National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement welcoming the Biden administration’s launch of new database and waiver process for government contract solicitations made under the Buy American Act.
You can read the statement here.
NCTO
(c) Kai-Chieh Kuo
Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.
Minimally invasive endovascular aortic repair (EVAR) with textile stent-graft systems is nowadays a clinically established therapy procedure for the treatment of abdominal aortic aneurysms (AAA) – pathological bulges of the aorta. Due to the thick profile of the folded stent graft systems, there is currently a high risk of injuring narrowed or highly angulated access vessels from the inside during implantation. Stent graft systems with smaller profiles could provide an improvement, which could overcome complicated access routes through a lower bending stiffness. One possible approach for reducing the system profiles is the use of thin-walled tubular woven fabrics made of ultrafine multifilament yarns (≤20 dtex) as graft material.
Up to now, it has not been possible to process the fine yarns with the required high thread density (>200 threads/cm) and the available weaving technology in order to guarantee sufficient tightness against blood.
In his master's thesis, Kai-Chieh Kuo made high-density tubular weaving of ultra-fine filament yarns possible for the first time by means of suitable modifications to a shuttle loom as well as adaptations in the weaving preparation. In particular, he developed a new innovative reed technology that reduces warp thread friction during the shedding process and thus improves the process stability of the dense tube weaving process of fine yarns.
With the help of the process modification, it was then possible to produce high-density, thin-walled tubular woven fabrics, which were positively evaluated with regard to their suitability for a stent graft. Above all the potential of these tubular fabrics lies in their extremely thin-walled fabric profile, which seals well against blood. By using these new types of tubular fabrics as graft material for stent grafts, the system profile of the folded stent graft system can be reduced without having to compromise the blood tightness of the implant. The technology developed by Mr Kuo is not only applicable to stent graft systems, but also offers great possibilities for use in all other endovascular implants such as trans catheter heart valves, covered stents and small-lumen vascular prostheses.
ITA
C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.
Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.
NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.
NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.
C.L.A.S.S.
(c) JEC Group
JEC Forum DACH will open its doors from November 23 – 24, 2021, the promise of a two-days gathering around business meetings and conferences. JEC Forum DACH will offer actors of the composites profession in the region the opportunity to exchange and learn about current and future developments of the industry through a rich program of conferences, the JEC Composites Startup Booster, and the AVK Innovation Awards. It also includes pre-arranged Business Meetings between sponsors and attendees as well as sponsors’ workshops.
CONFERENCES, KEYNOTES, AND MARKET OVERVIEW
JEC Forum DACH will feature cutting-edge live conferences with experts from the industry as well as
exclusive keynotes organized by the AVK.
MEETINGS PROGRAM
In order to help the sponsors to save time and establish connections with real-interest business partners, JEC Group has developed a Business Meetings program: an efficient facilitator to connect precise needs to corresponding offers. These one-to-one meetings will be held on the sponsors’ booths during the two days of the event.
FEATURED SPONSORS’ WORKSHOPS
JEC Forum DACH will host 9 sponsors’ workshops during the two days: CMS SPA, Elantas Europe S.r.l., Kisling AG, Kroenert GmbH & Co KG, Maschinenfabrik Herbert MEYER GmbH, Netzsch Process Intelligence GmbH and Schwarzpunkt (part of Helvoet Group), Saertex GmbH & Co KG and SVT, Trima Spol Sro and Walter Mäder AG will present their know-how and technology during 30 minutes’ presentations in front of the attendees as well as in livestreaming.
FOSTERING ENTREPRENEURSHIP WITH THE JEC COMPOSITES STARTUP BOOSTER
JEC Composites Startup Booster is the leading startup competition in the world of composites.
It enables the community to find and assess innovations with a potential impact on their respective industries. The competition will be held at JEC Forum DACH for the first time with the pitches’ session on November 23rd at 2:15pm followed by the Awards ceremony at 6:15 pm.
The finalists are: ANYBRID (Germany), CARBON CLEANUP (Austria), CARBON-DRIVE (Germany), FIBRECOAT (Germany), and TOUCH SENSITY (France).
CELEBRATING INNOVATION WITH THE AVK INNOVATION AWARDS
This year at JEC Forum DACH, JEC Group and AVK will co-organize the AVK Innovation Award.
