From the Sector

Thanks to numerous new ramp-ups and the favorable portfolio of vehicle models supplied, Autoneum grew organically by 2.5% in a declining market. Adjusted for currency effects, Group revenue in Swiss francs amounted to CHF 2 297.4 million, 0.7% higher compared to the previous year.

For the second consecutive year, fewer vehicles were manufactured worldwide in 2019 than in the prior year. In particular, the persistently weak global economy and ongoing trade disputes have had an impact on vehicle demand. With only about 89 million vehicles produced, the market shrank by almost –6% compared to 2018. Despite this negative trend, Autoneum achieved an organic revenue growth of 2.5% through numerous production ramp-ups and a favorable mix of vehicle models supplied. Revenue consolidated in Swiss francs rose by 0.7% from CHF 2 281.5 million to CHF 2 297.4 million.

Revenue growth in North America, Asia and SAMEA region significantly above market The Business Groups North America, Asia and SAMEA (South America, Middle East and Africa) not only outperformed the negative market trend in each case, but also reported higher revenues compared to the previous year. In Europe only, the drop in automobile production caused a decline in revenue of the corresponding Business Group by –5.6% in local currencies. Business Group North America improved its revenue by 7.2% on a currency-adjusted basis, primarily driven by various production ramp-ups of German and Japanese vehicle manufacturers. Despite considerably fewer vehicles being produced in Asia, the Business Group increased its revenue in local currencies by 8.1% thanks to high-volume and new programs of European and Asian automobile manufacturers. Business Group SAMEA continued its growth course. Against the market slump in this region, revenue in local currencies and adjusted for inflation rose by 32.7%. This was mainly due to high-volume export programs in Turkey and South Africa as well as much higher production volumes compared to the previous year in the key SAMEA market of Brazil.

• Series order for a total of 500 units
• First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

“With with our landing gear we help to shape this very new, promising application of manned, autonomous civil aviation. This involvement also demonstrates our wide range of services. From engineering, to prototype manufacture, to serial production with our own materials – all of our competences along the entire value chain made a contribution to the project ,” emphasizes Dr. Andreas Erber, Head of the Aerospace segment of the Composites – Fibers & Materials business unit at SGL Carbon.

The landing gear was developed in close collaboration between customer experts and specialists from SGL Carbon. The carbon fibers for the component are produced at the SGL Carbon plant in Muir of Ord, Scotland. The final part is being manufactured at the SGL Carbon site in Innkreis, Austria.

Intertextile Shanghai Home Textiles – Autumn Edition will return from 24 – 26 August 2020 at the National Exhibition and Convention Center (Shanghai), organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). Stepping into its 26th edition, the trade fair will provide exhibitors the perfect opportunity to introduce new products and expand their distribution networks, as well as serving as a source of information and inspiration for professionals in every aspect of the industry.
 
Celebrating its 25th anniversary last August, the Autumn Edition of Intertextile attracted 1,147 exhibitors from 27 countries & regions, as well as 35,390 trade buyers from 117 countries & regions (2018: 104), reflecting the increasing internationalism of Messe Frankfurt’s textile fairs in China, and the growing opportunities for international suppliers to meet a wide range of buyers in Shanghai. The trade fair’s capacity to attract large and diverse crowds has reinforced its status as the leading business platform for the home textile industry in the Asia Pacific region.
 
In the next edition, a large collection of quality Chinese companies, as well as premier overseas brands will once again present the entire spectrum of home and contract textile products including:

• Textile editors
• Whole Home Products
• Windows & Upholstery
• Bedding, Bath, Kitchen & Table
• Carpets & Rugs
• Sun-Protection
• Wallcovering
• Digital Print & Technics
• Fibers, Yarns & Chemicals
• Textile Designs

Opportunities abound in China’s home textiles market
 
“The upcoming Autumn Edition of Intertextile is set to offer suppliers and buyers the best platform to capture new business opportunities, especially as we continue to focus on bringing together more key players from the textiles, interiors, architecture and hospitality sectors in China and internationally,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.
 
