From the Sector

With total sales of EUR 1,543 million, generated by over 30 production and sales units in Europe, Asia, and America, Radici Group closed its 2022 financial year with slight growth over 2021. EBITDA reached EUR 157 million in 2022, and net income for the year was EUR 80 million.

“We are moderately pleased with the 2022 figures,” Angelo Radici, president of RadiciGroup, commented. “Despite an unpredictable and challenging year, we were able to achieve positive results. Although the rise in energy costs began to be felt in January, we managed to maintain our position in the first three months of the year due to a significant increase in demand. From the second quarter onwards, the European market experienced a significant slowdown due to the outbreak of war in Ukraine, which exacerbated the already soaring costs of energy and raw materials. The situation was completely out of hand and made worse by the fact that some raw materials were not available. This created significant challenges for us, especially in the chemical sector. We even had to stop operations at our Novara plant in the latter part of the year. Products similar to ours in the nylon supply chain from China and the US were being sold at a price lower than our variable cost.”

The president continues: “At Group level, our internationalisation strategy helped us mitigate geopolitical risks in various countries. As a result, we were able to offset the challenges in the European chemicals and textile markets by leveraging our global presence in High Performance Polymers, where our numbers have held strong. As we began 2023, we regained our footing. However, the global economic and industrial scenario for the rest of the year remains highly uncertain, and forecasts are notably cautious.”

Even in these difficult times, the Group has continued to invest. In 2022, the High Performance Polymers Business Area completed the acquisition in India of the engineering plastics branch of Ester Industries Ltd, a listed company. Additionally, it began installing two new production lines in Mexico and Brazil, and confirmed plans to install a new extrusion line at the Villa d’Ogna production site in the province of Bergamo. These choices align with the Group’s goal of enhancing its worldwide presence and boosting competitiveness in high-potential growth markets. In a year where energy and raw material costs were certainly problematic, operating in geographically diverse markets and with varied applications proved to be an important tool in addressing the challenges. In this vein, a new production site spanning over 36,000 square metres has recently been inaugurated in China. The move is aimed at doubling the production capacity in line with the market’s growth expectations.

Extending the time horizon to 2018-2022, the Group has invested over EUR 277 million to enhance the competitiveness of its companies, implement Best Available Techniques, improve energy efficiency, reduce emissions, and conduct research and development activities aimed at introducing sustainable processes and solutions. These efforts include the research and development activities of Radici InNova, which are heavily focused on the circular economy.

Lectra supports the transformation of fashion, automotive and furniture companies by providing them with technological solutions that accelerate their transition to a more efficient and more sustainable Industry 4.0. In February, as part of the launch of its new roadmap, Lectra confirmed the importance of CSR in its strategy and presented its new priority measures for 2023-2025. By joining the UN Global Compact, Lectra demonstrates its commitment to reaching the Sustainable Development Goals of the United Nations.

Over the last few years, Lectra has stepped up its CSR initiatives. In 2011, the company implemented a CSR purchasing charter that covered 98% of its industrial purchases in 2022, excluding Gerber Technology (which was acquired in June 2021). In 2023, the new version of our CSR purchasing charter will be extended to Gerber suppliers, with the objective of enrolling 90% of all our industrial suppliers by 2025. Lectra also favors local procurement and production, as demonstrated by the recent inauguration of its manufacturing facility in Tolland, United States.

Another example: knowing that textiles generate 90% of the CO₂ emissions produced during the total lifecycle of a cutting room, Lectra strives to offer its customers solutions that optimize the use of materials. Lectra's equipment makes it possible to achieve material saving of 5 to 10%. In addition, to better inform consumers about product authenticity and provenant, the company has also expanded its software offer to material traceability, as show by the recent majority acquisition of TextileGenesis’ capital. Lectra is committed to systematically using eco-design principles by 2025 for its new equipment platforms in order to reduce its environmental footprint.

