From the Sector

•    New, sustainable, ready-to-use solutions for plastic auto parts to support China’s electric vehicle boom
•    Stronger, softer nylon polyamide fibers plus fast processing for clothes, carpets & industrial applications
•    AddWorks blends lower total cost of ownership & reduce production complexity while enhancing performance

Muttenz, May 3, 2018 – Clariant, a world leader in specialty chemicals, introduced new additive solutions for plastics materials at Chinaplas 2018.

“Our innovations focus on higher performance at better convenience for a sustainable future,” says Stephan Lynen, Head of Clariant BU Additives. “At Chinaplas 2018 we demonstrated our technical and market capabilities around the theme of e-mobility. The immense changes in mobility call for lighter, safer and smarter vehicles. We offer new additive solutions, such as AddWorks, and technical capabilities to respond to this demand. We are accompanying this with a series of investments such as new production facilities in China.”

Clariant’s new AddWorks solutions – AddWorksATR 146, AddWorks LXR 568 and AddWorks TFB 117 – are specifically aimed at improving performance and efficiency of plastics materials for compounders, polymer and fiber producers in China’s major plastics manufacturing segments. All three solutions are part of the globally available portfolio.

The full AddWorks portfolio consists of differentiated market-specific synergistic additive blends that streamline production processes and create value for customers while enhancing performance. Each solution is customized to specific market needs, underlined by broader considerations such as emission reduction, and less energy and resource usage.

Sustainability and performance for the world’s largest auto market
To support the significant investment in electric vehicles in China, Clariant launched two additive innovations that improve the lifetime of lightweight automotive parts and under-the-hood applications and reduce VOC emissions in an easy to use single solution.

AddWorks ATR 146 is a new low dosage, sulfur-free heat and light stabilizer for filled polypropylene (TPO) compounds used in interior applications. Its exceptional heat and light stability and long term color retention offers the automotive industry unmatched performance. It shows no surface cracking after 700 hours at 150°C, which enables dashboards, instrument panels, door panels and pillars to maintain their aesthetics longer than with traditional stabilizers. It also contributes to reducing blooming and VOC emissions, supporting the common effort to make automotive interiors healthier and odorless.

AddWorks LXR 568 is a high performance processing stabilizer that helps to prevent plastic resins, especially polyolefins, from degradation at high processing temperatures. For the automotive industry, this reduces the tendency of injection molded polypropylene interior car parts to turn brittle during heat exposure, enabling them to maintain a defect-free surface. It also has low migration and low fogging that support healthier in-cab environments.

AddWorks LXR 568 combines outstanding color and melt flow protection with good resistance to hydrolysis and high thermal stability. This makes it ideal for interior and under-the-hood powertrains and wider application areas such as packaging films. It is available in free-flowing pills and micro-pills which are easy and convenient to use.

Softer, stronger polyamide fibers for clothes, carpets and industrial applications
Within the next three years, China is expected to account for 40% of the world’s nylon production and more than 30% of the nylon resin consumed globally[1]. The new AddWorks TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min.

Martin P. J. John, Head of BL Performance Additives at Clariant, comments: “AddWorks solutions are an ideal fit with China’s priority of achieving more sustainable production. They save time and reduce complexity along the production process, with easy to use formats that reduce health risk and chemical waste. Our new state-of-the-art production facility in Zhenjiang, China, which opens later this year, is dedicated to the manufacturing of AddWorks to deliver innovative solutions tailored to the needs of the market. Made for China in China.

In addition to AddWorks, Clariant presented Exolit® OP 1400, a highly stable non-halogenated flame retardant enhancing safety during the charging process. It also provides outstanding thermal stability for under the hood applications. Exolit OP 1400 has been awarded the Clariant EcoTain® label for outstanding sustainability and performance.  

Clariant also introduced two ranges of performance waxes that smoothen the production of automotive plastics for under the hood applications, Licowax® and Licocare® RBW. The recently launched Licocare RBW is a series of multi-purpose additives based on crude rice bran wax. They offer better shaping flexibility, better mechanical properties and enhanced surface finish, which results in a reduced rejection rate and a more effective dosage.