One of the goals of the AVK Innovation Awards is to give prominence to the innovations and the companies/institutions behind them, thus publicizing their performance throughout the industry. These awards will celebrate innovations in fiber-reinforced plastics (FRP) / composites during the Awards ceremony on Tuesday 23rd, at 6:15pm.
Full program and speakers list here.
JEC Group
(c) Mahlo
At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.
Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.
The culture and integrity with which business is conducted in the family-owned company were among the reasons why Mahlo America Inc. CEO Alan Lavore has also been with Mahlo for 25 years. "I just love working with all the great people at Mahlo." Lavore joined Mahlo in 1996 as a territory sales manager and took over as CEO in 2005. During this time, he drove the company's expansion from a textile specialist to a supplier for various production sectors such as film, paper, coating and converting or nonwovens.
Mahlo GmbH + Co. KG
(c) Abu Dhabi Government Media Office
ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).
The world-scale expansion confirms both partners’ commitment to the growth of Borouge and to support chemical production, and advanced manufacturing and industry in Ruwais, a key pillar of Abu Dhabi and the UAE’s technology, innovation and industrial development strategy. Borouge produces crucial industrial raw materials, which are exported to customers globally and used by local companies, boosting local industrial supply chains and enhancing In-Country Value.
Borouge 4 will capitalize on the projected growth in customer demand for polyolefins, driven by their use in manufactured products in the Middle East, Africa and Asia. The facility will also enable the next phase of growth at the Ruwais Industrial Complex by supplying feedstock to the TA’ZIZ Industrial Chemicals Zone.
Borouge 4 will have an industry-leading focus on sustainability leveraging the capabilities of both shareholders. The facility will utilize Borealis’ proprietary Borstar technology, to produce a product portfolio focused on durable applications for energy, infrastructure, advanced packaging, and agriculture sectors. This unique technology, in combination with hexene co-monomer, will enable the production of advanced packaging grades with up to 50% recycled polyethylene content.
Subject to an in-depth study, a Carbon Capture unit that would reduce CO2 emissions by 80% could also be operational in time for Borouge 4’s start-up. The facility is also designed to capitalize on ADNOC’s recent initiatives on clean energy, decarbonizing its power supply through access to Abu Dhabi’s clean power sources. These initiatives are aligned with the UAE Net Zero by 2050 Strategic Initiative.
The first Borouge facility, producing 450,000 tons of polyethylene per annum was commissioned in 2001. Borouge 2 and Borouge 3 took capacity to 2 million tons and 4.5 million tons of polyethylene and polypropylene per annum in 2010 and 2014 respectively. Borouge 4 will boost the company’s annual polyolefin production to 6.4 million tons, making Borouge one of the world’s largest single-site polyolefin facilities.
The new Borouge 4 facility will comprise:
Borealis
In 2021, Berto Industria Tessile embarked on a series of journeys through the denim supply chain, touching both B2B and B2C worlds.
The first journey of this adventure, aimed at discovering and publicizing the world of indigo and, began by talking about the collaboration with the turkish garment maker blue matters creating a green collection to be proposed to the world's top brands, continuing with “su mirura project” in the second chapter.
This project has its objective in supports, with a ready on stock fabrics, (which at this time of difficult availability of product becomes extremely relevant), young emerging talents in the world of fashion that, in our industry, both for problems related to minimum order quantities and for problems related to financial commitments of startups, would having difficulty in the raw materials research.
In this third chapter of the personal voyage into the world of denim, Berto Industria Tessile talks about two realities that are not only made in Italy, but also made in veneto, for a zero km circularity supports.
Two brands that are part of two different segments of the indigo world of b2c, one operating in the world of clothing and one in the creation of fashion accessories, but who have a common denominator between them, the use of 100% in their collections of denim fabric Berto.*
* See attached document for more information.
Berto Industria Tessile / EFFE-BI
(c) ITM/TU Dresden
Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.
Dr.-Ing. Martin Hengstermann wurde mit dem mit 5.000 EUR dotierten Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 für seine am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden erarbeiteten Dissertation „Entwicklung von Hybridgarnen aus recycelten Carbonfasern und Polyamid 6-Fasern für thermoplastische Verbundbauteile mit hohem Leistungsvermögen“ geehrt.