For 2023-2025, Lectra has decided to focus on 5 key areas through 12 measures:

1. MEETING THE HIGHEST ETHICAL STANDARDS
   - Uncompromising business ethics
   - Extension of our CSR purchasing policy
2. DESIGNING ECO-RESPONSIBLE OFFERS
   - Developing eco-designed products and services
   - Supplying products and services that help reduce our customers’ impact on the environment
   - Developing safe, accessible and easy-to-use solutions
3. FOSTERING AN INCLUSIVE, DIVERSE AND STIMULATING WORKING CULTURE
   - Zero tolerance for discrimination and harassment and equal opportunities for everyone
   - A working environment conducive to employee engagement
   - Balance between work and private life
   - Sustainable development of talents, team expertise and professional careers
   - Employees’ health and safety
4. REDUCING THE ENVIRONMENTAL FOOTPRINT OF OUR ACTIVITIES
   - Reducing the environmental impact of our company's activities
5. SUPPORTING FUTURE GENERATIONS
   - Supporting the development of professional skills and the employability of future generations

The Sorting for Circularity USA consortium project welcomes new partners and expands its North American geographical scope. Fashion for Good is pleased to announce the addition of lululemon as an external brand partner, joining the existing seven brand partners. They also welcome their new implementation partners Helpsy, United Southern Waste Material, Goodwill Industries International Inc., and its members Goodwill of Colorado, Goodwill Industries-Suncoast, Inc., Goodwill of the Finger Lakes, and Goodwill of San Francisco Bay. Additionally, Fashion for Good is pleased to recognise adidas as the project's lead sponsor, facilitating the complete realisation of the project scope.

Fashion for Good, together with Resource Recycling Systems, launched the Sorting for Circularity USA consortium project in January 2023. The project will conduct an extensive consumer survey to map the journey of a garment from closet to end of use, and present a comprehensive snapshot of textile waste composition generated in the United States. The insights gained from this 18-month project will help to scale collection, sorting, and recycling innovations and inform decisions on necessary investments and actions.

Within the first 6 months, the project has expanded to cover 6 key states: California, Texas, Florida, New York, New Jersey and Colorado. Additional implementation partners have also signed on to support the fibre composition data analysis: Secondary Materials and Recycled Textiles (SMART) Association, Helpsy, United Southern Waste Material, and Goodwill Industries International Inc., with its members Goodwill of Colorado, Goodwill Industries-Suncoast, Inc., Goodwill of the Finger Lakes, and Goodwill of San Francisco Bay. Resource Recycling Systems will drive the dissemination and analysis of the consumer survey together with New York State Center for Sustainable Materials Management and Syracuse University Center for Sustainable Community Solutions, and execute the textile composition analysis using Matoha’s near infrared devices with advisory support from Circle Economy.

Demonstrating the importance of pre-competitive collaboration in tackling the industry’s biggest challenges, lululemon joins Eastman, H&M and Nordstrom as key project partners, together with Fashion for Good corporate partners adidas, Inditex, Levi Strauss & Co., and Target. Adidas' lead sponsorship ensures a deeper analysis of USA textile waste infrastructure and the identification of valuable opportunities for advancement.

In the USA, textile waste is the fastest-growing segment of the country's waste stream, with 85% of discarded textiles ending up in landfills*. Understanding the composition of material, volume and location of used textiles is crucial for capturing them and sorting them for the best and highest quality end use. Moreover, the range of national and regional geographies within the Sorting for Circularity project series enables for nuanced cross-country comparisons - revealing differences in the textile waste generated and infrastructure required.

Sorting for Circularity, a framework co-developed by Fashion for Good and Circle Economy, aims to (re)capture textile waste by unlocking the feedstock potential for recycling, expedite the implementation of game changing automated sorting technologies such as near-infrared spectroscopy and advanced textile-to-textile recycling, and drive circularity within the fashion value chain. The project builds on the success of Sorting for Circularity Europe and India, which revealed insights on material composition, volume, and location of used textiles and provided a solid foundation to accelerate textile recycling in those respective geographical locations.

*United States Environmental Protection Agency (2019). National Overview: Facts and Figures on Materials, Wastes and Recycling.

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

The EFI Reggiani ecoTERRA solution is an all-in-one solution for water-based pigment printing that requires no ancillary equipment for pre- and post-treatment. By reducing water, energy and chemicals consumption in the overall process, customers can now obtain a sustainable, direct-to-fabric printing solution. For the first time at ITMA, EFI Reggiani is presenting its full ecoTERRA line up of four models, including a 340 printing width, with speeds ranging from 150 to 600 sqm/hour. This allows customers to choose the best TCO/ROI based on output volume and speed range.
 
