From the Sector

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.

The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.

The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.

The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.

With the new line now fully operational, the savings it is providing have yet to be fully calculated.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO₂ footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

With the growing demand among brands and consumers for plastic-free materials and ingredient transparency, VEOCEL™, the flagship specialty nonwovens brand of Lenzing Group, showcased LENZING™ Lyocell Dry fiber at Hygienix 2023. LENZING™ Lyocell Dry fiber which is not classified as “plastic” according to EU SUPD, meets the growing interest for plastic-free nonwoven products across the industry and among consumers. Additionally, along with being an environment-friendly solution, the fiber delivers high-performance dryness and comfort which makes it the optimum fiber choice for absorbent hygiene applications.

Comprised of mostly fossil-based materials, absorbent hygiene products are an essential part of many consumers’ daily lives. With heightened concerns towards environmental impact, the product segment has been undergoing a change caused by shifting consumer preferences, increased consciousness and concerns towards plastic waste, and technology advancement. LENZING™ Lyocell Dry fiber has embraced these changes without compromising on quality or performance.

LENZING™ Lyocell Dry is a cellulosic environment-friendly wood-based alternative to fossil-based fibers. Besides offering great performance features such as liquid management, dryness, gentle-on-the-skin comfort, softness, and quality, LENZING™ Lyocell Dry helps to meet the needs of customers who are aiming to produce plastic-free applications or end products that do not harm the planet without compromising on performance or comfort.

Featuring Lenzing’s unique Dry technology, LENZING™ Lyocell Dry’s hydrophobic characteristics and liquid-controlling properties make it the ideal fiber for absorbent hygiene products. Its high-performing hydrophobicity makes it the optimal choice for a wide range of applications, including baby diapers, feminine care and personal hygiene products as well as adult incontinence products.

The fiber has consistently been tested by Lenzing as the softest* fiber among cellulosic fibers in both dry and wet stages. LENZING™ Lyocell Dry will enable brands and manufacturers to deliver quality hygiene products that provide a high level of comfort, softness, and dryness.

*Lenzing AG softness panel test

Carbios was one of eight beneficiaries selected to present the progress of its industrial project in the presence of the President of the French Republic on the occasion of the two-
year anniversary of the launch of the France 2030 investment plan. Carbios is receiving €42.5 million in public funding (€30 million from the State as part of France 2030 and €12.5 million from the Grand-Est Region) for the construction of the plant for the enzymatic depolymerization of PET. Carbios is an emblematic example of the France 2030 initiative to support innovative projects that contribute to reindustrialization through innovation in strategic sectors, such as recycling. This plant, located in Longlaville in the Grand-Est Region, will be Carbios' first industrial site. Construction has just begun.

Carbios' technology enables PET circularity and provides an alternative raw material to virgin fossil-based monomers, allowing PET producers, waste management companies, public entities, and brands to have an efficient solution to meet regulatory requirements and fulfill their own sustainability commitments. The plant will have a processing capacity of 50,000 tons of post-consumer PET waste per year (equivalent to 2 billion colored PET bottles, 2.5 billion PET trays, or 300 million T-shirts) and will address waste with little or no value such as colored PET bottles, food trays, and textiles. The plant will create 150 direct and indirect jobs in the region. In October 2023, Carbios obtained the building permit in 10 months (the average duration in France is 17 months) and the site operating permit, allowing construction to begin. The plant is currently under construction in Longlaville in the Grand-Est Region.

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

The yarns in the ACTIVEYARN® collection embody the company’s six strategic pillars of innovation – sustainability, circularity, traceability, design, performance and technology – drivers of the entire process of design and production.

Jasmin GOTS Nm 2/48 (100% wool 19,5 μ X-CARE) is a natural, renewable and biodegradable yarn with GOTS certification that meets the company’s demand for sustainability. X-CARE, the innovative treatment by Suedwolle Group, uses eco-friendly and chlorine-free substances that make wool environmentally friendly and suitable for easy-care quality.

Tirano Betaspun® RWS FSC (41,5% wool 17,2 μ TEC RWS certified, 41,5% LENZING™Lyocell 1,4 dtex 17% polyamide filament 22 dtex GRS certified) is a fully traceable high performance yarn, suitable for sportswear and activewear.

OTW® Midway GRS Nm 2/60 (60% wool 23,5 μ X-CARE, 40% polyamide 3,3 dtex GRS certified) comes from the recycling of pre-consumer polyamide and thus is a perfect example of circular production. Suitable for weaving, it combines the added performance that comes from our OTW® patented technology applied to a high durability blend, ideal for active garments.

Wallaby Betaspun® Nm 1/60 (87,5% wool 18,4 μ TEC, 12,5% polyamide filament 22 dtex) is the result of application of latest-generation Betaspun® technology to a natural fibre like wool, allowing production of fine yarns with extra strength and abrasion resistance, ideal for seamless and wrap knitting.

Banda TEC X-Compact Nm 2/47 (100% wool 17,2 μ TEC) is a 100% natural, renewable and biodegradable yarn benefitting from the innovative X-Compact, permitting production of particularly linear yarns ideal for clean design and fabrics appropriate for today’s fashions.

Caprera GRS Nm 1/60 (45% wool 19,3 μ Non mulesed X-CARE 55% COOLMAX® EcoMade polyester 2,2 dtex GRS certified) increases the performance of the wool-based non mulesed fibre through combination with COOLMAX® EcoMade polyester. This is a material coming from recycling of post-consumer PET bottles, dyeable at low temperatures, that aids evaporation of moisture from the skin to maintain stable body temperature, enhancing the comfort of activewear and urban garments.

