt, and the Lytham tee.
 
The accessories offering comprises of the Brinscall bag, a Mod Trefoil cap, a two pack of socks, and a Mod Trefoil towel.  

This drop is brought to life by a campaign film featuring actor and musician Ashley Walters.

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The covering of a small area with the new material made from LENZING™ fibers was tested for the first time during a field test on the Stubai Glacier. Four meters of ice were saved from melting. This was confirmed in a study conducted by the University of Innsbruck and the Austrian glacier lift operators on the Stubai Glacier in Tyrol (Austria). In 2023, the pilot project was successfully extended to all Austrian glaciers used by tourists.

Last year, the project was also awarded first place in the prestigious Swiss BIO TOP Awards for wood and material innovations.

Lenzing takes this innovation project as an opportunity to inspire collaborative action towards sustainable practices and circularity in the textile value chain. Together with a network of innovative partners, Lenzing is working on processing geotextiles into new textile fibers giving them a second life as a garment. The use of geotextiles is usually limited to two years, after which the nonwovens would be disposed of. In the first phase of the pilot project, the recycling of nonwovens made for geotextiles use has been successfully tested and a fashionable “Glacier Jacket” has been produced, showcasing that the recycling of geotextiles is viable. Next to Lenzing, the network includes Marchi & Fildi Spa, a specialist in the field of mechanical recycling, the denim fabric manufacturer Candiani Denim and the fashion studio Blue of a Kind.