From the Sector

Outgoing 2018-19 National Council of Textile Organizations (NCTO) Chairman Marty Moran delivered the trade association’s 2019 State of the U.S. Textile Industry overview at NCTO’s 16th Annual Meeting on March 21st at the Capital Hilton in Washington, DC.

Mr. Moran’s speech outlined (1) U.S. textile supply chain economic, employment and trade data, (2) the 2019 policy priorities of domestic textile manufacturers, and (3) other NCTO activities.  

A link to his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Moran is CEO of Buhler Quality Yarns, Corp., a fine-count yarn supplier headquartered in Jefferson, Georgia with plants and/or offices in America, Europe, the Middle East and Asia.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.  

• U.S. employment in the textile supply chain was 594,147 in 2018.  
• The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.  
• U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.  
• Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

On the international stage of JEC World, composite innovation is everywhere! On the planets, on the live demo zones, on the stands, and also on stage... During this second day of the world's largest composites exhibition, the winners of the JEC Innovation Awards were announced.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

The ceremony was opened by Bertrand Piccard, the founder and visionary behind Solar Impulse, the first zero-fuel aircraft with perpetual autonomy.

The jury then announced the ten composite innovation champions selected among 30 finalists, from more than a hundred entries, and the public awarded its prize.
"JEC Group supports innovation and has created the Composites Reference Prize to reward industry champions and promote their innovations. Every year, we receive more than a hundred applications from all over the world," explains Franck Glowacz, Composites Expert at JEC Group.

Download the PDF to see all winning companies.

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

Prompted by the need to offer an adequate in-depth analysis of topics such as the integration of sustainability in fashion and the importance of the transition to the circular economy, the shared journey of C.L.A.S.S., the multi-platformhub, a reference resource since 2007 for smart innovationin fashion and Polimoda, the internationally recognized institute, world-renowned for its independent approach and innovative vision in terms of “fashion education”, as a result of the perfect combination of business and design.

Eight sessionsduring which topicsrelated to smart innovation, the new role of the designer and the importance of a new generation of communication along withthe urgency of a transversalcooperation and the development of new business models strictly linked to a circular economy approach.
An inspirational path,intensive and engaging, aimed at involving Polimoda students of theFashion Design and Design ManagementMasters –in their future role of protagonists of the fashion industry.
A shared project, aimed at fostering the development of punctual knowledges on responsible innovation, which is to consider effective because of that concrete approach that involves the introduction of smart materials with a view to a circular economy approach.
This is how Polimoda, the fashion institute that boasts an innate and strong policy and strategic vision on the fashion universe at 360 °, and C.L.A.S.S, a reference point since 2007, specialized in the integration of smartvalues withinproducts and fashion companies, in addition to education, partneringto givelife to a driving force thattranslates into a culturalbackground for students.

On March 7th, European Commissioner on the Internal Market, Industry, Entrepreneurship and Small and Medium-Sized Enterprises has been welcomed in Prato by the mayor Matteo Bittoni and by the Councilor for Productive Activities Daniela Toccafondi, together with the economic categories for a meeting organized by the Department of Economic Development with reference to the Fashion System.

By the end of the meeting, the only company visit planned has followed, and brought to the Manteco headquarter. Manteco is a firm leader in the production of wool and recycled fabrics since 1943.  Today led by Matteo and Marco Mantellassi, Manteco is able to value territory, sharing economy, sustainability, internationalization and the use of renewable energies – not only as an investment policy but also as a distinctive element for the identification of the company as an international reference point for the fashion textile sector.

The company visit was attended by European Commissioner Elzbieta Bienkowska, Justina Morek, member of the Commissioner's Cabinet, Beatrice Covassi, director of the Representation of the European Commission in Rome, Slawomir Tokarski, director for advanced and innovative manufacturing in the general direction of the internal market and European Commission industry, MEP Hon. Nicola Danti, dr. Alberto Biginelli, Councilor Daniela Toccafondi; The Mayor of Prato Matteo Bittoni, the Mayor of the Municipality of Montemurlo, Mauro Lorenzini.

The key topic of the meeting has been the circular economy  – that is to consider very close to Manteco – along with some others explored such as the value of Made in Italy, the importance of a responsible approach to reuse and the need for a traceability system. Noteworthy the visit to the Manteco Archive, during which the focus has been on raw materials, with reference to the tradition and experience that today are perfectly combined with the strong innovative drive and creativity. Upon request of the European Commissioner, the corporate approach with a view to circular economy, km0 production system and how it fits into the productive district were also dealt with.
 