Gegenstand der Dissertation ist die Entwicklung und Umsetzung von neuartigen Hybridgarnen aus recycelten Carbonfasern (rCF) und Polyamid (PA) 6-Fasern für thermoplastische Verbundbauteile. Diese Hybridgarne können die hervorragenden mechanischen Eigenschaften der rCF im Gegensatz zu bisherigen Lösungen in hohem Maße ausnutzen. Bedingt durch deren spezielle Fasereigenschaften (insbesondere hohe Querkraftempfindlichkeit, Sprödigkeit und fehlende Kräuselung) wurde dafür die Prozesskette der konventionellen Stapelfasergarnherstellung, bestehend aus Krempel, Strecke und Flyer, umfangreich analysiert und technologisch-konstruktiv weiterentwickelt, wodurch erstmalig eine schonende und gleichmäßige Herstellung der Hybridgarne ermöglicht werden konnte.
Technische Universität Dresden
Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)
(c) VDMA
The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.
With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.
Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.
The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.
New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.
In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."
VDMA e. V.
Alchemie Technology, an innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.
While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.
Fabric dyeing is the most polluting part of fashion and activewear manufacturing, involving industrial scale dye baths and huge amounts of dye chemicals, steam, electrical power, and consequent high CO2 emissions. Repeated washing of the dyed fabric, required to remove dye residue, is responsible for 20% of the world’s wastewater pollution and excess dye is discharged into waterways, affecting the health of some of the world’s poorest communities. In more regulated areas, water pollution is reduced through reliance on energy intensive water treatment plants.
However, an environmental step change can be achieved by adopting new digital technology that can dye fabrics with an 85% reduction in energy consumption and a dramatic 95% reduction of the 1.3 trillion litres of water currently used by the industry each year.
For example, dyeing one polyester shirt using current methods generates 4.5 litres of wastewater and produces 0.17 Kg of CO2, compared to low energy digital technology, which uses less than 0.2 litres of water and reduces carbon emissions to 0.03 Kg. Multiply these numbers by the billions of garments dyed each year and the scale of the environmental problem, if nothing changes, is clear to see. Equally, the amount by which the textile industry can improve its carbon footprint is dramatic and can be done quickly if action is taken now.
Alchemie Technology Ltd
Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.
Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.
Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.
Composites Evolution has a family of specialist prepregs for various applications, including Evopreg® EPC epoxy component prepregs which are a range of pre-impregnated fabrics suitable for moulding into high-performance, lightweight, structural components; Evopreg® EPT epoxy tooling prepregs which have been designed to help composite tooling manufacturers improve the flexibility and efficiency of their tooling manufacturing processes; and Evopreg® PFC fire-retardant prepregs a 100% bio-derived alternative to phenolics for applications where fire performance is a critical requirement.
Evopreg® ampliTex™ combines Composite Evolution’s high-performance Evopreg® epoxy resin systems with Bcomp’s award-winning ampliTex™ flax reinforcements, to deliver a family of materials which offer outstanding performance for component applications.
Composites Evolution launched their new range of Evopreg® PA Thermoplastic Tapes at Advanced Engineering; these are manufactured from polyamide-6 (PA6) polymer with unidirectional carbon fibre and are suitable for automated tape laying, winding and compression moulding into high-performance, lightweight components.
Composites Evolution Ltd
(c) CHT
The Beitlich Family Foundation, owner of the CHT Group, has appointed Elke Katz as an additional member of the Foundation's Board of Directors, which includes the function of Supervisory Board, on 1 September 2021. Elke Katz is currently CEO of ratioform Verpackungen GmbH, a company of the Haniel Group, based in Munich.
She has extensive, cross-industry experience in strategic and operational corporate management at companies such as BMW and Telefonica. She holds a degree in business engineering and has extensive know-how in customer experience management, digital business and business development.
Johan de Ruiter, Chairman of the Board of the Beitlich Family Foundation: "We aligned ourselves with the UN's 17 Sustainable Development Goals several years ago and defined sustainability, digitalisation and diversity as important strategic components for the CHT Group. We are therefore delighted to have gained a proven digitisation expert for our board. We are certain that Elke Katz will give us further impetus on this path so that we continue to be a leading, modern and innovative company.”
The Beitlich Family Foundation consists of 5 members, in addition to Elke Katz and Johan de Ruiter, Prof. Dr.-Ing. Götz Gresser (Vice Chairman), Dr. Antje von Dewitz and Prof. Dr. Klaus Müller.
