Search

Browse all sections

From the Sector

591 results

(c) Digital Capability Center

15.03.2023

ITA Supports SMEs in Digitisation and Sustainability

The Institut für Textiltechnik (ITA) of RWTH Aachen University, as part of the Mittelstandzentrum 4.0 Kompetenzzentrum Textil vernetzt, has supported numerous small and medium-sized enterprises (SMEs) on their way to digitalisation over the last five years. At the Digital Capability Center (DCC) in Aachen, for example, SMEs were able to experience digitised production from yarn to smart bracelets and thus test the feasibility of Industry 4.0 solutions in their working environment.

New supply chain laws and social sustainability now pose current challenges for SMEs. In the follow-up project Mittelstand-Digital Zentrum Smarte Kreisläufe (SME Digital Centre Smart Cycles), ITA will be supporting SMEs from 1 March in implementing ideas for digitalisation and sustainability in concrete terms.

The Institut für Textiltechnik (ITA) of RWTH Aachen University, as part of the Mittelstandzentrum 4.0 Kompetenzzentrum Textil vernetzt, has supported numerous small and medium-sized enterprises (SMEs) on their way to digitalisation over the last five years. At the Digital Capability Center (DCC) in Aachen, for example, SMEs were able to experience digitised production from yarn to smart bracelets and thus test the feasibility of Industry 4.0 solutions in their working environment.

New supply chain laws and social sustainability now pose current challenges for SMEs. In the follow-up project Mittelstand-Digital Zentrum Smarte Kreisläufe (SME Digital Centre Smart Cycles), ITA will be supporting SMEs from 1 March in implementing ideas for digitalisation and sustainability in concrete terms.

This means finding sustainable solutions and processes for the circular economy together with companies and developing new digital business models. The ITA's solutions cover the areas of awareness-raising, qualification, implementation and networking. These offers are free of charge for SMEs - follow-up projects often lead to the funding programme "Central Innovation Programme for SMEs - ZIM" of the Federal Ministry of Economics and Climate Protection (BMWK) or to research and development projects.

Questions concerning the funding conditions can be sent to the following e-mail address: rosario.othen@ita.rwth-aachen.de.

More information:
Institut für Textiltechnik der RWTH Aachen University SMEs digitization circular economy

Source:

Institut für Textiltechnik der RWTH Aachen University

13.03.2023

ITMF-Webinar series on “Digital Workflow" and the “Circular Textile Economy"

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.

Please check the Textination schedule for all details.

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.

Please check the Textination schedule for all details.

More information:
ITMF digital workflow circular economy Webinar RWTH Aachen, ITA, Textiltechnik

Source:

Institut für Textiltechnik (ITA) of RWTH Aachen University

(c) NewStore GmbH

10.03.2023

NewStore: Erste Ausgabe des Omnichannel Leadership Reports

NewStore, eine mobile Omnichannel-Cloud-Plattform für internationale Einzelhandelsmarken, hat die erste globale Ausgabe seines Omnichannel Leadership Report veröffentlicht. Dabei wurden die Omnichannel-Fähigkeiten von 275 Einzelhandelsmarken in sechs Märkten untersucht: Australien, Frankreich, Deutschland, Italien, Spanien und Großbritannien. Das Unternehmen bezog dabei zusätzlich Daten aus seinem im Oktober 2022 veröffentlichten Nordamerika-Report 2023 ein, um den Fortschritt von Händler-Initiativen zur digitalen Transformation in den verschiedenen Regionen zu vergleichen.

NewStore setzte für die Untersuchung ein Team von Testkäufern ein, um die Einkaufserlebnisse der einzelnen Einzelhandelsmarken im Internet, in der mobilen App und in den Geschäften zu überprüfen. Die Ergebnisse führten zur Ermittlung einer Gesamtpunktzahl sowie der Punktzahl für jede Berichtskategorie. Durch diesen Prozess wurden die folgenden Marken als Omnichannel-Leader 2023 in Europa und Australien identifiziert:

NewStore, eine mobile Omnichannel-Cloud-Plattform für internationale Einzelhandelsmarken, hat die erste globale Ausgabe seines Omnichannel Leadership Report veröffentlicht. Dabei wurden die Omnichannel-Fähigkeiten von 275 Einzelhandelsmarken in sechs Märkten untersucht: Australien, Frankreich, Deutschland, Italien, Spanien und Großbritannien. Das Unternehmen bezog dabei zusätzlich Daten aus seinem im Oktober 2022 veröffentlichten Nordamerika-Report 2023 ein, um den Fortschritt von Händler-Initiativen zur digitalen Transformation in den verschiedenen Regionen zu vergleichen.

NewStore setzte für die Untersuchung ein Team von Testkäufern ein, um die Einkaufserlebnisse der einzelnen Einzelhandelsmarken im Internet, in der mobilen App und in den Geschäften zu überprüfen. Die Ergebnisse führten zur Ermittlung einer Gesamtpunktzahl sowie der Punktzahl für jede Berichtskategorie. Durch diesen Prozess wurden die folgenden Marken als Omnichannel-Leader 2023 in Europa und Australien identifiziert:

Marks & Spencer (U.K.)
Calzedonia (Italien)
Moncler (Italien)
Gucci (Italien)
Cotton On (Australien)

Im neuen Report wurde auch der allgemeine Omnichannel-Reifegrad regional bewertet. Den einzelnen Ländern wurde eine prozentuale Punktzahl zugewiesen, die die durchschnittliche Leistung der Marken auf dem jeweiligen Markt widerspiegelt:

Italien: 40%
USA- 36%
Australien: 34%
Spanien: 34%
Kanada: 32%
Frankreich: 30%
U.K.: 30%
Deutschland: 26%

Während Italien mit der höchsten Gesamtpunktzahl und drei der fünf als Omnichannel-Leader identifizierten Marken eindeutig führend war, lagen Europa (32 %) und Australien (34 %) bei der Omnichannel-Kompetenz insgesamt noch hinter Nordamerika (36 %).

