From the Sector

Reset
349 results
24.11.2021

PERFORMANCE DAYS cancelled in Munich on December 1-2, 2021

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

Source:

Performance Days

19.11.2021

Neuer Master an der HSLU: Design meets Nachhaltigkeit

Wie kann Design dazu genutzt werden, die großen sozialen und ökologischen Herausforde-rungen unserer Zeit anzugehen? Diese Frage steht im Mittelpunkt des Master Eco-Social Design der Hochschule Luzern. Das neue Studium startet 2022 und wird am 26. November 2021 an den Info-Tagen Design & Kunst vorgestellt.

Als «wicked problem» wird ein Problem bezeichnet, das besonders schwierig zu lösen ist, weil es komplexe, teils widersprüchliche Facetten aufweist. Ein aktuelles Beispiel mit besonders weitreichenden Folgen: Können wir den menschengemachten Klimawandel stoppen, ohne die ökonomische Entwicklung ärmerer Länder zu ersticken? Wie man solche wicked problems mit den Mitteln des Designs angeht, lernen ab Herbst 2022 die Studierenden des neuen Master Eco-Social Design. Der erste Master seiner Art in der Schweiz ist am Departement Design & Kunst der Hochschule Luzern angesiedelt. Es handelt sich um eine Vertiefung des bestehenden Master-Studiengangs Design.

Wie kann Design dazu genutzt werden, die großen sozialen und ökologischen Herausforde-rungen unserer Zeit anzugehen? Diese Frage steht im Mittelpunkt des Master Eco-Social Design der Hochschule Luzern. Das neue Studium startet 2022 und wird am 26. November 2021 an den Info-Tagen Design & Kunst vorgestellt.

Als «wicked problem» wird ein Problem bezeichnet, das besonders schwierig zu lösen ist, weil es komplexe, teils widersprüchliche Facetten aufweist. Ein aktuelles Beispiel mit besonders weitreichenden Folgen: Können wir den menschengemachten Klimawandel stoppen, ohne die ökonomische Entwicklung ärmerer Länder zu ersticken? Wie man solche wicked problems mit den Mitteln des Designs angeht, lernen ab Herbst 2022 die Studierenden des neuen Master Eco-Social Design. Der erste Master seiner Art in der Schweiz ist am Departement Design & Kunst der Hochschule Luzern angesiedelt. Es handelt sich um eine Vertiefung des bestehenden Master-Studiengangs Design.

«Wicked problems sind schwierig zu lösen, weil sie tiefgreifende Verhaltensänderung von Einzelnen, Organisationen oder der ganzen Gesellschaft erfordern», sagt Jan-Christoph Zoels, Leiter des neuen Masters. Ökosoziale Designerinnen und Designer setzen bei diesem Verhalten an. Sie entwerfen beispielsweise nachhaltigere Produktionsabläufe in Unternehmen, fördern eine an sozialen und ökologischen Kriterien ausgerichtete Stadtplanung oder unterstützen Outreach-Projekte von NGOs und Stiftungen. Dazu nutzen sie die ganze Bandbreite des Design-Instrumentariums: von Produkten über Visualisierungen bis zur Entwicklung von Services und Prozessen in Betrieben und Verwaltungen.

Von alten Matratzen und fairen Schuhen
Drei Abschlussarbeiten aus dem Master-Studiengang Design veranschaulichen die Vielfalt ökosozialer Designprojekte – Arbeiten dieser Art werden Studierende künftig in der Vertiefung Eco-Social Design realisieren:

  • Joel Hügli (Abschluss 2022) arbeitet mit der Firma Roviva an einem Recycling-Konzept für Matratzen, Prototyp inklusive. Hintergrund ist der Umstand, dass in der Schweiz jährlich bis zu einer Million Altmatratzen verbrannt statt wiederverwertet werden.
  • Meri Zirkelbachs Abschlussarbeit (2019) bewegt sich an der Schnittstelle zwischen Design und Materialforschung: Sie analysierte im Projekt WhiteWood die Anwendungsmöglichkeiten eines von der ETH Zürich entwickelten ökologischen Werkstoffs auf Holzbasis.
  • Catalina Jossen Cardozo (Abschluss 2016) entwickelte die Online-Plattform «By Maria», die kolumbianische Schuhmacherinnen mit Designern und der Kundschaft zusammen-bringt. Das Ziel von By Maria: Schuhe fair vermarkten, ohne Mensch und Umwelt auszubeuten.