(c) diva-e / Wolford
Der Textilhersteller Wolford möchte seinen Kunden ein modernes und nahtloses Shoppingerlebnis bieten und beauftragt die Digitalagentur diva-e mit der Implementierung einer revolutionären Omnichannel-Lösung. Filialen, Online-Shop und Marktplätze wie Zalando und Amazon werden dabei nahtlos miteinander verknüpft. Zum Einsatz kommt die Software-Architektur „MACH“, die für maximale Flexibilität und bestmögliche Benutzerfreundlichkeit sorgt.
Der Textilhersteller Wolford startet mit „Wolford X“ eine umfassende Digitalisierungsinitiative mit mehreren Partnern, um sich zukunftsorientiert aufzustellen und die Kundenerfahrung auf ein neues Level zu heben. Ziel ist die Etablierung einer Omnichannel-Lösung, bei der Filialen, Online-Shop, Social Media und Marketplaces miteinander verknüpft werden. Die Digitalagentur diva-e ist als führender Partner im Projekt mit der Umsetzung des Großteils der Plattform für die neue Omnichannel-Lösung beauftragt. Mit dem Einsatz des MACH-Architekturansatzes implementiert diva-e eine zukunftsträchtige Infrastruktur, die für Wolford die Möglichkeit schafft, zukünftig mit hoher Geschwindigkeit die Komponenten der Omnichannel-Plattform weiterzuentwickeln, umzugestalten, auszutauschen und so neue Services auszurollen. Ebenfalls an dem Projekt beteiligt sind Commercetools, Newstore, Bloomreach, Tealium, Stibo STEP und Vue Storefront.
Zum Einsatz kommt die erste und international führende Omnichannel-Plattform von NewStore. Sie bietet Kunden eine nahtlose und stark individualisierte Einkaufserfahrung, die beispielsweise Endless Aisle Szenarien ermöglicht. Bei diesen werden Kunden beim Besuch eines stationären Geschäfts erkannt und der Verkäufer erhält über eine App die Kundeninformationen zu den bereits im Online Shop favorisierten oder gekauften Produkten. Diese oder ähnliche Produkte kann er dann direkt zur Anprobe anbieten. Sollte der gewünschte Artikel im stationären Store nicht vorrätig sein, besteht zudem die Möglichkeit, sich diesen taggleich nach Hause senden zu lassen.
Die Voraussetzung und gleichzeitig Herausforderung für dieses neuartige Shoppingerlebnis ist die Verknüpfung verschiedener Daten. Kunden-, Produkt- und Bestelldaten müssen im Sinne eines bestmöglichen Kundenerlebnisses an allen Touchpoints zusammengeführt werden.
Das umfangreiche Omnichannel-Projekt ist eines der Ersten seiner Größe am europäischen Markt und wird voraussichtlich im Juni 2022 abgeschlossen sein.
diva-e Digital Value Excellence GmbH
The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement welcoming House passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for face masks, isolation gowns and other personal protective equipment (PPE).
“We commend the House for getting the bipartisan infrastructure bill across the finish line today, and we are pleased the legislation will now go to President Biden for his signature. This is the first step in a long-term strategy that is critically needed to permanently onshore PPE production to ensure our nation is prepared for the next health security crisis,” said NCTO President and CEO Kim Glas. “This infrastructure package will help incentivize the reshoring of PPE production by guaranteeing long-term federal contracts and expanding Berry Amendment rules to more federal agencies’ purchases of PPE products, important priorities of the U.S. textile industry.”
NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant (containing 100 percent domestic content); guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.
NCTO
Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.
In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.
Based on the further expansion of the portfolio with sustainable products and new applications for e-vehicles as well as the increase in market share with existing and new customers, particularly in Asia, the Company expects a profitable revenue growth at market level in the medium term. Based on the expected revenue development, further progress in the turnaround of North America as well as the consistently practiced operational excellence in all business areas, Autoneum targets an EBITDA margin of 13% in the medium term. Accordingly, a solid free cash flow in the amount of 6% of revenue and a further increase in the equity ratio to over 35% are targeted. The Company still intends to pay a dividend to shareholders of at least 30% of the profit attributable to Autoneum shareholders.
Autoneum Management AG
For its 2021 Green Collection, the Italian luxury hosiery brand Sarah Borghi presents a broadened product offer in terms of colors and categories, meeting the needs of a stylish, yet sustainable consumer. By mixing fashion, quality, innovation and research, the tights and stockings powerhouse continues its development in the journey towards a conscious future.