Reggiani ecoTERRA water-based pigment inks deliver excellent wet and dry fastness properties, sharpness in detail, and durability while also ensuring printhead longevity with reduced maintenance costs. Thanks to the enhanced polymerisation and finishing unit, EFI Reggiani ecoTERRA also provides an enhanced tactile experience and fabric softness.
 
In addition to highlighting EFI Reggiani’s sustainable product offering, the company will also demonstrate the significant productivity and efficiency advantages offered by its portfolio of high-speed, high-performance digital textile printers at ITMA 2023. Attendees will discover how mass production can transition to a digital, on-demand workflow with the high speeds and high print quality of the EFI Reggiani HYPER scanning printer and the next-generation EFI Reggiani BOLT XS single-pass textile printer.

Visitors to the booth also will see EFI Reggiani’s new proprietary end-to-end digital printing workflow and the latest enhancements to EFI Inèdit digital textile software. Inèdit, now part of EFI Reggiani, is one of the leading developers of raster image processors (RIPs) and related software for digital industrial textile printing. The EFI Reggiani end-to-end workflow with Inèdit integration boosts productivity and production capabilities for digital textile print operations while ensuring maximum security for customer’s designs thanks to two-level encryption.
 
EFI Reggiani QUERY, the user-friendly, advanced data analysis tool to measure printer performance, keep track of real costs per metre, and monitor water and energy consumption, will also be demonstrated.

Fong’s Europe will showcase the advanced features of its THEN Smartflow TSF at ITMA 2023.

These include the machine’s smart fabric transport system which ensures extremely even dyeing of the fabric through accurate control of the nozzle pressure and pump power, with movement through the machine via an PLC-controlled plaiting system and variable chamber adjustment depending on fabric characteristics.

The machine is equipped with a heat exchanger enabling it to heat the dyeing liquor quickly and efficiently, to reduce energy consumption. Its bath preparation unit and chemical dosing system ensure accurate and precise dosing of chemicals, dyestuff and salt, reducing chemical waste and optimising results while reducing process times.

The Smartflow TSF operates with a low liquor ratio of down to 1:2.5 with full loading of synthetic fabrics, which means that it requires less water to dye a given amount of fabric compared to traditional dyeing machines. This not only reduces the consumption of water and steam, but also the amount of wastewater generated.

The machine's control panel is easy to use, allowing operators to programme and monitor processes with ease.

ERCA, Patagonia® and YKK announce the implementation of ERCA’s REVECOL®, a sustainable, innovative chemical agent, in YKK’s dyeing processes at their Vietnam production sites transforms common waste material, such as exhausted vegetable cooking oil, into an upcycled, certified high performance, safe textile chemical. ERCA has invested in circular practices to take waste material and use them as feedstocks to create new responsible chemical products.

Always searching for new sustainable innovations, REVECOL® caught the attention of Patagonia®. Driven by the goal to utilize non-extractive chemistry in their supply chain wherever possible, the brand teamed up with ERCA and trim supplier YKK to deploy REVECOL®.

REVECOL® LV-TS has a carbon footprint that is 72% lower* than the more conventional chemical auxiliaries produced by ERCA. Today ERCA produces a wide range of high-performance chemical auxiliaries made from used vegetable oil that are ZDHC, bluesign® approved and GRS certified.

ERCA is one of the first companies to have GRS certified chemical products, opening the door to circular chemical auxiliaries.

As part of their Sustainability Vision 2050, YKK is constantly working to deploy more sustainable chemical processes in their production. The ability to replace a commonly used dye chemical with a lower impact version was a no-brainer for YKK’s Vietnam management. REVECOL® is not only more sustainable, it is also more efficient, reducing the use of the dyeing auxiliary by 20% to 30%, thus  helping to lower YKK’s overall chemical usage.

* bluesign® Product Carbon Footprint Report

As a global provider of sustainable woodfibre products, Sappi will be showcasing its solutions for the garment industry under the theme “Fashion meets Forest” at ITMA 2023 – with sublimation papers and its dissolving wood pulp, used for the production of garment fibres under the “Verve” brand name.

How can the woodfibre industry support a more sustainable garments market? Sappi is eager to answer this question at the ITMA and has created a “knowledge trail” for visitors to explore under the motto “Fashion meets Forest”. Visitors to the stand can follow the journey from wood via cellulose and fibre to the finished yarn and the printed garment.