Öko-soziale Designerinnen und Designer lösen nicht im Alleingang die Probleme der Welt, wie diese Auswahl zeigt. Vielmehr arbeiten sie mit Expertinnen und Experten aus Forschung, Kultur, öffentlichem Sektor und Industrie zusammen. Dabei steuern sie neue, ungewohnte Perspektiven auf Fragestellungen der ökologischen und sozioökonomischen Nachhaltigkeit bei. Entsprechend richtet sich der neue Master an Personen mit unterschiedlichen beruflichen Hintergründen, wie Leiter Jan-Christoph Zoels ausführt: «Unsere Studierenden können von Haus aus IT-Profis, Sozialarbeiter, Architektinnen oder Mitarbeitende von öffentlichen Verwaltungen sein. Hauptsache, sie haben eine Affinität für Design und suchen gerne über die Disziplingrenzen hinweg nach neuen Lösungsansätzen für die wicked problems unserer Zeit.»

Mehr Informationen zum Studium finden sich auf der Website des Master Eco-Social Design.

Source:

Hochschule Luzern – Design & Kunst

16.11.2021

Gina Tricot and We aRe SpinDye in a resource-efficient collaboration

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

One of Gina Tricot's focus is to explore new methods and technologies in sustainability, which makes the collaboration with We aRe Spin Dye feel just right for us. Together we get a product with more durable and circular fibers, in addition with a more sustainable textile production with a focus on minimal water use. We are extremely proud of this collaboration. says Emma Garrote, Global Production & Sustainability Manager at Gina Tricot.

Gina Tricot is a shining example of an agile organization with short decision-making processes. They have managed to enthuse both the design and production department. It has been crucial to reach the launch of this collection that takes place today, says Andreas Andrén, CEO of We aRe SpinDye®.

Gina Tricot
Gina Tricot is a Swedish fashion brand that offers fashion to women in over 30 countries. Today, Gina Tricot has over 160 stores around Sweden, Norway, Denmark and Finland, as well as e-commerce throughout Europe. With around 1,900 employees, 98% of these are girls. For Gina Tricot, it is important to build pride from the inside out, we are a company that chooses to invest in and highlight women.

We aRe Spin Dye
The company is a Swedish cleantech company that provides and offers a process and platform for production and quality control that enables players in the fashion and clothing industry to significantly reduce their environmental impact. The company's business concept is to establish a new, sustainable and transparent standard for dyeing synthetic textiles in the fashion and apparel industry in a simple and user-friendly way.

More information:
We are SpinDye We aRe Spin Dye
Source:

We aRe SpinDye

(c) Abu Dhabi Government Media Office
15.11.2021

Partnership between ADNOC and Borealis to expand Borouge Facility

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

The world-scale expansion confirms both partners’ commitment to the growth of Borouge and to support chemical production, and advanced manufacturing and industry in Ruwais, a key pillar of Abu Dhabi and the UAE’s technology, innovation and industrial development strategy. Borouge produces crucial industrial raw materials, which are exported to customers globally and used by local companies, boosting local industrial supply chains and enhancing In-Country Value.

Borouge 4 will capitalize on the projected growth in customer demand for polyolefins, driven by their use in manufactured products in the Middle East, Africa and Asia. The facility will also enable the next phase of growth at the Ruwais Industrial Complex by supplying feedstock to the TA’ZIZ Industrial Chemicals Zone.

Borouge 4 will have an industry-leading focus on sustainability leveraging the capabilities of both shareholders. The facility will utilize Borealis’ proprietary Borstar technology, to produce a product portfolio focused on durable applications for energy, infrastructure, advanced packaging, and agriculture sectors. This unique technology, in combination with hexene co-monomer, will enable the production of advanced packaging grades with up to 50% recycled polyethylene content.

Subject to an in-depth study, a Carbon Capture unit that would reduce CO2 emissions by 80% could also be operational in time for Borouge 4’s start-up. The facility is also designed to capitalize on ADNOC’s recent initiatives on clean energy, decarbonizing its power supply through access to Abu Dhabi’s clean power sources. These initiatives are aligned with the UAE Net Zero by 2050 Strategic Initiative.

The first Borouge facility, producing 450,000 tons of polyethylene per annum was commissioned in 2001. Borouge 2 and Borouge 3 took capacity to 2 million tons and 4.5 million tons of polyethylene and polypropylene per annum in 2010 and 2014 respectively.  Borouge 4 will boost the company’s annual polyolefin production to 6.4 million tons, making Borouge one of the world’s largest single-site polyolefin facilities.