The evolution of the Green Collection, the sustainable hosiery collection first launched in 2020, confirms the efforts of the brand in promoting a new generation of attractive fashion and design which actively encourages and supports a responsible change in culture and smart products offer.
Lately, a decisive step has been added to the brand’s history thanks to the publication of the Integrated Report by Gizeta Calze, Sarah Borghi’s top-notch producer and first Italian company in the hosiery sector to include sustainability throughout its business model. A commitment of responsibility and transparency on a path that has been carried on for years and that, today more than ever, becomes of the utmost importance, as stated by Luca Marzocchi, CEO of Gizeta Calze. The Integrated Report provides a complete view of the business strategy, operating model and governance, which combines financial information with sustainability insights, conceived as complementary to other strategies and, indeed, essential for increasing business value.
The collection
The collection presents a range of versatile, colorful products combined with extra-luxury comfort and designed for every type of woman: from seductive tights to everyday socks, together with knee- highs, up to athleisure with leggings.
The responsible collection features two new generation materials. One is Amni Soul Eco®, the world’s first biodegradable in anaerobic conditions polyamide 6.6 yarn that degrades in around 5 years* after disposing of in landfill, developed by SOLVAY and produced and distributed by FULGAR. The other is ROICA™ V550 by leading fiber manufacturer Asahi Kasei, a premium sustainable stretch yarn boasting the Gold Level Material Health Certificate by Cradle-to-Cradle Product Innovation Institute** as it has been evaluated for impact on human and environmental health. Moreover, it smartly breaks down without releasing harmful substances in the environment according to Hohenstein Environment Compatibility Certification. Key elements that makes ROICA™ V550 a precious choice when it comes to Circular Economy material approach.
Sarah Borghi / GB Network – for ROICA™
(c) Alchemie Technology
Alchemie Technology, innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.
While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.
Fabric dyeing is the most polluting part of fashion and activewear manufacturing, involving industrial scale dye baths and huge amounts of dye chemicals, steam, electrical power, and consequent high CO2 emissions. Repeated washing of the dyed fabric, required to remove dye residue, is responsible for 20% of the world’s wastewater pollution and excess dye is discharged into waterways, affecting the health of some of the world’s poorest communities. In more regulated areas, water pollution is reduced through reliance on energy intensive water treatment plants.
However, an environmental step change can be achieved by adopting new digital technology that can dye fabrics with an 85% reduction in energy consumption and a dramatic 95% reduction of the 1.3 trillion litres of water currently used by the industry each year.
For example, dyeing one polyester shirt using current methods generates 4.5 litres of wastewater and produces 0.17 Kg of CO2, compared to low energy digital technology, which uses less than 0.2 litres of water and reduces carbon emissions to 0.03 Kg. Multiply these numbers by the billions of garments dyed each year and the scale of the environmental problem, if nothing changes, is clear to see. Equally, the amount by which the textile industry can improve its carbon footprint is dramatic and can be done quickly if action is taken now.
Dr Simon Kew, Managing Director, Alchemie Technology comments “The technology now exists to enable the textile industry to make a significant contribution to helping meet the world’s net zero, climate change goals. But it requires the support of governments through investment, grants and legislation and the critical effort of brands, and their manufacturing supply chains to work together to make the change.”
Alchemie Technology
Indorama Ventures Public Company Limited issued a THB 10 billion triple-tranche Sustainability-Linked Bond, showcasing the company’s long-standing commitment to sustainable growth. It is the largest SLB issued in Thailand and the first offered to both institutions and high-net-worth investors.
The bond is part of IVL’s financing strategy across a range of instruments linked to the company’s sustainability targets. It is aligned with internationally accepted standards including International Capital Markets Association’s (ICMA) Sustainability-Linked Bond Principles and the Loan Market Association’s (LMA) Sustainability Linked Loan Principles.
The SLB is linked to IVL’s performance of reducing GHG emissions intensity by 10% by 2025 (from a 2020 base), increasing recycling of PET bale input to 750,000 tons per year by 2025, and achieving 25% renewable electricity consumption in 2030.