Sublimation papers: Expanded production capacity in Carmignano
Sappi’s Transjet sublimation papers stand for fast, uniform ink transfer and minimal ink consumption. As a premium supplier, Sappi is constantly striving to meet its customers’ needs. So, at this year’s ITMA, various sublimation papers with optimised qualitative properties will be on show.

Sappi maintains the high quality of its coated Transjet and uncoated Basejet sublimation papers by regularly investing in new, state-of-the-art technologies. At the end of April, a new warehouse has been inaugurated at the Carmignano mill in Italy. In the next month’s, Sappi will further invest in two new converting machines with a width of 1.9 meters and 3.2 meters as well as in a fully automated packaging line. All the investments will support the company’s vision of having a complete in-house solution for the sublimation industry, have a positive impact on CO2 emission, satisfy the increased demand of their customers as well as further improve lead times.
 
“Verve” dissolving wood pulp for high-quality textiles
Sappi will also be showcasing its dissolving pulp (DP) brand “Verve”. DP provides the feedstock raw material toward producing rayon fibres such as Lyocell and viscose and further into yarns and fabrics. Textiles produced from wood based cellulosic fibres are noted for their breathability, colour fastness, softness, drape, absorbency and biodegradability. In addition to the garment industry, dissolving pulp is also used in various household and pharmaceutical products.

At ITMA 2023, XORELLA, a specialist in steam setting and conditioning equipment for yarns and fabrics, will launch XO AUTOMATION for the double door XO SELECT conditioning machine series, and XO SOLID, a new machine series to complement XO SMART, XO TREND and XO SELECT machines.

XO AUTOMATION
The new XO AUTOMATION system consists of roller conveyor systems for loading and unloading two-door XO Select conditioning machines. Additional pallet wrapping machine with a turntable, weighting station, label printer, safety fence and security system can complete the system. The XO Select controller and automation system can handle and store individual customer-specific material and packing programmes.  

XO SELECT and XO AUTOMATION are designed for yarn steaming on multiple pallet dimensions and heights up to 2,650mm. The linear material flow passing conveyor and steaming machine avoids any mix between steamed and un-steamed materials. XO AUTOMATION fills the gap between the XO automated moving platform and the fully automated transport system – from spinning hall to warehouse.

XO SOLID
The new cubical XO SOLID combines a high loading space of 1,800mm x 1,700mm x 4, 000mm (H x W x L) through double row pin trolleys or pallets for easy manual loading of six units on floor level without a pit or platform. XO SOLID is therefore designed for installations on upper floor levels. The new frame design combines all necessary components factory preinstalled on a single frame, for easy ‘plug and play’ installation at the customer site. Additional smaller steamer dimensions for two and four loading units are also at the planning stage.

The new XO SOLID incorporates all the renowned features of XORELLA machines based on the long term experience in high temperature dyeing vessel production of FONG’s, including:

• A Siemens controller with OPC UA interface and XO data tool for batch storage.
• A XO EcoPac waterless claw pump or two-stage water ring vacuum pump.
• A high energy efficient accumulator for steam, electric and combined heating.
• Vessel and piping in world-class stainless steel.
• European key components such as pumps, heating elements, valves and sensors

Established in Switzerland in 1967, XORELLA became known in the global textile industry for its innovative indirect steaming system. Since 2002 the company has been a member of the CHTC Fong’s International Group, and a member of SINOMACH Group (China National Machinery Industry Corporation) since 2019.

At ITMA 2023 in Milan from June 8-14 this year, Monforts is organising two free-to-attend seminars and discussions on the potential of green hydrogen as a new energy source for textile finishing, drying and related processes.

Monforts is currently leading a consortium of industrial partners and universities in the three-year WasserSTOFF project, launched in November 2022, that is exploring all aspects of this exciting and fast-rising new industrial energy option.
The target of the government-funded project is to establish to what extent hydrogen can be used in the future as an alternative heating source for textile finishing processes. This will first involve tests on laboratory equipment together with associated partners and the results will then be transferred to a stenter frame at the Monforts Advanced Technology Center (ATC).

