From the Sector

Um aktuelle und künftige Herausforderungen zu meistern, benötigt Deutschland vermehrt Innovationen in der Industrie. Das gilt insbesondere für den Mittelstand. Die maßgeblichen Parteien haben einen zentralen Hebel dafür erkannt: Die verstärkte Förderung des Forschungstransfers. Diese muss effizient dort ausgebaut werden, wo die Wirkung für zukunftsweisende Innovationen am stärksten ist, fordert die Zuse-Gemeinschaft.

Während sich deutsche Großunternehmen, u.a. im Automobilbereich, mit zum Teil hohen Gewinnen im ersten Halbjahr 2021, in sehr gutem Zustand befinden, hat die Corona-Krise bei anderen Firmen, gerade bei zahlreichen Mittelständlern, zu finanziellen Einschnitten geführt, begleitet von einer Minderung der Eigenkapitalbasis. Laut einem aktuellen Bericht von KfW Research gilt es sicherzustellen, dass Umsatzeinbußen aus der Corona-Krise die Innovationsaktivitäten nicht nachhaltig ausbremsen.

Für die gemeinnützigen Institute der Zuse-Gemeinschaft ist die Projektförderung, neben der Auftragsforschung, anderen Kooperationen und Dienstleistungen, die zentrale Finanzierungsquelle. Daraus gehen Jahr für Jahr erfolgreiche Transferprojekte hervor, ohne dass die Institute institutionelle Bund-Länder-Förderung erhalten. „Die erfolgreiche, unabhängige Forschungsarbeit unserer Mitglieder auf Zukunftsfeldern wie Digitalisierung, Materialwissenschaften, Bioökonomie und Energiewende zeigt, wie durch gemeinnützige Industrieforschung der Transfer wissenschaftlicher Erkenntnisse in die unternehmerische Praxis effizient gelingt“, unterstreicht der Präsident der Zuse-Gemeinschaft, Prof. Martin Bastian.

Projektförderung ausweiten
Unter dem Eindruck der Corona-Krise drohen solche Erfolge künftig in Gefahr zu geraten, wenn es mittelständischen Unternehmen an Mitteln für Forschung und Innovation fehlt. „Dazu darf es nicht kommen. Die Projektförderung muss deshalb ausgeweitet und verbessert werden“, fordert Bastian. Bestätigt sieht sich die Zuse-Gemeinschaft durch die Ankündigung mehrerer Parteien im Bundestagswahlkampf, quer durch das politische Spektrum, erfolgreiche Programme wie das Zentrale Innovationsprogramm Mittelstand (ZIM) und das Förderprogramm Innovationskompetenz INNO-KOM auszuweiten.

„Nach der Wahl gilt es, diese Ankündigungen in die konkrete Umsetzung zu bringen“, mahnt Bastian. Die Zuse-Gemeinschaft schlägt dafür u.a. einen eigenen Haushaltstitel für die gemeinnützige Industrieforschung vor.  „Als ersten Schritt dazu fordern wir die Richtlinie des Bundeswirtschaftsmini-steriums für das Programm INNO-KOM künftig in allen Bundesländern unabhängig von Kriterien der Strukturförderung für sämtliche Gebieten zu öffnen. Gemeinnützige Forschung für den Mittelstand gehört bundesweit gefördert“, betont Bastian.

Eine weitere zentrale Forderung der Zuse-Gemeinschaft: Fairness in der Forschungsförderung. Bei zahlreichen Vor-Ort Terminen machen Institute der Zuse-Gemeinschaft in diesen Tagen gegenüber Bundestagsabgeordneten auf ihre Anliegen ebenso wie auf ihre Forschungserfolge aufmerksam.

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

The web-based monitoring tool gives the user access to cutter- performance data at a glance, any time of day. Reliable key performance indicators are available at all times to help users maximize productivity. The system records productivity levels over a freely definable period using Zünd Cut Center – ZCC (Version 3.4 or later) as data source. Data monitoring provides information users need in order to make informed decisions. This comprehensive overview of production data reveals connections that are often overlooked. Zünd Connect supplies valuable key performance indicators for assessing how efficiently cutting systems are working. To be able to improve cutter efficiency, potential areas of improvement must be uncovered and recognized. This potential lies primarily in the technology but also in the way it is being used.