“Over the years, Intertextile has been evolving from a traditional trade fair to an immersive and interactive experience that inspires and engages attendees. Today, the fair is more than a business platform; it also delivers state-of-the-art home trends, valuable networking opportunities, as well as innovative and strategic solutions for brand development through a series of fringe programme events,” Ms Wen further explained.
 
As one of the selected exhibitors featured in the Talks & Tours series at the 2019 fair, Mr Thomas Luys, Sales Manager of LIBECO-LAGAE: “We had quite a diverse range of visitors, including an increase in e-commerce buyers, but also more traditional upholstery fabrics buyers. Our booth was also part of the Talks & Tours, so it was important to tell our story to a diverse range of visitors on this tour.”
 
 
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

Kornit’s Avalanche Poly Pro system “offers the best possible quality” for consumers demanding custom-decorated polyester and poly-blend apparel
January 8, 2020, Englewood, New Jersey – Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced that GEAR for Sports, a division of Hanesbrands Inc., has installed a Kornit Avalanche Poly Pro system to supplement previously-implemented Kornit Digital direct-to-garment (DTG) print systems within the company’s Lenexa, Kansas production facility.

GEAR for Sports sells its products under some of the most powerful brands in sportswear, including Under Armour®, Champion®, Alternative Apparel, Hanes, and Gear for Sports®. This compelling portfolio of brands allows GEAR to provide a longstanding history of quality graphics and innovative apparel design, giving customers a single resource for all their sportswear needs. Installing Avalanche Poly Pro, which integrates Kornit’s proprietary NeoPoly print technology with the brand’s production strategy, will enable them to custom-print poly rich garments on demand.

GEAR for Sports has implemented three Kornit DTG print systems in the last two years. Having established a process for delivering imprinted cotton garments on demand, and further answering the voice of its customers, the brand decided to expand these capabilities to polyester and poly-blend pieces.

“We’ve been inviting key customers to our facility to demonstrate what the Poly Pro equipment can do, as we expand our digital printing capability throughout our facility,” said Cindy Olivarez, Director of Operations—Customs and Logistics with GEAR for Sports. “Digital printing is an ever-growing business and is key to our business initiatives. Having the ability to print polyester t-shirts one unit at a time will allow us to gain consumers who want poly rich garments, and Kornit’s Poly Pro system offers the best possible quality to allow GEAR for Sports to expand our direct-to-garment business.”

• First glass fiber based leaf spring project in series by Ford worldwide
• From development to serial production

Since midyear, SGL Carbon has produced longitudinal leaf springs made of glass fiber-based composite for Ford Transit rear axles in series. The springs are used in combination with the Transit Skeleton chassis. Thus, they are applied where high payloads play an important role, for example in caravanning models or specific commercial vehicle variants of the Transit. In comparison to conventional leaf springs, the innovative composite leaf spring weighs about 50 percent less while offering increased security standards. The serial application is supported by a one-to-one compatibility with standard steel springs.

• Kiian Digital will present the latest update of “Bellagio” reactive inks
• The series promises unexpected performance and efficiency

JK Group will attend Heimtextil (7 – 10 January 2020 Frankfurt am Main) – the global event for interior textiles trends – through Kiian Digital brand, revealing the last update of Digistar Bellagio reactive ink series alongside the complete product portfolio designed for Textile Printing.

Bellagio series will benefit from a custom-made waveform for MS's printing machines. “Our R&D Teams have done a long fine-tuning on the formula, working side by side with MS Team to setup a bespoke waveform, reaching top printing performance” explains Marco Girola, JK & MS Marketing and Communication Manager “this is the outcome of the synergic job among the teams, making the difference” ends Girola.

The custom-made waveform is a keynote of Bellagio series which offers an unmatched result in terms of reliability, lower wear of printheads and quality of prints outcome.  At the booth visitors will attend live-demos of Bellagio printing by a MS JP4 EVO 3200 printing machine.

Next to Digistar Bellagio series there will be Digistar Bravo.