The new Borouge 4 facility will comprise:

  • An ethane cracker, with 1.5 million tons ethylene output per annum, which will be the fourth cracker in Borouge’s integrated petrochemical complex in Ruwais
  • Two additional Borstar® polyethylene (PE) plants, each with 700 thousand tons per annum capacity, using state-of-the-art Borealis Borstar third generation (3G) technology
  • A cross-linked PE (XLPE) plant of 100 thousand tons per annum capacity.
  • A hexene-1 unit, which will produce co-monomers for certain grades of polyethylene.
Source:

Borealis

10.11.2021

New JEC Group Publication

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

The purpose of the work, rather than results, which quickly become obsolete, is to give examples of approaches contributing to and moving towards sustainability. To do so, JEC Group has arbitrarily split
the value chain into five parts:
• Background, LCA, circular economy ;  
• Concept, design, raw materials ;  
• Production, processes, waste ;  
• Recycling, recovery ;
• Applications. 
 
The book “Composites sustainability Report 2021” is for sale online.

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

08.11.2021

ROICA™ by Asahi Kasei turns 50 and showed latest smart stretch fabric range at MarediModa

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

At MarediModa – the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors - ROICA ™ partners such as Eusebio, Iluna Group, Interjersey Milano, Maglificio Ripa, Penn Textile Solutions GmbH, Piave Maitex and Sofileta shared their latest fabric innovations where sustainability cutting-edge performance and design realized with ROICA™ premium stretch ingredient, were on stage.

04.11.2021

Sarah Borghi: New Green Collection with a range of sustainable tights and stockings

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

The evolution of the Green Collection, the sustainable hosiery collection first launched in 2020, confirms the efforts of the brand in promoting a new generation of attractive fashion and design which actively encourages and supports a responsible change in culture and smart products offer.

For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.

The evolution of the Green Collection, the sustainable hosiery collection first launched in 2020, confirms the efforts of the brand in promoting a new generation of attractive fashion and design which actively encourages and supports a responsible change in culture and smart products offer.

Lately, a decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze, Sarah Borghi’s top-notch producer and first Italian company in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.

The collection
The collection presents a range of versatile, colorful products combined with extra-luxury comfort and designed for every type of woman: from seductive tights to everyday socks, together with knee- highs, up to athleisure with leggings.
 
The responsible collection features two new generation materials. One is Amni Soul Eco®, the world’s first biodegradable in anaerobic conditions polyamide 6.6 yarn that degrades in around 5 years* after disposing of in landfill, developed by SOLVAY and produced and distributed by FULGAR. The other is ROICA™ V550 by leading fiber manufacturer Asahi Kasei, a premium sustainable stretch yarn boasting the Gold Level Material Health Certificate by Cradle-to-Cradle Product Innovation Institute** as it has been evaluated for impact on human and environmental health. Moreover, it smartly breaks down without releasing harmful substances in the environment according to Hohenstein Environment Compatibility Certification. Key elements that makes ROICA™ V550 a precious choice when it comes to Circular Economy material approach.

Source:

Sarah Borghi / GB Network – for ROICA™

(c) Tonello
26.10.2021

Tonello presents O-Zone, a new dimension of garment finishing

Tonello presents O-Zone, a new garment finishing project developed with Candiani Denim, a leading brand in the denim industry.

O-Zone, just presented at Kingpins 24, represents a new leap in quality and an important step in the growth of Tonello'a range of ozone processes, which are born from direct experience, research and a deeper knowledge of technology.

First with ECOfree2, then with SaniCare and OBleach, now with O-Zone, Tonello are defining ozone finishing and taking it to its maximum expression in every field of application: creation of special effects, garment sanitization, cleaning and reduction of water consumption, etc.

What is O-Zone?
At first glance it is similar to a cabinet. A special cabinet, however, inside which the garments are placed and treated, through an innovative, sustainable, responsible process.

A process that is also flexible, fast, safe and fully controllable by a touch screen that allows you to easily set all the desired parameters to obtain unique and customizable aesthetics, such as localized discoloration and lightening, sun-faded looks and degradé effects.

Tonello presents O-Zone, a new garment finishing project developed with Candiani Denim, a leading brand in the denim industry.

O-Zone, just presented at Kingpins 24, represents a new leap in quality and an important step in the growth of Tonello'a range of ozone processes, which are born from direct experience, research and a deeper knowledge of technology.