To be considered “green”, hydrogen must be produced using a zero-carbon process that is powered by renewable energy sources such as wind or solar. Currently, the cleanest method of hydrogen production is electrolysis, using an electrically-powered electrolyzer to separate water molecules into hydrogen and oxygen. The purity of the hydrogen is also important, and impurities must be removed via a separation process.

“Despite all its advantages, there are obstacles to overcome on the way to widespread, economically-feasible green hydrogen use,” explains Monforts Textile Technologies Engineer Jonas Beisel. “Until there are widely available, reliable and economical sources of this clean power, the cost of producing it will remain prohibitive. The infrastructure is not yet there, and hydrogen also has a tendency to make steel brittle and subject to fracture, which is something that requires further investigation in both its transportation and use in industrial processing.
“Green energy’s potential as a clean fuel source is tremendous, but there is much we need to explore when considering its use in the textile finishing processes carried out globally on our industry-leading Montex stenter dryers and other machines.”

At its Advanced Technology Center (ATC) in Mönchengladbach, Monforts will be carrying out intensive tests and trials to assess the reliability of both processes and final products when different natural gas and hydrogen mixtures – up to 100% green hydrogen – are employed. The results will be closely analysed by the consortium partners because there are many parameters that at this stage remain unknown.

The aim, Beisel adds, is to both reduce CO₂ emissions and – following the rising prices and industry turbulence experienced by manufacturers over the past year or so – to further reduce a dependency on natural gas.

The three-year WasserSTOFF project is sponsored by Germany’s Federal Ministry for Economic Affairs and Climate Action, and with Monforts at the helm brings together industrial partners Pleva and NTB Nova Textil, with academic input from the Hochschule Niederrhein and the Technical University of Freiberg.

The international nonwovens community came together once again in Geneva this week for INDEX™23, with with 12,017 attendees from over 100 countries and 610 exhibitors from 43 countries joining the event.

Exhibitors made the most of the four intensive days to meet potential new customers and extend business with existing clients. As one of the world’s leading nonwovens exhibitions, INDEX™ demonstrated the latest breakthroughs and innovative developments across all nonwovens’ applications.

The INDEX™ Lab, an exchange hub displaying samples from innovations and new developments, also showcased the winners and runners up from each of the five categories of the INDEX™ Innovation Award. Open to any EDANA member company or exhibitor at INDEX™23, the winners were announced on the first day of the exhibition during a dedicated ceremony at the EDANA stand.

The winners (more infomation):

1. Nonwoven roll goods
   Winner: Suominen – HYDRASPUN® Circula Nonwoven
2. Finished products made from, or incorporating nonwovens
   Winner: Henkel – Smart Adult Care
3. Raw materials or components (e.g., fibre, binder, polymer, tape), of special relevance to the nonwovens industry and related converted products
   Winner: Fiberpartner – BicoBio
4. Innovation in machinery of special relevance to the nonwovens industry
   Winner: Curt G. Joa, Inc. – ESC-8™
5. Sustainable Product
   Winner: Sparkle Innovations – SugaFluff™

The "Nonwovens Journey", an immersive experience that takes a look at the innovative role of nonwovens, as well as how innovation has progressed in time around both sustainability, and how nonwovens are used in everyday life, also allowed visitors to discover the versatility of nonwovens.

Running alongside the exhibition itself, there was also a full programme of side events that were enjoyed by participants: Exhibitor Product Presentations from 33 exhibitors; a series of informative seminars covering a myriad of topics including medical nonwovens, sustainability, circular economy, geosynthetics, textiles, mobility, fair trade, gender equity, innovation, and market trends; country-specific briefings offering insights into the nonwovens market in various regions around the world; and a nonwovens tutorial intended as an induction to nonwovens for those new to the industry. These topics were all presented by leading industry experts and guest speakers, including among others, the World Trade Organization (WTO).

Concern for the environment has in recent years become increasingly important, and once again remained a key topic at INDEX™23, with companies pushing to achieve further CO₂ reductions and circularity across the supply chain.

Continuing on from its success during COVID-19, the INDEX™23 Mobile App and Virtual Platform was back. This tool offered participants – both in Geneva and those following from home – the chance to watch presentations live and interact with speakers, exhibitors, and other participants. Attendees were able to plan their visit and organize meetings, which was highly appreciated. Video recordings from the sessions will remain available online in the app and platform for the coming weeks.

The next INDEX™ will take place in three years from 21-24 April 2026.