Zünd Connect is available in a "Monitor" or an "Analyzer" version.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

By working together with members of CirculariTeam®, DSM will produce recycled-based Dyneema® made using SABIC’s certified circular ethylene as a pilot project in both a sailing rope and a pelagic trawl net application. The circular ethylene, from SABIC’s TRUCIRCLE™ portfolio, uses mixed plastic waste as feedstock (mass balance approach), which not only contributes to preventing valuable plastic from becoming waste and the avoidance of carbon emissions compared to incineration, but it will also help preserve fossil resources. These pilots are an important early-stage milestone in the journey toward making fully circular Dyneema® from HMPE post-production and post-consumer waste.

Jon Mitchell, Managing Director at Marlow Ropes: “We’re proud to be one of the first manufacturers to integrate recycled-based Dyneema® within our products and demonstrate the material’s feasibility. By collaborating with materials science pioneers such as DSM and SABIC, we are able to create products that not only deliver superlative functional performance but also have a lower environmental impact. Our products are trialed and tested by professional offshore sailing teams including 11th Hour Racing Team, a proud partner of ours at Marlow, with whom we share a progressive approach to seeking sustainable solutions: no more business as usual."

Klaus Walther, Managing Director at Gleistein: “Warm congratulations to DSM and SABIC for pushing the boundaries of science to deliver a truly unique product. We’re proud that our ropes can be produced from what once was typical household plastic waste. This is an important stepping stone towards becoming circular. It will enable our customer Maritiem BV to further develop high-tech fishing gear whilst contributing to the circular economy. Not to forget Cornelis Vrolijk Fishing Company, who again illustrate their commitment to Corporate Social Responsibility by introducing this concept in fishery.”

• From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

A particular focus will be placed on upcoming policies and regulations and how they impact renewable carbon. The members are currently deciding on where to start specifically, but questions that may be considered are: What does the new climate law and the “Fit for 55-Package” mean for chemicals and materials? What can be expected from REACH and microplastics restrictions? How relevant is the “Sustainable Products Initiative” and the coming restrictions for Green Claims? Circular Economy, Zero Pollution and Sustainable Financing are keywords of the future European landscapes, which might become very concrete for chemistry and materials in the next few years. To what extent the concept of renewable carbon for materials is considered in policy already and how it could be further introduced in future legislation are two of the main questions investigated in the working group “Policy”.

This working group is open to all members of RCI. Policy experts provide the respective analysis as a foundation, organising discussions between members of the policy group and plan meetings with policymakers to introduce the Renewable Carbon concept.

Additional working groups have been created, one with a focus on communication, the other looking at the development of a renewable carbon label. In early September, a renewable carbon community will be launched as a starting point for even more interaction between the members, to discuss strategies, create new value chains and start project consortia.

The Renewable Carbon Initiative (RCI) is a dynamic and ambitious group of interested parties. Membership numbers have now more than doubled since the launch almost a year ago, with RCI now boasting 25 members, 6 partners and over 200 supporters. It welcomes all companies that are on the way to transform their resource base from fossil to renewable.

Der 8. Homecare-Management-Kongress der BVMed-Akademie bringt am 1. Dezember 2021 unter dem Titel "Versorgungsstrukturen zukunftsfähig machen: Wohin soll die Reise gehen?" Hilfsmittel-Leistungserbringer und -hersteller sowie Vertreter der Politik, Krankenkassen, Krankenhäuser, Ärzteschaft und Pflege zusammen, um über die Zukunft der Hilfsmittelversorgung zu diskutieren. Am Vorabend des Kongresses wird es eine politische Podiumsdiskussion zu den Perspektiven der Gesundheitspolitik in der neuen Legislaturperiode geben

Wie können die Versorgungstrukturen zukunftssicher ausgestaltet werden? Welche Bedeutung kommt dabei den Hilfsmittel- und Homecare-Versorgern zu? Welche Anforderungen stellen sich an eine zukunftssichere, wirtschaftliche und digitalere Hilfsmittelversorgung? Diese Fragen stehen im Mittelpunkt des Kongresses mit Impulsvorträgen, Podiumsdiskussionen und Workshops zur Weiterentwicklung der Hilfsmittelversorgung.

Montalvo, an international specialists in web tension control, will be attending the upcoming ICE Trade Show in Orlando, Florida, on October 19-21, where Montalvo presents its latest products and web control solutions.

Visitors can get hands-on experience with a fully equipped and running machine featuring Montalvo’s industry-leading Load Cells, Controllers, Brakes, and more. At the show, visitors will also have the opportunity to see a full live demo line featuring Montalvo U4 Controller, M4 Tension Indicators, US4 Ultrasonic Sensor, and a V-Brake.

Die STF ist zurück aus der Sommerpause und auf die Studierenden wartet ein spannendes halbes Jahr mit einem neuen Jahresthema, darunter zahlreiche Events, wie die Modenschau der Swiss Textile Collection, die am 26. August stattfindet.