Disperse ink for polyester direct printing which has recorded great success since its debut. Even Bravo series shows a customized waveform developed for MS's printing machines. Bravo is Kiian Digital’s flagship for printing home textile fabrics thanks to the absolute level of its general fastness: washing, light and rubbing; as well as the wide color range. JK Group’s experts will explain to visitors the uniqueness and benefits of the customized waveform on quality and production efficiency. Lastly, a space dedicated to Digistar K-Choice, textile direct pigment series, cannot miss.

For the Textile Industry, making every production’s step more sustainable has become a must and it has always been a priority commitment for JK Group. Our experts will not fail to deepen topics about textile standards and compliance with the worldwide most restrictive regulations, helping to make the choice of a textile sustainable production chain concrete and aware.

Recently, upgrades and retrofits were made available for Oerlikon Barmag ACW-series winders, with which the benefits of the WINGS concept become tangibly close for operators of POY spinning systems equipped with ACW technology. Worldwide, thousands of winders could take advantage of this system upgrade.

In addition to savings in terms of energy, waste and HR, the benefits of the WINGS concept above all include the consistently high yarn quality, making WINGS yarn a winner in further processing. Particularly with regards to its dyeing properties, the yarn is considerably superior to products manufactured using conventional winder technology.

Yarn producers can now also achieve these typical WINGS properties with ACW winders – with a corresponding system upgrade. The ACW WINGS conversion components and ACW upgrades for draw units can be installed as plug-in units in virtually no time at all, hence minimizing system downtimes. Analog to WINGS, the new ACW WINGS draw unit is more compact and also guides the yarn using rollers instead of yarn guides. This minimizes friction for the yarn and the angles of deflection remain the same, which in turn optimizes the yarn tension on all packages.

Already being used in China
The first expansion phase with 96 positions is already successfully operating at Chinese polyester yarn manufacturer Zhejiang Rongsheng. “We achieved excellent yarn values after just four days. The yarns are of AA quality for a full package rate of 98% and a yarn break rate of 0.5 per ton”, summarizes Xu Yongming, Plant Manager at Rongsheng, talking about the upgrade package. “This has allowed us to once again become one of the top manufacturers with our ACW yarns.” A second expansion phase with 88 further positions will follow at the end of 2019.

The conversion package is also particularly interesting as a result of its fast ROI (return-on-investment) of less than one year. ACW WINGS is available for all ACW-type POY / HOY winders for polyester, polyamide 6 and polyamide 6.6.

"Fulfillment Hub” presentation will feature collaborations with major brands, thought leadership sessions
Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, has announced the details of its presence at PRINTING United 2019, taking place in Dallas, Texas, October 23-25, 2019.

PRINTING United brings the North American public debut of Kornit’s Konnect software, a cloud software analytics platform that provides users a single comprehensive user interface to monitor and manage their productivity. This empowers customers to receive real-time data about their operations, prioritize, assess costs, troubleshoot, and set goals from the convenience of their laptop, tablet, or smartphone.

Artisan craft, experience and high eco-technological specialization: the great tradition of fabrics for shirts which styles the future.

Search for quality, the ability to interpret elegance and a product inspired by tradition, though always trendy: these are the distinctive traits which define the vocation of Canclini 1925, a point of reference worldwide for shirt fabric manufacturing. This expertise is implemented through dynamic creativity and 100% Made in Italy artisan  craft. These are the foundations which make the history and capability of Canclini 1925 unique, as standard bearer for everlasting style.

All this results from an authentic family tradition which, for three generations, has been the driving force of the company, shaping each collection. This passion is at the service of tireless search in terms of style and technology which underlies the whole Canclini 1925 innovative approach. The goal is to offer, through its fabrics, an inimitable experience, “creating wellbeing” and emotion through touch alone, respecting the environment and humans.

Founded in 1925, Canclini has always been a company able to combine extraordinary creativity and product care, established as a silk factory in the Como region. This tradition was renewed in the 1960s with the shift to the cotton sector, aiming more and more at customer service, developing a partnership and trust relation. Working with Canclini 1925 means reaching into the tradition of a family which has always been passionate about its work, dynamic, creative and focused on continuous innovation.