Wielsbeke, Belgium – February 26, 2018 – Beaulieu Fibres International, the leading European polyolefin fibre producer, is once again the proud recipient of a “Distinguished Supplier” European Supplier Award from Yanfeng Automotive Interiors (YFAI). It is the second year in succession that the global leader in automotive interiors has recognised the significant expertise and support provided by Beaulieu Fibres International.

The very close cooperation between the two companies in 2017 enabled YFAI to successfully develop its latest generation of lightweight door panels, helping to further reduce weight. The technical team at Beaulieu Fibres International worked closely with YFAI’s development team to achieve this important step forward for the automotive industry.

Beaulieu Fibres International was presented with the award at YFAI’s annual European Supplier Award ceremony held this year on February 7th at its European headquarters in Neuss, Germany.

A total of 15 suppliers providing plastics, resins, chemicals, foams, trim and metal components received the European Supplier Award in various categories in recognition of their outstanding performance in 2017. Suppliers are rated on the factors of quality, cost, customer satisfaction, development, technology and innovation, and service.

Paris, February 20, 2018 – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce its partnership with Dual through the signing of a global agreement covering the Korean automotive supplier’s fabric seating and airbag businesses.

Backed by world-class research and development, Dual strives to meet evolving customer needs by offering innovative new automotive interior materials and advanced safety textiles. The supplier’s automotive trim and airbag divisions serve Hyundai-Kia Automotive Group, the fourth largest automaker in the world. Currently undergoing rapid expansion, Hyundai-Kia is counting on Dual to increase its manufacturing capabilities in the high-growth regions where the group operates, including China, Eastern Europe, Turkey and South America.

A key feature of the global agreement is Lectra’s commitment to help Dual optimize its manufacturing processes with the aim of improving its cost structure. Lectra’s most advanced technologies—Vector® for vehicle seating and FocusQuantum® for airbags—and unique expertise in cutting room processes are crucial to helping Dual reach its operational excellence objectives.

The agreement designates Lectra as sole supplier for high-ply cutting equipment and services for Dual’s seating and interiors business, and laser cutting equipment and services for the company’s airbag cushion business at six plants located in Korea and China.
For its operations in Korea and China, Dual will gain access to the full array of expertise, customer support and field services that Lectra provides worldwide. Lectra’s complete customer support structure enables maximum uptime through remote diagnostics and predictive maintenance.

“Dual will benefit most from this agreement by containing costs in the cutting room,” remarks Ong Jae-Yeol, Fabric and Seat BU Executive Managing Director, Dual. “This is precisely where Lectra’s expertise can help us gain a competitive advantage.”
“We are pleased to enter into this global partnership with Dual, to support them—not only with our best-in-class cutting technology, but also with Lectra’s expertise in cutting processes,” states Javier Garcia, Senior VP Automotive Sales, Lectra. “Our unique know-how contributes to Dual’s pursuit of operational excellence—the source of sustainable competitive advantage for car seat cover and airbag cushion suppliers.”

Geleen, NL - Royal DSM, a global science-based company active in health, nutrition and materials, today announces that DSM-Niaga and ECOR are to start a research collaboration. The collaboration will focus on developing fully recyclable and healthier alternatives for particleboard, MDF and other panel materials which can be used in industries such as building & construction, furniture, interior decoration and displays. ECOR offers technology for circular materials and has an R&D facility in Venlo, the Netherlands.

Looking at the piles of waste generated by the interior and construction industries, design for recycling is inevitable. Both ECOR and DSM-Niaga have been redesigning products to be fully recyclable back into the same product. The irreversible combination of materials and ingredients used in most products made with MDF and particleboard is the biggest challenge for technically and economically feasible recycling. Both ECOR and DSM-Niaga want to outsmart complexity for healthier and recyclable products.

Eric Logtens, CEO ECOR-NOBLE Environmental Benelux commented: “The concept that traditional materials like tabletops are up for incineration or disposal after their life cycle will be eliminated. Combining ECOR and Niaga® technologies, the core materials of products can be made from recycled content, and can be fully recycled after use.”

Chris Reutelingsperger, Chief Technology Officer DSM-Niaga commented: “By combining ECOR and Niaga, waste becomes a treasure. I can’t stop thinking of all the possibilities, and I hope that designers will approach us for ideas to make beautiful products and challenge us to broaden the possibilities of these technologies.”