NewStore ermittelt die Omnichannel-Kompetenz, indem der Einsatz spezifischer Fähigkeiten analysiert wird, die für die Customer Journey über die Online-, Mobile- und In-Store-Erfahrungen einer Marke wesentlich sind. Die folgenden Daten zeigen einige der wichtigsten Omnichannel-Funktionen, die NewStore untersucht hat und wie sich diese in den verschiedenen Regionen unterscheiden:

Kontaktloses Bezahlen: 96 % der globalen Marken bieten kontaktlose Zahlungen an, verglichen mit 76 % in Nordamerika.
BORIS: 62 % der globalen Marken ermöglichen es den Kunden, online gekaufte Artikel im Geschäft zurückzugeben, verglichen mit 72 % in Nordamerika.
Click-and-Collect: 59 % der globalen Marken ermöglichen es den Kunden, online gekaufte Produkte im Geschäft abzuholen, verglichen mit 54 % in Nordamerika.
Mobilität der Mitarbeiter: 31% der globalen Marken statten ihre Mitarbeiter mit einem mobilen Gerät aus, verglichen mit 32% in Nordamerika.
Mobile Shopping Apps: 23% der globalen Marken bieten eine eigene App an, verglichen mit 33% in Nordamerika.

More information:
NewStore Omnichannel Einzelhandel Stationärer Einzelhandel digital

Source:

NewStore GmbH

(c) Shima Seiki

02.03.2023

SHIMA SEIKI at FIMEC 2023

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA., will participate in the FIMEC 2023 46th International Fair of Leather, Chemicals, Components, Machinery and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil next month.

Working off the recent trend in knitted shoe uppers in the athletic footwear market, SHIMA SEIKI proposes knitted fabrics to the general footwear market as an alternative to leather. To that end SHIMA SEIKI will be showcasing the latest applications of computerized flat knitting technology to demonstrate its contributions in this field.

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA., will participate in the FIMEC 2023 46th International Fair of Leather, Chemicals, Components, Machinery and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil next month.

Working off the recent trend in knitted shoe uppers in the athletic footwear market, SHIMA SEIKI proposes knitted fabrics to the general footwear market as an alternative to leather. To that end SHIMA SEIKI will be showcasing the latest applications of computerized flat knitting technology to demonstrate its contributions in this field.

As pioneer of WHOLEGARMENT® knitting technology whereby the knitted product can be produced in one entire piece on the machine without linking or sewing, the company is showing the MACH2XS WHOLEGARMENT® knitting machine for the first time at FIMEC. MACH2XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles. Proposals include WHOLEGARMENT® sportswear as well as seam-free shoe uppers. For conventional shaped knitting of shoe uppers, the SVR123SP machine features a loop presser bed that permits inlay technique for producing hybrid fabrics with both knit and weave characteristics, suited to shoe upper applications that require form-fitting function, comfort, flexibility, breathability as well as strength and stiffness. SVR123SP furthermore features i-Plating inverse-plating capability for increased patterning capability, including the production of jacquard-like patterns in light-weight plain jersey stitch. Also on show will be the compact SVR093 machine with a short knitting width intended for knitting shoe uppers. Both SVR machines feature such SHIMA SEIKI innovations as DSCS® Digital Stitch Control System, spring-type moveable sinker system, stitch presser, yarn gripper and cutter, and takedown comb. Made-in-Japan quality, reliability, productivity, user-friendliness and cost-performance all combine to satisfy the high expectations of the world's shoe industry.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design and simulation suited to shoe production. Of particular interest is its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time and cost normally associated with producing actual samples for each variation. The sustainability factor is also undeniable.

More information:
flat knitting flat knitting technology Shima Seiki FIMEC

Source:

Shima Seiki

Texaid

02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.

The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.

The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

More information:
textile recycling fibre-to-fibre sorting facilities circular economy

Source:

Texaid

02.03.2023

VDMA: Way2ITMA

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

More information:
ITMA 2023 Sustainability Webinar

Source:

VDMA e. V.
Textile Machinery

(c) AkzoNobel

01.03.2023

AkzoNobel publishes 2022 annual report

AkzoNobel has published its digital Report 2022, which gives details of the company’s ongoing transformation during a challenging year of persistent worldwide uncertainty.

The Report 2022 website includes coverage of AkzoNobel’s financial results and key business developments, while the company’s progress on its sustainability ambitions is highlighted throughout.

The online report offers a wide range of interactive content and infographics. Visitors can also make use of various tools to compare key data and download tables.

Meanwhile, the Sustainability statements – traditionally one of the most visited sections – has been revamped and is themed around the key areas of climate change, circularity, and health and well-being. Several case studies also feature prominently.

AkzoNobel has published its digital Report 2022, which gives details of the company’s ongoing transformation during a challenging year of persistent worldwide uncertainty.

