From the Sector

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.

• Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

“With two of the recent orders, the customers had already installed the FlexoCleanerBrush in other locations. One of them reported as much as a 30 percent production capacity increase, thanks to the  installation,” said Lee Simmonds, Regional Sales Manager at Baldwin. “Both customers have experienced insufficient results with their original traversing cloth cleaning systems, which will now be removed and replaced with the full-width, stand-alone, automated FlexoCleanerBrush technology from Baldwin.”

Improving sustainability is one of the key drivers for investments in the corrugated printing industry. The FlexoCleanerBrush dramatically cuts water waste by cleaning plates more efficiently. In a recent independent study that was conducted to validate the capacity of the automated system, the FlexoCleanerBrush could fully clean and dry all printing plates in less than four minutes and pick hickeys in seconds.

Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plateracking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

International technology Group ANDRITZ has received an order from Pureko Sp. z o.o. to supply a needlepunch line for their plant in Myszków, Poland. The line will process recycling fibers from garment waste for the production of technical felts dedicated to furniture and geotextile applications. The final products will have fabric weights ranging from 300 to 500 gsm, and the production capacity will be up to 750 kg/h. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ scope of supply includes a complete neXline needlepunch eXcelle line – from web forming to needling – as well as engineering and ANDRITZ’s recently launched scanning gauge.

This is the second ANDRITZ line to be supplied to Pureko, thus demonstrating the strong partnership between both companies. Three years ago, Pureko invested in a new, modern plant supplied by ANDRITZ Asselin-Thibeau to produce fluffy nonwovens used in the furniture, textile, and clothing industries. The new line will enable Pureko to continue its ongoing growth.

Founded in 2009, Pureko is one of the most important producers of nonwovens in Poland. The company’s nonwoven products are mainly used for wadding; they are free of chemicals, do not involve any health hazards, and are hypoallergenic. Pureko’s products carry top certificates such as INTERTEK, FIRA, OEKO-TEX, and the National Institute of Hygiene.

With the pollen season starting, new independent test results by the German external laboratory BMA-Labor have shown Purissimo’s™ effectiveness against pollen, making it an all-in-one solution for reducing allergens.

Devan’s allergen control technology, known as Purissimo™, has been found effective against allergens from pollen. The technology had already been proven to significantly reduce the amount of allergens from house dust mites and pets (cats & dogs).

“Allergens are small protein molecules, which can cause allergic reactions and asthma. All allergy sufferers are different when it comes to their sensitivity to allergens”, says Sofie Depluverez, PhD researcher at Devan. “However, few people are only allergic to a single allergen – and the effects of multiple allergens can add up. The key to reducing and even eliminating symptoms is to reduce your exposure to the allergens themselves.”

Allergy threshold
When people move into a house or bring in a new dog, the number of allergens starts to rise. In the beginning there are little to none, so the allergy threshold causing symptoms is far from being reached. Nobody is suffering any reaction at this stage.

“As time goes by, the various allergens start to build up inside the house, certainly when ventilation is limited”, Depluverez continues. “As the allergen concentration increases (especially in combination with seasonal allergens such as pollen), the allergy threshold may be reached if no allergen reduction measures are in place.”

Purissimo™
Purissimo™ is a natural allergen control technology that significantly reduces allergens from pet dander, dust mites and pollen in textiles throughout the home. The technology is based on encapsulated probiotics, which are naturally occurring microorganisms similar in kind to those you can find in probiotic yogurt, tempeh, kombucha.

Inactive probiotics (spores) are encapsulated and integrated onto the textiles. Friction opens the microcapsules and releases the spores. The spores absorb humidity and self-activate. They are transformed into probiotic bacteria that start to consume the allergens.

“As the probiotics consume the allergens, exposure is gradually reduced to below threshold levels”, Depluverez adds. “Therefore, individuals with respiratory allergies will be exposed to fewer ‘attacks’ and perceive a better well-being.”

• Partner to Enable Sustainable Microbe- and Odor-Resistant Textiles
• Huntsman Now Delivers Complete End-to-End System for Protection Effects

SINGAPORE – Huntsman Textile Effects and Sciessent have entered into a strategic partnership to bring revolutionary antimicrobial and odor-control solutions to textile mills and brands worldwide. As consumers around the world begin paying more attention to health and hygiene, Huntsman Textile Effects and Sciessent will cooperate to help mills and brands deliver active wear, outerwear, home textiles and other products with long-lasting protection against microbial growth and odor. Huntsman Textile Effects will also become the exclusive distribution partner of Sciessent’s Agion® Antimicrobial*, Lava XL® anti-odor solution, and dual-action Active XL®.

