From the Sector

Reset
3 results
04.09.2023

Kelheim Fibres and MagnoLab join forces

The viscose specialty fibre manufacturer Kelheim Fibres has entered into a collaboration with MagnoLab, an international network of companies in the textile industry based in the Biella region, Italy.

This partnership highlights the importance of collaboration between different companies to drive innovation and sustainability in the textile industry. Kelheim Fibres sees itself not only as a fibre supplier but also as an innovation partner for the entire industry. Through its Open Innovation approach, Kelheim Fibres fosters the exchange of ideas and knowledge to jointly develop sustainable solutions for the future.

Kelheim Fibres operates several pilot and technical facilities itself. The close collaboration with MagnoLab, which boasts an impressive array of state-of-the-art textile machinery, allows for even more efficient research and development.

The viscose specialty fibre manufacturer Kelheim Fibres has entered into a collaboration with MagnoLab, an international network of companies in the textile industry based in the Biella region, Italy.

This partnership highlights the importance of collaboration between different companies to drive innovation and sustainability in the textile industry. Kelheim Fibres sees itself not only as a fibre supplier but also as an innovation partner for the entire industry. Through its Open Innovation approach, Kelheim Fibres fosters the exchange of ideas and knowledge to jointly develop sustainable solutions for the future.

Kelheim Fibres operates several pilot and technical facilities itself. The close collaboration with MagnoLab, which boasts an impressive array of state-of-the-art textile machinery, allows for even more efficient research and development.

The cooperation allows for practical testing, accelerating the implementation of innovations. It also contributes to a closer networking of the European (and thus regional) value chain. Thanks to shorter transport routes within Europe, not only is the environmental impact reduced, but also the realization of innovations in Europe is facilitated.

Dr. Marina Crnoja-Cosic, Director New Business Development, Marketing & Communications at Kelheim Fibres, emphasizes the advantages of the collaboration: " Through close networking with the companies organized under MagnoLab, we can produce small quantities of samples and prototypes using various technologies. This enables us to develop solutions based on our specialty fibres that can be directly transferred to our partners' production facilities within the textile value chain."

Source:

Kelheim Fibres GmbH

Biella Yarn presents new Fall/Winter 24/25 collection (c) Südwolle Group
28.07.2023

Biella Yarn presents new Fall/Winter 24/25 collection

Biella Yarn’s new Fall/Winter 24/25 collection presents two collaborations. Both collaborations start with one common inspiration: with the clash of different cultures and the distant exotic markets. Rug making, fur-crafts and artisan hand work inspire patterns and textures which are translated into knitted fabrications and 3D designs.

MRC Knitwear Research Lab created these textures and patterns by using a small selection of very classic yarns and working them in special techniques to create rich textural fabrications. Each garment focuses on a special technique and combination of yarns and colours and show how versatile a single yarn can be.

Biella Yarn’s new Fall/Winter 24/25 collection presents two collaborations. Both collaborations start with one common inspiration: with the clash of different cultures and the distant exotic markets. Rug making, fur-crafts and artisan hand work inspire patterns and textures which are translated into knitted fabrications and 3D designs.

MRC Knitwear Research Lab created these textures and patterns by using a small selection of very classic yarns and working them in special techniques to create rich textural fabrications. Each garment focuses on a special technique and combination of yarns and colours and show how versatile a single yarn can be.

The garments were knitted mainly with Victoria Nm 2/30 (100% Merino wool extrafine, 19.5 μ, anti-shrinkage). Victoria Nm 2/30 was used in an array of different techniques and on different gauges - from 14gg ribs, that have a beautiful drape to more tactile fabrics such as 3-dimensional stitches on 12gg and heavily patterned inlay jacquards on the 14gg Shima Seiki SRY. Within these inlay jacquard’s BaltoroPro Nm 2/28 (70% Merino wool extrafine, 19.5 μ, anti-shrinkage 30% Polyester GRS High Bulk) was selected as an inlay yarn - a special wool blend which helps create bulky 3-dimensional fabrications that remain lightweight. The classic Brisbane Nm 2/60 (100% Merino wool Superfine, 17.5 μ, anti-shrinkage) and new boucle yarn Fluffy Nm 14 000 (81% Merino wool extrafine, 19.5 μ, anti-shrinkage, 19% Polyamide) were worked together in fine plush jacquards to give an effect of shaved patchwork furs.

The structures and patterns were transitioned into the world of 3D designs by Shima Seiki Italia. The design software APEXFiz®, developed by Shima Seiki, not only allows for shaping but also converts them into knitted patterns. By replacing physical samples, virtual samples reduce time costs, and materials that would otherwise be wasted. Yarnbank®, Shima Seiki's platform for yarn and spinning research, has been the primary source of Suedwolle Group's digitized yarns used in the 3D models.

Source:

Südwolle Group

(c) Marchi & Fildi Group
19.10.2021

Marchi & Fildi Group: Positive balance for 10 years of the photovoltaic installation

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

The Marchi & Fildi Group has always been committed to rationalising electric energy consumption with the aim of contributing towards an eco-sustainable development without compromising the rate of production and the ability to grow. In addition to producing its own electric energy, over the years, the company has also achieved an increasing number of Energy Efficiency Titles (TEE), otherwise known as white certificates. In 2021, 138 TEEs have been awarded as a result of such interventions as the introduction of LED lighting and the optimisation of the production processes which, while still as efficient as before, permit the company to reduce the electric energy consumption of the machinery.

*In the meter class for the range of 3kW to 4.5 kW, the average consumption for residential properties is the equivalent of 3,382 kWh (source: Arera Relazione annual state of services for the year 2020). The calculations are the results of an internal study conducted by the Marchi & Fildi Group.

Source:

Marchi & Fildi Group