The Report 2022 website includes coverage of AkzoNobel’s financial results and key business developments, while the company’s progress on its sustainability ambitions is highlighted throughout.

The online report offers a wide range of interactive content and infographics. Visitors can also make use of various tools to compare key data and download tables.

Meanwhile, the Sustainability statements – traditionally one of the most visited sections – has been revamped and is themed around the key areas of climate change, circularity, and health and well-being. Several case studies also feature prominently.

More information:
AkzoNobel Annual Report digital

Source:

AkzoNobel

03.02.2023

Fiery® announces Independence

Fiery®, which provides Digital Front End (DFE) technology for production and industrial printing, announced that it has been separated from Electronics For Imaging, Inc. (“EFI”) and established as a separate company that will operate independently while remaining owned by EFI’s owner, Siris Capital Group LLC (together with its affiliates, "Siris").

Toby Weiss, long-time Chief Operating Officer and General Manager of Fiery, will continue to lead the business as CEO of Fiery, with Jeff Jacobson serving as Executive Chairman of Fiery in addition to his role as Executive Chairman of EFI.

“Fiery solutions have always been about enabling digital print and making print engines better, and this is a milestone in furthering that mission,” said Mr. Weiss. “Fiery OEM partners will benefit knowing that they are working with a company that is completely focused on adding value to their print platforms with world-class color management, high-performance image processing, and automated workflows.

Fiery®, which provides Digital Front End (DFE) technology for production and industrial printing, announced that it has been separated from Electronics For Imaging, Inc. (“EFI”) and established as a separate company that will operate independently while remaining owned by EFI’s owner, Siris Capital Group LLC (together with its affiliates, "Siris").

Toby Weiss, long-time Chief Operating Officer and General Manager of Fiery, will continue to lead the business as CEO of Fiery, with Jeff Jacobson serving as Executive Chairman of Fiery in addition to his role as Executive Chairman of EFI.

“Fiery solutions have always been about enabling digital print and making print engines better, and this is a milestone in furthering that mission,” said Mr. Weiss. “Fiery OEM partners will benefit knowing that they are working with a company that is completely focused on adding value to their print platforms with world-class color management, high-performance image processing, and automated workflows.

“Fiery will remain focused on working closely with its OEM partners, including the EFI Inkjet business, to continue developing cutting-edge technology that drives the next generation of automation, accuracy, and profit potential in digital printing,” Mr. Weiss continued. “Fiery now has a greater ability to serve as a neutral partner to ensure OEMs capture success within digital print. We look forward to accelerating our investment as a standalone company, while driving our expanding product portfolio, incorporating world-class color algorithms, and developing advanced cloud technology.”

More information:
EFI Fiery® EFI textile printing textile printer

Source:

EFI

Durchführung eines Patientenscreenings mit digitaler Maßabnahme. Foto: DITF

Durchführung eines Patientenscreenings mit digitaler Maßabnahme.

31.01.2023

Verringerte Fehlerquote bei der Herstellung textiler Orthesen

Ressourceneffizienz, Zeit- und Kostenersparnis sind wesentliche Themen in der Textil- und Bekleidungsindustrie. Die Vorteile der digitalen Fertigung gelten nicht nur für Mode, sondern auch für Medizintextilien. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) haben eine digitale Plattform entwickelt, mit der passgenaue flexible textile Orthesen ressourcen-, zeit- und kosteneffizient hergestellt werden können.

Bisher werden Orthesen vornehmlich manuell angefertigt, was zu einer hohen Fehlerquote führt. Digital basierte Fertigungsketten können diesen Ausschuss deutlich reduzieren. Für die digitale Plattform wurden an den DITF die Körperkenndaten von Patientinnen und Patienten analysiert und aufbereitet, auf deren Basis standardisierte Orthesen entwickelt werden können. Dazu wurden verschiedene Körperscanmethoden untersucht sowie Methoden entwickelt, mit denen genau Maß genommen werden kann. Die Informationen der Screenings wurden verdichtet und eine digitale Grundschnitt- bzw. Schnittmoduldatenbank erstellt.

Ressourceneffizienz, Zeit- und Kostenersparnis sind wesentliche Themen in der Textil- und Bekleidungsindustrie. Die Vorteile der digitalen Fertigung gelten nicht nur für Mode, sondern auch für Medizintextilien. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) haben eine digitale Plattform entwickelt, mit der passgenaue flexible textile Orthesen ressourcen-, zeit- und kosteneffizient hergestellt werden können.

Bisher werden Orthesen vornehmlich manuell angefertigt, was zu einer hohen Fehlerquote führt. Digital basierte Fertigungsketten können diesen Ausschuss deutlich reduzieren. Für die digitale Plattform wurden an den DITF die Körperkenndaten von Patientinnen und Patienten analysiert und aufbereitet, auf deren Basis standardisierte Orthesen entwickelt werden können. Dazu wurden verschiedene Körperscanmethoden untersucht sowie Methoden entwickelt, mit denen genau Maß genommen werden kann. Die Informationen der Screenings wurden verdichtet und eine digitale Grundschnitt- bzw. Schnittmoduldatenbank erstellt.

