From the Sector

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

• HPR is the highest status a plant can achieve for fire risk prevention and protection
• The site Beaulieu Fibres International is the fourth in the Beaulieu International Group to reach HPR status
• Underlines Group’s commitment to risk prevention at B.I.G. sites & to reinforcing our strong business contingency plan

Beaulieu Fibres International, one of the leading polyolefin staple fibre producers, is pleased to announce the achievement of Highly Protected Risk (HPR) status for its production site in Wielsbeke, a designation that means a facility meets the highest industry standards for property protection.

HPR status was awarded by FM Global, Beaulieu International Group’s (B.I.G.) industrial property and business interruption insurer for the past three years. The company offers B.I.G a unique concept that supports the Group in reducing its exposure to loss and increasing its business resilience. A dedicated worldwide team of engineers focuses on providing assistance and protection of its assets, helping the Group to achieve a higher level of risk protection.

The Beaulieu Fibres International site produces high performance fibres for a large variety of applications and market segments. It scored exceptionally well in its FM Global assessment which focused on aspects including fire protection, protection against natural hazards, mechanical breakdown of machinery, cyber risks and consequent business interruption.

Its overall risk mark of 83 ranks it within the top 25% of its industry for fire risk prevention and protection.

Commenting on the Award, Maria Teresa Tomaselli, Global Sales Director Fibres, said: “This HPR fibre production site reinforces strongly our supply chain security and demonstrates our engagement towards our customers and partners. Our contingency planning and risk management are essential, well-considered elements within our long-term business strategy to demanding sectors such as Automotive, Geotextiles, Flooring industries.”

At the joint stand of the Aachen Centre for Integrative Lightweight Construction (AZL) in Hall 5A, booth D17, the Institut für Textiltechnik of RWTH Aachen University (ITA) will demonstrate its expertise in the field of glass fibres, preforms and textile concrete 12-14 March 2019 in Paris.
The exhibits come from various fields of application and address the automotive, aerospace and mechanical engineering sectors.

1. Innovative glass fibre research at ITA
   The newly constructed induction heated glass fibre production line enables increased flexibility in research. For the first time, glass fibres will be produced live at the ITA booth at JEC World. One of the innovations of the system is the inductively heated bushing. It features a flexible design and consists of a platinum/rhodium alloy (Pt/Rh20) for use in high-temperature glasses.
   The glass fibre production line was designed in such a way that new concepts and ideas can be tested quickly. The modular design allows a high flexibility, the induction system a significantly faster operability.
   Research and development projects can therefore be carried out faster and more cost-effectively.
    
2. DrapeCube - Forming of textile semi-finished products
   The DrapeCube offers a cost-effective design for the production of fibre preforms from textile semi-finished products. It is used in the production of preforms for prototypes and in small series and is suit-able for companies active in the production of fibre-reinforced plas-tics (FRP).
   In the production of FRP components, the preforming process de-fines a large part of the subsequent component costs. In small- and medium-sized enterprises, this process step is often still carried out manually. This results in high quality fluctuations and component prices. Especially in the case of highly stressed structural components, the fluctuation in quality leads to oversizing of the components.
   Thus, the lightweight construction potential of fiber-reinforced plastics is underused. One solution is offered by the stamp forming process adapted from the sheet metal forming industry for shaping rein-forcing textiles. The textile is inserted between two mould halves (male and female) and automatically formed. Due to high plant and tooling costs, this process is used almost exclusively in large-scale production.
   The ITA has developed the DrapeCube forming station which offers a cost-effective alternative and is able to completely reproduce the current state of the art for forming textile half branches. The process steps will be demonstrated in a video at the booth.
    