First with ECOfree2, then with SaniCare and OBleach, now with O-Zone, Tonello are defining ozone finishing and taking it to its maximum expression in every field of application: creation of special effects, garment sanitization, cleaning and reduction of water consumption, etc.

What is O-Zone?
At first glance it is similar to a cabinet. A special cabinet, however, inside which the garments are placed and treated, through an innovative, sustainable, responsible process.

A process that is also flexible, fast, safe and fully controllable by a touch screen that allows you to easily set all the desired parameters to obtain unique and customizable aesthetics, such as localized discoloration and lightening, sun-faded looks and degradé effects.

O-Zone is designed for small productions and is ideal for doing experiments and research directly on the garment, quickly verifying the result.

Source:

Tonello / Effe-Bi Srl

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup

Intertextile Shanghai Home Textiles provided vital business platform (c) Messe Frankfurt (HK) Co Ltd
25.10.2021

Intertextile Shanghai Home Textiles provided vital business platform

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

While a number of international exhibitors participated this year with individual booths, the Belgium Pavilion presented home and contract products and five Chinese regional pavilions from Hangzhou, Shaoxing, Huzhou, Haining, and Tongxiang also featured. Two trend forums also provided inspiration for 2022, while the IKASAS Japanese Home Design Gallery, New Voices of Top Youth Upholstery Designers City Roving Exhibition and China International Fiber Art Exhibition gave further insights into various aspects of the industry.

Fair’s fringe programme highlights sustainability, design and more
As with all of Messe Frankfurt’s textile fairs around the world, sustainability is a big focus. A number of events under this focus took place in the fair’s fringe programme, including a half day forum titled How Sustainable Fashion is Reshaping Lifestyles, with a range of innovative companies and prestigious universities participating as speakers.

The Design Talk session featured a series of presentations from leading international designers, including from China, Japan and Europe, to share their design insights. And a new concept this year, titled New Voices of Top Youth Upholstery Designers – Intertextile Upholstery Design and City Roving Exhibition, showcased the work of six groups of young local designers from across China who presented the interior design ideas of their generation through displays and a forum. And reflecting the changes that continue to accelerate in the industry, a number of e-commerce and cross-border trade events took place, including sessions from the likes of JD Home, AliExpress and Tmall.

The 2022 Intertextile Shanghai Home Textiles – Spring Edition will take place from 9 – 11 March, while the Autumn Edition is scheduled for 23 – 25 August 2022.

21.10.2021

Talking about Water Conservation with Officina+39

On 21st October the Managing Director of Officina+39 Andrea Venier has joined a panel discussion in the prestigious arena of the Kingpins24 Digital Show. He contributed to the discussion with his and Officina+39’s point of view on “Water Conservation”, together with Emrah Özkorkmaz from Bregla and Taimur Malik from Stylers International, with Edward Hertzman from Sourcing Journal & Rivet as moderator.

Water crisis remains one of the top issues for humanity and 90% of the world's natural disasters are related to water. Officina+39 has been working hard to rethink the way water is used throughout the denim processes: Andrea's contribution emphasized the company’s practical and consolidated experience in this field, as in recent years their main objective has been to drastically reduce water use in line with UN SDG6.

On 21st October the Managing Director of Officina+39 Andrea Venier has joined a panel discussion in the prestigious arena of the Kingpins24 Digital Show. He contributed to the discussion with his and Officina+39’s point of view on “Water Conservation”, together with Emrah Özkorkmaz from Bregla and Taimur Malik from Stylers International, with Edward Hertzman from Sourcing Journal & Rivet as moderator.

Water crisis remains one of the top issues for humanity and 90% of the world's natural disasters are related to water. Officina+39 has been working hard to rethink the way water is used throughout the denim processes: Andrea's contribution emphasized the company’s practical and consolidated experience in this field, as in recent years their main objective has been to drastically reduce water use in line with UN SDG6.

Andrea pointed out how “fashion industry is still currently deeply rooted in a linear approach: make, use, dispose.” Accordingly to Andrea and Officina+39, the fashion world is becoming aware of this reality and is trying to reinvent itself in order to decrease the use of this precious resource and its negative impacts but there is still work to do in order to redesign a better sustainable model, where circularity should represent the new sustainability: circularity not only when it comes to the materials, but also to water.