“Both Huntsman Textile Effects and Sciessent share a deep commitment to innovation, environmental sustainability and customer service. As partners, our joint goal is to offer the highest level of protection for textiles so that they stay fresher for longer,” said Rohit Aggarwal, President of Huntsman Textile Effects. “Huntsman Textile Effects now has one of the industry’s most complete end-to-end systems for high-performance protection effects, with a full range of innovative and sustainable protection and comfort technologies from pre-treatment to coloration and finishing.”

“Our presence in the global textile and apparel market has been rapidly expanding based on the strength of our solution set and reputation for delivering an exceptional customer experience,” said Sciessent CEO Paul C. Ford. “Through this partnership, we are both extending our reach to manufacturers and enhancing our offerings by coupling them with Huntsman Textile Effects’ broad range of innovative and sustainable protection technologies. It is a great opportunity for manufacturers to differentiate their products through the combined strength of our brands.”

Sciessent is recognized for the proven effectiveness and safety of its antimicrobial and anti-odor technologies throughout the global textile and apparel industry.

Sciessent Agion® Antimicrobial is the industry-leading antimicrobial solution. Designed with smart-release technology, it delivers long-lasting protection by releasing its active antimicrobial agents only when needed. It can be built-in or applied via padding, exhaust or package yarn to any textile alongside other functional finishes, dyes, inks and pre-treatments. Durable up to 100 home washes, Agion® is also customizable to meet brands’ performance and cost goals. Agion® Antimicrobial has been used on FDA-approved medical devices.*

Sciessent Lava XL® is a next-generation non-bioactive odor-control solution, ideal for sportwear and athleisure wear. While other odor-control technologies capture odors and release them during laundering, Lava XL®’s triple action technology utilizes zeolite minerals with a large surface area to capture, absorb and degrade odors as they pass through the fabric.

Sciessent Agion Active XL® combines the advanced dual technologies of Agion® Antimicrobial and Lava XL® to deliver outstanding odor protection. The antimicrobial fights odor-causing bacteria on the garment, while the odor-control solution captures odor generated by sweat on the skin. The result is that garments smell fresher for longer and sustain a high level of performance for more wears.

The Sciessent solutions are easily integrated into the finishing process and can be combined with a range of other finishes, including Huntsman Textile Effects’ durable water repellents and comfort systems to cost-effectively produce high-performance textile products that are safe and sustainable.

Huntsman Textile Effects and Sciessent both champion environmentally responsible products that help the textile industry meet its regulatory obligations and the expectations of the world’s most exacting brands and consumers. The Agion®, Lava XL® and Active XL® products are all bluesign® approved and listed on the Zero Discharge of Hazardous Chemicals (ZDHC) Foundation ZDHC Gateway, complying with ZDHC Level 3 requirements.

*The Agion® Antimicrobial is presently registered by the United States Environmental Protection Agency as a preservative and bacteriostatic agent for use in treated articles under 40 CFR 152.25a. The information presented herein is not intended to support or endorse public health claims for treated articles. The Agion® Antimicrobial is also used in medical devices under the Food and Drug Administration; those medical device claims are based on safety and efficacy testing and are limited to those approved by FDA.

Swedish commission dyeing company 7H Färgeri is looking to propel itself to the forefront of sustainable fabric production with the installation of the first industrial scale imogo Dye-Max spray dyeing line.
Currently under construction, the line will be delivered in the first week of March to the 7H plant close to the Swedish city of Borås. It will have a full working width of 1.8 metres with an operating speed of up to 50 metres for the reactive dyeing of cellulosic fibre-based fabrics. In addition, it will be capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing the company with unbeatable flexibility in production.

A proven Mini-Max laboratory unit for pre-determining application volumes and colour matching will also be delivered as part of the contract.

With the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems, the DyeMax has gained considerable attention since the concept was outlined and a prototype machine constructed in 2019.

Pilot scale trials have subsequently been carried out with many well-known international textile companies and their brand partners.
The application unit of the Dye-Max consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo Pro Speed valve that controls the volume to be applied.

Control and precision
“We are achieving an extremely low liquor ratio of around 0.5-1 litres per kilo of fabric and we fully control the pickup, applying precisely what is required to the specific fabric,” says imogo founding partner Per Stenflo. “Compared to traditional padders there is no contamination of the dyebath or dilution of the dye liquor to worry about.
Fast changeovers with virtually no waste together with a high production speed enable a high productivity and unmatched production flexibility. The system is also equipped with an exhaust system and droplet separator to ensure that the environment around the unit is safe and free from particles.

The imogo Mini-Max meanwhile frees up valuable production time by avoiding wasteful pre-runs. The user simply sets the recipe with the Mini-Max and transfers the parameters to the Dye-Max recipe database for the system to be fully production ready.

7H Färgeri was founded in 1935 and has established itself as the Nordic region’s most complete dyeing and processing plant, specialising in technical and functional textiles for the automotive and soft furnishings sectors, as well as functional and protective clothing.