In recent months ECOR and DSM-Niaga explored a collaboration by combining each other’s technologies. The technology of ECOR can make materials from natural fibers, with water, pressure and heat alone. DSM-Niaga manufactures products by using a reversible adhesive. This adhesive enables easy decoupling of different material layers, for full recovery and high value recycling. Both technologies were combined and tested in diverse product applications, like furniture and displays. The preliminary results led to further investigating of applications and will lead to new fully recyclable products.

Both technologies combined offer a fully recyclable alternative to all products made from MDF and particleboard, without compromising on material safety, quality, and recyclability. The joint objective of both companies is to offer manufacturing processes to local companies, solving local waste problems and boosting local economies on a global scale.

• Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”

At Heimtextil, which is to be held in Frankfurt from 9 to 12 January 2018, Trevira GmbH will be represented together with some important Trevira CS clients in Hall 4.2 at a 1,305 m2 booth.
The core of this joint booth will be a Trevira exhibition. Participating clients will present their latest Trevira CS collections for home textiles and commercially used textiles at individual stands around this core exhibit. The joint stand is located in close proximity to the new exhibition “Interior. Architecture. Hospitality. EXPO” of Messe Frankfurt.
“We are delighted to be able to make a significant contribution to the new thematic focus of Hall 4.2 with our trade fair concept for next year. It enables us to offer a platform to our clients allowing them to reach important decision-makers. In

addition, visitors to the trade fair will appreciate being able to find such a large number of Trevira CS novelties and collections in a one-stop-shop,” says Anke Vollenbröker, Head of Marketing at Trevira GmbH.
Trevira CEO Klaus Holz is pleased that the idea of a joint stand has been so well received by their clients. “The high level of demand shows that our concept of a comprehensive partnership with our clients pays off. Our long-standing clients appreciate that we not only offer them high quality and sustainably produced fibres and yarns, but that we also support them with our technical expertise and in marketing their Trevira fabrics.”

The following clients will be represented with a large selection of their beautiful and modern Trevira CS fabrics at the joint booth in January: Baumann Dekor Ges.m.b.H., Engelbert E. Stieger AG, FIDIVI Tessitura Vergnano S.p.A., Jenny Fabrics AG, Johan van den Acker Textielfabriek B.V., Mattes & Ammann GmbH & Co. KG, Pugi R.G. S.R.L., Spandauer Velours GmbH & Co. KG, SR Webatex GmbH / Getzner Textil AG, Swisstulle AG, Tessitura Mario Ghioldi & C. srl, Torcitura Fibre Sintetiche S.p.A., Torcitura Lei Tsu S.r.l., Vlnap a.s. / Wagenfelder Spinning Group, Wintex S.r.l., Mersem Teksil San. Ve Tic. Ltd. Sti, Teksko Kadife Kumas San. Ve Tic. A.S.

 Hall 4.1 Booth F13, 9-12 May, Frankfurt-am-Main, Germany Wielsbeke, Belgium – May 8, 2017 – Beaulieu Fibres International, the leading European polyolefin fibre producer, demonstrates its strengths as a “Technology Innovator” at Techtextil 2017, promising more fibre innovations to address market demand in segments such as automotive, flooring and geotextiles.
Beaulieu Fibres International’s recent Supplier Excellence for Technological Innovation Award from Yanfeng Automotive Interiors, is just one example of its commitment to developing innovative new products in close cooperation with customers to enable them to bring more environmentally-friendly, lighter and better performing products to market.
To support this, Techtextil visitors will hear first-hand of Beaulieu Fibres International’s investment in new fibre technology on an industrial scale in Belgium. The EUR 15 million investment will be commissioned in November 2017. It is part of an ongoing programme to extend fibre production to meet future challenges and customer needs.

At Hall 4.1 Booth F13, Techtextil visitors can get insights on upcoming products and explore Beaulieu Fibres International’s extensive and diversified portfolio of Mono, Round and Trilobal fibres, plus BICO-fibres. Donald De Deygere, Sales and Marketing Manager Fibres Industrial, Beaulieu Fibres International, comments: “Being the European leader for polyolefin staple fibres, it is also our commitment to stay ahead as Technology Innovator. Our innovation strategy is the cornerstone of our activities and various awards have proven this success. We are proud to announce new industrial investments in both Belgium and Italy amounting to more than EUR 80 million over 2016-2018.”