In the textile industry water is used as the vehicle for colors and chemical auxiliaries but luckily today many technologies aim at significantly reducing water consumption. Officina+39 is really focused on this target: Andrea explained that “Officina+39 has developed the AQUALESS MISSION, a process suitable for conventional machines that leads to a 75% reduction of the water typically used in denim and garment laundry processes, using a waterless technology and saving costs for producers.”

Despite the start-up cost of investing in the development of sustainable technologies may discourage some in the industry, it is about time to realize that these actions cannot be delayed and that we will increasingly hear about water scarcity, water stress and water risk.

Andrea stated: “It is necessary to develop water management strategies and systems in any company: today there is ISO 14000 related to environmental management, but I believe that governments, brands and related organisations should think about an ISO related just to water management. In this way, every company can understand how much value can be generated in the medium-term and how much money could be saved by investing in this kind of technologies. To create new standards related to water management, we must change the approach.”

Source:

Officina+39 / Menabò

ANDRITZ to supply a neXline wetlace hybrid line to Albaad, Israel © ANDRITZ
Albaad orders neXline wetlace hydrid - handshake at INDEX show
20.10.2021

ANDRITZ to supply a neXline wetlace hybrid line to Albaad, Israel

International technology group ANDRITZ has received an order from Albaad Massuot Yitzhak Ltd. to supply a neXline wetlace hybrid line for their Dimona facilities, Israel. The line will produce a wide variety of pulp-based wet wipes and is scheduled for start-up during the third quarter 2023.

The state-of-the-art neXline wetlace hybrid is the perfect combination of inline drylaid and wetlaid web forming with hydroentanglement and drying, including quality control equipment and a Metris Industry 4.0 package. All components will be delivered by ANDRITZ and are designed to produce first-class fabrics, including biodegradable, carded-pulp and flushable/dispersible nonwovens for end uses as wipes.

Tobias Schäfer, Vice President Sales at ANDRITZ Nonwoven, comments: “Our innovative production line gives Albaad enormous flexibility in the production of wipes. In addition, the Metris digitalization package by ANDRITZ will provide Albaad with highly efficient and smart operation.”

International technology group ANDRITZ has received an order from Albaad Massuot Yitzhak Ltd. to supply a neXline wetlace hybrid line for their Dimona facilities, Israel. The line will produce a wide variety of pulp-based wet wipes and is scheduled for start-up during the third quarter 2023.

The state-of-the-art neXline wetlace hybrid is the perfect combination of inline drylaid and wetlaid web forming with hydroentanglement and drying, including quality control equipment and a Metris Industry 4.0 package. All components will be delivered by ANDRITZ and are designed to produce first-class fabrics, including biodegradable, carded-pulp and flushable/dispersible nonwovens for end uses as wipes.

Tobias Schäfer, Vice President Sales at ANDRITZ Nonwoven, comments: “Our innovative production line gives Albaad enormous flexibility in the production of wipes. In addition, the Metris digitalization package by ANDRITZ will provide Albaad with highly efficient and smart operation.”

Dan Mesika, CEO and President of Albaad, says: “We are dedicated to developing new products – such as eco-friendly, biodegradable wipes. As pioneering manufacturers of our Hydrofine® flushable wipes, we are committed to environmental sustainability. Thanks to the new ANDRITZ line, we will enlarge the product portfolio at our Dimona production site with innovative fabrics and high efficiency.

Gadi Choresh, President of the Nonwovens Division at Albaad, says: “Our knowledge and experience in drylaid and wetlaid technology, together with the state-of-the-art equipment supplied by ANDRITZ, will enable us to provide the market with natural-source nonwovens and the best answer to the market demand.”
 
Albaad is one of the world’s three largest wet wipe manufacturers and is committed to delivering excellent wipes for every need. The company runs world-leading production facilities on three continents, each equipped with the latest technologies. Albaad produces spunlace and flushable fabrics in its facilities as well as purchasing from other roll goods suppliers in order to support production of a wide variety of wipes.

Kornit Digital introduces Presto MAX for sustainable on-demand production (c) Kornit Digital
20.10.2021

Kornit Digital introduces Presto MAX for sustainable on-demand production

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Presto MAX is compatible with natural fabrics, synthetics, and blends, and includes advanced algorithms for smart autonomous calibration, to deliver high-quality results with short cycle times and minimal manual interruptions or defects. The system was devised for compatibility with the KornitX global fulfillment ecosystem to enable anywhere, anytime production, supporting a true distributed production model that fulfills nearer the end consumer, eliminating time and logistical waste from the experience while empowering brands to ensure quality and consistency across all systems and production sites.