Neben den Bachelor-Studienfächern Fashion Design & Technology, Textile Design & Technology und Textile Business Management begrüßt die STF in diesem Jahr die erste Klasse, die mit der Ausbildung zum Bachelor in Interior Design startet. Als schweizweit bisher einzige Bildungsstätte, bietet die STF diesen international anerkannten Abschluss zusammen mit ihrer Partneruniversität der University of West London (UWL) zentral in Zürich an.

The 2022 edition of Cinte Techtextil China has been confirmed to take place from 6 – 8 September at the Shanghai New International Expo Centre. 2021 saw 366 exhibitors and 14,868 visits recorded at the June hybrid event, which offered in-person and digital options for suppliers and buyers.

This year’s edition of Cinte Techtextil China marked the first time the fair was held annually, and the second year physical and online participation options were available, with both aspects well received by exhibitors and visitors.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd elaborated: “The response from our exhibitors this year was the Chinese market is still growing strongly, and having an annual edition allows them to benefit from these opportunities on a more regular basis. The domestic economy has shown strong resilience over 2020 and so far in 2021, and this has allowed the technical textiles and nonwovens sector to maintain the growth momentum it has experienced over the past years. As more economies return to normal in 2022, we expect export orders for the sector to receive a further boost which will benefit those overseas companies with business in the Chinese market.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span the full range of potential uses of modern technical textiles and nonwovens. These categories also span the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

“What I didn’t know then was that my dining partner was the family lawyer of Carl Axel Gustafsson,” Reimar explains. “I had no money and knew nothing about the textile industry and I also quickly discovered the business was not doing so well at that time and tried to get out of the agreement, but he insisted I honour it. He told me he had money and would back me, but I’d have to work hard and pay him back in full.”

Reimar certainly took that advice, and at the age of 92 still travels to his office every day to oversee the operations of the diverse companies now operating under the ACG umbrella.

Although textiles remain the bedrock of the business, under Reimar Westerlind’s management, ACG Group has branched out into many other fields of activity over the past 60 years, and its diversity has also led to some highly unexpected developments.

Like many other European manufacturers, ACG also began to expand beyond its traditional borders from the 1970s onwards – initially into the former Soviet Union and subsequently establishing subsidiaries in Estonia, Lithuania, Finland, the Ukraine and Denmark.

• Aktuelle EAS-Systeme von Checkpoint Systems erfüllen die in Deutschland geltenden Anforderungen in Bezug auf die Belastung durch elektromagnetische Felder

Eine Gefährdungsbeurteilung ist verpflichtend
„Beim Einsatz von elektronischen Artikelsicherungssystemen (EAS-Systemen) zur Diebstahlprävention sind Einzelhändler verpflichtet, eine Gefährdungsbeurteilung hinsichtlich der Exposition gegenüber elektromagnetischen Feldern durchzuführen. Eine Konformitätserklärung des Herstellers ist dafür nicht ausreichend“, sagt ein Sprecher der Berufsgenossenschaft Handel und Warenlogistik.

Die CSA Group, ein international anerkannter und akkreditierter Anbieter von Prüf- und Zertifizierungsdienstleistungen, hat die elektronischen Radiofrequenz-Warensicherungssysteme von Checkpoint Systems in deren Auftrag geprüft und bestätigt die Einhaltung der in Deutschland geltenden Anforderungen in Bezug auf die Belastung durch elektromagnetische Felder.

Es bestehe daher keine Notwendigkeit für Angestellte oder Kunden, einen Sicherheitsabstand zu den Radiofrequenz (RF)-Antennen und Deaktivierungseinrichtungen der aktuellen EVOLVE- und NEO-Serie von Checkpoint Systems einzuhalten. Auch die Berufsgenossenschaft Handel und Warenlogistik (BGHW) bestätigt, dass für die beiden genannten Produktreihen aussagekräftige Unterlagen vorliegen.

Die CSA Group kommt in ihrem Prüfbericht zum positiven Fazit: „Checkpoint Systems hält die vorgeschriebenen Grenzwerte für die Exposition gegenüber elektromagnetischen Feldern direkt an den Antennen und Deaktivierungseinrichtungen ein, das heißt in einem Abstand von null Zentimetern. Daher ist es nicht notwendig, einen Sicherheitsabstand zu den Systemen von Checkpoint Systems einzuhalten“, sagt ein Sprecher der CSA Group. „Für die Beurteilung wurden die einschlägigen europäischen und nationalen Vorschriften und Normen herangezogen.“