The family-owned business is now run by brothers Johan and Peter Engelmann.
“We are pleased to be pioneering a sustainable first for the dyeing industry,” said Johan Engelmann. “Our goal is to offer the market products and services with the highest quality in the most climate-smart and sustainable way, and imogo’s spray technology will give us the opportunity to offer innovative new services and products to both existing and new customers. It will be a very exciting journey.”

World Congress on Textile Coating
On February 12th Per Stenflo will make a presentation entitled ‘Transforming Textile Dyeing’ during the online World Congress on Textile Coating which is held over four days, between February 11th and 19th.

• Combined HCl acid and steam generation enables significant energy savings and increased cost efficiency

SGL Carbon delivered a Hydrochloric Acid (HCl) synthesis unit with integrated steam generation to Travancore-Cochin Chemicals Ltd. (TCCL), a major producer in the chlor alkali business in South India. End of January, TCCL officially inaugurated its plant in Kochi in India’s Kerala state. Since then, the unit has already been ramped up at the customer’s site to full capacity.

The synthesis unit uses the efficient membrane wall technology and has a capacity of 60 tons of HCl per day. As an additional benefit, this innovative design enables the recovery of waste heat generated in the synthesis unit from the reaction of Hydrogen & Chlorine to produce up to 33 tons of steam at the high pressure of 10 bar every day. This steam can be used elsewhere in the chlor alkali plant, for example when concentrating caustic to flakes. As a result, the energy efficiency of TCCL’s plant goes up substantially since a huge portion of their steam demand can be covered by SGL’s unit. Thereby this helps to save costs as well as reduces CO2 emissions by more than 1.500 tons per year potentially.

The HCl synthesis has been completely engineered and produced at SGL’s production site in Pune, India. Scope of supply also included civil modification services at the customer site on a turnkey basis.

 “Our innovative combined HCl synthesis and steam production units offer a great business value to our customers in the growing Indian chemical market. Together with our proven technical and engineering competence on a global scale we can help our customers to enhance their energy efficiency as the example of TCCL shows”, comments Suneet Sangam, Sales Manager at SGL Carbon India.

“By engineering and producing our units also at SGL’s production site in India, we further strengthen our position as a global process solution provider for corrosive applications leveraging our extensive expertise from our worldwide network. Realizing such ambitious projects in these challenging times of Covid restrictions shows how capable our global team is.“ says Christoph Koch, Director Sales EMEIA at SGL Carbon.

• Elleti Group partners with Wiser Wash for Europe and the Mediterranean area, with Portugal being the only exception, for a more sustainable fashion.
• The enterprise based in Verona joins Wiser Wash’s international network and adopts the innovative patented process for the treatment of denim that has the market’s lowest environmental impact.

Tradition and innovation: this combination has always characterized Elleti Group, a historic company based in San Bonifacio and an important point of reference for the denim industry and beyond. Now it is also the exclusive partner of Wiser Wash for Europe and the Mediterranean area, with Portugal being the only exception. Specializing in laundry, dyeing and garment making services, the company is led by the steady hand and ambitious vision of Luigi Lovato, who was recently recognized by Rivet50 as one of 2020's fifty most influential people in the denim ecosystem. The partnership with Wiser Wash is a fitting continuation of Elleti Group's tireless pursuit of excellence, development of cutting-edge solutions and commitment to environmental sustainability, which has always projected the proud Made in Italy tradition towards the future.

With the introduction of Wiser Wash's technology, Elleti Group has significantly reduced the amount of resources used in traditional garment treatment. This patented washing method eliminates the use of pumice stone and all harmful chemicals, while drastically reducing water consumption throughout the process. In addition, the efficiency of the process lowers chemical and mechanical stress on fabric fibers as compared to traditional treatment, guaranteeing greater garment robustness and longevity.

This important milestone is the latest and more relevant result of a commitment that has been integral to Elleti Group's approach since its foundation. This was already present in the Earthkeepers collection – a line of low environmental impact treatments which marked the culmination of research and experimentation journey, aimed at developing an authentic look whilst looking out for the safeguard of the environment, its resources and its people. Record of the company's evolution is kept in the "Stadium", an impressive archive of Elleti Group collections. There displayed are some 15,000 garments, direct evidence of the stylistic and technological developments that have made Elleti Group an international benchmark for creativity and high quality.

"Nothing is more important to us than satisfying our clients' needs. We put all our expertise and experience at the service of their creative ideas," said Luigi Lovato, Founder and CEO of Elleti Group. "The partnership with Wiser Wash is definitely another reason to be proud, and it will set our bar even higher in guaranteeing quality, authenticity and an ever-increasing respect for the environment and our employees."

Archroma, a global leader in specialty chemicals towards sustainable solutions, has been recently ranked number 1 in the “industrial chemicals” list published by the Institute of Public & Environmental Affairs (IPE) for driving transparency in their supply chain.