Aus dieser Datenbank erfolgt die individuelle Modellanpassung an die Patientinnen und Patienten. Die Überprüfung der therapeutischen Passform erfolgt mit Hilfe eines Avatars in einer 3D-Simulationssoftware. Die fertigen digitalen Schnittkonstruktionen werden an einen Cutter übertragen, wo sie aus elastischen Stoffen maschinell zugeschnitten werden. Es ist ebenfalls möglich, die Schnittmuster auf einem Plotter/Drucker als Schablonen auszudrucken und anschließend manuell zuzuschneiden. Danach werden die Zuschnitte zu fertigen textilen Orthesen verarbeitet.

More information:
Orthesen digitale Plattform

Source:

DITF

20.01.2023

Asia meets EMEA: Assyst and Style3D join forces

Style3D is sole shareholder of Assyst
Integration of both product lines from 3D design to production
Assyst remains independent within Style3D

Assyst GmbH is as of now part of Style3D. The German fashion technology market leader and the leading 3D software company are joining forces. For Assyst customers and partners nothing will change.

Die Assyst GmbH betreibt ihre Geschäfte weiterhin eigenständig, entwickelt alle ihre Produkte weiter und strebt mit Style3D eine gemeinsame, durchgängige Produktwelt an. Der erste gemeinsame Auftritt des Assyst-Style3D-Teams findet bereits auf der Assyst Experience im Rahmen der Munich Fabric Start (24.-26. Januar 2023) statt.

Assyst will continue to operate its business independently and to develop, sell, and service all its existing products. Style3D and Assyst will start to integrate their products into a universal, seamless product world. The Assyst-Style3D team will make its first joint appearance already at the end of January at the Assyst Experience at Munich Fabric Start (24-26 January 2023).

Style3D is sole shareholder of Assyst
Integration of both product lines from 3D design to production
Assyst remains independent within Style3D

Assyst GmbH is as of now part of Style3D. The German fashion technology market leader and the leading 3D software company are joining forces. For Assyst customers and partners nothing will change.

Die Assyst GmbH betreibt ihre Geschäfte weiterhin eigenständig, entwickelt alle ihre Produkte weiter und strebt mit Style3D eine gemeinsame, durchgängige Produktwelt an. Der erste gemeinsame Auftritt des Assyst-Style3D-Teams findet bereits auf der Assyst Experience im Rahmen der Munich Fabric Start (24.-26. Januar 2023) statt.

Assyst will continue to operate its business independently and to develop, sell, and service all its existing products. Style3D and Assyst will start to integrate their products into a universal, seamless product world. The Assyst-Style3D team will make its first joint appearance already at the end of January at the Assyst Experience at Munich Fabric Start (24-26 January 2023).

Both companies are deeply rooted in apparel development and production: Style3D in Asia and Assyst in EMEA. Together, they are planning to create a global product offering for producers and brands that covers the entire apparel value chain from development to production and the various sales touchpoints.

Starting point will be the integration of the flagship products of both companies – Style3D and Assyst.CAD. Style3D is currently the most advanced 3D fashion design software with a high growth rate globally. While Assyst is market leader with its 2D CAD technology in Germany, Austria, Italy and Switzerland and offers a seamless software portfolio from 2D and 3D CAD to production (Automarker) and to all sales touchpoints.

Major driver of the merger is the companies’ complimentary technology offering and the vision to create a seamless digital process from providing digital fabric and accessories up to the realization of products.

The merger also strengthens Assyst's competitive position in the 3D design sector. Style3D, in turn, will benefit from Assyst's expertise in the development, CAD and digital simulation of apparel products and the access to the international market.

Looking ahead to the future, both parties will offer 2D-based & 3D-based one-stop solutions for business clients leveraging on their global tech base and complementary serviceable resource dominance. On January 24-26, the Assyst-Style3D team will meet clients and present its products at the Assyst Experience at Munich Fabric Start.

More information:
Assyst Assyst Style3D CAD/CAM 3D-software

Source:

Assyst GmbH

19.01.2023

Alliance of the Willing at Berlin Fashion Week: VORN, Zalando, Unity and Kornit Digital

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Nine designers were challenged to create fashion capsules in eight weeks utilizing the latest technology innovations from the three alliance partners – combining digital product creation, web3-based design, digital printing, immersive circular design, 3D rendering and avatar development. All collections are on display exclusively at Berlin Fashion Week from Wednesday, January 18 to Friday, January 20 at Bikini Berlin.

The challenge follows standing room only Kornit Fashion Week events across the globe, displaying how on-demand, digital production creates a fashion world of nearly endless creativity. Hosted at the Impact Hub Berlin, the VORN Academy Program offered creators access to a holistic technology toolset - including the advanced Kornit Presto MAX single-step solution for direct-to-fabric sustainable printing. Some of the prominent designers taking part include costume and fashion designer Alexis Mersmann, Judith Bondy, AR and NFT artist Ann-Britt Dittmar, Berlin-based director Tanja Bombach, Nina Jurcic, Olga Boncheva, digital artist, and fashion designer Schirin Negahbani, Johann Erhardt, and Israeli designer Idan Yoav.

"This collaboration across four industry leaders is so unique because the result is a sum so much greater than each of its individual parts. It's a true 'alliance of the willing' that opens doors to 'phygital' collections built at the intersection of digital fashion, 3D design, and on-demand production," said Omer Kulka, Chief Innovation Officer at Kornit Digital. "We're honored to team with VORN – The Berlin Fashion Hub, Zalando, and Unity during Berlin Fashion Week to demonstrate what's possible as the physical and virtual fashion worlds come together."