Kornit Presto MAX provides the cornerstone of a smart, efficient, sustainable EcoFactory that empowers producers to cover and integrate more parts of the process, from design to finished product, to decrease their carbon footprint, use minimum manpower, and generate less waste. This means eliminating excessive time, labor, and shipping throughout the value chain, enabling proximity production to meet the accelerated demands of a web-driven global marketplace—revealing new sales channels and clever business models to grow the business long-term.

(c) Trevira GmbH
19.10.2021

Indorama at Index 2021 with Sustainability Portfolio

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

At the Index Show, the Hygiene Fibers Group launched CiCLO®, a textile technology which allows polyester and other synthetic materials to biodegrade like natural materials do in wastewater treatment plant sludge, sea water and landfill conditions, reducing synthetic microfiber pollution generated during washing, and minimizing plastic accumulation in landfills caused by discarded textiles.

In line with the company’s commitment to support customers with high performance products, while also reducing the impact on the environment, several of the  Hygiene Fibers brands, including Wellman International, Trevira GMBH and Auriga, have been working closely over the last 12 months with the IAM team and the CiCLO® technology. Developments have focused on PET and rPET staple fiber and filament sustainable solutions for applications where recycling is particularly challenging, such as Hygiene, Home Textiles and Automotive applications.

Strengthening the profile of biodegradable offerings within the Hygiene Fibers Group’s sustainability portfolio, Trevira introduced a new range of bicomponent fibres based on PLA and PBS (polybutylene succinate) at the Index show. Both biopolymers offer an exceptional technological opportunity in terms of environmental care and sustainability, while delivering optimum performance. Equally to PLA, PBS is recyclable and up to 100% biodegradable under industrial conditions.

Efforts towards supporting customers to achieve circular objectives are a priority within the Hygiene Fibers Group. This is reflected in the recycled fibers expertise deployed across the segment. Four Hygiene Fibers Group brands, IVL Asia, Auriga, Trevira and Wellman International offer an extensive range of 100% recycled, accredited PET fibers, across a multitude of fiber and nonwovens applications.

The development and evolution of sustainable technologies is central to activity across IVL’s Hygiene Fibers Group, with particular focus on sustainable polyolefin solutions. FiberVisions and ES-FIBERVISIONS, leading Polyolefin mono and bico fiber brands and sister company Avgol, have partnered with UK-based Polymateria to commercially harness the innovative ‘biotransformation’ technology pioneered by Polymateria. The patented technology alters the properties of polyolefins to make them biodegradable in a natural process.  Other polyolefin sustainable innovations within the Hygiene Fibers Group were featured at Index include biosurfactant and biocolourant developments being undertaken by the Avgol team with FiberVisons progressing sustainable design solutions, including lightweight, high performance, reduced carbon solutions.

Source:

Trevira GmbH, Indorama Ventures

18.10.2021

Avgol talks to Biotransformation Technology in Nonwovens at Index 2020

Avgol®, an Indorama Ventures company and manufacturer of high performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s IndexTM 20 exhibition.
Avgol will be discussing the global challenge of eliminating incineration, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

natureFIT™ is the newest innovation in the Avgol technology platform designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

The Index 20 expo will be held on 19 – 22nd October 2021 at Palexpo Geneva.

Avgol®, an Indorama Ventures company and manufacturer of high performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s IndexTM 20 exhibition.
Avgol will be discussing the global challenge of eliminating incineration, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

natureFIT™ is the newest innovation in the Avgol technology platform designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

The Index 20 expo will be held on 19 – 22nd October 2021 at Palexpo Geneva.

Source:

Avgol / PHD Marketing Ltd

(c) Officina+39 / Menabò Group srl
14.10.2021

Officina+39 presents its latest technologies and collaborations

Officina+39, an Italian sustainable chemical developer, attends Superstudio Più in Milan to show its technical progress and share its concrete contribution to a more Trustainable™ denim. Under the spotlight, among multiple innovations, the latest addition to the Officina+39 family: the brand-new NOVASCRAPER INDIGO.

NOVASCRAPER INDIGO, the new technology for classic aesthetics
NOVASCRAPER INDIGO allows to give a natural vintage look to denim garments through laser finishing, an actual innovative alternative to manual scraping. NOVASCRAPER INDIGO guarantees a natural effect with unparalleled quality and accuracy, requiring less manpower and less rejection rate when compared to manual scraping.