3. Carbon fibre reinforced plastic (CFRP) preform
   The CFRP preform consists of carbon multiaxial fabrics formed by expanded polystyrene (EPS) to optimise draping quality. Preforms of increased quality can be produced by gentle, textile-compatible forming with foam expansion. For the first time, foam expansion was used to form preforms in such a way that the draping quality is improved compared to classic stamp forming.
   The advantages of the CFRP preform lie in the savings in plant costs, as the investment is much lower. In addition, the proportion of waste is reduced because near-net-shape production is possible. In addition, rejects are reduced, as fewer faults occur in the textile.
    
4. Embroidered preform with integrated metal insert
   The 12k carbon fibre rovings are shaped into a preform using Tai-lored Fibre Placement (TFP) which is a technical embroidery pro-cess. For the further layer build-up, a fastener is not only integrated under the roving layers but also fixed by additional loops. The highly integrative preforming approach offers the possibility of reducing weight and process steps as well as increasing mechanical perfor-mance.
   Until now, inserts were glued or holes had to be drilled in the com-ponent. Bonded fasteners are limited by the adhesive surface. The bonding of fasteners into drilled holes results in high drill abrasion and thus high tool wear.
   The advantages of the embroidered preform with integrated metal fasteners are the reduction of scrap due to TFP preforming and the increase in the specific pull-out force. In addition, it is possible to automatize the production of integrative preforms. This makes the preform with integrated metal fasteners interesting for the automotive and aerospace industries.

Gianluca Croci's priority will be to support Lectra's French customers in their transformation towards Industry 4.0
Lectra announces the appointment of Gianluca Croci as Managing Director, Lectra France. Based in Paris, Gianluca Croci reports to Fabio Canali, President, Southern Europe & North Africa.

Gianluca Croci has more than 20 years of experience in the fashion industry. He began his career in 1998 in the department store chain La Rinascente before joining the Giorgio Armani group in 2002, where he managed, from 2006 to 2015, the Belgian and French subsidiaries. Gianluca Croci later held management positions for major fashion and luxury brands, such as Roberto Cavalli and Marcolin, and was recently the Sales & Marketing Director for Technogym France, a designer of sports equipment.

Gianluca Croci will fulfil Lectra's promise to fashion companies in France: to facilitate the digitalization of their know-how in order to empower them to make a successful transition to Industry 4.0. This ambition is being realized by the 2018 launch of the revolutionary solution, Fashion On Demand by Lectra, which enables fashion companies to customize a garment or make it to measure. This end-to-end personalization offer—the first of its kind—complements a portfolio that is known to solve the pressing challenges confronting the fashion industry. The latest, Kubix Link, developed by Kubix Lab, a start-up acquired by Lectra in January 2018, is an innovative platform for managing product information.

"France is known worldwide for being a leader in fashion and technological innovation. It is a country where brands, retailers and manufacturers have already begun their transformation towards Industry 4.0. I am proud to support our customers’ pursuit of greater connectivity and collaboration in their operations, as well as in assisting them to make the shift to personalization," says Gianluca Croci.
Gianluca Croci and his teams are committed to providing their French customers with the high level of expertise and service that characterizes Lectra's value proposition.
Gianluca Croci's efforts are also tied to the dynamic activities of Lectra Southern Europe & North Africa. There are many synergies in the region’s fashion industry, ranging from the sharing of expertise between French and Italian companies to the integration into their ecosystem of the Moroccan and Tunisian subcontractors.

"Our regional organization enables us to be closer to our customers’ challenges and to provide them with the support they need to achieve their ongoing targets. Gianluca Croci will lead the French teams and contribute to the region's growth," says Fabio Canali. "His extensive experience with major Italian and French companies brings new energy to the development of Lectra France.”
Gianluca Croci is a graduate of the European Institute of Business Administration (INSEAD), Fontainebleau (France), and the Catholic University of the Sacred Heart, Milan (Italy).

Chomarat, a leader in technical textiles and composite reinforcements, is developing its Coatings & Films business at its French sites. The Group has just acquired an extruder and a graining line to increase its production capacities and develop new, more efficient solutions, particularly in the field of TPO (polyolefin thermoplastics). These two technological investments are part of the €35 million investment plan announced by the Group in mid-2017.