"When we launched the Berlin Fashion Hub, our intent was to create a B2B environment to spark unmatched fashion and sustainability innovations. As Berlin is one of the world's most important fashion and textile centers, there is no better place to demonstrate economically succesful circularity in the fashion industry," said Professor Marte Hentschel, Co-Founder at VORN – The Berlin Fashion Hub. "Together, we're changing fashion to drive sustainability and harness the creative power of both the physical and virtual. We're proud of what's been accomplished in conjunction with an incredible group of designers, creators, and partners."

More information:
Berlin Fashion Week Kornit Digital Kornit Fashion Week

Source:

Kornit

18.01.2023

SHIMA SEIKI presents WHOLEGARMENT® knitting at Pitti Filati

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

As pioneer of seam-free WHOLEGARMENT® knitting, SHIMA SEIKI has been setting the standard almost exclusively with nearly 30 years of experience in complete garment technology. Now that benchmark has been raised once again with its new SWG-XR® flagship WHOLEGARMENT® knitting machine. SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle®. SWG-XR® features a renewed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series. SWG-XR® sets new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting.

A new proposal in WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in ultrafine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 92, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

More information:
Shima Seiki Pitti Filati knitting machines

Source:

SHIMA SEIKI MFG., LTD.

(c) Iluna Group

18.01.2023

Iluna Group returns to Interfilière

For the SS24 Iluna focuses on the most precious lightness and intangibility with its Ultralight series of jacquardtronic laces reminiscent of the delicacy of Leavers.
This season, responsible developments did not stop at responsible ingredients and processes; in fact, the company focused on the circular economy! The stylistic research started from the company's historical archive, to give life to a collection that revisits the proposals in a "modern classic" key.

The company's design team recreated the iconic designs of the line, the heart of the Black Label proposal, ILUNA's signature line offering the finest laces. Focusing on upcycling, the team reworked archival stocks, creating new value through finishings, and reweaving from scratch only the missing widths in order to present a complete, coordinated underwear/nightwear range from allovers to galoons.

For the SS24 Iluna focuses on the most precious lightness and intangibility with its Ultralight series of jacquardtronic laces reminiscent of the delicacy of Leavers.
This season, responsible developments did not stop at responsible ingredients and processes; in fact, the company focused on the circular economy! The stylistic research started from the company's historical archive, to give life to a collection that revisits the proposals in a "modern classic" key.

The company's design team recreated the iconic designs of the line, the heart of the Black Label proposal, ILUNA's signature line offering the finest laces. Focusing on upcycling, the team reworked archival stocks, creating new value through finishings, and reweaving from scratch only the missing widths in order to present a complete, coordinated underwear/nightwear range from allovers to galoons.

For the SS24 season the Iluna team continues its developments with GOTS-certified organic cotton in its galoons and allovers, to add a natural touch to its Green Label line.
Among the ingredients chosen by Iluna Group are: Renycle® and Q-NOVA®, both GRS-certified pre-consumer recycled polyamide yarns in addition to the recycled stretch ROICA™ EF by Asahi Kasei. Among the new technical developments on laces, Iluna then worked on variable elasticity modules, resulting in reinforced edges or zones of differentiated elasticity that can be variously positioned within the laces.
All this results in a comfortable, ultralight product that remains true to a high value of creativity and responsibility. The option is applicable to all the Iluna laces, with modular solutions at the customer's request on fashion items as well, where research continues on FSC-certified pre-dyed viscoses and unexpected metallic gleams with lurex.

Moreover, the continuous path through the new dimension of responsibility continues in several directions: experiments with 16 different natural dyestuffs; and continued investment in technologies that can ensure significant savings in water and energy consumption, including GREENDROP, the new GOTS-certified digital pigment printing system.
From athleisure to fashion, through lingerie to the world of high fashion, Iluna's lace continues to expand its applications, confirming its extreme versatility, remarkable performance and inimitable beauty.

More information:
ILUNA Group INTERFILIERE Paris Lace

Source:

Iluna Group

17.01.2023

EuroShop Start-up Hub für junge Retail Technology Unternehmen

Auch in diesem Messejahr werden kreative junge Unternehmen vom 26. Februar bis 02. März 2023 wieder die Gelegenheit haben, auf der EuroShop, The World´s No. 1 Retail Trade Fair, Entscheidern aus der internationalen Retail-Branche ihre Lösungen für einen modernen, zukunftsfähigen Handel vorzustellen und ihre Kontakte auszubauen.

Dazu wird es wieder eine eigene Präsentationsfläche, den sogenannten Start-up Hub geben, der in der Dimension Retail Technology angesiedelt ist. Die Newcomer haben die Gelegenheit, ihre Entwicklungen und Angebote beispielsweise zu künstlicher Intelligenz, Analyselösungen, In-Store-Marketing, Smart Stores, POS-Lösungen und vieles mehr zu erläutern.

Ergänzt wird die Sonderfläche durch die Start-up Stage, auf der junge Unternehmerinnen und Unternehmer ihre Best Practices und aktuellen Entwicklungen aus erster Hand vorstellen.

Einige Unternehmen des Start-up Hubs im Kurzportrait:

Adapta Robotics
Adapta Robotics ist Hersteller des Roboters ERIS, der speziell für den Einzelhandel entwickelt wurde und zur automatischen Erkennung von nicht mehr vorrätigen Waren und zur Vermeidung von Regalpreisfehlern eingesetzt wird.

