From the Sector

Reset
4 results
Photo VDMA
12.12.2022

Young Talent Award for AI supported production control of carbon fibres

  • Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

  • Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

Carbon fibres are sought after because of their good properties. They are very light - they weigh up to 50 percent less than aluminium. The combination of low weight and good mechanical properties offers many advantages. Especially in times of the energy transition, lightweight materials like carbon are more relevant than ever before. At the same time, carbon fibres are as resistant to external stresses as metals. However, achieving these good properties of carbon fibres is very complex.


Up to 300 individual fibre strands - bundles of individual fibres - have to be monitored simultaneously during production. If carbon fibres tear, it costs time and money to sort out the damaged fibres. This is just one example of various defects that can occur in the fibres during production.


Therefore, Deniz Sinan Yesilyurt attached a camera to the carbon fibre line that takes pictures of various fibre defects during production and collects them in a database. The artificial intelligence in the camera's information technology system evaluates the fibre defects by assigning the images to predefined reference defects. In doing so, it recognises various fibre defects with a classification accuracy of 99 per cent. The process can also be used in other areas that produce chemical fibres.

Deniz Sinan Yesilyurt received the prize from the German Engineering Federation (VDMA) in Frankfurt am Main, Germany. He is a Bachelor's graduate at the Institut für Textiltechnik (ITA) of RWTH Aachen University. The full title of his bachelor's thesis is: "Development of a Kl-supported process monitoring using machine learning to detect fibre damage in the stabilisation process". The VDMA awarded the prize to a total of four theses from different universities. The prize is awarded for outstanding theses and was offered in Germany, Austria and Switzerland.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen Universit

Digital Pioneer Awards ceremony at the digitalCHURCH (c) digitalHUB Aachen e.V.; photo: Thomas Langens
Digital Pioneer Awards ceremony at the digitalCHURCH
15.06.2021

ITA Academy GmbH wins Digital Pioneer Award 2021

  • Digital Pioneer Awards ceremony at the digitalCHURCH
  • ITA Academy GmbH was honoured to receive the Digital Pioneer Award at the Digital Summit Event in Aachen on June 09, 2021.

The Digital Pioneer Award is given to companies that drive digitalisation with digital business models, processes or digital products. ITA Academy GmbH was honoured with the Digital Capability Center (DCC) Aachen and its support of companies in their digital transformation.

  • Digital Pioneer Awards ceremony at the digitalCHURCH
  • ITA Academy GmbH was honoured to receive the Digital Pioneer Award at the Digital Summit Event in Aachen on June 09, 2021.

The Digital Pioneer Award is given to companies that drive digitalisation with digital business models, processes or digital products. ITA Academy GmbH was honoured with the Digital Capability Center (DCC) Aachen and its support of companies in their digital transformation.

Using the latest didactic methods, sophisticated solution concepts and state-of-the-art technologies, the DCC Aachen supports people in keeping up with the digital future and becoming pioneers in digital transformation. In order to make innovative solutions such as AI and digital assistance systems tangible, the ITA Academy founded the Digital Capability Center (DCC) Aachen together with McKinsey & Company in 2017. The DCC is a model factory 4.0 in which digital applications are demonstrated and taught using the example of a realistic factory. The DCC thus offers a learning environment for companies in which participants are supported in building up competencies in the field of digital transformation in the form of practical work-shops.

The digital pioneers are to be publicised as best-practice examples in order to sensitize regional SMEs to the topic of digitisation. Around the award of the digital pioneers, the digitalHUB Aachen e.V. rolls out effective marketing activities. The pioneers achieve high visibility through the various planned campaigns and advertising opportunities.

Wilhelm-Lorch-Stiftung awards ITA graduate and a project at ITA with sponsorship prizes (c) Wilhelm-Lorch-Stiftung
Wilhelm-Lorch-Stiftung sponsorship award winner picture 2020 (Ricarda Wissel: row 1, first from right, Simon Kammler, row 4, first from right)
25.06.2020

Wilhelm-Lorch-Stiftung awards ITA graduate and a project at ITA with sponsorship prizes

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

ITA scientist Dr.-Ing. Pavan Manvi has developed a melt spinning process at ITA for the production of elastic yarn from thermoplastic polyurethane, in which carbon dioxide is used as one of the raw materials. In her bachelor thesis, Ricarda Wissel successfully developed a process chain for the CO2-based yarn in a textile end product for the first time. In cooperation with the company FALKE and Dr Manvi, who supervised Ms. Wissel's work, the yarn was used to produce a sock (see figure "FALKE sock with carbon dioxide filaments").

By reusing carbon dioxide from industrial waste as a raw material for textile and clothing products, the carbon dioxide balance can be improved and thus contributes directly to climate protection. The sponsorship prize of the Wilhelm-Lorch-Stiftung is endowed with 6,000 € for the specialist further training of Ms. Wissel.

Interdisciplinary training with development of a new type of measuring stand for the future-oriented research field "Smart Textiles

The development of textiles with additional digital functions, so-called "Smart Textiles", is considered a future-oriented field of research. In his project submission, ITA´s doctoral candidate Simon Kammler presented a concept for a lecture series on Smart Textiles at ITA and develops a new type of measuring stand for measuring the capacity and conductivity of fibres. The project is funded by the Wilhelm-Lorch-Stiftung with a prize money of 10,000 Euro.

Smart Textiles enable the textile to interact with the environment and the human user. Today they are therefore in demand in many areas of everyday life such as sport, health, living, life and mobility and offer completely new practical solutions. In combination with digital networked services, Smart Textiles promise support and innovation in almost all situations of daily life.

With the conception of a new lecture series, Mr. Simon Kammler is supporting ITA in its goal of providing the best possible training for young scientists. The focus is on imparting far-reaching interdisciplinary skills in order to master the challenges of current fields of research.

Background:

The Wilhelm-Lorch-Stiftung supports particularly talented young people from all areas of the textile industry. Its purpose is the promotion of subject-specific education and further education as well as the promotion of projects at universities, academic schools and vocational schools, which are characterised by the sustainable communication of innovative learning content in science and research. In total, thirteen sponsorship prizes were awarded in 2020. Due to the Corona crisis, the forum of TextilWirtschaft, which is normally the venue for the awards ceremony, unfortunately had to be cancelled in 2020.

Oerlikon presents take up winder Source: www.ita.rwth-aachen.de
Oerlikon presents take up winder
30.05.2017

Oerlikon presents new take-up winder to ITA as partial gift

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.


Due to this modernisation, ITA has access to a latest generation take-up winder which is used for various research projects. The new winder is applied at ITA’s two pilot melt spinning plants and ensures the transfer of new research and development insights into the pilot scale. Furthermore, this winder has two winding positions and operates with winding speeds between 2500 m/min and 5500 m/min. The new winder is suitable for all kinds of polymers, from polypropylene to polyethylene, polyester, polyamide etc. as well as for the production of several types of yarn, such as industrial yarn, pre-oriented yarn and fully-drawn yarn.
“We thank Oerlikon Barmag for the generous partial gifting and the support during the set-up of the new take-up winder”, says Prof. Dr Thomas Gries. “The new equipment will keep the institute’s machine park on a high and powerful level.” The head of ITA’s chemical fibre department Dr Thorsten Anders adds: “This winder is designed for the needs of chemical yarn research. It allows state of the art technology research and development and pilot-scale production. We will use it for the melt spinning plants in the single- and bi-component spinning process. This way, we can access a wide variety of producible yarn types.“

More information:
Oerlikon, ITA
Source:

Institut für Textiltechnik of RWTH Aachen University