AN EXPANDED OFFER WITH THE NEW GRAINING LINE
The graining line gives texture to the coated textile and provides a differentiation of appearance or a functionalization, such as non-slip or durability. "We will use this new technology to broaden the scope of material we process (including the production of TPO sheets with or without backing), and to improve the perceived quality by a better grain definition," explains Philippe Chomarat, Director of the Coatings & Films business at Chomarat. This technological investment enables the Group to increase its production capacities and offer new solutions for the automotive and luxury bag markets.

INCREASING PERFORMANCE WITH THE NEW EXTRUDER
The new extruder increases the Chomarat production capacity for coated textiles and allows production in larger widths. The technology consumes less energy and emits very low level of VOCs, in line with the Group's sustainable approach. It also supplements existing solutions for developing biosourced coated fabrics. "This is a strategic investment for Chomarat, as in addition to PVC, we will be able to work with new materials such as TPO, TPU and new biosourced materials. We will offer innovative solutions for all our markets—pipes, luxury bag, automotive and protection," concludes Philippe Chomarat.

For SEEK’s 10thBirthday we want to give something to those who are usually overlooked. Together with One Warm Winter, we are wrapping up Goodie Bags for the homeless and taking them where they are actually needed – to the streets. That’s why we are asking brands to donate old collection pieces, samples, stock, etc.
 
“We are really happy to team up with One Warm Winter for our SEEK donation initiative. We want to counteract the omnipresent throwaway mentality. Every step counts. Homelessness is a growing issue, especially in Berlin – we hope to bring some warmth to the city streets.”
– SEEK Team
 
“With the GiveBag the fashion industry is setting an important example in terms of awareness and sustainability. Ultimately, these bags are filled with what is often left out by the economy: true charity.”
– Dominic Czaja, One Warm Winter
 
The huge One Warm Winter GiveBag will be filled on all three show days (15–17 January) in front of the SEEK location at Arena Berlin. Every donor will receive a donation receipt and stay informed about the next steps. The GiveBags will be handed out to people in need by the SEEK team and One Warm Winter at the next charity event.

Additional support will be provided by TOMS with a requested voluntary donation in exchange for a nice hot coffee. The end sum will be matched by TOMS and donated directly to One Warm Winter.
 
“Giving is at the heart of everything we do at TOMS, but it’s projects like this that are in our own backyard that hit home the most. Homelessness is one of the issues closest to our hearts, so we couldn’t be more honoured to work with SEEK and One Warm Winter this season to lend a hand to our friends in Berlin that need it most.”
– Lisa Hogg, TOMS EMEA Marketing Director
 
The reaction from the SEEK brands towards our initiative has been amazingly positive – almost all of them are actively and enthusiastically participating by donating garments that cannot be sold anymore.
 
“Palladium Boots is very excited about this call for action and being able to take part in supporting the cause. City terrain is what we are built on and we are glad to gift a little warmth and particularly the gesture of humanity together with SEEK and One Warm Winter.”
– Melanie Bruss, Marketing Manager, Palladium Boots D, AT & NL
 
“The entire CHIEMSEE family is amazed by this initiative! It’s a great feeling to pass on some warmth and distribute it more fairly. Thank you SEEK and One Warm Winter for the idea – the fashion industry definitely needs more of those!”
– The CHIEMSEE family

• The opening of Perlon’s new site in Haining City, Zhejang Province was celebrated in a festive style on 29th November 2018.

Around 140 invited guests experienced the splendid opening ceremony for the newly constructed site in the urban development zone, with a traditional, cultural programme, subsequent exhibition and gala dinner in the nearby LANGHAM PLACE hotel. The significance of this new site for the Perlon Group was emphasised and the support of the Haining region was applauded, in the official speeches by Serafin co-founder Philipp Haindl, Perlon CEO, Florian Kisling, CEO of Perlon in China, Xiaotao Xia, as well as, the director of Haining City People’s Congress, Mr YAO Minzhong. After the obligatory cutting of the ribbon for the official opening, the first spool of PMC Filament was presented to Mr Haindl to symbolically mark the start of a new filament production line.