The triple-tranche structure includes 5-, 7-, and 10.5-year tenors, offering coupons of 2.48%, 3.00% and 3.60% per year respectively, targeting asset managers, commercial banks, insurance companies, cooperatives and high-net-worth individuals. With the orderbook peaking at over THB 17.8 billion due to strong interest in the sustainability-linked instrument, oversubscription was around 3x over the planned issuance amount of THB 6 billion with a green shoe option of THB 4 billion. In view of the strong orderbook from the investors, the company decided to exercise the green shoe option and increased the issuance to THB 10 billion, setting a new benchmark as the largest SLB transaction in Thailand. IVL appointed Bangkok Bank, Kasikorn Bank, Krungthai Bank, Siam Commercial Bank, and The Hongkong and Shanghai Banking Corporation Limited, Bangkok Branch as arrangers and bookrunners for the transaction.
On 23 September 2021, the bond was assigned an AA- rating and a “stable” outlook by TRIS Rating following a strong recovery of petrochemicals and derivatives and IVL’s growing profitability.
Under the terms, all tranches must purchase Energy Attribute Certificates (EAC) or voluntary carbon offsets in the event of failure to meet the sustainability performance targets (SPT). The testing dates for tenors with a maturity of 5 and 7 years are 31 December 2025, and 31 December 2030 for the 10.5-year tenor. SPT performance will be independently verified upon the testing dates.Proceeds for the issuance will be used to finance IVL’s corporate working capital and refinance existing debt.
In recent years, IVL secured loans linked to improvements in the company’s sustainability performance as a global leader in environmental, social and governance (ESG) integration. These included Thailand’s first Green Loan of USD 200 million and EUR 200 million from Japan’s Mizuho Bank, Thailand’s first cross-border Sustainability-Linked Ninja Loan worth USD 225 million from 16 institutions in Japan and a Blue Loan of USD 300 million arranged by International Finance Corporation and funded by Asian Development Bank and DEG.
Indorama Ventures Public Company Limited
(c) CHIC / JANDALI
The fashion world of China met at the physical event CHIC Shanghai from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai
487 exhibitors presented themselves in clearly structured segments on 50,000 square meters. Maximum compliance with the security measures determined the course. Against this background the exhibitors welcomed more than 20,000 trade visitors and reported cheerful orders.
The 487 exhibitors were also satisfied with the business activity and reported successful orders.
Perfect presentation platform: the CHIC Matching area
The expanded matchmaking events at CHIC were also enthusiastically received.
In total, over 37 matchmaking events took place in the specially set up matching area consisting of several presentation platforms and private negotiation rooms at the fair. From company presentations by industry giants such as Shein, through trade fair tours to selected one-on-one discussions, CHIC brought exhibitors and visitors together in a targeted manner. More than 600 participants have been matched by this CHIC event. Among them visitors such as Shein, Walmart, Wang Yi Yan Xuan, Tiktok, BAILIAN GROUP, LIQUN etc, parts of the organizer's broad network.
Continuing growth: sustainable productions
Sustainability is one of the most important consumer trends in China. CHIC played the theme in all exhibition areas; from womenswear, kidswear and menswear to accessories, sustainable collections were represented in all segments.
Design talent and traditional styles
In the IMPULSES area, innovative designer brands showed inspiring trends, high-quality collections and fashion variety like Kmusso, MIJA or Yu Jian Tian with its new design collection made by natural materials such as mulberry silk and wool, presenting the unique traditional Chinese style.
CHIC Shanghai presented the entire range of the fashion business in a total of 12 exhibition segments. This year's acclaimed visual concept, created by lava beijing, has been awarded the Bronze Award of the Hiiibrand Awards 2021 in the Identity category.
Digital tools and physical events
In addition to the on-site trade fair offer, CHIC is expanding its reach through the consistent use of digital tools. The CHIC app combines all the functions needed for a successful trade fair participation, from the digital trade fair catalog and matchmaking to direct appointments and live chats for all participants who cannot be on site.
The next CHIC in Shanghai will take place in March 2022.
CHIC / JANDALI
DyStar, a specialty chemical company with a heritage of more than a century in product development and innovation is exhibiting at the 21st China Interdye 2021 from 17 to 19 November at the National Exhibition and Convention Center (Shanghai).
China Interdye is the largest global exhibition for the dye-chem industry. The trade event will consist of technical seminars, conferences and events organised by exhibitors and relevant industry associations respectively.
DyStar’s managers will discuss various sustainable solutions which they offer to the textile supply chain. They will also be showcasing our latest product innovations for visitors from Brands and Retailers, manufacturers, and production houses to enhance their manufacturing process and improve end-product quality.
Customers can expect to find the following highlighted products and concepts at the event:
DyStar Singapore Pte Ltd