Auch in diesem Messejahr werden kreative junge Unternehmen vom 26. Februar bis 02. März 2023 wieder die Gelegenheit haben, auf der EuroShop, The World´s No. 1 Retail Trade Fair, Entscheidern aus der internationalen Retail-Branche ihre Lösungen für einen modernen, zukunftsfähigen Handel vorzustellen und ihre Kontakte auszubauen.

Dazu wird es wieder eine eigene Präsentationsfläche, den sogenannten Start-up Hub geben, der in der Dimension Retail Technology angesiedelt ist. Die Newcomer haben die Gelegenheit, ihre Entwicklungen und Angebote beispielsweise zu künstlicher Intelligenz, Analyselösungen, In-Store-Marketing, Smart Stores, POS-Lösungen und vieles mehr zu erläutern.

Ergänzt wird die Sonderfläche durch die Start-up Stage, auf der junge Unternehmerinnen und Unternehmer ihre Best Practices und aktuellen Entwicklungen aus erster Hand vorstellen.

Einige Unternehmen des Start-up Hubs im Kurzportrait:

Adapta Robotics
Adapta Robotics ist Hersteller des Roboters ERIS, der speziell für den Einzelhandel entwickelt wurde und zur automatischen Erkennung von nicht mehr vorrätigen Waren und zur Vermeidung von Regalpreisfehlern eingesetzt wird.

brighter AI
brighter AI bietet Anonymisierungs-Lösungen für Bilder und Videos auf der Basis modernster Deep-Learning-Technologie.

CNT
CNT Technology rüstet die vorhandene Kühltechnik mit sogenannten „SmartSaver“-Molekularfiltern unkompliziert auf und kann so unerwartete Ausfälle und deren Folgen erheblich reduzieren.

Crunch Analytics
Crunch Analytics ist eine im Retail-Bereich tätige Agentur für fortgeschrittene Datenanalyse, die Entscheidungsträger dabei unterstützt, eine hohe Rentabilität und Effizienz zu erreichen sowie Umweltbelastungen zu verringern.

Envelope
Envelope ist ein auf den Einzelhandel spezialisiertes Technologie-Startup, das Supermarktketten und Unternehmen der FMCG-Branche dabei hilft, eine lückenlose Verfügbarkeit von Produkten im Regal zu gewährleisten.

Freshflow
Freshflow ist eine KI-gestützte Bestelllösung für den Lebensmitteleinzelhandel, die eigens für die besonderen Herausforderungen im Handel mit Frischware entwickelt wurde.

GoodMaps
GoodMaps bietet eine branchenführende Navigations- und Karten-Technologie für die barrierefreie und integrative Wegweisung in Räumen und im Außenbereich per App.

GreenBill
GreenBill ermöglicht es Unternehmen, digitale Belege auszustellen. Im Gegensatz zu vergleichbaren Anbietern benötigt GreenBill keine Schnittstelle zu Kassensystemen, sondern kann ähnlich wie ein Drucker an jede Kasse angeschlossen werden.

Magenes
Magenes ist eine datenbasierte PLM- und Supplier Collaboration-Plattform. Mit Hilfe von KI-gesteuerten Auswertungen und Empfehlungen sowie durch eine nahtlose Integration in bestehende IT-Ökosysteme hilft die Plattform bei der Entwicklung, Planung und Lieferung der nächsten Kollektion.

Nomitri
Nomitri ist ein KI-Softwareunternehmen aus Berlin, das aktuelle Forschungsergebnisse auf dem Gebiet des eingebetteten, visuellen Deep Learning für innovative Lösungen im Einzelhandel und Quick Commerce nutzt.

Olmaya
Olmaya ist eine Stiftung, die eine Brücke zwischen israelischen Retail Technology Unternehmen und dem Weltmarkt schlagen will. Am Stand von Olmaya haben deshalb zehn innovative Start-ups aus Israel die Möglichkeit, ihre Entwicklungen dem Messe-Publikum vorzustellen. Die Start-ups kommen aus dem Hardware- und Software-Bereich und wollen die Einzelhandelsbranche nachhaltig verändern. Die ausgewählten Unternehmen stellen dabei nur einen Ausschnitt der lebendigen und dynamischen Startup-Szene in Israel dar.

Oriient
Oriient ist ein hochpräzises lndoor-Navigationssystem für den Einzelhandel und Smart Buildings, das den Besuch im Laden verbessern möchte.

Purcell
Das S1 von Purcell ist ein plastikfreies, intelligentes Spender- und Nachfüllsystem für Lebensmittel und Produkte des täglichen Bedarfs.

Redimi
Die Redimi GmbH ist ein deutsches Start-up, das Anfang 2022 in Berlin mit der Vision gegründet wurde, die Branche der digitalen Geschenkkarten und Coupons im Einzelhandel sowie im E-Commerce zu modernisieren.

Snapfix
Snapfix ist eine Aufgabenverwaltungs-Plattform, mit der Wartungsaufgaben in Geschäften und Einkaufszentren von überall gesteuert werden können.

Sykell
Sykell steht für zeitgemäße und nachhaltige Mehrwegverpackungen im Einzelhandel. Die Mehrweg-Lösung „Einfach Mehrweg“ sorgt für die effiziente Erfüllung der Mehrwegpflicht nach §33 VerpackG, indem es innovative Mehrwegbehälter und ein offenes und zentral gesteuertes Pool-System anbietet.