The vision to have a presence in China and to create sufficient production capacity to fulfil the customers need for quality filaments made by Perlon® has been smoothly delivered by Perlon Group, the Serafin group company. After less than 2 years in the planning and building phase, the new build project and line relocation from the previous plant in Haining will be concluded by the end of the year. With sufficient space for further production lines, the Groups requirement for a long-term commitment in China has been created. Alongside filaments for paper machine clothing (PMC), the plan is to manufacture products there for applications in the other Perlon® main markets in the next few years.

Emphasis on Process, Third-Party Validation and Outcome-Based Testing

Canadian Linen and two U.S. AmeriPride Services Inc.’s locations have recently earned have earned the Hygienically Clean Food Safety certification, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing. The company’s Canadian Linen and Uniform Service facilities in these locations have earned the Hygienically Clean Food Safety certification:  

• Alberta: Edmonton and Lethbridge
• British Columbia: Victoria and Vancouver/Burnaby
• Manitoba: Winnipeg
• Nova Scotia: Halifax
• Ontario: Etobicoke, London, North York and Ottawa
• Quebec: Quebec City
• Saskatchewan: Regina and Saskatoon

The recently-certified U.S. AmeriPride laundries are located in Vernon, Calif. and Durant, Miss.  
The certification confirms the laundry’s dedication to compliance and processing garments and linens using BMPs as described in its quality assurance documentation, the focal point for inspectors’ evaluation of critical control points (CCPs) that minimize risk. The independent, third-party inspection must confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand legal requirements
• OSHA-compliant
• Physical plant operates effectively

In addition, these facilities each passed three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean garments and other reusable textiles with diminished presence of harmful bacteria. To maintain their certification, laundry plants must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained.
This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for animal processing, dairies, fruit/vegetable, bakeries, grain and other food and beverage industry segments.
These Vernon, Calif. and Durant, Miss. locations of the AmeriPride chain join these laundries who have previously received the Hygienically Clean Food Safety certification:

• Tuscumbia, Ala.
• Bakersfield and Fresno, Calif.
• Twin Falls, Idaho
• St. Cloud and Minneapolis, Minn.
• Amarillo Texas

Hazard Analysis and Critical Control Points (HACCP) practices are examined in the Hygienically Clean Food Safety inspection process, evaluating the plant’s techniques for:

• Conducting hazard analysis
• Determining CCPs, monitoring their control, correcting them if not under control
• Validating and verifying HACCP system effectiveness
• Documenting and record-keeping to show ongoing conformance

On-site inspections also evaluate practices relevant to handling and processing textile products used in food manufacturing/processing establishments for adherence to U.S. Food and Drug Administration (FDA) and Centers for Disease Control and Prevention (CDC) directives. Introduced in 2014, Hygienically Clean Food Safety brought to North America the international cleanliness standards for laundering garments and other textile products for food manufacturing used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.
Twelve of the company’s U.S. locations have achieved the Hygienically Clean Healthcare certification:

• Little Rock, Ark.
• Phoenix and Watkinsville, Ga.
• Twin Falls, Idaho
• Topeka, Kan.
• Bemidji and Minneapolis, Minn.
• pringfield, Mo.
• Omaha, Neb.
• Roswell, N.M.
• Memphis, Tenn.
• Lubbock, Texas

The company’s Canadian Linen and Uniform Service facility in Lethbridge, Alberta, is also Hygienically Clean Healthcare-certified.
In January 2018, Philadelphia-based Aramark Corp. announced the completion of its acquisition of AmeriPride, making AmeriPride a wholly owned subsidiary. Aramark’s uniform rental and career apparel business is headquartered in Burbank, Calif.