Lectra will now directly manage the production of its cutting equipment manufactured in China, primarily dedicated to its Asian customers. The Suzhou site, located to the west of Shanghai, will thus benefit from the standards of operational excellence already implemented by Lectra at its two other plants in Bordeaux-Cestas, France, and Tolland, USA.

Lectra's teams have over 35 years’ experience in the Asia-Pacific region, which in 2022 generated 25% of the Group's revenues.

Since the acquisition of its competitor, Gerber Technology, in 2021, Lectra had been relying on a plant belonging to Dutch group VDL Groep (VDL), to manufacture Gerber-brand multi-ply cutters and spreaders.

For its industrial activities, Lectra aimed to adopt the same standards of operational excellence in China as those currently in effect at its Bordeaux-Cestas and Tolland sites. The Group therefore created a new subsidiary, Suzhou Lectra Equipment Manufacturing Co. Ltd., to take over from subcontractor VDL as of December 1, 2023.

Following the takeover of in-house production at the Tolland site in October 2022, the creation of the Suzhou Lectra Equipment Manufacturing Co. Ltd. subsidiary marks a new milestone in the deployment of Lectra's industrial excellence strategy on a global scale. The Group intends to give priority to regional industrial production, which is beneficial to the local economy.

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

Robert has also held senior positions as President of the Austrian Fiber Institute, President and Board Member of CIRFS – the European Man-made Fibres Association, and Chairman of the ReHubs Business Council for Euratex, which is the voice of the European Apparel and Textile Industry.

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

The production of carbon fibres is highly complex. In the current state of the art, however, the manufacturing process is only monitored manually by semi-skilled workers. However, even minimal fibre damage during production leads to a reduction in the quality of the carbon fibre. In extreme cases, it can also lead to plant fires. To ensure production quality, the production speed is currently limited to a maximum of 15 m/min. In fact, the production speed of the systems could be higher. The sensor-based online monitoring of Carbo-Screen makes it possible to increase the production speed to 30 m/min in the medium term. As a result of the increased production volume per system, the specific production costs of the carbon fibre are reduced, which can result in lower prices.

A reduced sales price would make it possible to use carbon fibres and their composite materials even more widely in traditional markets such as aerospace technology and wind energy, as well as for mass production in the automotive industry.

The CarboScreen online monitoring system is currently being developed for industrial use. It is to be validated at an industrial plant in 2024. CarboScreen GmbH was founded as part of EXIST funding and offers AI-supported sensor systems for carbon fibre production. The sensor technology continuously monitors the fibre throughout the entire production process. Deviations are detected automatically.

The winners of the AVK Innovation Award are honoured annually by the AVK Industrievereinigung Verstärkte Kunststoffe. Companies, institutes and their partners are honoured in three categories: products and applications, processes and procedures, and research and science.

HeiQ introduces a 100% biobased and long-lasting cosmetic finishing technology for textiles to the market. The newest addition to the HeiQ portfolio harnesses the power of active probiotics and selected prebiotics to enhance the skin microbiome, turning the human’s largest organ into the best-looking one.

HeiQ Skin Care is a synbiotic textile finish aimed at providing a balanced microbiome for glowing skin, even after repeated use and washing of textiles. Unlike conventional products, HeiQ Skin Care utilizes slow-release prebiotics and probiotics seamlessly integrated into a biobased textile matrix, enriching the skin's microbiome diversity, and offering long-lasting cosmetic benefits.

The synergistic combination of prebiotics and probiotics, known as synbiotics, delivers a soothing cosmetic skin treatment while relaxing, working, or sleeping. Probiotics not only restore and improve the skin's natural balance but also enhance its self-repair capabilities. Synbiotics promote skin renewal, rebalancing, and improved appearance, reducing the signs of aging and establishing a favorable environment for the skin's natural repair mechanisms.

A second skin that takes care of the first
The skin, the largest organ in human body, is home to a diverse community of microorganisms called the skin microbiome. It plays a crucial role in maintaining good skin condition, acting as a protective barrier against harmful agents. However, various factors, such as hormones, diet, smoking, environmental exposures, and excessive UV radiation, can disrupt its balance, leading to skin conditions like rashes, acne, psoriasis, rosacea, skin irritation, redness, eczema, and odor. Maintaining a balanced skin microbiome is essential for preserving skin integrity.

HeiQ Skin Care is suitable for all textile fibers, both natural and synthetic, and can be applied to all textile items that come in direct contact with the skin. This versatility makes it an ideal choice for daily use- at work, during sports, leisure activities, or as bedding items like bed sheets and pillows.

Intensive wear trials conducted during the development stage have proven the consistent release of synbiotics (prebiotics and probiotics) onto the skin, creating conditions to foster a well-balanced microbiome.

On 23-24 November, Recover™, Evlox and Jeanologia will showcase their new recycled denim capsule collection, REICONICS, at Denim Première Vision in Milan.

The collection is the result of a collaborative project between the three companies, combining expertise from each specialist business to improve circularity in the denim industry, from fiber to finish.

It aims to inspire and bring value to the industry by creating truly circular products through a process that implements eco-design, transparency, process measurement, traceability, and scalability.

Made from Recover™ recycled cotton fiber and Spanish cotton, the REICONICS collection is GRS certified and is a tribute to the classic denim fabrics that have been successful in past decades.

It includes a range of premium denim fabrics developed by Evlox, and a total of 14 final garments that will be exhibited at Premiere Vision Denim. Each piece in the collection displays a variety of finishes generated using technology by Jeanologia, reducing water and energy consumption, and eliminating damaging emissions and discharge.

Just one jacket in the REICONICS collection, using 32% Recover™ recycled fiber and Jeanologia finishing technology, saves up to 240 liters of water; compared to a jacket made with virgin cotton and treated with traditional finishing technique.