Archroma also entered the Top 50 of companies in IPE’s Green Supply Chain CITI Evaluation, at the 47th position. The evaluation dynamically assesses brands on the environmental management of their supply chains in China.

With a wide array of products used every day, everywhere, the company is committed to operate along the principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. The Archroma team is therefore committed to sourcing safe and sustainable raw materials and intermediates from like-minded partners.

Heike van de Kerkhof, CEO of Archroma, recently delivered a message at the IPE 2020 Green Supply Chain Forum online, and commented: “As industry leader, we have the responsibility to keep on addressing the climate challenge, and to do everything we can together to reduce our impact on the environment. This is where the approach of the Institute of Public & Environmental Affairs supports us. They encourage us to challenge our suppliers in terms of safety, health and environment, and to go even beyond our own strict policies and processes.”

In a roundtable discussion during the recent Innovate Textiles & Apparel (ITA) textile machinery exhibition, imogo Founding Partner Per Stenflo and representatives from a number of like-minded European companies discussed the opportunities for new spray application technologies for the dyeing and finishing sector.

These technologies can achieve tremendous savings for manufacturers compared to traditional water-intensive processes it was explained at the event, held online from October 15-30th.

Pioneer
imogo – one of the latest companies to join TMAS, the Swedish Textile Machinery Association – is one of the key pioneers in this area with its Dye-Max system. Dye-Max spray dyeing technology can slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. This is due to the extremely low liquor ratio of 0.3-0.8 litres per kilo of fabric and at the same time, considerably fewer auxiliary chemicals are required to start with.

Obstacles
Such technologies, however, face a number of obstacles to adoption and during the ITA discussion it was agreed that 2020 has not provided the ideal climate for adventurous investors. “The textile industry is quite conservative and is definitely in survival mode at the moment and it is not the time to be a visionary,” said Stenflo. “Day to day business is about staying alive – that’s the reality for many of our customers.” Nevertheless, all of the panellists agreed that sustainable production will remain top of the agenda for the textile industry in the longer term and spray technologies for dyeing and finishing processes will be a part of it.

“Any investment in something new is a risk of course, and we have to be able to explain and convince manufacturers that there’s a good return on investment, not only in respect of sustainability, but in terms of making good business sense,” said Stenflo. “Here we could use the help of the brands of course, in putting pressure on their suppliers to be more sustainable. Governments also have a role to play, in providing incentives for producers to move in the sustainable direction. Sustainability alone will never cut it, there has to be a business case, or it won’t happen.”

Marketing
The marketing of sustainable new fibers is comparatively easy for the brands compared to explaining the difficult textile processes and the chemistries involved in fabric and garment production, he added.

“These fibers, however, currently go through all the same dirty processes that we need to get away from, so it must happen,” he said. “In developing our technologies, it has been important for us to avoid disrupting existing supply chains, stick with using off-the-shelf chemistries and dyes, and involve the dye manufacturers who are an essential part in how operations are driven today. “In fact, collaboration across the entire textile supply chain – from the brands right back to the new technology developers – is essential in moving the sustainability agenda forward.

Business models
“We are also looking into new business models in terms of how to reduce or lower the thresholds for investment and minimise the risk for the manufacturers who are looking to be the innovators,” he concluded. Also taking part in the ITA roundtable discussion were Simon Kew (Alchemie Technology, UK), Christian Schumacher (StepChange Innovations, Germany) Tobias Schurr (Weko, Germany), Rainer Tüxen (RotaSpray, Germany) and Felmke Zijilstra (DyeCoo, Netherlands).

European innovations
“It’s fantastic that all of this innovation is taking place in Europe based on established know-how and forward thinking,” said TMAS Secretary General Therese Premler-Andersson.

“Spray application technologies are a perfect illustration of how new digital technologies can lead to more sustainable production, in this case by replacing water-intensive processes with the highly precise and controlled application of dyes and chemistries as vapour.
“There was a major project by the Swedish research organisation Mistra Future Fashion recently, involving many brand and academic institute partners. The project’s Fiber Bible 1 and 2 reports conclude that it’s very difficult to make assumptions that one fiber is better than another, because it’s so much about how fabrics and garments are being produced from them. The study also found that 55% of the chemicals used in a garment comes from the dyeing. This is where a number of TMAS companies can make a difference.
“An organic or recycled cotton t-shirt is not automatically more sustainable than a conventional cotton t-shirt, or even one made from synthetics – the alternative fibers are a good start but you have to consider the entire life cycle of a garment, and that includes the smart technologies in textiles production.
“TMAS members – backed by Swedish brands and advanced research institutes – are playing an active part in pushing forward new concepts that will work, and I have no doubt that digitalisation now goes hand in hand with sustainability for the textile industry’s future.”