• Three companies with complementary strengths team up
• BASF leads a Series A investment round with Materialise as one of the co-investors

BASF Venture Capital is leading the Series A investment round in Essentium, Inc., an innovative developer of disruptive, industrial additive manufacturing solutions headquartered in College Station, Texas. Materialise is one of the co-investors in the Series A investment round in Essentium, Inc. BASF and Essentium have been working together on advanced fused filament fabrication (FFF) solutions using Essentium’s proprietary FlashFuseTM technology for high mechanical strength in the build direction for extrusion printed parts. The two companies are now extending their strategic partnership to establish a consistent global materials supply chain supportive of Essentium’s new High Speed Extrusion (HSE) additive manufacturing platform. Essentium and BASF welcome Materialise to enter this strategic partnership to develop 3D printing software for the Essentium technology. This will allow users to take advantage of the speed of the HSE technology while having immediate access to the full Materialise software capabilities for professional 3D printing. The three companies combine their complementary strengths to jointly advance 3D printing technology and customer value to enable industrial additive manufacturing.

BASF is contributing comprehensive material know-how, a broad product portfolio, and its global network to the partnership. Materialise adds nearly three decades of expertise in the development of innovative 3D printing software solutions. Essentium is addressing additive manufacturing at scale by developing an industrial additive platform truly built for the production floor, providing its FlashFuseTM electric welding technology, and engineering-grade, multi-layer filaments for demanding applications. Together, the three partners intend to innovate solutions with advanced combination of hardware, software and materials to unleash the potential of Essentium’s unique high-speed-printer technology, coordinating their strengths to the best advantage.

“Our joint investment strengthens our co-operations with both Essentium and Materialise and accelerates the innovation potential of this powerful team to the benefit of BASF’s customers,” said Markus Solibieda, Managing Director of BASF Venture Capital.

“With this strategic investment, Essentium and BASF are focusing on improved supply chain performance, material consistency and accessibility. Essentium is also delighted to begin a new partnership with Materialise as the three companies focus efforts toward a new era for smart solutions in the global additive extrusion space. Together, we believe manufacturers everywhere will be able to accelerate production due to increased access to our new solutions, bolstered by a holistic, customer-centric approach,” comments Dr. Blake Teipel, CEO of Essentium, Inc.

“Materialise, Essentium and BASF share a vision for growth in the 3D printing industry that builds on the creation of meaningful applications in an open and vibrant ecosystem”, said Bart Van der Schueren, CTO of Materialise. “This partnership helps to promote a more open market model, which will fuel the adoption of 3D printing in the industrial field by offering users more control, more choice in materials and ultimately lower cost and higher volumes.”

BASF and Materialise are joined by a syndicate of private venture investors. Moving forward, BASF, Materialise, and Essentium will jointly drive the transition from 3D printing to scalable additive manufacturing.

CHOMARAT, the expert in composites reinforcements, is the partner of BABOLAT with its multiaxial carbon, C-PLY™ Hexagonal. Indeed, the specialist racket sports goods manufacturer is launching the new version of the BABOLAT’s Pure Aero. A combination of ultra-modern design and high performance, this tennis racket for champions has made an appearance on the courts of the Rolex Paris Masters. “We are very proud to be chosen by BABOLAT. Our new carbon reinforcement, added to the heart of the racket, enables better control and makes each shot more precise and stable,” says Pascal JOUBERT DES OUCHES, Sports Equipment Market Director at CHOMARAT.

C-PLYTM HEXAGONAL, THE PERFECT ALLIANCE OF PERFORMANCE & DESIGN
The addition of C-PLY™, CHOMARAT’s multiaxial carbon reinforcement, to the core of the BABOLAT’s Pure Aero has increased the racket’s stability while enhancing its performance. The specificity of the reinforcement lies in its stitching thread. “This unique thread brings out the color of the resin pigments because it has been designed to remain visible after its impregnation. It also contributes to extra reinforcement and an exceptional design!” concludes Pascal JOUBERT DES OUCHES.