TareTag
TareTag bringt mittels eines QR-Codes, der dauerhaft auf einem Mehrweg-Gefäß angebracht wird, Verpackungsinformationen auf ein digitales Etikett.

Tokinomo
Tokinomo ist ein Regalwerberoboter, der Produkte ins Rampenlicht stellt und eine völlig andere Art der Markenkommunikation am Point of Sale ermöglicht.

Viziotix
Viziotix bietet eine leistungsstarke Barcode Scanning-Software für den Einzelhandel.

Mehr Informationen zu den Unternehmen finden Sie hier.

More information:
EuroShop Einzelhandel digital Retail Retail Technology

Source:

Messe Düsseldorf GmbH

Photo CHT Gruppe

16.01.2023

CHT TEXTILE SOLUTIONS - Smart approaches to energy cost reduction and climate protection

Within its TEXTILE SOLUTIONS, the CHT Group has developed solution approaches for manufacturing companies in the textile value chain that have to use a lot of energy for their production. This is intended to compensate high energy costs and make a positive contribution to climate protection.Application specialists work with customers to develop individual savings potentials that are specifically tailored to the production facilities and requirements. Thus, depending on the process, fabric and machine, energy savings of up to 30% can be achieved with the use of innovative CHT textile auxiliaries, dyes/pigments and the corresponding process optimisations. In addition, the numerous concepts and optimally matched products can minimise water consumption or shorten the process time.

Energy-efficient cold bleaching instead of pad-steam bleaching processes in continuous pretreatment and the 4SUCCESS process for energy-efficient and resource-saving pretreatment and dyeing of cotton help to save energy. Likewise, the use of polymer binders, which do not require energy-intensive fixation, saves energy.

Within its TEXTILE SOLUTIONS, the CHT Group has developed solution approaches for manufacturing companies in the textile value chain that have to use a lot of energy for their production. This is intended to compensate high energy costs and make a positive contribution to climate protection.Application specialists work with customers to develop individual savings potentials that are specifically tailored to the production facilities and requirements. Thus, depending on the process, fabric and machine, energy savings of up to 30% can be achieved with the use of innovative CHT textile auxiliaries, dyes/pigments and the corresponding process optimisations. In addition, the numerous concepts and optimally matched products can minimise water consumption or shorten the process time.

Energy-efficient cold bleaching instead of pad-steam bleaching processes in continuous pretreatment and the 4SUCCESS process for energy-efficient and resource-saving pretreatment and dyeing of cotton help to save energy. Likewise, the use of polymer binders, which do not require energy-intensive fixation, saves energy.

Efficient pretreatment with the new polymer technology CPT (Comb Polymer Technology) achieves good cleaning effects even with low liquor ratios and thus less water to heat up. To save costs for energy-consuming heating, there is also the gentle low-temperature fixation in the easy care finishing. The OrganIQ EMS Jeans system enables jeans finishing with a reduced application temperature compared to standard processes.

With TIME BOOST, a process for fast polyester dyeing processes, not only significant energy but also time savings are achieved by omitting pre-washing and by shortening heating and migration times. SHORT CUT also leads to shorter process times when dyeing polyamide.

To avoid cost-intensive intermediate drying, the CHT Group offers the SCREEN-2-SCREEN with PRINTPERFEKT S2S which facilitates printing in a wet-on-wet technology.

In addition to numerous other products, the CHT Group also offers its customers digital tools to optimally support process optimizations. The "BEZAKTIV Soaping Advisor" calculation program within the CHT Textile Dyes app can be used to evaluate and improve dyeing and soaping processes in a simple and target-oriented way.

More information:
CHT Group TEXTILE SOLUTIONS energy cost reduction

Source:

CHT Group

(c) MUNICH FABRIC START

13.01.2023

MUNICH FABRIC START announces programme for upcoming event

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

Next to David Shah (View-Publications), the panel will include Siems Luckwaldt (CAPITAL and BUSINESS PUNK, RTL Germany), Shamin Vogel (WeAr Global Magazine), Ben Hanson (The Interline), Maria Cristina Pavarini (The SPIN OFF) and Carl Tillessen (DMI)

Digital Era
From digital colour apps, digital twins and virtual models to 3D simulation and virtual dressing rooms - the world of digital fashion will not only be discussed in numerous lectures in Munich, but also brought to life in the new Assyst Experience. Whether it's Carola Seybold, Head of Global Key Accounts at Pantone, Jan Hilger from Roland Berger, Arndt Johannes from Verce, Dr. Stefan Hauswiesner, CEO of Reactive Reality or the experts of the panel "Textilfabrik X.0 - New Marketing Buzz Words or One Step Ahead": everyone will be looking at virtual fashion from a different angle and providing insights into the latest state of the art. In her trend presentation "The weird & wonderful world of fashion cores" at BLUEZONE, Angela Velasquez (Rivet) sheds light on how viral TikTok trends are reshaping denim merchandising.

Sustainable Future
Digitisation and sustainability - the third major theme of the event programme - could not be more closely intertwined. Lisa Lang, Director of Policy & EU Affairs Orchestrator of EIT Climate KIC in an interview with Muchaneta ten Napel (Shape Innovate) kicks things off about the importance of a green transformation for the industry. Other topics in focus: Liv Simpliciano from Fashion Revolution gives an overview of where the world's biggest fashion brands and retailers stand in terms of transparency. Tricia Carey from Renewcell, David Shah (View-Publications), Lien van der Schueren and Guy Buyle (CISUTAC & HEREWEAR), Mateusz Wielopolski (Circulix) and Mario Malzacher (Circular.Fashion) critically discuss whether the circular economy is really the solution for everything or just a placebo. Circular ecosystems are also presented by Franziska von Becker from Hachmeister & Partner.