«I visited a textile company that recycles or reuses waste materials to produce wool of the highest quality: this is an excellent example of circular economy. The circular economy is an extremely interesting subject everywhere in Europe, because we are leaders in sustainability, and we want our children and ourselves to be able to live in a country that is livable in the future, so that's why it is worthwhile to show stories in Europe of success like this, which is a good practice that we are putting into practice, starting with the big industries and the energy-intensive ones » - Elzbieta Bienkowska -

JEC WORLD 2019 is turning Paris into the composites capital of the world.

As well as dozens of conferences, composites circles and live demos, plus hundreds of other events, the first day of the show was marked by the announcement of the three winners of the largest international startup competition in the composites field!

In the last three years, 270 projects have been picked out from over 30 countries, with 30 finalists and a total of nine winners.

THREE WINNERS
Ten finalists selected from 120 entries pitched to an international jury. The pitch session opened with an inspiring speech by Enrico Palermo, President of The Spaceship Company. He introduced the next generation of reusable space vehicles and their impact on costs, safety and the environment during the launch into space.
The programme incited enthusiasm from Peter Hopwood, founder of Hopwood Communications, who encouraged the finalists to develop their stage presence and galvanise their pitches.

At the afternoon’s award ceremony, three competitors were selected for the following prizes:

AIRGO DESIGN (Singapore)
World's first full composite economy class passenger seat developer.
www.airgodesign.com

AREVO (USA)
Delivering the future of composite manufacturing today through breakthrough advancements in software, materials, and robotics. Through enabling the 3D printing of large, mass-produced parts and structures, AREVO is revolutionizing mainstream manufacturing and the global supply chain.
www.arevo.com

WOODOO (France)
Augmented wood.
https://woodoo.fr

The public vote: LAVOISIER COMPOSITES (France)
New generation of material entirely sourced from the French aerospace transformation sector.
www.lavoisier-composites.com

The EU-funded Project, in which Devan Chemicals is a key partner, held a kick off meeting end of February 2019 at the EU Commission in Brussels, Belgium. The project consortium, led by Belgian R&D centre CENTEXBEL, consists of 17 European partners from across the value chain including design, manufacturing, NGOs, and research and innovation.

The focus of the consortium is on coated and painted textiles and plastic materials which are currently not recyclable. Ambitious plastic recycling targets of 50% have been set by the European Plastics Industry, and to meet these targets, smart solutions to enable the circular use of textile and plastic parts with multi-layer coatings must be considered.

DECOAT has therefore been established to investigate triggerable smart polymer material systems and appropriate recycling processes. The solutions will be based on smart additives (like microcapsules or microwave triggered additives) that will enable the efficient of coatings and other finishes, activated by a specific trigger (heat, humidity, microwave, chemical) to permit recycling.        

Devan’s specific role is in the development of microcapsules that will release its active core on application of a certain trigger (e.g. heat) at the end of life of the article. This active core material may be something that, for example, will promote the detachment of different coating layers (by separating them), opening the possibility for recyclability/re-use of the base materials. Different active core ingredients will be evaluated, and Devan will develop processes for each type of core ingredient and for each type of coating layer/matrix.

The bold aim of the four-year project is to decrease landfill by 75% of coated articles that are presently difficult to recycle, such as clothing, electronic goods and automotive components. A reduction in the carbon footprint by at least 30% for the considered products is aimed for. By enabling the recycling of such materials, DECOAT is expected to generate in the medium term a new market valued at over 150 million Euros in Europe.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

• Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami

Neumünster – Oerlikon presents its complete nonwoven plant portfolio for the production of airlaid, meltblown, spunbonded and hybrid materials at this year’s IDEA in Miami from 25–28 March. The focus of its presentation will be on solutions for hygiene, medical and other disposable nonwovens. Visitors to this year’s IDEA can inform themselves on the wide range of products at Oerlikon’s exhibition stand (no. 1724).

Two strong partnerships for disposable nonwovens

While two years ago the Nonwoven business unit of the Oerlikon Manmade Fibers segment focused almost exclusively on solutions for technical applications, the company has now expanded its product portfolio to include solutions for disposable nonwovens by establishing strong partnerships.