These are distinctive and qualifying elements in the Canclini 1925 approach. An approach which, in line with the research and development pathway on which the company has always invested substantial resources, also involves considerable attention the topic of environmental and social accountability. This commitment is confirmed by numerous and prestigious certifications in the company portfolio, starting from the careful selection of raw materials to its social commitment. More specifically, Canclini 1925 has been awarded the GOTS (Global Organic Textile Standard), SUPIMA COTTON (the Pima “Gossypium Barbadense” cotton, classified as Extra-long Staple) certifications, following the Standard 100 by OECO-TEX®, BCI (Better Cotton Initiative) and GRS (Global Recycle Standard). A comprehensive range of tools which, combined with its in-house know-how and expertise capital, enhances the portfolio of Canclini 1925 branded innovations.

This accountability approach also encompasses the social area with the association “Un sorriso in più” (“One extra smile”). Founded and managed by the company, it is a non-profit organisation engaged in projects which include assistance in nursing homes to elderly persons without family ties, as well as in the support to children living difficult and disadvantaged family situations, focusing its activity on “human life quality”. The uniqueness generated by this meeting between tradition and innovation is the driving force behind corporate research, as well as the truly distinctive reason for its style and technology development. The high-performance looms and technologies used make the company strong and flexible enough for contemporary market requirements. The trademark passion of the Canclini family completes the picture within which the company operates, true to an approach which is at the same time artisan and high-tech, a point of reference in Italy and worldwide.

Thanks to its substantial manufacturing capacity, Canclini today is present on all of the most influential shirt markets worldwide, and – with its new Blue 1925 line - also in the denim world. In this way the company has succeeded in positioning itself among major players in textile manufacturing, authentically Italian because of its farsighted  business vision, care for details and production flexibility. It is the approach which – over the years - has allowed the group to take over important enterprises in the sector, for example Hausmann-Moos and Profilo Tessile, Maglificio Mida and Grandi & Rubinelli.
According to Simone Canclini, CEO of Canclini 1925: “What characterises the Canclini 1925 spirit is first and foremost genuine passion driven by our inspiring principles: quality, style and service. These elements have allowed us to become and remain a point of reference worldwide, to rediscover the everyday – basic and exciting – emotion of choosing a special shirt”.

With the announcement of the eligible vehicle models, the World Car Awards 2020 kickedoff today at the IAA Motor Show in Frankfurt, Germany. This year again, the majority of contenders is equipped with lightweight components for acoustic and thermal management from Autoneum. The world’s leading automobile industry awards will be presented at the New York Motor Show in the spring of 2020.

A total of 46 new vehicle models have passed the initial screening and are now contenders for trophies in the categories “World Car of the Year”, “World Luxury Car”, “World Performance Car”, “World Urban Car” and “World Car Design of the Year”, including five new fully-electric models alone. Whether it’s a lightweight underbody, a noise-absorbing carpet system or a heat-reducing engine encapsulation – most of the eligible vehicles benefit from Autoneum’s innovation leadership in thermal and acoustic management. Autoneum’s expertise extends to new forms of mobility such as electric vehicles: Also thanks to numerous Autoneum components, Jaguar’s fully-electric SUV “I-PACE” impressed the jurors for the World Car Awards 2019, which was the first model ever to be named “World Car of the Year”, “World Car Design of the Year” and “World Green Car” at the same time.

On the occasion of today’s eligibility announcement, Autoneum CEO Martin Hirzel said: “Once again, the contenders are testimony to our innovation leadership. The World Car Awards also confirm our forward-looking approach: Nominated e-models feature Autoneum components as well. Welcoming our industry’s transformation early on, we today supply environmentally sustainable, lightweight components for most electric models available worldwide.”

Gerry Malloy, President of the World Car Awards Association, added: “As a market leader, Autoneum is the ideal partner for us. Our shared commitment to innovation was a decisive factor in forming a partnership back in 2014. Nowadays, this is a crucial aspect for manufacturers and suppliers who wish to remain successful in times of industrial and technological change.”

The World Car Awards, which have been presented annually since 2004, are the world’s leading nd most widely recognized automotive industry awards. A jury comprising of more than 80 international automotive journalists selects winners in five categories. The winners of the 2020 World Car Awards will be announced in April next year at the New York Motor Show.