Officina+39, an Italian sustainable chemical developer, attends Superstudio Più in Milan to show its technical progress and share its concrete contribution to a more Trustainable™ denim. Under the spotlight, among multiple innovations, the latest addition to the Officina+39 family: the brand-new NOVASCRAPER INDIGO.

NOVASCRAPER INDIGO, the new technology for classic aesthetics
NOVASCRAPER INDIGO allows to give a natural vintage look to denim garments through laser finishing, an actual innovative alternative to manual scraping. NOVASCRAPER INDIGO guarantees a natural effect with unparalleled quality and accuracy, requiring less manpower and less rejection rate when compared to manual scraping.

The Sixth Sense: less water, more Trustainability
Officina+39 and Tejidos Royo joined forces to create a denim line that drastically reduces water consumption: this is “The Sixth Sense”, a project concretely inspired by the 2030 Agenda for Sustainable Development and specifically by its SDG6, calling to action to ensure access to water and sanitation for all. Officina+39 personally accepts this global challenge by contributing to the realization of “The Sixth Sense” with its AQUALESS MISSION. Featuring three cutting-edge laundry products for one innovative process, AQUALESS MISSION combines the application of REMOVER BC, AQUALESS AGED – a waterless compound to give denim abrasion effects –, and OZ-ONE POWDER – an advanced product to give garments a bleached yet eco-friendly treatment in a dry application, for a worn and distressed look. Compatible with conventional washing and treatment machinery, it allows for water consumption savings up to 75%.
Focused on driving sustainability in the textile industry, Tejidos Royo uses low-impact fibers and yarns as a raw material and the implementation of foam-dyeing technology with its Dry Indigo®, the first-ever technology to foam-dye denim with zero water use and no water discharge.

CircularKromia: a colorful path for preloved garments
At Officina+39 the word “waste” becomes synonymous with opportunity, a source to create something new, fostering true, Trustainable™ circularity. This is the background to the collaboration with Atelier Riforma, an innovative startup born in Turin (Italy) with a social vocation. Through the contribution of Officina+39’s RECYCROM™, it has been possible to obtain new pigment and dyestuff pulverizing discarded garments and pieces usually difficult to recover through tailoring transformation alone. The collection made it possible not to generate any waste, no new raw materials were required to create CircularKromia.

The Circle Book 2: the power of collaboration and circularity
A collective project gathering a total of ten companies with common goals focused on transparency and circularity in denim design, The Circle Book is now in its second edition that culminated in CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials.

Officina+39 opens its doors, with Lenzing and Meidea
In the evening of October 13, the recently inaugurated brand-new headquarters of Officina+39 in Biella opened their doors to welcome denim personalities, brands, designers and partners to show where Officina+39's innovative technologies are created, to network and celebrate while preparing new steps towards the design of a more circular and – of course – Trustainable™ fashion Industry.

Source:

Officina+39 / Menabò Group srl

13.10.2021

Ralph Lauren and Dow release manual for dyeing processes

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Conventional fabric dyeing processes require trillions of liters of water each year, generating roughly 20% of the world’s wastewater.1, 2 Pretreating fabric with ECOFAST™ Pure helps significantly reduce the amount of water, chemicals and energy needed to color cotton, by enabling up to 90% less process chemicals, 50% less water, 50% less dyes and 40% less energy without sacrificing color or quality.3

Ralph Lauren began integrating Color on Demand into its supply chain earlier this year and first launched product utilizing ECOFAST™ Pure as part of the Company’s Team USA collection for the Olympic & Paralympic Games Tokyo 2020. Designed to help address water scarcity and pollution caused by cotton dyeing, Color on Demand is a multi-phased system with a clear ambition to deliver over time the world’s first scalable zero wastewater cotton dyeing system. By 2025, the brand aims to use the Color on Demand platform to dye more than 80% of its solid cotton products.

 

1 Drew, Deborah and Genevieve Yehounme. “The Apparel Industry’s Environmental Impact in 6 Graphics.” World Resources Institute, July 5, 2017. https://www.wri.org/blog/2017/07/apparel-industrys-environmental-impact-6-graphics
2 Rep. A New Textiles Economy: Redesigning Fashion’s Future. Ellen MacArthur Foundation, Circular Fibres Initiative, 2017. https://ellenmacarthurfoundation.org/a-new-textiles-economy
3 A full third-party reviewed and validated life cycle assessment is available by request at www.dow.com/ecofast.