Oerlikon & Teknoweb Materials – two strong partners for the nonwoven industry

As early as spring 2017, Oerlikon Manmade Fibers' Nonwoven business unit had entered into a strategic partnership with the Italian company Teknoweb Materials. Teknoweb Materials is an established technology supplier in the field of wipes and other disposable nonwovens. With its LEVRA technology, the company has its own patented, particularly efficient manufacturing process for wipes. It also has extensive process know-how on the making and further processing of these nonwoven materials. The Nonwoven business unit of Oerlikon’s Manmade Fibers segment completes this partnership with its well-established machine and plant solutions. Teknoweb Materials will also be represented at IDEA at the Oerlikon exhibition stand (no. 1724).

Cooperation with Shaoyang Textile Machinery

For spunmelt systems solutions for hygiene and medical applications, Oerlikon has been in cooperation with the Chinese machine and plant manufacturer Shaoyang Textile Machinery since Autumn of last year. The goal of these cooperation partners is to advance the international marketing of spunmelt plants outside of China. Oerlikon Manmade Fibers’ Nonwoven business unit contributes its plant engineering know-how and is responsible for product and process guarantees. Oerlikon also assumes the overall project responsibility as well as world-wide customer service outside of China. In return, Shaoyang, with its headquarters in the city of the same name in the Hunan province, supplies the plant technologies.The advantage for the customer: competitive solutions at an attractive price level with comparatively low investments.

ROICA™ discloses five key and influencing brands with unique outfits already available in the market, that demonstrate how ROICA™ is able to deliver and transform basic performant stretch in eco hi-tech valuable innovations interpreted in five, completely different, contemporary lifestyles!

Inspired by the need for style-conscious, sustainable garments that are versatile for every life situation, AEANCE was created as a brand that merges ready-to-wear with technical apparel. The brand`s values are timeless minimalism, substance and understated luxury. Less, but better. AEANCE is committed to creating garments with the least possible impact on the environment and has set up a supply chain focusing on eco-sustainability and ethical responsibility. The Women`s Light Padded Jacket of the look selected for ISPO is the result of a collaboration with the acclaimed industrial designer Konstantin Grcic.

Knowing the transformative power of fitness, DAQUÏNI® was founded in 2012 to help women bridge the gap between how they feel and how they think they look when they are working out. Each DAQUÏNI® item is made in the E.U. from highest quality Oeko-Tex® certified materials. The brand’s first choice in fabrics is SOFILETA (founded in 1911) with its luxurious technical fabrics with ROICA™ V550 premium stretch awarded with Cradle-to-Cradle Innovation Institute’s GOLD LEVEL material health certificate.

The New York based brand Erin Snow creates chemically safe, circularly designed, socially fair luxury performance apparel. The Teri pant is Erin Snow's most innovative and highly anticipated pant to date. Teri is made from the finest bluesign® approved Schoeller 4-way stretch fabric containing ROICA™ V550 premium stretch sustainable fiber. The pant is insulated with PrimaLoft® Gold Luxe and repels water and dirt without PFCs, thanks to Schoeller's ecorepel® Bio finishing while giving maximum freedom of movement.

The SCOTT Racing Team, the Italian Mtb Pro Rider Team born in 1988, selected the high performance for active clothing identifying Rosti, SITIP and ROICA™ as strategic partners to ensure unique and performant biking outfit composed by tights and jacket. Made with the special BEHOT fabric by SITIP, constructed with active performance materials belonging to the ROICA Feel Good™ family, it not only insulates, but generates up to 2 degrees of heat as you workout as certified by CeRism, Outdoor Sport Research Centre at Verona University. Long life stretch, superior shape retention and best breathability thanks to the Blizzard by SITIP fabric that ensures thermal comfort and easy care to the users. A valuable choice that perfectly matches the performances of an experienced team of specialists.

SITA hits the European panorama for the first time at ISPO with ROICA™ few days after the official launch in US and Saudi Arabia on January 31st. Its high-tech debut collection for Spring 2019 provides women with an all-new luxury concept of timeless foundational apparel made in New York balancing concealed performance features and style to meet womens’everyday dynamic lifestyle. The newly-created made in Italy SITATECH™ fabric includes permanent agents that neutralize odor, withstand machine wash, and exhibit superior quality. The intricately designed fabric takes on instant appeal with nanotechnology fibers and ROICA™ CF, a yarn with an active smart odor neutralizer property, then knitted in Italy by Maglificio Ripa.