The race of the new sustainable materials of the future will be opened by Kirsi Terho from Infinited Fiber, Kuben Edwards from Onezero8, Marianne Uddman from Trustrace and Simon Angel, Sustainable Innovations Curator of MUNICH FABRIC START in a panel discussion with Muchaneta ten Napel (Shape Innovate). New products for a sustainable future in the denim industry will be discussed at BLUEZONE.
Another highlight: In cooperation with the Transformers Foundation, an expert panel will also be held at BLUEZONE on both days of the trade show.

Trends Spring.Summer 2024
Gerd Müller-Thomkins, Carl Tillessen and Niels Holger Wien from the Deutsches Mode Institut (DMI) see a "vibe shift" - a turning point. They will analyse what this means for fashion in their trend presentation on Wednesday. The Women's Fashion Trends SS 24 with the must haves of the season will be analysed by Karin Schmitz from the Trend Forecast Institute Peclers Paris - from the glamorous appearance in everyday life, to the play with gender identity, to simplicity combined with functionality and mobility.

More information:
munich fabric start BLUEZONE KEYHOUSE

Source:

MUNICH FABRIC START / KERN. Consulting

Photo Pixabay

13.01.2023

Zünd: New subsidiary in Spain

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

Zund Ibérica currently employs 15 people. With more than 1,000 cutters installed, Zund Ibérica is one of the most experienced distributors of both digital cutting systems and software and workflow solutions on the Iberian market. It has its own showroom, which allows customers and interested parties to experience the many possibilities of Zünd’s digital cutting technology in person. Its staff consists of proven experts in consulting, training, installation, and service.

More information:
Zünd Systemtechnik AG acquisition Spain

Source:

Zünd Systemtechnik AG

Zyler

05.01.2023

Zyler: Virtual try-on in fashion stores

Digital display experience platform, Raydiant, partners with Zyler to offer virtual try-on to fashion retailers in-store.

Digital display experience platform, Raydiant, is now offering an exciting new virtual try-on solution to their fashion retail customers. Virtual try-on is brought to stores by Zyler, fashion technology that allows customers to see themselves in any outfit without having to physically try them on.

This means that retail spaces can be transformed, maximizing space and making use of the latest innovations in fashion. When customers see themselves in items before purchase, they are more excited about the products, their confidence is boosted, and the brand becomes more inclusive. Customers shop and buy more, and are less likely to return the products they purchase. Raydiant presents this new virtual try-on offering in combination with their digital signage solutions.

Digital display experience platform, Raydiant, partners with Zyler to offer virtual try-on to fashion retailers in-store.

Digital display experience platform, Raydiant, is now offering an exciting new virtual try-on solution to their fashion retail customers. Virtual try-on is brought to stores by Zyler, fashion technology that allows customers to see themselves in any outfit without having to physically try them on.

This means that retail spaces can be transformed, maximizing space and making use of the latest innovations in fashion. When customers see themselves in items before purchase, they are more excited about the products, their confidence is boosted, and the brand becomes more inclusive. Customers shop and buy more, and are less likely to return the products they purchase. Raydiant presents this new virtual try-on offering in combination with their digital signage solutions.

More information:
virtual try-on Zyler Retail Technology

Source:

Anthropics Technology

(c) EFI GmbH

30.12.2022

EFI Reggiani with textile printing solutions at India ITME 2022

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.

More information:
EFI Reggiani India ITME textile printing textile printer

Source:

EFI GmbH

Photo: Messe Düsseldorf, Constanze Tillmann

21.12.2022

WearRAcon Europe Conference to be held at A+A 2023

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Being able to walk again despite a serious injury, handle heavy parts without outside help or simply do overhead work comfortably and for extended periods of time - the advantages of exoskeletons have already convinced numerous industries. Exoskeletons and wearables are now already being used successfully in industry and commerce, and major machine builders and automakers as well as the medical sector are continuing to experiment with man-machine connections. Currently, the global market volume for exoskeletons is valued by leading analysts at over US$20 billion by 2030.¹

The WearRAcon Europe Conference 2023 will provide new insights into the promising world of exoskeleton systems from different perspectives and, in conjunction with the A+A Congress, set future-oriented impulses. Lectures by renowned exoskeleton pioneers combined with testimonials presented by users from a variety of industries and keynotes by experts will round off the programme. And, like at the previous A+A, a Self-Experience Space will again be set up so that the exoskeleton systems of various manufacturers can be tested in realistic work scenarios.

In parallel with the Self-Experience Space, the large live study Exoworkathlon will also take place again. Trainees from various mechatronic training courses have to complete a concourse and perform holding, lifting and assembling tasks, which have been specially developed with the industry. Data is prospectively collected with different measuring sensors to measure the effects of exoskeletons. In the Exoworkathlon, the IPA focuses especially on prevention for young employees in order to raise awareness of the issue and counteract ailments at an early stage.

¹ (Interview Trans.INFO mit Armin G. Schmidt, CEO von German Bionic (01/2021).

More information:
A+A WearRAcon exoskeleton wearables personal protective equipment

Source:

Messe Düsseldorf GmbH