 

Source:

Dow / G&S Business Communications

From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability (c) DUARTE
Duarte - SS22 collection
13.10.2021

Duarte - SS22 collection

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind the collection is the superhero Tadao - Ana Duarte’s dog, an English Cocker Spaniel - which is the World Keeper fighting against the environmental issues mankind has generated. Like a protector of sustainability, it battles modern monsters as Smog Man, Fire Man, Deforestation Man and Wave man, who respectively represent the issues of air pollution, climate change, forest destruction and water overconsumption. A very simple, direct and engaging way of talking about hot topics and simple, direct solutions.

The collection is made of 20 outfits, mainly unisex apart from some of them typically feminine as the crop tops. Hints of bright red and mustard yellow are alternated with denim, grey and pale azure tones, blending in with the colorful prints. Accents of black - used in inserts or as piping - seem to emphasize the outline of the garments. The different textures of the materials create a sense of movement, further enhanced by the unique patterns. All the garments’ prints are exclusively designed by the designer, following each collection inspiration: this time, they recall urban landscapes and the appeal of big metropolis, with Tadao as protagonist in prints, patches and ankle socks.

Among the most representative Duarte outfits we find:

  • A matching sweater with trousers made of Newlife™, a yarn 100% made In Italy coming only from post- consumer, traceable plastic bottles.
  • A unisex oversized bomber is crafted from Newlife™, lined with precious 100% Bemberg™ by Asahi Kasei fabric by Gianni Crespi Foderami and matched with printed neoprene hoodie and shorts.
  • Long-panelled unisex coat and trousers made with ReLAST® denim by Candiani, a responsible textile featuring a premium recycled stretch yarn, ROICA™ by Asahi Kasei. The coat is lined with a fabric by Gianni Crespi Foderami in 100% Bemberg™ by Asahi Kasei, a new generation material made from the smart-tech transformation of cotton linter.
  • The same sustainable stretch yarn is implied in the responsible tulle by Iluna Group, and featured in a shorts and top women’s ensemble, paired with a neoprene printed bomber. The tulle is skillfully matched with 100% Tencel™ back in the loop fabric by Maeba International underneath it.

Ana Duarte is part of a new generation of designers with a new approach to sourcing and production: her research goes into different kind of business models to fit her responsible innovation and style needs at the same time. That’s why in her collection we can find amazing and unique combination of organic, recycled, Back in The Loop, innovative materials that are the right choice for the look&touch and the performance she’s looking for. The result is cool yet respecting people and the environment in full traceability thanks to certified and sometimes even circular solutions. Working with components from various sources and business models requires a certain expertise and a particular sensibility we find in Ana Duarte’s design solutions and in her responsible interpretation of streetwear.

Visionary building – with composite textiles by vombaur (c)vombaur
From the H-profile to the chamber structure – vombaur offers individually developed composite textiles with complex shapes
13.10.2021

Visionary building – with composite textiles by vombaur

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

Safe and durable solutions for challenging applications
The potential applications for lightweight components in the construction industry are as numerous as the project ideas of the planning and construction teams.
•    Ropes and tensioning elements made of carbon fibre reinforced plastic (CFRP)
•    Reinforcement of building structures made of concrete, steel, wood or other materials
•    Sustainable restructuring of constructions and urban districts for bridges and buildings
•    CFC slats as reinforcements in case of repairs
•    (Filled) GRP pipes made of seamless round woven tubes by vombaur as columns/pillars
•    CFRP sections as steel girder substitutes
•    Hollow profiles with individually designed cross-sections
•    Glass fibre reinforced connecting elements for glazing to minimise expansion differences between the connecting element and the glass
•    Individual light wells

Implementing visions – with composite textiles by vombaur
As your development partner, vombaur facilitates innovative composites projects for challenging applications. In innovative and safety-sensitive industries such as automotive and aviation, chemical and plant engineering.  The composites experts at vombaur develop, create samples of and manufacture woven tapes and seamless round or shaped woven textiles by vombaur – in collaboration with the customer's enterprise development teams and individually for the respective projects. This is how novel and unique lightweight components made of high-performance textiles are created for visionary lightweight construction projects.

"Fibre-reinforced composites are the ideal material for future-oriented construction projects," explains Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "Their outstanding technical properties and design possibilities open up new and fascinating perspectives for construction projects. From building construction to civil engineering, from bridge construction to interior design. As an experienced development partner for sophisticated lightweight components, we at vombaur contribute our seamless solutions to these kinds of future-oriented projects."

More information:
vombaur Composites carbon fibers
Source:

vombaur GmbH & Co. KG